In computer graphics, a raster graphics or bitmap image is a dot matrix data structure that represents a generally rectangular grid of pixels, viewable via a monitor, paper, or other display medium. Raster images are stored in image files with varying formats.
The CMYK color model is a subtractive color model, used in color printing, and is also used to describe the printing process itself. CMYK refers to the four inks used in some color printing: cyan, magenta, yellow, and key.
A raster image processor (RIP) is a component used in a printing system which produces a raster image also known as a bitmap. Such a bitmap is used by a later stage of the printing system to produce the printed output. The input may be a page description in a high-level page description language such as PostScript, PDF, or XPS. The input can be or include bitmaps of higher or lower resolution than the output device, which the RIP resizes using an image scaling algorithm.
The Ben Day process, named after illustrator and printer Benjamin Henry Day Jr., is a printing and photoengraving technique dating from 1879. While the Ben Day process is commonly described in terms of dots, other shapes may be used, such as parallel lines, textures, irregular effects, waved lines, etc.
Dot pitch is a specification for a computer display, computer printer, image scanner, or other pixel-based device that describes the distance, for example, between dots (sub-pixels) on a display screen. In the case of an RGB color display, the derived unit of pixel pitch is a measure of the size of a triad plus the distance between triads.
Stippling is the creation of a pattern simulating varying degrees of solidity or shading by using small dots. Such a pattern may occur in nature and these effects are frequently emulated by artists.
Screentone is a technique for applying textures and shades to drawings, used as an alternative to hatching. In the conventional process, patterns are transferred to paper from preprinted sheets, but the technique is also simulated in computer graphics. It is also known by the common brand names Zip-A-Tone, Chart-Pak (1949), and Letratone.
Frederic Eugene Ives was a U.S. inventor, born at Litchfield, Connecticut. In 1874–78 he had charge of the photographic laboratory at Cornell University. He moved to Philadelphia, Pennsylvania, where in 1885 he was one of the founding members of the Photographic Society of Philadelphia. He was awarded the Franklin Institute's Elliott Cresson Medal in 1893, the Edward Longstreth Medal in 1903, and the John Scott Medal in 1887, 1890, 1904 and 1906. His son Herbert E. Ives was a pioneer of television and telephotography, including color facsimile.
Photogravure is an intaglio printmaking or photo-mechanical process whereby a copper plate is grained and then coated with a light-sensitive gelatin tissue which had been exposed to a film positive, and then etched, resulting in a high quality intaglio plate that can reproduce detailed continuous tones of a photograph.
Color printing or colour printing is the reproduction of an image or text in color. Any natural scene or color photograph can be optically and physiologically dissected into three primary colors, red, green and blue, roughly equal amounts of which give rise to the perception of white, and different proportions of which give rise to the visual sensations of all other colors. The additive combination of any two primary colors in roughly equal proportion gives rise to the perception of a secondary color. For example, red and green yields yellow, red and blue yields magenta, and green and blue yield cyan. Only yellow is counter-intuitive. Yellow, cyan and magenta are merely the "basic" secondary colors: unequal mixtures of the primaries give rise to perception of many other colors all of which may be considered "tertiary."
Photoengraving is a process that uses a light-sensitive photoresist applied to the surface to be engraved to create a mask that shields some areas during a subsequent operation which etches, dissolves, or otherwise removes some or all of the material from the unshielded areas. Normally applied to metal, it can also be used on glass, plastic and other materials.
Dot gain, or tonal value increase, is a phenomenon in offset lithography and some other forms of printing which causes printed material to look darker than intended. It is caused by halftone dots growing in area between the original printing film and the final printed result. In practice, this means that an image that has not been adjusted to account for dot gain will appear too dark when it is printed. Dot gain calculations are often an important part of a CMYK color model.
LightJet is a brand of hardware used for printing digital images to photographic paper and film. LightJet printers are no longer manufactured but are however remanufactured and resold; and their lasers are still manufactured.
In the theory of photography, tone reproduction is the mapping of scene luminance and color to print reflectance or display luminance, with the aim of subjectively "properly" reproducing brightness and "brightness differences".
Error diffusion is a type of halftoning in which the quantization residual is distributed to neighboring pixels that have not yet been processed. Its main use is to convert a multi-level image into a binary image, though it has other applications.
Screenless lithography is a reprographic technique for halftoning dating to 1855, when the French chemist and civil engineer Alphonse Poitevin discovered the light–sensitive properties of bichromated gelatin and invented both the photolithography and collotype processes. After the invention of the halftone screen in the 1880s, screenless lithography was abandoned. Until the end of World War II, two kinds of photomechanically made plates were used in lithography: albumin plates and deep-etch plates. Presensitized plates appeared in the 1950s, and wipe–on plates appeared in the 1960s.
Stochastic screening or FM screening is a halftone process based on pseudo-random distribution of halftone dots, using frequency modulation (FM) to change the density of dots according to the gray level desired. Traditional amplitude modulation halftone screening is based on a geometric and fixed spacing of dots, which vary in size depending on the tone color represented. The stochastic screening or FM screening instead uses a fixed size of dots and a distribution density that varies depending on the color’s tone.
Gradation in art is a visual technique of gradually transitioning from one colour hue to another, or from one shade to another, or one texture to another. Space, distance, atmosphere, volume, and curved or rounded forms are some of the visual effects created with gradation.
