.510 DTC EUROP

Last updated
.510 DTC EUROP
TypeRifle
Place of origin France
Production history
DesignerEric Danis
Designed2000
Specifications
Parent case.50 BMG
Bullet diameter12.95 mm (0.510 in)
Neck diameter14.3 mm (0.56 in)
Shoulder diameter19.3 mm (0.76 in)
Base diameter20.4 mm (0.80 in)
Case length96.8 mm (3.81 in)
Overall length125.3 mm (4.93 in)
Case capacity19.175 cm3 (295.92  gr H2O)
Primer typeCCI#35 (.50 BMG)
Ballistic performance
Bullet mass/typeVelocityEnergy
41.9 g (647 gr) 910 m/s (3,000 ft/s)17,306 J (12,764 ft⋅lbf)

The .510 DTC EUROP is a French rifle cartridge developed by Eric Danis in order to comply with firearms legislation of .50 BMG rifles in Europe. In response to the .50 Caliber BMG Regulation Act of 2004, which banned future sales of .50 BMG shoulder-fired rifles in California, long-range shooters in that state have begun to adopt this cartridge as a manner of following the new legislation.

The .510 DTC EUROP uses the same bullet as the .50 BMG, but has slightly different case dimensions. The case is 0.100 inches (2.5 mm) shorter and uses a steeper shoulder than standard .50 BMG ammunition. .510 DTC cases can be made by shortening and then fire-forming .50 BMG cases. The new round has almost identical ballistics, but because of the different dimensions, rifles chambered for the .50 BMG cannot safely fire the .510 DTC, and vice versa, and therefore do not fall under the same legal prohibitions. .510 DTC rifles, like .50 BMG rifles outside California, are simply standard modern rifles and can be purchased as such.


Related Research Articles

<span class="mw-page-title-main">Carbine</span> Shortened version of a standard firearm

A carbine is a long gun that has a barrel shortened from its original length. Most modern carbines are rifles that are compact versions of a longer rifle or are rifles chambered for less powerful cartridges.

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">Caliber</span> Internal diameter of the barrel of a gun

In guns, particularly firearms, but not artillery, where a different definition may apply, caliber is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore matches that specification. It is measured in inches or in millimeters. In the United States it is expressed in hundredths of an inch; in the United Kingdom in thousandths; and elsewhere in millimeters. For example, a US "45 caliber" firearm has a barrel diameter of roughly 0.45 inches (11 mm). Barrel diameters can also be expressed using metric dimensions. For example, a "9 mm pistol" has a barrel diameter of about 9 millimeters. Since metric and US customary units do not convert evenly at this scale, metric conversions of caliber measured in decimal inches are typically approximations of the precise specifications in non-metric units, and vice versa.

<span class="mw-page-title-main">.50 BMG</span> Rifle cartridge designed by John Moses Browning

The .50 BMG, also known as 12.7×99mm NATO, and designated as the 50 Browning by the C.I.P., is a .50 in (12.7 mm) caliber cartridge developed for the M2 Browning heavy machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard service cartridge for NATO forces, as well as many non-NATO countries. The cartridge itself has been made in many variants: multiple generations of regular ball, tracer, armor-piercing (AP), incendiary, and saboted sub-caliber rounds. The rounds intended for machine guns are made into a continuous belt using metallic links.

<span class="mw-page-title-main">.338 Lapua Magnum</span> Finnish rifle cartridge

The .338 Lapua Magnum is a rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. Due to its use in the War in Afghanistan and the Iraq War, the cartridge has become widely available.

<span class="mw-page-title-main">.223 Remington</span> Firearms cartridge

The .223 Remington is a rimless, bottlenecked, centerfire rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command of the United States Army as part of a project to create a small-caliber, high-velocity firearm. The .223 Remington is considered one of the most popular common-use cartridges and is currently used by a wide range of semi-automatic and manual-action rifles.

<span class="mw-page-title-main">Wildcat cartridge</span> Custom cartridge for firearms

A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.

<span class="mw-page-title-main">6.5×55mm Swedish</span> Nordic 6mm centerfire cartridge

6.5×55mm Swedish, also known simply as 6.5×55mm, 6.5x55 SE, 6.5x55 Swede, or in its native military as 6.5 mm patron m/94, meaning "6.5 mm cartridge model 94", referring to 1894, is a first-generation smokeless powder rimless bottlenecked rifle cartridge. The cartridge has most users in the Scandinavian countries, where it is known as the 6,5×55 or just "the 6,5".

A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.

<span class="mw-page-title-main">8×60mm S</span>

The 8×60mm S is a rimless bottlenecked centerfire cartridge of German origin, dating back to the interbellum period between World War I and World War II. The bore has the same dimensions as the German 7.92×57mm Mauser service cartridge. The 8×60mm S can, due to its 83.6 mm (3.291 in) overall length, easily be chambered in standard sized Mauser 98 bolt-action rifles. In such military M98 bolt actions internal magazine boxes feature a magazine length of 84 mm (3.307 in).

The 7.62×45mm is a rimless bottlenecked intermediate rifle cartridge developed in Czechoslovakia. It is fired by the Czech Vz. 52 rifle, Vz. 52 light machine gun, and ZB-53 machine gun. The cartridge was later dropped from use when the Czech converted to the standard 7.62×39mm Warsaw Pact cartridge of the Soviet Union. Its muzzle velocity and muzzle energy are slightly higher than that of the 7.62×39mm cartridge, and is on par with the .30-30 Winchester cartridge, with equivalent projectiles.

<span class="mw-page-title-main">.50 Caliber BMG Regulation Act of 2004</span>

The .50 Caliber BMG Regulation Act of 2004 is a law in the state of California that effectively banned all .50 BMG-caliber rifles from being sold in the state. The law took effect on January 1, 2005.

The Whisper family of firearm cartridges is a group of wildcat cartridges developed in the early 1990s by J.D. Jones of SSK Industries. The Whisper Family was developed as a line of accurate, multi-purpose cartridges using relatively heavy rifle bullets for a given caliber in subsonic loads. The intention was to create an extremely accurate cartridge family for military, police, competition and specialized hunting markets that could also be easily sound suppressed.

<span class="mw-page-title-main">.17 Hornet</span> Rifle cartridge

The .17 Hornet is a .17 caliber centerfire rifle cartridge originally offered as a "wildcat cartridge" developed by P.O. Ackley in the early 1950s. He created this non-factory (wildcat) offering by simply necking-down the .22 Hornet to .17 caliber and fire-forming the resized cases in his new chamber design. The result was a small quiet cartridge capable of high velocity. Ackley mentions it as one of the most balanced of the .17 cartridges of his time; likely, this is still true.

The .416 Barrett, also known as 10.4×83mm, centerfire rifle cartridge is a proprietary bottlenecked centrefire rifle cartridge designed in 2005. It is an alternative to the large-caliber .50 BMG in long-range high-power rifles. It was designed in response to a request for a medium/heavy rifle cartridge combination that was issued from Naval Surface Warfare Center Crane Division in late 2004.

<span class="mw-page-title-main">7×64mm</span> German hunting rifle cartridge

The 7×64mm is a rimless bottlenecked centerfire cartridge developed for hunting. As is customary in European cartridges, the 7 denotes the 7 mm bore diameter and the 64 denotes the 64 mm (2.5 in) case length. The 7×64mm is a popular hunting cartridge in Central Europe due to its 11.95 mm (0.470 in) case head diameter and 84 mm (3.3 in) overall length allowing it to easily be chambered in the Mauser 98 bolt-action rifle that was once standard German military issue.

The delta L problem refers to certain firearm chambers and the incompatibility of some ammunition made for that chamber. ΔL is a Commission Internationale Permanente (C.I.P.) geometric dimensioning and tolerancing definition for cartridge cases that are longer than the chamber they have to fit in. "Delta L" essentially means "difference in length".

The 8×64mm S is a rimless bottlenecked centerfire cartridge developed as a military service round for the German Army who never issued it. As is customary in European cartridges the 8 denotes the 8 mm bullet caliber and the 64 denotes the 64 mm (2.52 in) case length.

Nosler produces six different hunting cartridges. The first to be introduced was .26 Nosler, followed by .28 Nosler, .30 Nosler, .33 Nosler, .22 Nosler, and .27 Nosler.