BSA Gold Star

Last updated

BSA Gold Star
1956 DBD34 Gold Star (modified)
Manufacturer BSA
Predecessor1936–1939 BSA Empire Star
Successor1971–1973 BSA B50 [ clarification needed ]
Class Standard
Engine 348 cc (21.2 cu in) (M24 and B32) 499 cc (30.5 cu in) (B34) alloy air cooled OHV 2V pushrod single
Bore / stroke M24 82 mm × 94 mm (3.2 in × 3.7 in)
ZB32 71 mm × 88 mm (2.8 in × 3.5 in)
B34 85 mm × 88 mm (3.3 in × 3.5 in)[ clarification needed ]
Compression ratio M24 7.75:1 (petrol) 12.5:1 (dope/alcohol[ clarification needed ])
ZB32 6.5, 8:1, 9:1, 13:1
B32 6.8:1, 7.5:1, 8:1, 9:1, 11:1
Top speed110 mph (180 km/h) (varies by model and options) [1]
Power Approx. 18–27 hp (13–20 kW) (M24 and B32) 34–42 hp (25–31 kW) (M34) (varies by model and options) [2] [1]
Ignition type Magneto
Transmission Wet multiplate clutch, 4-speed, chain
Frame type Steel full duplex
Suspension Front: telescopic fork, Rear: rigid from 1939, plunger from 1954; swinging arm
Brakes Front: single 8" or full-width 190 mm[ clarification needed ] drum cable actuated, hydraulic, Rear: 7" Drum, rod
Tyres Front: 3.0×19" Rear: 3.5×19"
Wheelbase 56 in (1,400 mm)
Seat height30.5 in (770 mm)
Weight380 lb (170 kg) [3]  (dry)
Fuel capacity4 imp gal (18 l; 4.8 US gal)
Fuel consumption45 mpgimp (6.3 L/100 km; 37 mpgUS) [3]
RelatedBSA B33
BSA Rocket Gold Star

The BSA Gold Star is a motorcycle made by BSA from 1938 to 1963. They were 350 cc and 500 cc single-cylinder four-stroke production motorcycles known for being among the fastest bikes of the 1950s. Being hand built and with many optional performance modifications available, each motorcycle came from the factory with documented dynamometer test results, allowing the new owner to see the horsepower (bhp) produced. [4]


The Gold Star was almost continuously developed over its lifetime by BSA's engineers and riders, who improved its capabilities and increased output from its essentially simple[ opinion ] push-rod petrol engine than had been thought possible[ by whom? ]. It was highly successful across almost all areas of motorcycle sport for well over a decade and is still regarded as a design icon of its era. [3]


In 1937, Wal Handley lapped the Brooklands circuit at over 100 mph (160 km/h) on a BSA Empire Star, and was awarded one of the traditional Gold Star badges. That inspired BSA to produce the BSA Gold Star. [5] The first Gold Star was an M24 model. It had an all alloy 82 mm × 94 mm (3.2 in × 3.7 in) bore and stroke, 496 cc (30.3 cu in) displacement, with a separate rocker box bolted to the aluminium head, pushrod valve actuation, an Elektron (magnesium alloy) gearbox with close ratio option, and a rigid frame made of light tubes devoid of sidecar attachment lugs. This model continued up to the start of World War II. [6]

There were two variants of the M24; 1938, JM24 and 1939, KM24. Several modifications were made to the design during its lifespan. The 1939 KM model used a redesigned crank and crankcase with timing gears on fixed shafts, supported by a strong steel "outrigger" plate (a feature carried on throughout the Gold Star's entire production period.) The earlier JM model had cams that ran directly in the timing cover, with the potential for premature wear, hence the re-design. Power outputs were around 30bhp. The cast Elektron gearbox was dropped in 1939 to use the side-valve M20's cast aluminium shell but with close gear ratios as an option. Some KM's were used by the military at the start of WW2. Very few of either model were produced, with numbers in the low hundreds for each.

1948 ZB32GS introduced

After the war, in 1945-46, BSA had introduced the iron engine 348 cc (21.2 cu in) B31 and subsequent 499 cc (30.5 cu in) B33. In preparation for the 1949 model season, and to attract sporting buyers, the 71 mm × 88 mm (2.8 in × 3.5 in) bore and stroke, all alloy 348 cc ZB32 type Gold Star was first shown at the Earls Court motorcycle show at the end of 1948, [7] [8] with a very large[ opinion ] list of optional components. Unlike the pre-war M24 engine the cylinder head was a strong one-piece casting, with the rockers incorporated into the unit. The all new spring frame had so-called plunger suspension, half-way between the earlier rigid and later swingarm types. These used undamped springs mounted on shafts and forgings either side of the rear wheel spindle and although they were an improvement over a rigid frame for the average road rider,[ opinion ] they came in time to be regarded by competition riders and racers as too heavy and poor handling.[ citation needed ] Once ordered the bike was assembled by hand, and the engine bench tested and not released unless an acceptable power output was achieved,[ citation needed ] which was around 25 bhp (19 kW), depending on specification.[ citation needed ] They were 20 lb (9.1 kg) lighter than the comparable 17 bhp (13 kW) cast-iron barrel and head B series single. They were almost immediately successful, winning the Manx Grand Prix Clubman's 350 class from 1949 and remained so until 1956 when the class was discontinued. They could be specified in tourer, trials, ISDT, scrambles, racing or "Clubman's" trim. [6] Racing models used the well established[ opinion ] Amal TT carburettor.

The rest of the 1948 BSA OHV B range "YB" models in the standard and competition forms had heavy but reliable[ opinion ] cast iron heads and barrels. BSA were known[ by whom? ] to experiment with new prototype components that were used as test mules by BSA's own riders at the time.[ citation needed ] It has been suggested[ by whom? ] that a very small number of YB32 competition engines may have had aluminium ZB32 type barrels and heads. These would have been "works" prototype bikes rather than true production Gold Stars.[ citation needed ]

In BSA's model numbering system Y denotes the year and B the range, followed by the engine number; YB is 1948, ZB is 1949, and so on, except that some models were available for more than one year so the number remained the same over that time. [7] [ better source needed ] All genuine[ peacock prose ] bench-tested Gold Stars had the addition of "GS" after the year and range letters; thus ZB32GS, followed by the actual engine number. A standard YB32 or subsequent years competition machine was not a Gold Star as it did not have a bench-tested engine or the full "GS" engine number. In subsequent years BSA produced competition machines delineated with a stamped "A" to signify an aluminium engine. They were not bench-tested Gold Star engines, despite the physical similarities and use of some of the same parts.

1949 ZB32GS and ZB34GS

1949 ZB34 Gold Star BSA Gold Star CB 34 499 cc 1949.jpg
1949 ZB34 Gold Star

In 1949 the B32 Gold Star was in full production. The 499 cc B34 Gold Star was introduced, with a modified heavier crankshaft, stronger drive side crankcase, larger diameter drive-side main-shaft and a different design main bearing. The 350 cc continued as before. Spring plunger frames were most commonly used, along with a standard B type rigid option for trials competition use. [7] [9] In 1950 both received larger 8" front brakes. In late 1951 the 500 gained a new barrel and Bert Hopwood design head with separate rocker box, and the 350 had a new barrel and head of that design the following year [6] The earlier 7+38 in (190 mm) connecting rod was shortened by 12 in (13 mm), which with other improvements gave a useful increase in power.[ opinion ] This engine redesign initially used sand-cast heads and barrels, still designated as ZB. After engine number ZB32GS-6001 production moved to die castings which allowed a more accurate and cleaner finish.

1953 BB34GS and BB32GS

In 1953, a swingarm duplex (twin front downtube) frame was introduced, although rigid and plunger frames were still available, along with a much improved gearbox for the new frames, with a choice of gear ratios [6] These frames and all later GS and pre-unit B series swingarm frames had a distinctive kink in the lower offside rail, to accommodate and protect the oil-pump casting on the lower timing-side crankcase. A small number of the early swingarm frames had a separate cast steel kink welded or brazed in place. Some modifications were also made to the general design so later frames are somewhat different from the BB type. In all later frames the frame rail was pressed out to form the kink. Some machines specified for lighter-weight competition use had no rear loops that normally held the pillion footrests. Due to the new frame a new larger and distinctive chrome plated fuel tank was introduced. The engines maintained the same die-cast barrel and head with separate rocker box design as with the late ZB models. The BB models remained in production for touring and trials competition use into 1954. [10]

1954 CB34GS and CB32GS

1954 CB32 Gold Star BSA Gold Star 350 cc 1954.jpg
1954 CB32 Gold Star

The new CB engine was introduced, (subsequently known as the Big Fin engine), given deeper and squarer finning, a 5 bolt head, quite soon[ when? ] changed to 8 bolts, a stronger crankshaft, an even shorter connecting rod at 6+1532 in (164 mm), oval flywheels (500), [11] improved valve gear with eccentric adjustment, and an Amal GP carburettor. [6] Power outputs were once again increased to around 30 and 38 bhp (22 and 28 kW) respectively.[ citation needed ]

1955 DB32GS and DB34GS

The DB Gold Star had an improved oil feed to the crankshaft, and finned front brakes. DB32 models had smaller exhaust valve than the CB32 and power increased slightly to over 30 bhp (22 kW).[ citation needed ] Power outputs of the 499 cc engines were developed to about 42 bhp (31 kW) over the next few years.[ citation needed ] The Clubman cam and timing option included a special silencer. At the end of this year the BB and CB models were discontinued. [6] The last batch of 350 cc DB32 machines left the factory in 1963. [12]

1956 DBD34

Motocross version from early 1960s BSA - Flickr - mick - Lumix.jpg
Motocross version from early 1960s

The 500 cc DBD34 was introduced in 1956, with clip-on handlebars, the same big finned alloy engine with a newly designed head, [7] 38 mm ( 1 1/2" ) bell-mouth Amal carburettor and swept-back exhaust. The DBD34 had a 110 mph (180 km/h) top speed. [13] The Gold Star dominated the Isle of Man Clubmans TT that year. [14] Later models had an ultra close-ratio gearbox (RRT2) [15] with a very high first gear, enabling 60 mph (97 km/h) plus before changing up to second. Amongst the options available were a tachometer and a 190mm full width front brake that gave a larger lining area than the standard 8" single sided unit. [15] A scrambles version was also offered. [16] Many of the machines were exported to the USA where there was high demand for them. A series of special models were made for this lucrative market.

Production ended in 1963. [3] [7]

Gold Star Daytona

1956 DBD34 Gold Star Daytona BSA 1956 DBD34 Gold Star Daytona 500cc 1 cyl ohv.jpg
1956 DBD34 Gold Star Daytona

In 1954, BSA wanted to win the prestigious United States Daytona 200 race. During the 1950s, the race was run partly on asphalt and partly on the beach at Daytona. A team of works prepared Gold Stars and A7 Shooting Stars were entered. The race was won by a Shooting Star with a Gold Star in 3rd place. A replica of the works Gold Star was offered to the public. The specification included a rigid frame, which saved 50 lb (23 kg) over the swinging-arm frame. [17] Engine modifications included using a 350cc head, which had a better downdraught angle, machined to 500cc dimensions and fitted with a large inlet valve. The engine produced 44bhp. [18] The model was also offered in subsequent years. [7] [19]

Rigid framed machines became successful on the USA "Flat Track" scene in the hands of riders such as Dick Mann and tuners like CR Axtell. Special lightweight rigid frames such as the "Trackmaster" were also produced by American makers specifically for this purpose.

A swinging arm version, known by the factory as "USA Short Circuit" was also produced in 1956 and 1957. [20] [ better source needed ]

Gold Star Catalina

In 1956, Chuck Minert won the Catalina Grand Prix on a modified Gold Star. [21] (The Catalina Grand Prix was a popular 100-mile race on the island of Santa Catalina off the coast of Los Angeles. [22] In 1956 more than 1,000 bikes started the race.) [21] Modifications included a larger fuel tank, an air scoop on the front brake and a 19" front wheel. [21]

US west coast BSA distributor, Hap Alzina, persuaded the factory to produce a replica named after the race. [21] The Gold Star Catalina was manufactured from 1959 to 1963. [7] [23]

End of production

Towards the end the Gold Star was only offered in scrambles, or Clubmans trim. In 1963 Lucas ceased to produce the magneto used in the B series, and that line of singles was ended. The demise of the Lucas magneto was a prime reason that BSA and Triumph reconfigured their pre-unit-construction parallel twins into engines with integral gearboxes, simultaneously converting the ignition system from magneto to battery and coil. [24] The Gold Star was not considered for progression to unit-construction, and instead the 250 cc BSA C15 was developed (via the B40) into the 500 cc B50. Although the B50 never attained the kudos of the DBD34,[ opinion ] a B50 fielded by Mead & Tomkinson once held the class lap record in the Production TT, as well as gaining a class 2nd at the 24-hour endurance races the Le Mans Bol d'Or [25] and a class win at the Montjuïc circuit in Barcelona. [26] CCM used BSA B50 bottom ends in their early specials. [27] [28]

New ownership

In 2021, the Mahindra Group, the new owners of the BSA marque, announced the return of the Gold Star into production. [29] [30]

The first units were shipped to the UK from their manufacturing base in India in October 2022 and expected to go on sale shortly thereafter through UK dealers.[ citation needed ]

Isle of Man TT wins

BSA Gold Stars won the following Isle of Man TT races.

YearRaceWinnerLapsTimeSpeed (mph)
1949 Clubmans Junior TTHarold Clark1.30.21.675.18 [31]
1950 Clubmans Junior TTB A Jackson2. [32]
1951 Clubmans Junior TTBrian Purslow2. [33]
1952 Clubmans Junior TTEric Houseley41:54:45.278.92 [34]
1953 Clubmans Junior TTDerek T Powell41.52.57.880.17 [35]
1954 Clubmans Senior TT Alistair King 41: [36]
1954Clubmans Junior TTPhillip Palmer41:50.39.481.83 [37]
1955 Clubmans Senior TT Eddie Dow 91:22:23 [38] 70.73
1955Clubmans Junior TTJimmy Buchan91:25:24.0 [38] 68.23
1956 Clubmans Senior TT Bernard Codd 31:18:40.6 [39] 86.33
1956Clubmans Junior TT Bernard Codd 31:22:48.4 [39] 82.02

See also


  1. 1 2 Brown, Roland (2006), The Ultimate History of Fast Motorcycles, Bath, UK: Parragon, pp. 72–73, ISBN   1-4054-7303-7
  2. Walker 2004, p. 44–45.
  3. 1 2 3 4 Siegal, Margie (September 2011). "1962 BSA Gold Star DBD34 - Classic British Motorcycles". Motorcycle Classics. Retrieved 21 January 2021.
  4. Lichter & d'Orleans 2014, p. 24.
  5. " Sidebar Fact". Archived from the original on 9 October 2007. Retrieved 10 December 2006.
  6. 1 2 3 4 5 6 " BSA Gold Star". Archived from the original on 30 December 2006. Retrieved 11 January 2007.
  7. 1 2 3 4 5 6 7 Jones, Rob; Trigwell, Ray. "BSAOC Year Listing". Archived from the original on 7 October 2019.
  8. "Bonhams : 1951 BSA 349cc Gold Star Frame no. ZB31 15423 Engine no. ZB32GS 3061". Retrieved 22 January 2021.
  9. "Competition and Gold Star Models". BSA 1949 catalogue. Retrieved 23 January 2021.
  10. Walker 2004, p. 114.
  11. Walker 2004, p. 64.
  12. Wright1992, p. 107.
  13. Wilson, Hugo. (1993) The Ultimate Motor-Cycle Book p.69 1960 BSA Gold Star DBD34. Dorling Kindersley ISBN   0751300438 Accessed and added 2014-08-24
  14. "BSA DBD34 Clubman Gold Star Buyers Guide & specifications". Retrieved 4 July 2018.
  15. 1 2 "BSA DBD34 Clubman Gold Star Buyers Guide Part 2". Retrieved 4 July 2018.
  16. "History - BSA Gold Star Owners Club". BSA Gold Star Owners Club.
  17. "Retrospective: BSA A7 Shooting Star 500cc: 1954-1962". Rider Magazine. 8 July 2013. Retrieved 4 July 2018.
  18. Walker 2004, p. 191.
  19. Walker 2004, p. 192.
  20. "Engine & Frame Numbers by Year - BSA Gold Star Owners Club". BSA Gold Star Owners Club. Retrieved 4 July 2018.
  21. 1 2 3 4 "BSA Gold Star Catalina Scrambler and Chuck Minert - 1959". Early Years Of MX. Archived from the original on 28 December 2016. Retrieved 4 July 2018.
  22. Madigan 2008, p. 23.
  23. White, Tom (20 May 2020). "Classic Motocross Iron: 1962 Bsa 500 Catalina Scrambler". Motocross Action Magazine. Retrieved 22 January 2021.
  24. Clarke 1996.
  25. Jones2014, p. 105.
  26. Jones 2014, pp. 104–105.
  27. " BSA B50". Archived from the original on 19 March 2006. Retrieved 8 January 2007.
  28. "". Archived from the original on 24 July 2012.
  31. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  32. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  33. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  34. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  35. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  36. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  37. "Race Results - Isle of Man TT Official Website". Retrieved 4 July 2018.
  38. 1 2 Cook, R. A. B. (ed.). Motor Cycling Sports Yearbook 1956. Temple Press Ltd. p. 159.
  39. 1 2 Cook, R. A. B. (ed.). Motor Cycling Sports Yearbook 1957. Temple Press Ltd. pp. 148–149.


Further reading

Related Research Articles

<span class="mw-page-title-main">Isle of Man TT</span> Annual motorcycle race held on the Isle of Man

The Isle of Man TT or Tourist Trophy races are an annual motorcycle racing event run on the Isle of Man in May/June of most years since its inaugural race in 1907. The event is often called one of the most dangerous racing events in the world as many competitors have died.

<span class="mw-page-title-main">AJS</span> British automobile and motorcycle manufacturer from 1909 to 1931

A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles till 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.

<span class="mw-page-title-main">Honda GB500</span> Type of motorcycle

The Honda GB500 'Tourist Trophy' is an air-cooled single-cylinder solo café racer motorcycle. It was first marketed in Japan in 1985 in two 400 cc and one 500 cc versions. In 1989, Honda introduced a third 400 cc version for Japan; and in 1989 and 1990 a 500 cc version was available in the United States.

<span class="mw-page-title-main">Phil Read</span> English motorcycle racer (1939–2022)

Phillip William Read, was an English professional motorcycle racer. He competed in Grand Prix motorcycle racing from 1961 to 1976. Read is notable for being the first competitor to win world championships in the 125 cc, 250 cc and 500 cc classes. Although he was often overshadowed by his contemporary, Mike Hailwood, he won seven FIM Grand Prix road racing world championships.

<span class="mw-page-title-main">Cotton (motorcycle)</span> Former British motorcycle manufacturer

The Cotton Motor Company, was a British motorcycle manufacturer of 11a Bristol Road, Gloucester, and was founded by Frank Willoughby Cotton in 1918. F.W. presided over the company until his retirement in 1953. The company was reconstituted as E. Cotton (Motorcycles) Ltd, and traded until 1980. The marque was later resurrected in the late 1990s by a business which manufactured replicas of earlier machines.

<span class="mw-page-title-main">Motorcycle frame</span> Frame of a motorcycle

A motorcycle frame is a motorcycle's core structure. It supports the engine, provides a location for the steering and rear suspension, and supports the rider and any passenger or luggage. Also attached to the frame are the fuel tank and battery. At the front of the frame is found the steering head tube that holds the pivoting front fork, while at the rear there is a pivot point for the swingarm suspension motion. Some motorcycles include the engine as a load-bearing stressed member; while some other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine.

<span class="mw-page-title-main">BSA B31</span>

The BSA B31 is a motorcycle that was produced by Birmingham Small Arms Company.

<span class="mw-page-title-main">BSA Rocket Gold Star</span> Type of motorcycle

The BSA Rocket Gold Star (RGS) was a 646 cc (39.4 cu in) air-cooled parallel twin motorcycle produced by Birmingham Small Arms Company (BSA) at Small Heath, Birmingham. Launched in February 1962, it was one of the final range of A10 twins, using a tuned A10 Super Rocket engine in the double-downtube Gold Star frame.

<span class="mw-page-title-main">Norton International</span> Type of motorcycle

The Norton International or Cammy Norton is a Norton Motors Ltd overhead cam (OHC) motorcycle built between 1931 and 1957.

<span class="mw-page-title-main">Featherbed frame</span> Motorcycle frame

The featherbed frame was a motorcycle frame invented by the McCandless brothers and offered to the British Norton motorcycle company to improve the performance of their racing motorcycles in 1950. It was considered revolutionary at the time, and the best handling frame that a racer could have. Later adopted for Norton production motorcycles, it was also widely used by builders of custom hybrids such as the Triton, becoming legendary and remaining influential to this day.

<span class="mw-page-title-main">BSA A7</span> Motorcycle

The BSA A7 was a 500cc motorcycle model range made by Birmingham Small Arms Company (BSA) at their factory in Armoury Road, Small Heath, Birmingham. The range was launched in 1946 using a 495 cc (30.2 cu in) long stroke engine. An improved 497 cc (30.3 cu in) version based on the BSA A10 engine was launched in 1950. The various A7 models continued in production with minor modifications until 1961/2 when they were superseded by the unit-construction A50 model.

<span class="mw-page-title-main">BSA Empire Star</span> British single cylinder 4-stroke motorcycle

The Empire Star was a standard motorcycle made by BSA at their factory in Small Heath, Birmingham. Named to commemorate the Silver Jubilee of King George V of the United Kingdom and advertised as The Masterpiece of the Industry, the Empire Star range was produced between 1936 and 1939, when it was developed into the BSA Gold Star and World War II stopped production.

Colin Jordan Seeley was a British motorcycle retailer who later became a motorcycle sidecar racer, motorcycle designer, constructor and retailer of accessories. In 1992 he was involved in running the Norton Rotary race team.

<span class="mw-page-title-main">BSA motorcycles</span> Former British motorcycle marque

BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

John Draper was an English professional motorcycle racer. He was a versatile rider competing in many diverse motorcycle competitions, most notably motocross in which he became the first British rider to win the European Motocross Championship in 1955. Draper also competed in trials, enduro and road racing competitions. He was a member of four victorious British Motocross des Nations teams in 1950, 1953, 1956 and 1959.

<span class="mw-page-title-main">BSA unit twins</span> Type of motorcycle

The BSA unit twins were a range of unit construction twin-cylinder motorcycles made by the Birmingham Small Arms Company (BSA) and aimed at the US market. A range of 500 cc (31 cu in), 650 cc (40 cu in) and 750 cc (46 cu in) twins were produced between 1962 and 1972, but they were really developments of the older pre-unit A7/A10 model range with less weight. The engines had a reputation for vibration, but acceleration was good for the time, to a top speed of 100 miles per hour (160 km/h).

<span class="mw-page-title-main">BSA A10 series</span> Motorcycle

The BSA A10 series was a range of 646 cc (39.4 cu in) air-cooled parallel twin motorcycles designed by Bert Hopwood and produced by Birmingham Small Arms Company at Small Heath, Birmingham from 1950 to 1963. The series was succeeded by the A65 unit construction models.

The MV Agusta 250 Bicilindrica was a 250 cc factory racing motorcycle manufactured by the Italian brand MV Agusta from 1957 to 1961. With this machine 11 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.

<span class="mw-page-title-main">BSA B44</span> Type of motorcycle

The BSA B44 was a series of 441 cc (26.9 cu in) unit construction single-cylinder OHV four-stroke motorcycles made by the Birmingham Small Arms Company between 1966 and 1970. The machines were developed from the BSA World Championship Motocross machines, which were themselves based on the C15/B40.

<span class="mw-page-title-main">BSA/Triumph racing triples</span> Type of motorcycle

The BSA/Triumph racing triples were three cylinder 750 cc racing motorcycles manufactured by BSA/Triumph and raced with factory support from 1969-1974. There were road racing, production racing, endurance racing and flat track variants. The machines were based on the road-going BSA Rocket 3/Triumph Trident.