Colt Model 1839 Carbine

Last updated
Colt Model 1839 Carbine
Colt Paterson Carbine at the Huntington Museum of Art.jpg
A surviving example of the early Colt Model 1836, a model that preceded the 1839
Type Carbine
Place of origin United States
Service history
Used byUnited States
Republic of Texas
Production history
Designer Samuel Colt
Manufacturer Patent Arms Manufacturing Company
Produced1838–1841
No. built950
VariantsColt Model 1839 Shotgun
Specifications
Mass10+12 lb (4.8 kg)
Length43 in (110 cm)
Barrel  length24 in (61 cm) (rare 28 in (71 cm) and 32 in (81 cm) examples)

Caliber .525
Action Single-action
Feed system6-round cylinder

The Colt Model 1839 Carbine is an early percussion revolving smoothbore carbine manufactured by the Patent Arms Manufacturing Company between 1838 and 1841. Produced alongside the Colt Second Model Ring Lever rifle (preceded by the First Model Ring Lever rifle, Samuel Colt's first manufactured firearm), the Model 1839 was the most popular longarm of the Patent Arms period. [1] The Model 1839 Carbine is differentiated from Colt's Ring Lever rifles by the lack of a cocking ring lever and the presence of an external hammer, which, when manually cocked, would rotate the six-shot cylinder to the next position. Approximately 950 Model 1839 Carbines were manufactured, and an additional shotgun variant, the Model 1839 Shotgun, was produced from 1839 to 1841 with approximately 225 manufactured. Though the United States Navy and Texas Navy purchased a number of Model 1839 Carbines, sales suffered due to the gun's high price and quality control issues.

Contents

Overview

A patent of the Colt Model 1839 Carbine Model 1839 Carbine Patent.jpg
A patent of the Colt Model 1839 Carbine

The Model 1839 Carbine features a standard 24-inch (61 cm) round barrel with a browned finish. The other metal parts are blued. [2] Although the 24-inch barrel length is most common, 28-inch (71 cm) and 32-inch (81 cm) lengths were produced. [1] The overall length of the 24-inch carbine is 43 inches (110 cm) and the weight of the firearm is 10+12 pounds (4.8 kg). [3] Unlike Colt Ring Lever rifles, the Model 1839 Carbine features a smoothbore barrel that is chambered in .525 caliber. The 2+12-inch (6.4 cm) six-shot cylinder features an elaborate roll scene including depictions of a naval battle, the Battle of Bunker Hill, and a hunter with lion. [2] [1] The front and rear edges of the cylinder were originally square, though by late production, the rear cylinder edge was rounded. Loading levers affixed to the right side of the frame were not present on early models, becoming standard during mid-production in August 1840. [2] [4] The stock is varnished walnut and the buttplate features a rounded heel. [1] [5]

The trigger guard on the Model 1839 Carbine is an oval in shape and features a "rearward spur" that continues along the bottom of the stock a short distance before curling back forming a small open circle. [2] [5] The Model 1839 is distinguished from the larger Ring Lever rifles by the lack of a ring lever in front of the trigger guard and the presence of an external hammer. Cocking the external hammer back rotates the cylinder to the next position. [2] [3]

Model 1839 Shotgun

The Model 1839 Shotgun is similar in appearance and operation to the Model 1839 Carbine. [2] [1] The shotgun features a 24-inch (61 cm) or 32-inch (81 cm) Damascus barrel. The six-shot cylinder is 3+12 inches (8.9 cm) long and features a roll scene which includes depictions of "the American eagle, a deer-hunting sequence, and an Indian with bird hunters." [1] The shotgun is chambered in 16 gauge, (.62 caliber) and lacks an attached loading lever. [2] [1]

Refurbished models

These models, which were original Model 1839 Carbines reacquired and refurbished by Colt in 1848, feature unadorned polished cylinders and case hardened furniture. In other aspects, these refurbished models are similarly finished to the original production run Model 1839 Carbine. Forty carbines were refurbished by Colt in this way. [2]

Production

In 1838, production of the Model 1839 Carbine began in the Patent Arms Manufacturing Company's factory in Paterson, New Jersey. Production lasted until 1841, with a total of about 950 firearms produced (serial numbers 1–950). Model 1839 Shotguns were manufactured from 1839 to 1841, with between 225 and 262 guns produced (serial numbers 1–225 or 262). [2] [1] [6] Approximately twenty-five variants of the Model 1839 Carbine were manufactured at some point during Patent Arms' tenure that featured an elongated 3+14-inch (8.3 cm) cylinder. These models were produced to accommodate a larger musket-sized charge of powder. [1]

Reception and use

Numerous Model 1839 Carbines were sold to several military organizations, though they were never adopted in any widespread manner. The Texas military was a major customer for Colt's new repeating weapons, purchasing several orders of the Model 1839 Carbines. [4] [7] The Texas Army purchased fifty carbines on August 3, 1839 for $55 each and an additional thirty carbines on October 5, 1839. Each order included accessories to the guns, such as ball molds and loading levers. [7] Also in 1839, the Texas Navy ordered 180 of Colt's Model 1839 Carbines. [4] The United States Navy purchased 360 carbines between 1840 and 1841 via four separate orders. [1] [4] These firearms were marked "WAT" by military inspector Captain William Anderson Thornton. [8] Tests conducted by the Navy demonstrated the delicacy of the carbine after only 160 carbines had been delivered by mid-1841. [5]

In 1841, Captain Edwin Vose Sumner conducted field trials with the Colt Model 1839 Carbine and the Jenks Carbine at Carlisle Barracks in Pennsylvania. Sumner's early tests of the two carbines led him to favor the Jenks, which he found to be "twelve rounds quicker than the Colt's carbines". Ultimately, Sumner found the Colt Model 1839 Carbine to be inadequate for military service. Over time, it was found that the cylinders of the Colt Carbine began to corrode due in part to material issues. This caused small holes to develop between the chambers that enabled chain fires to occur. [9] Despite the Model 1839's improvements in operation over Colt's Ring Lever rifles and high regard by Samuel Colt, the carbine failed to fulfill Colt's expectations. [1] [5] In addition to some of the aforementioned quality control problems, the carbine's high price proved undesirable for many consumers leading to fewer sales than expected. [10] [11]

The Model 1839 Carbine most likely saw action with the United States Marine Corps during the Mexican–American War. The carbines saw action during Winfield Scott's Mexico City campaign beginning with the landings at Veracruz and continuing inland towards Mexico City. [10]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Shotgun</span> Firearm intended for firing a junta of small to medium-sized pellets

A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs are also available.

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

Pump action is a type of manual firearm action that is operated by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer or striker, and then pushed forward to load a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action firearms are typically associated with shotguns, although it has been used in rifles, grenade launchers, as well as other types of firearms. A firearm using this operating mechanism is colloquially referred to as a pumpgun.

Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

Harrington & Richardson is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Winchester Model 1892</span> Lever-action centerfire rifle

The Winchester Model 1892 was a lever-action repeating rifle designed by John Browning as a smaller, lighter version of his large-frame Model 1886, and which replaced the Model 1873 as the company's lever-action for pistol-caliber rounds such as the .44-40.

<span class="mw-page-title-main">Colt's New Model revolving rifle</span> Rifle

The Colt New Model revolving rifles were early repeating rifles produced by the Colt's Manufacturing Company from 1855 until 1864. The design was essentially similar to revolver type pistols, with a rotating cylinder that held five or six rounds in a variety of calibers from .36 to .64 inches. They were mainly based upon the Colt Model 1855 Sidehammer Pocket Revolver developed by Elisha K. Root. Colt revolving pistols and rifles were attractive mainly because of their high rate of fire. They were used to a limited extent on the Pony Express and made a brief appearance in the American Civil War. However, the rifles were generally disliked by soldiers, and were ultimately discontinued due to serious design flaws.

<span class="mw-page-title-main">Colt Paterson</span> 1836 revolver by Samuel Colt

The Colt Paterson revolver was the first commercial repeating firearm employing a revolving cylinder with multiple chambers aligned with a single, stationary barrel. Its design was patented by Samuel Colt on February 25, 1836, in the United States, England and France, and it derived its name from being produced in Paterson, New Jersey. Initially this 5 shot revolver was produced in .28 caliber, with a .36 caliber model following a year later. As originally designed and produced, no loading lever was included with the revolver; a user had to partially disassemble the revolver to re-load it. Starting in 1839, however, a reloading lever and a capping window were incorporated into the design, allowing reloading without disassembly. This loading lever and capping window design change was also incorporated after the fact into most Colt Paterson revolvers that had been produced from 1836 until 1839. Unlike later revolvers, a folding trigger was incorporated into the Colt Paterson. The trigger became visible only upon cocking the hammer.

<span class="mw-page-title-main">Colt Lightning rifle</span> Slide action light rifle

The Colt Lightning Carbine or Colt Lightning Rifle was a slide-action (pump-action) rifle manufactured by Colt from 1884 until 1904 and was originally chambered in .44-40 caliber. Colt eventually made the Lightning Rifle in three different frame sizes, to accommodate a wide range of cartridges, from .22 Short caliber and .38-40 to .50-95 Express. Its profile resembles the pump-action rimfire rifles made by the Winchester Repeating Arms Company and Remington Arms. The Lightning saw use as a sporting arm in America and was adopted for use by the San Francisco Police Department, but was never as popular or as reliable as the various lever-action rifles of its day.

<span class="mw-page-title-main">Merrill carbine</span> Carbine

The Merrill carbine was a breechloader firearm designed by Baltimore, Maryland gunsmith and inventor James H. Merrill. It was one of several firearms either manufactured or altered by Merrill in fulfillment of contracts with the Union government during the U.S. Civil War.

<span class="mw-page-title-main">Colt Model 1855 Sidehammer Pocket Revolver</span> Revolver

The Colt Model 1855 Sidehammer, also known as the Colt Root Revolver after engineer Elisha K. Root (1808–1865), was a cap & ball single-action pocket revolver used during the American Civil War. It was made by the Colt's Patent Fire Arms Manufacturing Company

<span class="mw-page-title-main">Colt-Burgess rifle</span> Lever-action rifle

The Colt-Burgess rifle, also known as the 1883 Burgess rifle or simply the Burgess rifle, is a lever-action repeating rifle produced by Colt's Patent Firearms Manufacturing Company between 1883 and 1885. The Burgess rifle was Colt's only entrance into the lever-action rifle market, produced to compete with Winchester Repeating Arms Company's line of popular rifles. The 1883 Burgess rifle was designed and patented by Andrew Burgess, an American firearms designer and photographer, who sold the design to Colt.

<span class="mw-page-title-main">Colt Ring Lever rifles</span> Rifle

The Colt First Model Ring Lever rifle and Colt Second Model Ring Lever rifle are two early caplock revolving rifles that were produced by the Patent Arms Manufacturing Company between 1837 and 1841. The First Model, produced between 1837 and 1838, was the first firearm manufactured by Samuel Colt, developed shortly before the advent of the Colt Paterson revolver. The First Model was succeeded by the Second Model, produced between 1838 and 1841, which featured minor variations in design and construction. Both models are distinguished from later Colt revolving long-arms by the presence of a small ring lever located in front of the trigger. This lever, when pulled, would index the cylinder to the next position and cock the internal hidden hammer. Although complicated in design and prone to failures, fifty First Model rifles were ordered by the U.S. Army for use against Seminole warriors in the Second Seminole War.

<span class="mw-page-title-main">Repeating firearm</span> Firearms that can be discharged multiple times after a single ammunition reload

A repeating firearm or repeater is any firearm that is capable of being fired repeatedly before having to be manually reloaded with new ammunition into the firearm.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 Flayderman, Norm (2007). Flayderman's Guide to Antique American Firearms and Their Values. Iola, Wisconsin: Gun Digest Books. pp. 82–83. ISBN   9781440226519.
  2. 1 2 3 4 5 6 7 8 9 Tarr, James (2013). Standard Catalog of Colt Firearms. Gun Digest Books. p. 197198. ISBN   9781440237539.
  3. 1 2 Russell, Carl Parcher (1980). Guns on the Early Frontiers: A History of Firearms from Colonial Times Through the Years of the Western Fur Trade. University of Nebraska Press. p. 175. ISBN   9780803289031.
  4. 1 2 3 4 Castro, John (Spring 1979). "From the Beginning: Patent Arms Manufacturing Co., "Colts Patent"" (PDF). The American Society of Arms Collectors Bulletin. 40. The American Society of Arms Collectors: 45–46. Archived from the original (PDF) on 2014-08-10. Retrieved 2014-06-17.
  5. 1 2 3 4 Walter, John (2006). Rifles of the World. Iola, Wisconsin: Krause Publications. pp. 93–94. ISBN   9780896892415.
  6. Richardson, Jeffrey (2014). Head, Marlene (ed.). "Model 1839 Revolving Shotgun". Autry National Center of the American West. Archived from the original on December 25, 2015. Retrieved June 16, 2014.
  7. 1 2 Moore, Stephen L. (2007). Savage Frontier Vol. III: Rangers, Riflemen, and Indian Wars in Texas 1840-1841. University of North Texas Press. pp. 23–24. ISBN   9781574412284.
  8. Graf, John F. (2009). Standard Catalog of Civil War Firearms. Krause Publications. p. 247. ISBN   9781440226960.
  9. Tate, Thomas K. (2013). General Edwin Vose Sumner, USA: A Civil War Biography. McFarland. pp. 25–26. ISBN   9780786472581.
  10. 1 2 "Colt 1839 Revolving Percussion Rifle". National Rifle Association of America National Firearms Museum. Archived from the original on March 7, 2016. Retrieved June 16, 2014.
  11. Huston, James A. (1966). The Sinews of War: Army Logistics ; 1775 - 1953. Government Printing Office. p. 116. ISBN   9780160899140.