Xerox Corporation is an American global corporation that sells print and digital document products and services in more than 160 countries. Xerox is headquartered in Norwalk, Connecticut, though its largest population of employees is based around Rochester, New York, the area in which the company was founded. The company purchased Affiliated Computer Services for $6.4 billion in early 2010. As a large developed company, it is consistently placed in the list of Fortune 500 companies.
Duplicating machines were the predecessors of modern document-reproduction technology. They have now been replaced by digital duplicators, scanners, laser printers and photocopiers, but for many years they were the primary means of reproducing documents for limited-run distribution. The duplicator was pioneered by Thomas Edison and David Gestetner, with Gestetner dominating the market up until the late 1990's.
A spirit duplicator is a printing method invented in 1923 by Wilhelm Ritzerfeld and was commonly used for much of the rest of the 20th century. The term "spirit duplicator" refers to the alcohols that were a major component of the solvents used as "inks" in these machines. The device coexisted alongside the mimeograph.
In photography, reversal film is a type of photographic film that produces a positive image on a transparent base. The film is processed to produce transparencies or diapositives instead of negatives and prints. Reversal film is produced in various sizes, from 35 mm roll film to 8×10 inch sheet film.
A transparency, also known variously as a viewfoil, foil, or viewgraph, is a thin sheet of transparent flexible material, typically cellulose acetate, onto which figures can be drawn. These are then placed on an overhead projector for display to an audience. Many companies and small organizations use a system of projectors and transparencies in meetings and other groupings of people, though this system is being largely replaced by video projectors and interactive whiteboards.
Copying is the duplication of information or an artifact based on an instance of that information or artifact, and not using the process that originally generated it. With analog forms of information, copying is only possible to a limited degree of accuracy, which depends on the quality of the equipment used and the skill of the operator. There is some inevitable generation loss, deterioration and accumulation of "noise" from original to copy when copies are made. This deterioration accumulates with each generation. With digital forms of information, copying is perfect. Copy and paste is frequently used by a computer user when they select and copy an area of text or content.
The Open Mobile Alliance (OMA) is a standards body which develops open standards for the mobile phone industry. It is not a formal government-sponsored standards organization like the ITU, but a forum for industry stakeholders to agree on common specifications for products and services.
Refined Printing Command Stream, also known as RPCS, is a vector-based printing/duplicating control protocol, designed for communication between Microsoft Windows PC clients, and several lines of Ricoh copiers. Drivers provided by Ricoh install the chosen copier to behave as a printer device.
A screen is a device used in some tournaments in duplicate bridge that visually separates partners at the table from each other, in order to reduce the exchange of unauthorized information and prevent some forms of cheating. It is a panel made of plywood, spanned canvas or similar material, which is placed vertically, diagonally across the playing table, with a small door in the center and a slit beneath it. The door is closed during the bidding stage, and the players place their calls using bidding cards on a movable tray, which slides under the door. After the opening lead, the door is opened, but its size allows the players only to see the hands and cards played from the opposite side of the screen, not their partner's face.
A ceramic resonator is an electronic component consisting of a piece of a piezoelectric ceramic material with two or more metal electrodes attached. When connected in an electronic oscillator circuit, resonant mechanical vibrations in the device generate an oscillating signal of a specific frequency. Like the similar quartz crystal, they are used in oscillators for purposes such as generating the clock signal used to control timing in computers and other digital logic devices.
A lightbox is a translucent surface illuminated from behind, used for situations where a shape laid upon the surface needs to be seen with high contrast.
Riso Kagaku Corporation is a Japanese corporation which is the inventor, manufacturer, and distributor of the RISO Printer-Duplicator, a.k.a. Risograph.
In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. A related and somewhat synonymous term is single-instance (data) storage. This technique is used to improve storage utilization and can also be applied to network data transfers to reduce the number of bytes that must be sent. In the deduplication process, unique chunks of data, or byte patterns, are identified and stored during a process of analysis. As the analysis continues, other chunks are compared to the stored copy and whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times, the amount of data that must be stored or transferred can be greatly reduced.
Duplicate content is a term used in the field of search engine optimization to describe content that appears on more than one web page. The duplicate content can be substantial parts of the content within or across domains and can be either exactly duplicate or closely similar. When multiple pages contain essentially the same content, search engines such as Google and Bing can penalize or cease displaying the copying site in any relevant search results.
The form factor of a mobile phone is its size, shape, and style, as well as the layout and position of its major components.
The T-Mobile myTouch 4G Slide is a touchscreen slider smartphone designed and manufactured by HTC Corporation for T-Mobile USA's "myTouch" series of phones. It is the fourth of the myTouch family. The myTouch 4G Slide is the first myTouch to feature HTC Espresso 3.0, a graphical user interface similar to HTC Sense 3.0. Highlights include an 8-megapixel camera, the Genius Button, and a hardware keyboard.
A contact copier, is a device used to copy an image by illuminating a film negative with the image in direct contact with a photosensitive surface. The more common processes are negative, where clear areas in the original produce an opaque or hardened photosensitive surface, but positive processes are available. The light source is usually an actínic bulb internal or external to the device
A Diatype is a manual "typesetter machine" used for the phototypesetting of texts, printing them on a light-sensitive film, that can be used in different environments of the graphic arts industry.
