Edward Turner (motorcycle designer)

Last updated

Edward Turner
Edward Turner.jpg
Turner, on the occasion of his retirement in 1967, at a private function for BSA Triumph executives
Personal details
Born(1901-01-24)24 January 1901
Camberwell, United Kingdom
Died15 August 1973(1973-08-15) (aged 72)
Dorking, United Kingdom
Spouse(s)Edith Webley (1929–1939) (her death)
Shirley Watts (1952–1965?)(divorced)

Edward Turner (24 January 1901 15 August 1973) was an English motorcycle designer. He was born in Camberwell in the London Borough of Southwark, on the day King Edward VII was proclaimed King. [1] In 1915, Turner had his first ride on a motorcycle, a Light Tourist New Imperial.

Contents

Turner Special

On 16 April 1925 "The Motor Cycle" published drawings by Turner of an OHC single he had designed, using a series of vertically stacked gears to drive the overhead camshaft. A subsequent redesign used bevel gears to drive a vertical camshaft, operating the valves through rockers. The only shared aspects of the two designs were the bore and stroke, 74 mm × 81 mm (2.9 in × 3.2 in), with the barrel being sunk into the crankcases. The head could be removed from either design complete with undisturbed valve gear. [2]

Turner built his first bike in 1927, using his second design, a 350 cc OHC single. The Motor Cycle published a photograph of Turner's patented engine, mounted in his motorcycle called the Turner Special. [3] The Special was registered for road use with the London County Council as YP 9286. It used Webb forks, and a three-speed Sturmey-Archer gearbox. [2]

Ariel designer

By now, living at various addresses in Peckham and East Dulwich, in the London Borough of Southwark and running Chepstow Motors, a Peckham Road motorcycle shop with a Velocette agency, Turner conceived the Square Four engine in 1928. At this time he was looking for work, showing drawings of his engine design to motorcycle manufacturers. [4] The engine was essentially a pair of 'across frame' OHC parallel twins joined by their geared central flywheels, with a one-piece four-cylinder block (or Monobloc) and single head. [5] The idea for the engine was rejected by BSA, but adopted by Ariel. Thus it became the Ariel Square Four, and not the BSA Square Four. Turner was then invited by Jack Sangster to join Ariel.

By 1929, at Ariel, Jack Sangster had Edward Turner and Bert Hopwood working under Val Page in design. [6] Turner, now 28, married Edith Webley.[ citation needed ]

Ariel Square Four

Close-up of a 1932 Ariel Square Four 4F 600 cc engine Square Four Ariel 1932 Square Four 4.jpg
Close-up of a 1932 Ariel Square Four 4F 600 cc engine

The first Ariel Square Four 4F [7] was shown at the Olympia Motorcycle Show in 1930 in chain-driven overhead camshaft 500 cc form. This was heavier and slower than Turner's original prototype due to production changes made necessary by the Great Depression. To make up for the extra weight, Turner increased the engine capacity to 601 cc for the 1932 Model 4F6. Ariel went bankrupt in September 1932, but was bought by Sangster, who promoted Turner to chief designer. [6]

In 1936 Triumph decided to create separate motorcycle and car companies, and sell the motorcycle company. Ariel owner Jack Sangster bought it and changed the name to Triumph Engineering Company . The Ariel Square Four changed from the 4F 600 cc OHC version to the 4G OHV 995 cc version that year.

Triumph general manager and chief designer

Sangster made Turner, now 35, General Manager and Chief Designer. (In this new position Turner received a 5% commission on the company's net profits, and became a shareholder with 4.9% of the equity). The first thing he did was clear space on the production floor for an office and an adjoining drawing office. Val Page had left Triumph four months before and joined BSA. Bert Hopwood came to Triumph as Turner's Design Assistant. Ted Crabtree, who was also at Ariel before, became Chief Buyer, and Freddie Clarke was made Chief Development Engineer: both were motorcycle racers.

Turner examined the line of 250, 350 (3H) and 500 cc Mk 5 singles, and rationalised them into three sports roadsters: the Tigers 70, 80, and 90. He added single-tube frames, enclosed valve gear, upswept exhausts, polished cases, new paint designs, and chrome petrol tanks.

Triumph Speed Twin

Close-up of a 1938 Triumph Speed Twin 500 cc engine Triumph Speed Twin 500 cc 1937.jpg
Close-up of a 1938 Triumph Speed Twin 500 cc engine

In July 1937, Turner introduced the 500 cc Speed Twin, selling at £75. It was smaller and weighed five pounds less than the £70 Tiger 90, [8] and proved very successful. The 5T Speed Twin (some say based on the engine design of Turner's Riley Nine car) became the standard by which other twins were judged, and its descendants continued in production until the 1980s. The original 27 bhp parallel-twin was capable of exceeding 90 mph (145 km/h) [8] and weighed 361 lb (166 kg).

Turner's wife Edith died in a car crash near Coventry on 8 July 1939; the same crash which killed Gillian Lynne's mother and two other friends. Turner kept in contact with Gillian Lynne thereafter. [9]

Turner's "sprung hub" was supposed to go into production in 1941, adding 17 lb to the weight of a bike. But the war delayed its introduction until 1948.

In 1942, Turner designed a generator, using an all-alloy Triumph vertical twin engine, for the Air Ministry. After a heated disagreement with Jack Sangster, Turner quit his position at Triumph and promptly became chief designer at BSA, where he worked on a side-valve vertical twin for the War. Bert Hopwood was made Triumph's new designer and Sangster put him to work on a 500 cc side-valve twin competing for the same contract.

By 1943 Bert Hopwood completed the design, but it was never produced. Triumph's prototypes were released in February, before BSA's planned launch. The design later became the post-war TRW model. In late October, Turner went back to Triumph. Hopwood had been working on a design for a 700 cc inline four-cylinder engine that could produce 50 bhp, but Turner's return to Triumph put an end to that plan.

Turner was Managing Director once again by 1944.

The Speed Twin, Tiger 100 and 350 cc 3T models emerged in 1945. They now had telescopic forks, originally designed by Turner, but modified by Freddie Clarke after it was found that fork oil would spew out on bottoming.

Triumph T100 GP

1947 500 cc Triumph T100 GP Triumph GP 500 1947.jpg
1947 500 cc Triumph T100 GP

Ernie Lyons won the first Manx Grand Prix on a Tiger 100 built by Freddie Clarke using an alloy wartime generator engine and the unreleased sprung hub in 1946. Turner, away in America, and anti-racing, was furious when he heard, but threw Lyons a victory dinner anyway, and a small batch of replica T100 were made for sale. Clarke resigned and joined AMC as Chief Development Engineer. Bert Hopwood had an argument with Turner over racing, left Triumph, and stayed away for 14 years. [10]

The Mark I sprung rear hub was introduced in late 1947.[ citation needed ]

In 1948, Turner was persuaded to allow the entry of three 500 cc twins in the Senior TT, but none of them finished, so the experience only added to Turner's opposition to factory racing.[ citation needed ]

Triumph Thunderbird

One of the Montlhery 1949 model 6T Triumph Thunderbirds on display at the National Motor Museum in Beaulieu Triumph 6T Thunderbird.JPG
One of the Montlhery 1949 model 6T Triumph Thunderbirds on display at the National Motor Museum in Beaulieu

The 6T 650 cc Thunderbird, as designed by Turner, and further developed by Jack Wickes, was launched on 20 September 1949, when three models covered 500 miles at 90 mph (800 km at 145 km/h) in a demonstration at Montlhery. Essentially an enlarged tourer version of the Speed Twin, the 6T was designed to satisfy the substantial American export market, and was advertised as capable of a genuine 100 mph (161 km/h). The Thunderbird became a favourite of police forces worldwide.

For 1950, Turner went for a "low-chrome" policy, and banned the use of chrome fuel tanks. A chrome tank did not reappear till the 1981 Bonneville T140LE Royal Wedding edition.

Once in production, the first performance improvements came midway through the first year when the carburettor size was increased. This was the year Turner expressed the belief that 650 cc was the practical limit for the traditional British 360° vertical twin. It was the last year for the T100 GP model, although the T100C carried on, and the Mark 2 sprung hub was released.

Turner became involved in the establishment of the US-based Triumph Corp. in Maryland, a distribution company created to serve East Coast US markets. After 1950, America became Triumph's biggest customer.

In 1951 Sangster sold Triumph to BSA for £2.5 million, having previously sold Ariel to BSA in 1939. As part of the sale agreement, he joined the BSA Group as a member of the board. Turner's holdings in Triumph gave him 10% of the sale.

A race kit for the Tiger 100 was introduced, bikes were restyled with new paint and the first dual seat appeared. The Tiger 100 race kit was dropped, and the T100C came with the kit already installed. The T100C had twin-carburettors for this year only.[ citation needed ]

Triumph Terrier and Tiger Cub unit construction singles

1955 Triumph T15 Terrier at the Coventry Transport Museum 1955 Triumph T15 Terrier Coventry Transport Museum.jpg
1955 Triumph T15 Terrier at the Coventry Transport Museum

The first lightweight for Triumph since 1933, a 150 cc OHV Terrier T15, four-speed unit construction single with a sloping engine, was introduced in 1953. As a result, Triumph directors Turner, Bob Fearon and Alex Masters rode from Land's End to John O'Groat's for a 1,000-mile Terrier demonstration and publicity stunt – the "Gaffers' Gallop.". [11] [ citation needed ] .

By 1954 the sportier 200 cc version was available, and called the Tiger Cub. [12]

In 1952, Turner married Shirley Watts. They had two daughters and a son.

Triumph T110 Tiger

1954 650 cc Triumph T110 Triumph T 110 650 cc 1954.jpg
1954 650 cc Triumph T110

The production 650 cc Thunderbird was a low-compression tourer, and the 500 cc Tiger 100 was the performance bike. That changed in 1954, along with the change to swing arm frames and the release of the 650 cc Tiger 110, eclipsing the 500 cc Tiger 100 as the performance model.

Chief Executive of BSA Group (BSA, Ariel, Triumph, Daimler, and Carbodies)

In 1956, after a boardroom struggle over power and control, Jack Sangster became Chairman of BSA Group, succeeding Sir Bernard Docker. He appointed Turner Chief Executive of the Automotive Division (comprising BSA, Ariel, Triumph, Daimler and Carbodies – makers of London taxicabs).[ citation needed ]

Triumph 3TA unit construction twin

1958 350 cc Triumph Twenty-One with faired-in rear end and higher handlebars for the USA market 1958 Triumph Twenty One 01.jpg
1958 350 cc Triumph Twenty-One with faired-in rear end and higher handlebars for the USA market

The first unit construction twin-cylinder motorcycle made by Triumph, the 350 cc (21 ci) 'Twenty One' 3TA, designed by Turner and Wickes, was introduced for the 21st Anniversary of Triumph Engineering Co. Ltd in 1957. Unfortunately it also had the first "bathtub" rear enclosure, which proved to be a major styling mistake, with dealers reputedly having to remove enclosures to sell bikes. Turner's new unit Triumph Speed Twin, the 5TA, introduced in 1959 was a 500 cc version of this engine and was similarly styled. The 6T Thunderbird and T110 models also acquired the bathtub rear fairing. Although quickly mimicked by competitors, eventually Turner relented on this unpopular feature, the 'bathtub' becoming more and more abbreviated until disappearing altogether on the final 1966 versions. Sportier versions of both the 5TA (the Tiger 100) and 3TA (the Tiger 90)were produced from 1960 to 1974 and 1963–1969, respectively.

Triumph T120 Bonneville

Early T120 Bonnevilles from 1959 had the headlamp-nacelle and deeply valanced mudguards used on other models but were dropped from 1960 Triumph 1.jpg
Early T120 Bonnevilles from 1959 had the headlamp-nacelle and deeply valanced mudguards used on other models but were dropped from 1960

In 1958 a twin-carburettor version of the 650 engine emerged. Triumph test rider Percy Tait hit 128 mph on a prototype Bonneville T120 at the Motor Industry Research Association (MIRA) test track.[ when? ][ citation needed ] The "Bonnie" was a show stopper at the 1958 Earl's Court Motorcycle Show.

Turner, wary of racing and high-performance options, thought the Bonnie was a bad design and reputedly said to Frank Baker, Triumph's experimental department manager, "This, my boy, will lead us straight into Carey Street (where the bankruptcy courts were)."[ citation needed ]

Daimler V8 engines

Daimler SP250 also known as the 'Dart' DaimlerSP250Dart.jpg
Daimler SP250 also known as the 'Dart'

For 1959 Turner designed the hemi-head Daimler 2.5 & 4.5-litre V8 engines used in the Daimler SP250 sports car and Daimler Majestic Major respectively. The valve gear was more similar to the Chrysler Hemi than the Triumph motorcycle, itself based on Riley.

In 1960 Turner went for a tour of the Honda, Suzuki and Yamaha plants in Japan and was shaken by the scale of production.

By 1961 Turner was under pressure to retire. Bert Hopwood resigned from AMC, and accepted Turner's offer to work for Triumph as Director and General Manager. It was at this time that Hopwood conceived the idea of a three-cylinder bike and engineer Doug Hele completed the drawings. Daimler was sold to Jaguar, and Edward Turner's V-8 was put into a Jaguar Mark 2 body with an upgraded interior and trademark Daimler grille, and called the Daimler 2½ litre V8.

In 1962, the last year of the "pre-unit" models, Triumph used a frame with twin front downtubes, but returned to a traditional Triumph single front downtube for the unit construction models that followed.

From 1963 all Triumph engines were of unit construction.

1964 Triumph TR6R Trophy with Turner's unit 650 cc engine Triumph 64tr6r.jpg
1964 Triumph TR6R Trophy with Turner's unit 650 cc engine

Triumph Scooters

1965 Triumph Tina scooter (left) at Coventry Transport Museum 1965 Triumph Tina scooter Coventry Transport Museum.jpg
1965 Triumph Tina scooter (left) at Coventry Transport Museum

Two Turner-designed scooters were introduced, about 1958 the high-performance Triumph Tigress (also sold as the BSA Sunbeam) and in 1963 the Tina (later called the T10), a Turner-designed 100 cc automatic transmission scooter for shopping. [13]

Retirement

Turner retired as Chief Executive of the Automotive Division (which included motorcycles) in 1963, but retained his BSA Directorship. He was apparently by this time unhappy about the direction the company was taking. Bert Hopwood had hopes of being appointed Turner's successor, but the job went to BSA's Harry Sturgeon.

BSA management now took over Triumph policy completely. Sturgeon decided to streamline motorcycle operations after McKinsey, an international business consultant, recommended treating the two companies as one.

1966 saw Turner working on a large-displacement, four-cylinder engine design which was not built.

In 1967, Turner, at 66, retired from the BSA Board and Harry Sturgeon took his place. Unlike Turner, Sturgeon was convinced Triumph had to be involved in racing, and John Hartle won the 1967 Isle of Man TT production event on a Bonneville, just before Harry Sturgeon suddenly died, and was replaced by Lionel Jofeh.

Triumph Bandit and BSA Fury

In November 1970 the ailing company's last major press and trade launch was held. In the lineup was an ohc 350 cc twin with twin carburettors and five-speed transmission, designed by Turner (already retired) as his last project, and further refined by Bert Hopwood and Doug Hele. It was to be sold as both the Triumph Bandit and BSA Fury, each distinguished by minor cosmetic changes and paint schemes, with 34 bhp and capable of 110 mph. Although included in that year's brochures, financial problems forced cancellation of the model before any production. Several pre-production prototypes still exist. [14]

1971 Bandit prototype was Turner's concept but the version intended for production was by Doug Hele and Bert Hopwood Triumph Bandit 350cc.jpg
1971 Bandit prototype was Turner's concept but the version intended for production was by Doug Hele and Bert Hopwood

This model represented an attempt by BSA-Triumph to compete in the wider 350 cc category, being a large-selling engine-displacement at the time. In an early 1970s issue of Cycle Buyers Guide (a yearly listing of all available motorcycles) it was stated that in the year prior to that issue, Honda had sold more 350 cc motorcycles than Yamaha had sold motorcycles.

BSA-Triumph marketed two versions of exhaust system on the Bandit and Fury; the Street Scrambler 'SS' version had a high-mounted matt black system with both pipes on the same side, and the other version had bright-chromed exhausts conventionally mounted low on either side.

BSA-Triumph made a major media push with multi-page brochure inserts in all the major US Cycle publications, and the 350s were prominently displayed. This determined response was to challenge the Japanese by designing a competitive and aesthetically up-to-date 350.

The look was very well received and many enthusiasts were looking forward to their arrival but BSA-Triumph was in a deteriorating financial condition (labour disputes, unreliable electrical systems, oil-leaking engines, and ageing styling). With limited resources, the company made a decision not to produce any 350s, but to concentrate instead on the "proven models".

Commemoration

When the Royal Mail issued six postage stamps on 19 July 2005 each featuring a classic British motorcycle, Turner was the only designer cited by name in the accompanying presentation packet notes. This was in relation to the 47 pence stamp featuring his 1938 Triumph Speed Twin. [15]

In 2008, an address where Turner lived and worked in Peckham, South-East London was awarded a Blue plaque by Southwark Borough Council, following a popular public vote in 2007. [16] The Blue Plaque at 8 Philip Walk, where he lived whilst working for his father's bottle-brush factory itself now at 6 Philip Walk, was unveiled by his son, Edward Turner Jr on Sunday 25 October 2009 in the presence of his siblings, Jane Meadows and Charmian Hawley. [17] [18] [19]

Related Research Articles

Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. A new company, Triumph Motorcycles Ltd, based in Hinckley, gained the name rights after the end of the company in the 1980s and is now one of the world's major motorcycle manufacturers.

Matchless British motorcycle and automobile manufacturer

Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.

BSA Rocket 3/Triumph Trident 1960s/1970s British motorcycle made by Triumph Engineering, Meriden

The Triumph Trident and BSA Rocket 3 was a technically advanced, high-performance roadster motorcycle made by Triumph Engineering and BSA from 1968 to 1975, and sold under both the Triumph and BSA marques. Alongside the Honda CB750, and later the Kawasaki triples, it brought a new level of sophistication to street motorcycles, marking the beginning of the superbike era. The Honda CB750 overshadowed the Trident to be remembered as the 'first superbike', in spite of the Triumph Trident actually debuting before the Honda by a few weeks.

Triumph Tigress/BSA Sunbeam British scooter

The Triumph Tigress, also sold as the BSA Sunbeam, was a scooter designed to have good performance and handling for the motorcycle enthusiast. The entry of the BSA group into the scooter field was announced by Edward Turner in October 1958. The 250 cc model would have a cruising speed of 55 to 60 mph and petrol consumption of 120 miles per imperial gallon. A prototype 250 cc BSA Sunbeam was displayed at the 1958 Earl's Court Cycle and Motor Cycle Show. Manufacture started in late 1959, but delivery difficulties were acknowledged due to problems with recruiting labour, although it was claimed that the group had a manufacturing capacity of 50,000 machines a year.

Unit construction

Unit construction is the design of larger motorcycles where the engine and gearbox components share a single casing. This sometimes includes the design of automobile engines and was often loosely applied to motorcycles with rather different internal layouts such as the flat twin BMW models.

Ariel Motorcycles

Ariel Motorcycles was a British maker of bicycles and then motorcycles in Bournbrook, Birmingham. It was an innovator in British motorcycling, part of the Ariel marque. The company was sold to BSA in 1951 but the brand survived until 1967. Influential Ariel designers included Val Page and Edward Turner. The last motorcycle-type vehicle to carry the Ariel name was a short-lived three-wheel tilting moped in 1970.

Herbert Hopwood was a British motorcycle designer. He was, at least, partly responsible for some of the most influential designs for the British motorcycle industry and worked for Ariel, Norton, BSA and Triumph.

Jack Sangster

John Young Sangster was a British industrialist and philanthropist. He was an important figure in the British motorcycle industry, where he was involved with Ariel, BSA and Triumph.

Doug Hele British motorcycle engineer

Douglas Lionel Hele was a pioneering British motorcycle engineer with Triumph and other firms: BSA, Douglas and Norton. He was born in Birmingham in 1919 and died in Hagley, Worcestershire on 2 November 2001.

BSA Golden Flash Type of motorcycle

The BSA Golden Flash, commonly referred to as the Gold Flash, was a 646 cc (39.4 cu in) air-cooled parallel twin motorcycle designed by Bert Hopwood and produced by Birmingham Small Arms Company (BSA) at Small Heath, Birmingham. The Golden Flash was the first model in the BSA A10 series. It was available in black and chrome; but it was the distinctive golden paint scheme that gave The Golden Flash its name. Production continued until 1963, when it was superseded by the BSA A65 Star.

Val Page

Valentine Page (1891–1978) was a British motorcycle designer, who worked for several of the UK's leading marques, including Ariel, Triumph, and BSA. Page was an innovator whose radical designs include the Triumph 6/1, BSA Gold Star, BSA A7 and BSA M20, the J.A.Prestwich engine of the Brough Superior SS100, and the Ariel Leader.

BSA A7 Motorcycle

The BSA A7 was a 500cc motorcycle model range made by Birmingham Small Arms Company (BSA) at their factory in Armoury Road, Small Heath, Birmingham. The range was launched in 1946 using a 495 cc (30.2 cu in) long stroke engine. An improved 497 cc (30.3 cu in) version based on the BSA A10 engine was launched in 1950. The various A7 models continued in production with minor modifications until 1961/2 when they were superseded by the unit-construction A50 model.

BSA Fury Type of motorcycle

The BSA Fury was a Birmingham Small Arms Company (BSA) prototype motorcycle made in 1970. Designed by Edward Turner but substantially redesigned by Bert Hopwood and Doug Hele, the Fury never went into commercial production due to the collapse of the BSA Group.

Triumph Bandit British motorcycle

The Triumph Bandit was a British motorcycle manufactured as a prototype by Triumph in 1970. Originally designed by Edward Turner as his last project it was subsequently substantially modified at Triumph by a greatly critical Bert Hopwood and Doug Hele. Despite their work, the Bandit never went into commercial production, and only five have survived, making them very rare.

Triumph Tiger 80 Type of motorcycle

The Triumph Tiger 80 is a British motorcycle first made by Triumph from 1937. There was also a 250cc Tiger 70 and a 500cc Tiger 90. Production of the Tiger ended with the outbreak of World War II and never resumed after the Triumph works at Priory Street in Coventry were completely destroyed during The Blitz in 1940 by heavy German bombing.

BSA motorcycles Former British motorcycle marque

BSA motorcycles were made by the Birmingham Small Arms Company Limited (BSA), which was a major British industrial combine, a group of businesses manufacturing military and sporting firearms; bicycles; motorcycles; cars; buses and bodies; steel; iron castings; hand, power, and machine tools; coal cleaning and handling plants; sintered metals; and hard chrome process.

BSA unit twins Type of motorcycle

The BSA unit twins were a range of unit construction twin-cylinder motorcycles made by the Birmingham Small Arms Company (BSA) and aimed at the US market. A range of 500 cc (31 cu in), 650 cc (40 cu in) and 750 cc (46 cu in) twins were produced between 1962 and 1972, but they were really developments of the older pre-unit A7/A10 model range with less weight. The engines had a reputation for vibration, but acceleration was good for the time, to a top speed of 100 miles per hour (160 km/h).

BSA A10 series Motorcycle

The BSA A10 series was a range of 646 cc (39.4 cu in) air-cooled parallel twin motorcycles designed by Bert Hopwood and produced by Birmingham Small Arms Company at Small Heath, Birmingham from 1950 to 1963. The series was succeeded by the A65 unit construction models.

Norton Model 7 Dominator Type of motorcycle

The Norton Model 7 Dominator was a 500 cc vertical twin motorcycle manufactured by the Norton Motorcycle Company from 1949 to 1955. It was the first of Norton's Dominator range of motorcycles. The engine was designed by Bert Hopwood and was a departure from Norton's previous practice of producing single-cylinder machines. The Model 7 was used in Japan as a police motorcycle.

References

  1. Ian Chadwick. "1883-1918: The Early Years". History of Triumph Motorcycles. Retrieved 15 January 2008.
  2. 1 2 "Drawing of overhead valve engine" (PDF). Veloce Publishing. Retrieved 15 January 2008.
  3. Ian Chadwick. "1919-1945: The Classic Years". History of Triumph Motorcycles. Retrieved 15 January 2008.
  4. "1955 Ariel". The Mathews Collection. Archived from the original on 9 November 2006. Retrieved 10 November 2006.
  5. "Square Four". RealClassic. Archived from the original on 3 January 2007. Retrieved 10 November 2006.
  6. 1 2 Smith, Robert (March–April 2013). "The Royal Ariel Square Four". Motorcycle Classics. 8 (4). Retrieved 23 April 2013.
  7. "Ariel History". Ariel North America. Archived from the original on 2 November 2005. Retrieved 10 November 2006.
  8. 1 2 The History of British Motoring (2007), Abbeydale Press. ISBN   978-1-86147-197-0. pp. 90–91.
  9. Lynne, Gillian A Dancer in Wartime: One girl's journey from the Blitz to Sadler's Wells(Chatto & Windus 2011) ISBN   0701185996
  10. Ian Chadwick. "1946-1962: Recovery and Growth". History of Triumph Motorcycles. Retrieved 15 January 2008.
  11. Travelling With Mr Turner by Nigel C Winter (2011 Panther Publishing ISBN   978-0-9564975-4-3)
  12. Mike Estall. "Terrier and Cub History". cubsite.com. Archived from the original on 28 September 2007. Retrieved 15 January 2008.
  13. Ian Chadwick. "1963-1972: The Glory Years". History of Triumph Motorcycles. Retrieved 15 January 2008.
  14. Clew, Jeff (2007). Edward Turner: The Man Behind the Motorcycles. Veloce Publishing. p. 133. ISBN   9781845840655.
  15. "Great Britain stamps - British Motorcycles - 19 July 2005 - from Norvic Philatelics". Norphil.co.uk. Retrieved 4 May 2010.
  16. Blue plaque winners 2007, Southwark Council, archived from the original on 2 September 2012. Retrieved 23 February 2022
  17. "Blue Plaque unveiled to Triumph Motorcycle designer". ITN.
  18. "Edward Turner Plaque Honour". British Dealer News.
  19. "Edward Turner, Britain's greatest motorcycle designer honoured". Sump publishing.