Fascine

Last updated
Templin Channel in Templin, Germany. The riverbank was strengthened with fascines. Templin channel.jpg
Templin Channel in Templin, Germany. The riverbank was strengthened with fascines.

A fascine /fəˈsn/ is a rough bundle of brushwood or other material used for strengthening an earthen structure, or making a path across uneven or wet terrain. Typical uses are protecting the banks of streams from erosion, covering marshy ground and so on. In war they are often used to create paths for tanks and other vehicles across uneven terrain.

Contents

Early military use

Two chandeliers stacked with fascines. Chandeliers-and-fascines.jpg
Two chandeliers stacked with fascines.

Fascine bundles were used in military defences for revetting (shoring up) trenches or ramparts, especially around artillery batteries, or filling in ditches from earlier military actions. They were also used as a visual obstruction, providing cover for sappers and engineers. Military fascine bridges were used on a regular basis by the Romans to cross obstacles. Subsequently, the use of fascines by military engineers continued almost wherever armies were deployed.

World Wars

British Mark V tanks carrying crib fascines, 1918. British Mark V Tanks With Crib Fascines 1918.jpg
British Mark V tanks carrying crib fascines, 1918.
A Churchill AVRE, carrying a fascine, crosses a ditch using an already deployed fascine, 1943. AVRE 01.jpg
A Churchill AVRE, carrying a fascine, crosses a ditch using an already deployed fascine, 1943.

First World War tanks, namely the British Mark IV, started the practice of carrying fascines on the roof, to be deployed to fill trenches that would otherwise be an obstacle to the tank. [1] These were constructed from the traditional bundles of brushwood used to make fascines since Roman times. Although these were cumbersome to deploy they proved an effective gap crossing device and were used widely by the tanks of the day that weighed up to about 30 tons.

In World War II the use of fascines continued as a gap crossing device and within the British Army these were launched from the Churchill AVRE - a Royal Engineer derivative of the standard Churchill tank (40 tons).

The Imperial Japanese Army (IJA) pre-positioned fascines made of metal pipes across the Khalkha River (between Japanese held Manchuria and Mongolia, the USSR's protectorate,) in advance of the IJA's 1939 foray into Mongolia. The use of hollow pipes had been predicated on their ability to allow water flow; the pipes were secured such that they were awash, and the river's unimpeded flow initially hid the fascines from Soviet reconnaissance aircraft. While these fascines were designed for stealth rather than combat deployment and were not deployed via armoured vehicles, the use of hollow pipes as fascines was a significant step forward.

Developments since World War II

The pipe fascine was further developed in the British Army in the early 1980s to meet the challenges of assuring the mobility of movement in West Germany in the event of a NATO conflict with the Warsaw Pact.

Single fascine launch near Hannover - Centurion AVRE Single fascine.jpg
Single fascine launch near Hannover - Centurion AVRE

The majority of obstacles to mobility in West Germany run north–south, and movement by military forces would have been east–west. Within the area of operation of the British Army, near Hannover, there is a significant number of smaller gaps, mainly drainage ditches, streams and small rivers approximately 5–10 m wide and 1.5 – 2.5 m deep that are sufficient to stop armoured vehicles. Given the low number of AVLBs available, a solution was needed to bridge these gaps quickly and cheaply and under fire. In earlier wars, wooden fascines had been used, but these were ineffective for use with the much heavier modern vehicles, some of which weighed up to 70 tons.

The Royal Engineers Experimental Establishment at Christchurch did initial tests on the possible use of 9-inch high-density plastic pipes held together with chains. These would allow water flow, and not be damaged with the higher modern vehicle weight. Further development was done by Lt C Roebuck RE and his troop, 5 Troop, 31 Armoured Engineer Squadron, 32 Armoured Engineer Regiment at Munsterlager, North Germany in 1981/2, to enable full acceptance and provide user instructions for operational use. This development involved testing in different gaps and conditions, eg concrete line canals to earth banked rural field drainage channels, possibility of multiple fascine use in a single gap and launch testing both day, night and in limited visibility. During the trials the development team drivers became skilled at the launching of the fascine and were able to launch two or even 3 fascines into a single gap. However for regular operational use by less skilled crews it was recommended that only single fascines should be used as the use of 2nd or 3rd fascines required the launch vehicle to launch the subsequent fascine whilst on the potentially unstable first fascine. This required a perfect launch to ensure the second fascine was quickly in place to make the first fascine stable and held in position. If this did not happen there was potentially significant risk to the launch vehicle and crew especially in water filled gaps.

A launch technique was developed: approach the target gap at speed, line up onto alignment/ launch markers, drive over first marker then brake sharply at second marked point and fire the explosive bolts holding the travel hawsers so that the fascine, through inertia, rolled off the directly into the middle of the gap. When in position, they travel over it to level the road surface for other vehicles to cross. This whole process would take less than 1 minute, essential for an assault crossing possibly under fire.

Combat Engineer Tractor launch CET Launch.jpg
Combat Engineer Tractor launch

The fascine was subsequently accepted into service and used successfully in a number of operational and non-operational roles using the Centurion AVRE, a Centurion tank derivative with a bulldozer blade and 165mm demolition gun fitted. It was used in combat for the first time during the First Iraq war to breach anti tank ditches. The British Army now use the Trojan, based on the Challenger 2 tank, to carry and deploy pipe fascines.

See also

Related Research Articles

Armoured fighting vehicle Combat vehicle with both armament and armour

An armored fighting vehicle (AFV) is an armed combat vehicle protected by armour, generally combining operational mobility with offensive and defensive capabilities. AFVs can be wheeled or tracked. Main battle tanks, armoured cars, armoured self-propelled guns, and armoured personnel carriers are all examples of AFVs.

Military engineering vehicle vehicle for military construction or other military engineering support work

A military engineering vehicle is a vehicle built for the construction work or for the transportation of combat engineers on the battlefield. These vehicles may be modified civilian equipment or purpose-built military vehicles. The first appearance of such vehicles coinsided with the appearance of the first tanks, these vehicles were modified Mark V tanks for bridging and mine clearance. Modern military engineering vehicles are expected to fulfil numerous roles, as such they undertake numerous forms, examples of roles include; Bulldozers, cranes, graders, excavators, dump trucks, Breaching vehicles, Bridging vehicles, Military ferries, amphibious crossing vehicles, and Combat Engineer Section Carriers.

Churchill tank 1941 heavy infantry tank

The Tank, Infantry, Mk IV (A22) Churchill was a British heavy infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, its ability to climb steep slopes, and its use as the basis of many specialist vehicles. It was one of the heaviest Allied tanks of the war.

Centurion (tank) main battle tank

The Centurion was the primary British main battle tank of the post-Second World War period. Introduced in 1945, it is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s, and seeing combat in the front lines into the 1980s. The chassis was also adapted for several other roles, and these have remained in service to this day.

Operation Motorman was a large operation carried out by the British Army in Northern Ireland during the Troubles. The operation took place in the early hours of 31 July 1972 with the aim of retaking the "no-go areas" that had been established in Belfast and other urban centres. In Derry, Operation Carcan, initially proposed as a separate operation, was executed as part of Motorman.

Hobarts Funnies Modified tanks first used in the Normandy Landings

Hobart's Funnies were a number of unusually modified tanks operated during the Second World War by the 79th Armoured Division of the British Army or by specialists from the Royal Engineers.

Armoured warfare Military use of armored fighting vehicles

Armoured warfare or armored warfare, mechanised warfare or tank warfare is the use of armoured fighting vehicles in modern warfare. It is a major component of modern methods of war. The premise of armoured warfare rests on the ability of troops to penetrate conventional defensive lines through use of manoeuvre by armoured units.

79th Armoured Division (United Kingdom)

The 79th Armoured Division was a specialist armoured division of the British Army created during World War II. The division was created as part of the preparations for the Normandy invasion on 6 June 1944, D-Day. The division operated armoured vehicles modified for specialist roles, intended to assist with the landings on the beaches. The division remained in action during the North-west European Campaign, providing specialised support during assaults to the 21st Army Group and, occasionally, to American units.

Small Box Girder

The Small Box Girder bridge (SBG) was a small assault bridge that could be used to span gaps of up to 30 feet. It was typically carried on a tank, such as the Churchill Armoured Vehicle Royal Engineers (AVRE) or something similar, and could be deployed without engineers having to expose themselves to enemy fire. The design had been formally adopted by the British Army in 1932. Pre-war the SBG had quickly been copied by many countries around the world, including ironically Germany. The German Army called their version of the SBG the Kastenrager-Great. The United States was another country whose army created their own copy, designating it the H-20.

Tanks in World War I Wikimedia list article

The development of tanks in World War I was a response to the stalemate that had developed on the Western Front. Although vehicles that incorporated the basic principles of the tank had been projected in the decade or so before the War, it was the alarmingly heavy casualties of the start of its trench warfare that stimulated development. Research took place in both Great Britain and France, with Germany only belatedly following the Allies' lead.

The Giant Viper is a trailer-mounted, vehicle-pulled, mine clearance system, designed to be deployed in areas containing land mines. It was developed for the British Army in the 1950s. It was designed to be towed behind a Centurion gun tank, FV4003, AVRE ; and also the FV432 Armoured personnel carrier.

Armoured vehicle-launched bridge portable military bridge carried and emplaced by an armored vehicle

An armoured vehicle-launched bridge (AVLB) is a combat support vehicle, sometimes regarded as a subtype of military engineering vehicle, designed to assist militaries in rapidly deploying tanks and other armoured fighting vehicles across gap-type obstacles, such as rivers. The AVLB is usually a tracked vehicle converted from a tank chassis to carry a folding metal bridge instead of weapons. The AVLB's job is to allow armoured or infantry units to cross craters, anti-tank ditches, blown bridges, railroad cuts, canals, rivers and ravines), when a river too deep for vehicles to wade through is reached, and no bridge is conveniently located.

Puma armored engineering vehicle

The Puma is a heavily armored Combat engineering vehicle and armored personnel carrier that the Engineering Corps of the Israeli Defence Forces has used since the early 1990s. The vehicle can carry a crew of up to eight. The 50-ton vehicle's speed is 45 kilometers an hour.

Armoured Vehicle Royal Engineers armored engineering vehicle

Armoured Vehicle Royal Engineers (AVRE), also known as Assault Vehicle Royal Engineers is the title given to a series of armoured military engineering vehicles operated by the Royal Engineers (RE) for the purpose of protecting engineers during frontline battlefield operations.

The 1st Assault Brigade Royal Engineers was a specialisied armoured formation of the British Army active in World War II. It was formed in mid-1943 and its structure was three Assault Regiments of the Royal Engineers. It was assigned to the 79th Armoured Division in preparation for the Normandy invasion of 6 June 1944. The unit comprised armoured vehicles modified for specialist roles, intended to assist with the landing phase of the operation.

M3 Amphibious Rig amphibious vehicle

The M3 Amphibious Rig is a self-propelled amphibious bridging vehicle that is used for the projection of tanks and other vehicles across water obstacles.

T-26 variants

More than 50 different modifications and experimental vehicles based on the T-26 light infantry tank chassis were developed in the USSR in the 1930s, with 23 modifications going into series production. The majority were armoured combat vehicles: flame tanks, artillery tractors, radio-controlled tanks (teletanks), military engineering vehicles, self-propelled guns and armoured personnel carriers. They were developed at the Leningrad Factory of Experimental Mechanical Engineering by talented Soviet engineers P.N. Syachentov, S.A. Ginzburg, L.S. Troyanov, N.V. Tseits, B.A. Andryhevich, M.P. Zigel and others. Many Soviet tank engineers were declared "enemies of the nation" and repressed during Stalin's Great Purge from the middle of the 1930s. As a result, work on self-propelled guns and armoured carriers ceased in the USSR during that time. T-26 light tanks were also modified into armoured combat vehicles in the field during wartime.

Trojan Armoured Vehicle Royal Engineers

The Trojan Armoured Vehicle Royal Engineers (AVRE) is a combat engineering vehicle of the British Army. It is used to breach minefields and for many other tasks. It is currently in use with the Royal Engineers.

Tanks in the British Army

This article on military tanks deals with the history and development of tanks of the British Army from their first use in World War I, the interwar period, during World War II, the Cold War and modern era.

Tanks in the Israeli Army

This article deals with the history and development of tanks of the Israeli Army, from their first use after World War II in the establishment of the State of Israel after the end of the British Mandate, and into the Cold War and what today is considered the modern era.

References

  1. First World War - The Tank: New Developments - Willmott, H.P., Dorling Kindersley, 2003, Page 222

"Fascines as Ecojewels of the Landscape. Louis Laframboise. Biodynamic Association. https://www.biodynamics.com/blog/fascines-ecojewels-landscape