In computing, **floating-point arithmetic** (**FP**) is arithmetic using formulaic representation of real numbers as an approximation to support a trade-off between range and precision. For this reason, floating-point computation is often used in systems with very small and very large real numbers that require fast processing times. In general, a floating-point number is represented approximately with a fixed number of significant digits (the significand) and scaled using an exponent in some fixed base; the base for the scaling is normally two, ten, or sixteen. A number that can be represented exactly is of the following form:

- Overview
- Floating-point numbers
- Alternatives to floating-point numbers
- History
- Range of floating-point numbers
- IEEE 754: floating point in modern computers
- Internal representation
- Special values
- Other notable floating-point formats
- Representable numbers, conversion and rounding
- Rounding modes
- Binary-to-decimal conversion with minimal number of digits
- Decimal-to-binary conversion
- Floating-point arithmetic operations
- Addition and subtraction
- Multiplication and division
- Dealing with exceptional cases
- Accuracy problems
- Incidents
- Machine precision and backward error analysis
- Minimizing the effect of accuracy problems
- See also
- Notes
- References
- Further reading
- External links

where significand is an integer, base is an integer greater than or equal to two, and exponent is also an integer. For example:

The term *floating point* refers to the fact that a number's radix point (*decimal point*, or, more commonly in computers, *binary point*) can "float"; that is, it can be placed anywhere relative to the significant digits of the number. This position is indicated as the exponent component, and thus the floating-point representation can be thought of as a kind of scientific notation.

A floating-point system can be used to represent, with a fixed number of digits, numbers of different orders of magnitude: e.g. the distance between galaxies or the diameter of an atomic nucleus can be expressed with the same unit of length. The result of this dynamic range is that the numbers that can be represented are not uniformly spaced; the difference between two consecutive representable numbers varies with the chosen scale.^{ [1] }

Over the years, a variety of floating-point representations have been used in computers. In 1985, the IEEE 754 Standard for Floating-Point Arithmetic was established, and since the 1990s, the most commonly encountered representations are those defined by the IEEE.

The speed of floating-point operations, commonly measured in terms of FLOPS, is an important characteristic of a computer system, especially for applications that involve intensive mathematical calculations.

A floating-point unit (FPU, colloquially a math coprocessor) is a part of a computer system specially designed to carry out operations on floating-point numbers.

A number representation specifies some way of encoding a number, usually as a string of digits.

There are several mechanisms by which strings of digits can represent numbers. In common mathematical notation, the digit string can be of any length, and the location of the radix point is indicated by placing an explicit "point" character (dot or comma) there. If the radix point is not specified, then the string implicitly represents an integer and the unstated radix point would be off the right-hand end of the string, next to the least significant digit. In fixed-point systems, a position in the string is specified for the radix point. So a fixed-point scheme might be to use a string of 8 decimal digits with the decimal point in the middle, whereby "00012345" would represent 0001.2345.

In scientific notation, the given number is scaled by a power of 10, so that it lies within a certain range—typically between 1 and 10, with the radix point appearing immediately after the first digit. The scaling factor, as a power of ten, is then indicated separately at the end of the number. For example, the orbital period of Jupiter's moon Io is 152,853.5047 seconds, a value that would be represented in standard-form scientific notation as 1.528535047×10^{5} seconds.

Floating-point representation is similar in concept to scientific notation. Logically, a floating-point number consists of:

- A signed (meaning positive or negative) digit string of a given length in a given base (or radix). This digit string is referred to as the
*significand*,*mantissa*, or*coefficient*.^{ [nb 1] }The length of the significand determines the*precision*to which numbers can be represented. The radix point position is assumed always to be somewhere within the significand—often just after or just before the most significant digit, or to the right of the rightmost (least significant) digit. This article generally follows the convention that the radix point is set just after the most significant (leftmost) digit. - A signed integer exponent (also referred to as the
*characteristic*, or*scale*),^{ [nb 2] }which modifies the magnitude of the number.

To derive the value of the floating-point number, the *significand* is multiplied by the *base* raised to the power of the *exponent*, equivalent to shifting the radix point from its implied position by a number of places equal to the value of the exponent—to the right if the exponent is positive or to the left if the exponent is negative.

Using base-10 (the familiar decimal notation) as an example, the number 152,853.5047, which has ten decimal digits of precision, is represented as the significand 1,528,535,047 together with 5 as the exponent. To determine the actual value, a decimal point is placed after the first digit of the significand and the result is multiplied by 10^{5} to give 1.528535047×10^{5}, or 152,853.5047. In storing such a number, the base (10) need not be stored, since it will be the same for the entire range of supported numbers, and can thus be inferred.

Symbolically, this final value is:

where s is the significand (ignoring any implied decimal point), p is the precision (the number of digits in the significand), b is the base (in our example, this is the number *ten*), and e is the exponent.

Historically, several number bases have been used for representing floating-point numbers, with base two (binary) being the most common, followed by base ten (decimal floating point), and other less common varieties, such as base sixteen (hexadecimal floating point ^{ [2] }^{ [3] }^{ [nb 3] }), base eight (octal floating point^{ [4] }^{ [3] }^{ [5] }^{ [2] }^{ [nb 4] }), base four (quaternary floating point^{ [6] }^{ [3] }^{ [nb 5] }), base three (balanced ternary floating point ^{ [4] }) and even base 256^{ [3] }^{ [nb 6] } and base 65,536.^{ [7] }^{ [nb 7] }

A floating-point number is a rational number, because it can be represented as one integer divided by another; for example 1.45×10^{3} is (145/100)×1000 or 145,000/100. The base determines the fractions that can be represented; for instance, 1/5 cannot be represented exactly as a floating-point number using a binary base, but 1/5 can be represented exactly using a decimal base (0.2, or 2×10^{−1}). However, 1/3 cannot be represented exactly by either binary (0.010101...) or decimal (0.333...), but in base 3, it is trivial (0.1 or 1×3^{−1}) . The occasions on which infinite expansions occur depend on the base and its prime factors.

The way in which the significand (including its sign) and exponent are stored in a computer is implementation-dependent. The common IEEE formats are described in detail later and elsewhere, but as an example, in the binary single-precision (32-bit) floating-point representation, , and so the significand is a string of 24 bits. For instance, the number π's first 33 bits are:

In this binary expansion, let us denote the positions from 0 (leftmost bit, or most significant bit) to 32 (rightmost bit). The 24-bit significand will stop at position 23, shown as the underlined bit 0 above. The next bit, at position 24, is called the *round bit* or *rounding bit*. It is used to round the 33-bit approximation to the nearest 24-bit number (there are specific rules for halfway values, which is not the case here). This bit, which is 1 in this example, is added to the integer formed by the leftmost 24 bits, yielding:

When this is stored in memory using the IEEE 754 encoding, this becomes the significand s. The significand is assumed to have a binary point to the right of the leftmost bit. So, the binary representation of π is calculated from left-to-right as follows:

where p is the precision (24 in this example), n is the position of the bit of the significand from the left (starting at 0 and finishing at 23 here) and e is the exponent (1 in this example).

It can be required that the most significant digit of the significand of a non-zero number be non-zero (except when the corresponding exponent would be smaller than the minimum one). This process is called *normalization*. For binary formats (which uses only the digits 0 and 1), this non-zero digit is necessarily 1. Therefore, it does not need to be represented in memory; allowing the format to have one more bit of precision. This rule is variously called the *leading bit convention*, the *implicit bit convention*, the *hidden bit convention*,^{ [4] } or the *assumed bit convention*.

The floating-point representation is by far the most common way of representing in computers an approximation to real numbers. However, there are alternatives:

- Fixed-point representation uses integer hardware operations controlled by a software implementation of a specific convention about the location of the binary or decimal point, for example, 6 bits or digits from the right. The hardware to manipulate these representations is less costly than floating point, and it can be used to perform normal integer operations, too. Binary fixed point is usually used in special-purpose applications on embedded processors that can only do integer arithmetic, but decimal fixed point is common in commercial applications.
- Logarithmic number systems (LNSs) represent a real number by the logarithm of its absolute value and a sign bit. The value distribution is similar to floating point, but the value-to-representation curve (
*i.e.*, the graph of the logarithm function) is smooth (except at 0). Conversely to floating-point arithmetic, in a logarithmic number system multiplication, division and exponentiation are simple to implement, but addition and subtraction are complex. The (symmetric) level-index arithmetic (LI and SLI) of Charles Clenshaw, Frank Olver and Peter Turner is a scheme based on a generalized logarithm representation. - Tapered floating-point representation, which does not appear to be used in practice.
- Where greater precision is desired, floating-point arithmetic can be implemented (typically in software) with variable-length significands (and sometimes exponents) that are sized depending on actual need and depending on how the calculation proceeds. This is called arbitrary-precision floating-point arithmetic.
- Floating-point expansions are another way to get a greater precision, benefiting from the floating-point hardware: a number is represented as an unevaluated sum of several floating-point numbers. An example is double-double arithmetic, sometimes used for the C type
`long double`

. - Some simple rational numbers (
*e.g.*, 1/3 and 1/10) cannot be represented exactly in binary floating point, no matter what the precision is. Using a different radix allows one to represent some of them (*e.g.*, 1/10 in decimal floating point), but the possibilities remain limited. Software packages that perform rational arithmetic represent numbers as fractions with integral numerator and denominator, and can therefore represent any rational number exactly. Such packages generally need to use "bignum" arithmetic for the individual integers. - Interval arithmetic allows one to represent numbers as intervals and obtain guaranteed bounds on results. It is generally based on other arithmetics, in particular floating point.
- Computer algebra systems such as Mathematica, Maxima, and Maple can often handle irrational numbers like or in a completely "formal" way, without dealing with a specific encoding of the significand. Such a program can evaluate expressions like "" exactly, because it is programmed to process the underlying mathematics directly, instead of using approximate values for each intermediate calculation.

In 1914, Leonardo Torres y Quevedo designed an electro-mechanical version of Charles Babbage's Analytical Engine, and included floating-point arithmetic.^{ [8] } In 1938, Konrad Zuse of Berlin completed the Z1, the first binary, programmable mechanical computer;^{ [9] } it uses a 24-bit binary floating-point number representation with a 7-bit signed exponent, a 17-bit significand (including one implicit bit), and a sign bit.^{ [10] } The more reliable relay-based Z3, completed in 1941, has representations for both positive and negative infinities; in particular, it implements defined operations with infinity, such as , and it stops on undefined operations, such as .

Zuse also proposed, but did not complete, carefully rounded floating-point arithmetic that includes and NaN representations, anticipating features of the IEEE Standard by four decades.^{ [11] } In contrast, von Neumann recommended against floating-point numbers for the 1951 IAS machine, arguing that fixed-point arithmetic is preferable.^{ [11] }

The first *commercial* computer with floating-point hardware was Zuse's Z4 computer, designed in 1942–1945. In 1946, Bell Laboratories introduced the Mark V, which implemented decimal floating-point numbers.^{ [12] }

The Pilot ACE has binary floating-point arithmetic, and it became operational in 1950 at National Physical Laboratory, UK. Thirty-three were later sold commercially as the English Electric DEUCE. The arithmetic is actually implemented in software, but with a one megahertz clock rate, the speed of floating-point and fixed-point operations in this machine were initially faster than those of many competing computers.

The mass-produced IBM 704 followed in 1954; it introduced the use of a biased exponent. For many decades after that, floating-point hardware was typically an optional feature, and computers that had it were said to be "scientific computers", or to have "scientific computation" (SC) capability (see also Extensions for Scientific Computation (XSC)). It was not until the launch of the Intel i486 in 1989 that *general-purpose* personal computers had floating-point capability in hardware as a standard feature.

The UNIVAC 1100/2200 series, introduced in 1962, supported two floating-point representations:

*Single precision*: 36 bits, organized as a 1-bit sign, an 8-bit exponent, and a 27-bit significand.*Double precision*: 72 bits, organized as a 1-bit sign, an 11-bit exponent, and a 60-bit significand.

The IBM 7094, also introduced in 1962, supports single-precision and double-precision representations, but with no relation to the UNIVAC's representations. Indeed, in 1964, IBM introduced hexadecimal floating-point representations in its System/360 mainframes; these same representations are still available for use in modern z/Architecture systems. However, in 1998, IBM included IEEE-compatible binary floating-point arithmetic to its mainframes; in 2005, IBM also added IEEE-compatible decimal floating-point arithmetic.

Initially, computers used many different representations for floating-point numbers. The lack of standardization at the mainframe level was an ongoing problem by the early 1970s for those writing and maintaining higher-level source code; these manufacturer floating-point standards differed in the word sizes, the representations, and the rounding behavior and general accuracy of operations. Floating-point compatibility across multiple computing systems was in desperate need of standardization by the early 1980s, leading to the creation of the IEEE 754 standard once the 32-bit (or 64-bit) word had become commonplace. This standard was significantly based on a proposal from Intel, which was designing the i8087 numerical coprocessor; Motorola, which was designing the 68000 around the same time, gave significant input as well.

In 1989, mathematician and computer scientist William Kahan was honored with the Turing Award for being the primary architect behind this proposal; he was aided by his student (Jerome Coonen) and a visiting professor (Harold Stone).^{ [13] }

Among the x86 innovations are these:

- A precisely specified floating-point representation at the bit-string level, so that all compliant computers interpret bit patterns the same way. This makes it possible to accurately and efficiently transfer floating-point numbers from one computer to another (after accounting for endianness).
- A precisely specified behavior for the arithmetic operations: A result is required to be produced as if infinitely precise arithmetic were used to yield a value that is then rounded according to specific rules. This means that a compliant computer program would always produce the same result when given a particular input, thus mitigating the almost mystical reputation that floating-point computation had developed for its hitherto seemingly non-deterministic behavior.
- The ability of exceptional conditions (overflow, divide by zero, etc.) to propagate through a computation in a benign manner and then be handled by the software in a controlled fashion.

A floating-point number consists of two fixed-point components, whose range depends exclusively on the number of bits or digits in their representation. Whereas components linearly depend on their range, the floating-point range linearly depends on the significand range and exponentially on the range of exponent component, which attaches outstandingly wider range to the number.

On a typical computer system, a * double-precision * (64-bit) binary floating-point number has a coefficient of 53 bits (including 1 implied bit), an exponent of 11 bits, and 1 sign bit. Since 2^{10} = 1024, the complete range of the positive normal floating-point numbers in this format is from 2^{−1022} ≈ 2 × 10^{−308} to approximately 2^{1024} ≈ 2 × 10^{308}.

The number of normalized floating-point numbers in a system (*B*, *P*, *L*, *U*) where

*B*is the base of the system,*P*is the precision of the significand (in base*B*),*L*is the smallest exponent of the system,*U*is the largest exponent of the system,

is .

There is a smallest positive normalized floating-point number,

- Underflow level = UFL = ,

which has a 1 as the leading digit and 0 for the remaining digits of the significand, and the smallest possible value for the exponent.

There is a largest floating-point number,

- Overflow level = OFL = ,

which has *B* − 1 as the value for each digit of the significand and the largest possible value for the exponent.

In addition, there are representable values strictly between −UFL and UFL. Namely, positive and negative zeros, as well as denormalized numbers.

Floating-point formats |
---|

IEEE 754 |

Other |

The IEEE standardized the computer representation for binary floating-point numbers in IEEE 754 (a.k.a. IEC 60559) in 1985. This first standard is followed by almost all modern machines. It was revised in 2008. IBM mainframes support IBM's own hexadecimal floating point format and IEEE 754-2008 decimal floating point in addition to the IEEE 754 binary format. The Cray T90 series had an IEEE version, but the SV1 still uses Cray floating-point format.^{[ citation needed ]}

The standard provides for many closely related formats, differing in only a few details. Five of these formats are called *basic formats*, and others are termed *extended precision formats* and *extendable precision format*. Three formats are especially widely used in computer hardware and languages:^{[ citation needed ]}

- Single precision (binary32), usually used to represent the "float" type in the C language family (though this is not guaranteed). This is a binary format that occupies 32 bits (4 bytes) and its significand has a precision of 24 bits (about 7 decimal digits).
- Double precision (binary64), usually used to represent the "double" type in the C language family (though this is not guaranteed). This is a binary format that occupies 64 bits (8 bytes) and its significand has a precision of 53 bits (about 16 decimal digits).
- Double extended, also ambiguously called "extended precision" format. This is a binary format that occupies at least 79 bits (80 if the hidden/implicit bit rule is not used) and its significand has a precision of at least 64 bits (about 19 decimal digits). The C99 and C11 standards of the C language family, in their annex F ("IEC 60559 floating-point arithmetic"), recommend such an extended format to be provided as "long double".
^{ [14] }A format satisfying the minimal requirements (64-bit significand precision, 15-bit exponent, thus fitting on 80 bits) is provided by the x86 architecture. Often on such processors, this format can be used with "long double", though extended precision is not available with MSVC. For alignment purposes, many tools store this 80-bit value in a 96-bit or 128-bit space.^{ [15] }^{ [16] }On other processors, "long double" may stand for a larger format, such as quadruple precision,^{ [17] }or just double precision, if any form of extended precision is not available.^{ [18] }

Increasing the precision of the floating-point representation generally reduces the amount of accumulated round-off error caused by intermediate calculations.^{ [19] } Less common IEEE formats include:

- Quadruple precision (binary128). This is a binary format that occupies 128 bits (16 bytes) and its significand has a precision of 113 bits (about 34 decimal digits).
- Decimal64 and decimal128 floating-point formats. These formats, along with the decimal32 format, are intended for performing decimal rounding correctly.
- Half precision, also called binary16, a 16-bit floating-point value. It is being used in the NVIDIA Cg graphics language, and in the openEXR standard.
^{ [20] }

Any integer with absolute value less than 2^{24} can be exactly represented in the single precision format, and any integer with absolute value less than 2^{53} can be exactly represented in the double precision format. Furthermore, a wide range of powers of 2 times such a number can be represented. These properties are sometimes used for purely integer data, to get 53-bit integers on platforms that have double precision floats but only 32-bit integers.

The standard specifies some special values, and their representation: positive infinity (+∞), negative infinity (−∞), a negative zero (−0) distinct from ordinary ("positive") zero, and "not a number" values (NaNs).

Comparison of floating-point numbers, as defined by the IEEE standard, is a bit different from usual integer comparison. Negative and positive zero compare equal, and every NaN compares unequal to every value, including itself. All finite floating-point numbers are strictly smaller than +∞ and strictly greater than −∞, and they are ordered in the same way as their values (in the set of real numbers).

Floating-point numbers are typically packed into a computer datum as the sign bit, the exponent field, and the significand or mantissa, from left to right. For the IEEE 754 binary formats (basic and extended) which have extant hardware implementations, they are apportioned as follows:

Type | Sign | Exponent | Significand field | Total bits | Exponent bias | Bits precision | Number of decimal digits | |
---|---|---|---|---|---|---|---|---|

Half (IEEE 754-2008) | 1 | 5 | 10 | 16 | 15 | 11 | ~3.3 | |

Single | 1 | 8 | 23 | 32 | 127 | 24 | ~7.2 | |

Double | 1 | 11 | 52 | 64 | 1023 | 53 | ~15.9 | |

x86 extended precision | 1 | 15 | 64 | 80 | 16383 | 64 | ~19.2 | |

Quad | 1 | 15 | 112 | 128 | 16383 | 113 | ~34.0 |

While the exponent can be positive or negative, in binary formats it is stored as an unsigned number that has a fixed "bias" added to it. Values of all 0s in this field are reserved for the zeros and subnormal numbers; values of all 1s are reserved for the infinities and NaNs. The exponent range for normalized numbers is [−126, 127] for single precision, [−1022, 1023] for double, or [−16382, 16383] for quad. Normalized numbers exclude subnormal values, zeros, infinities, and NaNs.

In the IEEE binary interchange formats the leading 1 bit of a normalized significand is not actually stored in the computer datum. It is called the "hidden" or "implicit" bit. Because of this, single precision format actually has a significand with 24 bits of precision, double precision format has 53, and quad has 113.

For example, it was shown above that π, rounded to 24 bits of precision, has:

- sign = 0 ;
*e*= 1 ;*s*= 110010010000111111011011 (including the hidden bit)

The sum of the exponent bias (127) and the exponent (1) is 128, so this is represented in single precision format as

- 0 10000000 10010010000111111011011 (excluding the hidden bit) = 40490FDB
^{ [21] }as a hexadecimal number.

An example of a layout for 32-bit floating point is

and the 64 bit layout is similar.

In the IEEE 754 standard, zero is signed, meaning that there exist both a "positive zero" (+0) and a "negative zero" (−0). In most run-time environments, positive zero is usually printed as "`0`

" and the negative zero as "`-0`

". The two values behave as equal in numerical comparisons, but some operations return different results for +0 and −0. For instance, 1/(−0) returns negative infinity, while 1/+0 returns positive infinity (so that the identity 1/(1/±∞) = ±∞ is maintained). Other common functions with a discontinuity at *x*=0 which might treat +0 and −0 differently include log(*x*), signum(*x*), and the principal square root of *y* + *xi* for any negative number *y*. As with any approximation scheme, operations involving "negative zero" can occasionally cause confusion. For example, in IEEE 754, *x* = *y* does not always imply 1/*x* = 1/*y*, as 0 = −0 but 1/0 ≠ 1/−0.^{ [22] }

Subnormal values fill the underflow gap with values where the absolute distance between them is the same as for adjacent values just outside the underflow gap. This is an improvement over the older practice to just have zero in the underflow gap, and where underflowing results were replaced by zero (flush to zero).^{ [4] }

Modern floating-point hardware usually handles subnormal values (as well as normal values), and does not require software emulation for subnormals.

The infinities of the extended real number line can be represented in IEEE floating-point datatypes, just like ordinary floating-point values like 1, 1.5, etc. They are not error values in any way, though they are often (but not always, as it depends on the rounding) used as replacement values when there is an overflow. Upon a divide-by-zero exception, a positive or negative infinity is returned as an exact result. An infinity can also be introduced as a numeral (like C's "INFINITY" macro, or "∞" if the programming language allows that syntax).

IEEE 754 requires infinities to be handled in a reasonable way, such as

- (+∞) + (+7) = (+∞)
- (+∞) × (−2) = (−∞)
- (+∞) × 0 = NaN – there is no meaningful thing to do

IEEE 754 specifies a special value called "Not a Number" (NaN) to be returned as the result of certain "invalid" operations, such as 0/0, ∞×0, or sqrt(−1). In general, NaNs will be propagated, i.e. most operations involving a NaN will result in a NaN, although functions that would give some defined result for any given floating-point value will do so for NaNs as well, e.g. NaN ^ 0 = 1. There are two kinds of NaNs: the default *quiet* NaNs and, optionally, *signaling* NaNs. A signaling NaN in any arithmetic operation (including numerical comparisons) will cause an "invalid operation" exception to be signaled.

The representation of NaNs specified by the standard has some unspecified bits that could be used to encode the type or source of error; but there is no standard for that encoding. In theory, signaling NaNs could be used by a runtime system to flag uninitialized variables, or extend the floating-point numbers with other special values without slowing down the computations with ordinary values, although such extensions are not common.

It is a common misconception that the more esoteric features of the IEEE 754 standard discussed here, such as extended formats, NaN, infinities, subnormals etc., are only of interest to numerical analysts, or for advanced numerical applications; in fact the opposite is true: these features are designed to give safe robust defaults for numerically unsophisticated programmers, in addition to supporting sophisticated numerical libraries by experts. The key designer of IEEE 754, William Kahan notes that it is incorrect to "... [deem] features of IEEE Standard 754 for Binary Floating-Point Arithmetic that ...[are] not appreciated to be features usable by none but numerical experts. The facts are quite the opposite. In 1977 those features were designed into the Intel 8087 to serve the widest possible market... Error-analysis tells us how to design floating-point arithmetic, like IEEE Standard 754, moderately tolerant of well-meaning ignorance among programmers".^{ [23] }

- The special values such as infinity and NaN ensure that the floating-point arithmetic is algebraically complete: every floating-point operation produces a well-defined result and will not—by default—throw a machine interrupt or trap. Moreover, the choices of special values returned in exceptional cases were designed to give the correct answer in many cases. For instance, under IEEE 754 arithmetic, continued fractions such as R(z) := 7 − 3/[z − 2 − 1/(z − 7 + 10/[z − 2 − 2/(z − 3)])] will give the correct answer on all inputs, as the potential divide by zero, e.g. for z = 3, is correctly handled by giving +infinity, and so such exceptions can be safely ignored.
^{ [24] }As noted by Kahan, the unhandled trap consecutive to a floating-point to 16-bit integer conversion overflow that caused the loss of an Ariane 5 rocket would not have happened under the default IEEE 754 floating-point policy.^{ [23] } - Subnormal numbers ensure that for
*finite*floating-point numbers x and y, x − y = 0 if and only if x = y, as expected, but which did not hold under earlier floating-point representations.^{ [13] } - On the design rationale of the x87 80-bit format, Kahan notes: "This Extended format is designed to be used, with negligible loss of speed, for all but the simplest arithmetic with float and double operands. For example, it should be used for scratch variables in loops that implement recurrences like polynomial evaluation, scalar products, partial and continued fractions. It often averts premature Over/Underflow or severe local cancellation that can spoil simple algorithms".
^{ [25] }Computing intermediate results in an extended format with high precision and extended exponent has precedents in the historical practice of scientific calculation and in the design of scientific calculators e.g. Hewlett-Packard's financial calculators performed arithmetic and financial functions to three more significant decimals than they stored or displayed.^{ [25] }The implementation of extended precision enabled standard elementary function libraries to be readily developed that normally gave double precision results within one unit in the last place (ULP) at high speed. - Correct rounding of values to the nearest representable value avoids systematic biases in calculations and slows the growth of errors. Rounding ties to even removes the statistical bias that can occur in adding similar figures.
- Directed rounding was intended as an aid with checking error bounds, for instance in interval arithmetic. It is also used in the implementation of some functions.
- The mathematical basis of the operations, in particular correct rounding, allows one to prove mathematical properties and design floating-point algorithms such as 2Sum, Fast2Sum and Kahan summation algorithm, e.g. to improve accuracy or implement multiple-precision arithmetic subroutines relatively easily.

A property of the single and double precision formats is that their encoding allows one to easily sort them without using floating-point hardware. Their bits interpreted as a two's-complement integer already sort the positives correctly, with the negatives reversed. With an xor to flip the sign bit for positive values and all bits for negative values, all the values become sortable as unsigned integers (with −0 < +0).^{ [26] } It is unclear whether this property is intended.

In addition to the widely used IEEE 754 standard formats, other floating-point formats are used, or have been used, in certain domain-specific areas.

- The Microsoft Binary Format (MBF) was developed for the Microsoft BASIC language products, including Microsoft's first ever product the Altair BASIC (1975), TRS-80 LEVEL II, CP/M's MBASIC, IBM PC 5150's BASICA, MS-DOS's GW-BASIC and QuickBASIC prior to version 4.00. QuickBASIC version 4.00 and 4.50 switched to the IEEE 754-1985 format but can revert to the MBF format using the /MBF command option. MBF was designed and developed on a simulated Intel 8080 by Monte Davidoff, a dormmate of Bill Gates, during spring of 1975 for the MITS Altair 8800. The initial release of July 1975 supported a single-precision (32 bits) format due to cost of the MITS Altair 8800 4-kilobytes memory. In December 1975, the 8-kilobytes version added a double-precision (64 bits) format. A single-precision (40 bits) variant format was adopted for other CPU's, notably the MOS 6502 (Apple //, Commodore PET, Atari), Motorola 6800 (MITS Altair 680) and Motorola 6809 (TRS-80 Color Computer). All Microsoft language products from 1975 through 1987 used the Microsoft Binary Format until Microsoft adopted the IEEE-754 standard format in all its products starting in 1988 to their current releases. MBF consists of the MBF single-precision format (32 bits, "6-digit BASIC"),
^{ [27] }^{ [28] }the MBF extended-precision format (40 bits, "9-digit BASIC"),^{ [28] }and the MBF double-precision format (64 bits);^{ [27] }^{ [29] }each of them is represented with an 8-bit exponent, followed by a sign bit, followed by a significand of respectively 23, 31, and 55 bits. - The Bfloat16 format requires the same amount of memory (16 bits) as the IEEE 754 half-precision format, but allocates 8 bits to the exponent instead of 5, thus providing the same range as a IEEE 754 single-precision number. The tradeoff is a reduced precision, as the trailing significand field is reduced from 10 to 7 bits. This format is mainly used in the training of machine learning models, where range is more valuable than precision. Many machine learning accelerators provide hardware support for this format.
- The TensorFloat-32
^{ [30] }format provides the best of the Bfloat16 and half-precision formats, having 8 bits of exponent as the former and 10 bits of trailing significand field as the latter. This format was introduced by Nvidia, which provides hardware support for it in the Tensor Cores of its GPUs based on the Nvidia Ampere architecture. The drawback of this format is its total size of 19 bits, which is not a power of 2. However, according to Nvidia, this format should only be used internally by hardware to speed up computations, while inputs and outputs should be stored in the 32-bit single-precision IEEE 754 format.^{ [30] }

Type | Sign | Exponent | Trailing significand field | Total bits |
---|---|---|---|---|

Half-precision | 1 | 5 | 10 | 16 |

Bfloat16 | 1 | 8 | 7 | 16 |

TensorFloat-32 | 1 | 8 | 10 | 19 |

Single-precision | 1 | 8 | 23 | 32 |

By their nature, all numbers expressed in floating-point format are rational numbers with a terminating expansion in the relevant base (for example, a terminating decimal expansion in base-10, or a terminating binary expansion in base-2). Irrational numbers, such as π or √2, or non-terminating rational numbers, must be approximated. The number of digits (or bits) of precision also limits the set of rational numbers that can be represented exactly. For example, the decimal number 123456789 cannot be exactly represented if only eight decimal digits of precision are available (would be rounded to 123456790 or 123456780 where the rightmost digit 0 is not explicitly represented), the same applies to non-terminating digits (.5 to be rounded to either .55555555 or .55555556).

When a number is represented in some format (such as a character string) which is not a native floating-point representation supported in a computer implementation, then it will require a conversion before it can be used in that implementation. If the number can be represented exactly in the floating-point format then the conversion is exact. If there is not an exact representation then the conversion requires a choice of which floating-point number to use to represent the original value. The representation chosen will have a different value from the original, and the value thus adjusted is called the *rounded value*.

Whether or not a rational number has a terminating expansion depends on the base. For example, in base-10 the number 1/2 has a terminating expansion (0.5) while the number 1/3 does not (0.333...). In base-2 only rationals with denominators that are powers of 2 (such as 1/2 or 3/16) are terminating. Any rational with a denominator that has a prime factor other than 2 will have an infinite binary expansion. This means that numbers which appear to be short and exact when written in decimal format may need to be approximated when converted to binary floating-point. For example, the decimal number 0.1 is not representable in binary floating-point of any finite precision; the exact binary representation would have a "1100" sequence continuing endlessly:

*e*= −4;*s*= 1100110011001100110011001100110011...,

where, as previously, *s* is the significand and *e* is the exponent.

When rounded to 24 bits this becomes

*e*= −4;*s*= 110011001100110011001101,

which is actually 0.100000001490116119384765625 in decimal.

As a further example, the real number π, represented in binary as an infinite sequence of bits is

- 11.0010010000111111011010101000100010000101101000110000100011010011...

but is

- 11.0010010000111111011011

when approximated by rounding to a precision of 24 bits.

In binary single-precision floating-point, this is represented as *s* = 1.10010010000111111011011 with *e* = 1. This has a decimal value of

**3.141592**7410125732421875,

whereas a more accurate approximation of the true value of π is

**3.14159265358979323846264338327950**...

The result of rounding differs from the true value by about 0.03 parts per million, and matches the decimal representation of π in the first 7 digits. The difference is the discretization error and is limited by the machine epsilon.

The arithmetical difference between two consecutive representable floating-point numbers which have the same exponent is called a unit in the last place (ULP). For example, if there is no representable number lying between the representable numbers 1.45a70c22_{hex} and 1.45a70c24_{hex}, the ULP is 2×16^{−8}, or 2^{−31}. For numbers with a base-2 exponent part of 0, i.e. numbers with an absolute value higher than or equal to 1 but lower than 2, an ULP is exactly 2^{−23} or about 10^{−7} in single precision, and exactly 2^{−53} or about 10^{−16} in double precision. The mandated behavior of IEEE-compliant hardware is that the result be within one-half of a ULP.

Rounding is used when the exact result of a floating-point operation (or a conversion to floating-point format) would need more digits than there are digits in the significand. IEEE 754 requires *correct rounding*: that is, the rounded result is as if infinitely precise arithmetic was used to compute the value and then rounded (although in implementation only three extra bits are needed to ensure this). There are several different rounding schemes (or *rounding modes*). Historically, truncation was the typical approach. Since the introduction of IEEE 754, the default method (* round to nearest, ties to even *, sometimes called Banker's Rounding) is more commonly used. This method rounds the ideal (infinitely precise) result of an arithmetic operation to the nearest representable value, and gives that representation as the result.^{ [nb 8] } In the case of a tie, the value that would make the significand end in an even digit is chosen. The IEEE 754 standard requires the same rounding to be applied to all fundamental algebraic operations, including square root and conversions, when there is a numeric (non-NaN) result. It means that the results of IEEE 754 operations are completely determined in all bits of the result, except for the representation of NaNs. ("Library" functions such as cosine and log are not mandated.)

Alternative rounding options are also available. IEEE 754 specifies the following rounding modes:

- round to nearest, where ties round to the nearest even digit in the required position (the default and by far the most common mode)
- round to nearest, where ties round away from zero (optional for binary floating-point and commonly used in decimal)
- round up (toward +∞; negative results thus round toward zero)
- round down (toward −∞; negative results thus round away from zero)
- round toward zero (truncation; it is similar to the common behavior of float-to-integer conversions, which convert −3.9 to −3 and 3.9 to 3)

Alternative modes are useful when the amount of error being introduced must be bounded. Applications that require a bounded error are multi-precision floating-point, and interval arithmetic. The alternative rounding modes are also useful in diagnosing numerical instability: if the results of a subroutine vary substantially between rounding to + and − infinity then it is likely numerically unstable and affected by round-off error.^{ [31] }

Converting a double-precision binary floating-point number to a decimal string is a common operation, but an algorithm producing results that are both accurate and minimal did not appear in print until 1990, with Steele and White's Dragon4. Some of the improvements since then include:

- David M. Gay's
*dtoa.c*, a practical open-source implementation of many ideas in Dragon4.^{ [32] } - Grisu3, with a 4× speedup as it removes the use of bignums. Must be used with a fallback, as it fails for ~0.5% of cases.
^{ [33] } - Errol3, an always-succeeding algorithm similar to, but slower than, Grisu3. Apparently not as good as an early-terminating Grisu with fallback.
^{ [34] } - Ryū, an always-succeeding algorithm that is faster and simpler than Grisu3.
^{ [35] }

Many modern language runtimes use Grisu3 with a Dragon4 fallback.^{ [36] }

The problem of parsing a decimal string into a binary FP representation is complex, with an accurate parser not appearing until Clinger's 1990 work (implemented in dtoa.c).^{ [32] } Further work has likewise progressed in the direction of faster parsing.^{ [37] }

For ease of presentation and understanding, decimal radix with 7 digit precision will be used in the examples, as in the IEEE 754 *decimal32* format. The fundamental principles are the same in any radix or precision, except that normalization is optional (it does not affect the numerical value of the result). Here, *s* denotes the significand and *e* denotes the exponent.

A simple method to add floating-point numbers is to first represent them with the same exponent. In the example below, the second number is shifted right by three digits, and one then proceeds with the usual addition method:

123456.7 = 1.234567 × 10^5 101.7654 = 1.017654 × 10^2 = 0.001017654 × 10^5

Hence: 123456.7 + 101.7654 = (1.234567 × 10^5) + (1.017654 × 10^2) = (1.234567 × 10^5) + (0.001017654 × 10^5) = (1.234567 + 0.001017654) × 10^5 = 1.235584654 × 10^5

In detail:

e=5; s=1.234567 (123456.7) + e=2; s=1.017654 (101.7654)

e=5; s=1.234567 + e=5; s=0.001017654 (after shifting) -------------------- e=5; s=1.235584654 (true sum: 123558.4654)

This is the true result, the exact sum of the operands. It will be rounded to seven digits and then normalized if necessary. The final result is

e=5; s=1.235585 (final sum: 123558.5)

The lowest three digits of the second operand (654) are essentially lost. This is round-off error. In extreme cases, the sum of two non-zero numbers may be equal to one of them:

e=5; s=1.234567 + e=−3; s=9.876543

e=5; s=1.234567 + e=5; s=0.00000009876543 (after shifting) ---------------------- e=5; s=1.23456709876543 (true sum) e=5; s=1.234567 (after rounding and normalization)

In the above conceptual examples it would appear that a large number of extra digits would need to be provided by the adder to ensure correct rounding; however, for binary addition or subtraction using careful implementation techniques only a *guard* bit, a *rounding* bit and one extra *sticky* bit need to be carried beyond the precision of the operands.^{ [22] }^{ [38] }^{:218–220}

Another problem of loss of significance occurs when *approximations* to two nearly equal numbers are subtracted. In the following example *e* = 5; *s* = 1.234571 and *e* = 5; *s* = 1.234567 are approximations to the rationals 123457.1467 and 123456.659.

e=5; s=1.234571 − e=5; s=1.234567 ---------------- e=5; s=0.000004 e=−1; s=4.000000 (after rounding and normalization)

The floating-point difference is computed exactly because the numbers are close—the Sterbenz lemma guarantees this, even in case of underflow when gradual underflow is supported. Despite this, the difference of the original numbers is *e* = −1; *s* = 4.877000, which differs more than 20% from the difference *e* = −1; *s* = 4.000000 of the approximations. In extreme cases, all significant digits of precision can be lost.^{ [22] }^{ [39] } This * cancellation * illustrates the danger in assuming that all of the digits of a computed result are meaningful. Dealing with the consequences of these errors is a topic in numerical analysis; see also Accuracy problems.

To multiply, the significands are multiplied while the exponents are added, and the result is rounded and normalized.

e=3; s=4.734612 × e=5; s=5.417242 ----------------------- e=8; s=25.648538980104 (true product) e=8; s=25.64854 (after rounding) e=9; s=2.564854 (after normalization)

Similarly, division is accomplished by subtracting the divisor's exponent from the dividend's exponent, and dividing the dividend's significand by the divisor's significand.

There are no cancellation or absorption problems with multiplication or division, though small errors may accumulate as operations are performed in succession.^{ [22] } In practice, the way these operations are carried out in digital logic can be quite complex (see Booth's multiplication algorithm and Division algorithm).^{ [nb 9] } For a fast, simple method, see the Horner method.

Floating-point computation in a computer can run into three kinds of problems:

- An operation can be mathematically undefined, such as ∞/∞, or division by zero.
- An operation can be legal in principle, but not supported by the specific format, for example, calculating the square root of −1 or the inverse sine of 2 (both of which result in complex numbers).
- An operation can be legal in principle, but the result can be impossible to represent in the specified format, because the exponent is too large or too small to encode in the exponent field. Such an event is called an overflow (exponent too large), underflow (exponent too small) or denormalization (precision loss).

Prior to the IEEE standard, such conditions usually caused the program to terminate, or triggered some kind of trap that the programmer might be able to catch. How this worked was system-dependent, meaning that floating-point programs were not portable. (The term "exception" as used in IEEE 754 is a general term meaning an exceptional condition, which is not necessarily an error, and is a different usage to that typically defined in programming languages such as a C++ or Java, in which an "exception" is an alternative flow of control, closer to what is termed a "trap" in IEEE 754 terminology.)

Here, the required default method of handling exceptions according to IEEE 754 is discussed (the IEEE 754 optional trapping and other "alternate exception handling" modes are not discussed). Arithmetic exceptions are (by default) required to be recorded in "sticky" status flag bits. That they are "sticky" means that they are not reset by the next (arithmetic) operation, but stay set until explicitly reset. The use of "sticky" flags thus allows for testing of exceptional conditions to be delayed until after a full floating-point expression or subroutine: without them exceptional conditions that could not be otherwise ignored would require explicit testing immediately after every floating-point operation. By default, an operation always returns a result according to specification without interrupting computation. For instance, 1/0 returns +∞, while also setting the divide-by-zero flag bit (this default of ∞ is designed to often return a finite result when used in subsequent operations and so be safely ignored).

The original IEEE 754 standard, however, failed to recommend operations to handle such sets of arithmetic exception flag bits. So while these were implemented in hardware, initially programming language implementations typically did not provide a means to access them (apart from assembler). Over time some programming language standards (e.g., C99/C11 and Fortran) have been updated to specify methods to access and change status flag bits. The 2008 version of the IEEE 754 standard now specifies a few operations for accessing and handling the arithmetic flag bits. The programming model is based on a single thread of execution and use of them by multiple threads has to be handled by a means outside of the standard (e.g. C11 specifies that the flags have thread-local storage).

IEEE 754 specifies five arithmetic exceptions that are to be recorded in the status flags ("sticky bits"):

**inexact**, set if the rounded (and returned) value is different from the mathematically exact result of the operation.**underflow**, set if the rounded value is tiny (as specified in IEEE 754)*and*inexact (or maybe limited to if it has denormalization loss, as per the 1984 version of IEEE 754), returning a subnormal value including the zeros.**overflow**, set if the absolute value of the rounded value is too large to be represented. An infinity or maximal finite value is returned, depending on which rounding is used.**divide-by-zero**, set if the result is infinite given finite operands, returning an infinity, either +∞ or −∞.**invalid**, set if a real-valued result cannot be returned e.g. sqrt(−1) or 0/0, returning a quiet NaN.

The default return value for each of the exceptions is designed to give the correct result in the majority of cases such that the exceptions can be ignored in the majority of codes. *inexact* returns a correctly rounded result, and *underflow* returns a denormalized small value and so can almost always be ignored.^{ [40] }*divide-by-zero* returns infinity exactly, which will typically then divide a finite number and so give zero, or else will give an *invalid* exception subsequently if not, and so can also typically be ignored. For example, the effective resistance of n resistors in parallel (see fig. 1) is given by . If a short-circuit develops with set to 0, will return +infinity which will give a final of 0, as expected^{ [41] } (see the continued fraction example of IEEE 754 design rationale for another example).

*Overflow* and *invalid* exceptions can typically not be ignored, but do not necessarily represent errors: for example, a root-finding routine, as part of its normal operation, may evaluate a passed-in function at values outside of its domain, returning NaN and an *invalid* exception flag to be ignored until finding a useful start point.^{ [40] }

The fact that floating-point numbers cannot precisely represent all real numbers, and that floating-point operations cannot precisely represent true arithmetic operations, leads to many surprising situations. This is related to the finite precision with which computers generally represent numbers.

For example, the non-representability of 0.1 and 0.01 (in binary) means that the result of attempting to square 0.1 is neither 0.01 nor the representable number closest to it. In 24-bit (single precision) representation, 0.1 (decimal) was given previously as *e* = −4; *s* = 110011001100110011001101, which is

- 0.100000001490116119384765625 exactly.

Squaring this number gives

- 0.010000000298023226097399174250313080847263336181640625 exactly.

Squaring it with single-precision floating-point hardware (with rounding) gives

- 0.010000000707805156707763671875 exactly.

But the representable number closest to 0.01 is

- 0.009999999776482582092285156250 exactly.

Also, the non-representability of π (and π/2) means that an attempted computation of tan(π/2) will not yield a result of infinity, nor will it even overflow in the usual floating-point formats (assuming an accurate implementation of tan). It is simply not possible for standard floating-point hardware to attempt to compute tan(π/2), because π/2 cannot be represented exactly. This computation in C:

`/* Enough digits to be sure we get the correct approximation. */doublepi=3.1415926535897932384626433832795;doublez=tan(pi/2.0);`

will give a result of 16331239353195370.0. In single precision (using the tanf function), the result will be −22877332.0.

By the same token, an attempted computation of sin(π) will not yield zero. The result will be (approximately) 0.1225×10^{−15} in double precision, or −0.8742×10^{−7} in single precision.^{ [nb 10] }

While floating-point addition and multiplication are both commutative (*a* + *b* = *b* + *a* and *a* × *b* = *b* × *a*), they are not necessarily associative. That is, (*a* + *b*) + *c* is not necessarily equal to *a* + (*b* + *c*). Using 7-digit significand decimal arithmetic:

a = 1234.567, b = 45.67834, c = 0.0004

(a + b) + c: 1234.567 (a) + 45.67834 (b) ____________ 1280.24534 rounds to 1280.245

1280.245 (a + b) + 0.0004 (c) ____________ 1280.2454 rounds to1280.245← (a + b) + c

a + (b + c): 45.67834 (b) + 0.0004 (c) ____________ 45.67874

1234.567 (a) + 45.67874 (b + c) ____________ 1280.24574 rounds to1280.246← a + (b + c)

They are also not necessarily distributive. That is, (*a* + *b*) × *c* may not be the same as *a* × *c* + *b* × *c*:

1234.567 × 3.333333 = 4115.223 1.234567 × 3.333333 = 4.115223 4115.223 + 4.115223 = 4119.338 but 1234.567 + 1.234567 = 1235.802 1235.802 × 3.333333 = 4119.340

In addition to loss of significance, inability to represent numbers such as π and 0.1 exactly, and other slight inaccuracies, the following phenomena may occur:

- Cancellation: subtraction of nearly equal operands may cause extreme loss of accuracy.
^{ [42] }^{ [39] }When we subtract two almost equal numbers we set the most significant digits to zero, leaving ourselves with just the insignificant, and most erroneous, digits.^{ [4] }^{:124}For example, when determining a derivative of a function the following formula is used:

- Intuitively one would want an
*h*very close to zero, however when using floating-point operations, the smallest number won't give the best approximation of a derivative. As*h*grows smaller the difference between f (a + h) and f(a) grows smaller, cancelling out the most significant and least erroneous digits and making the most erroneous digits more important. As a result the smallest number of*h*possible will give a more erroneous approximation of a derivative than a somewhat larger number. This is perhaps the most common and serious accuracy problem.

- Conversions to integer are not intuitive: converting (63.0/9.0) to integer yields 7, but converting (0.63/0.09) may yield 6. This is because conversions generally truncate rather than round. Floor and ceiling functions may produce answers which are off by one from the intuitively expected value.
- Limited exponent range: results might overflow yielding infinity, or underflow yielding a subnormal number or zero. In these cases precision will be lost.
- Testing for safe division is problematic: Checking that the divisor is not zero does not guarantee that a division will not overflow.
- Testing for equality is problematic. Two computational sequences that are mathematically equal may well produce different floating-point values.
^{ [43] }

- On 25 February 1991, a loss of significance in a MIM-104 Patriot missile battery prevented it from intercepting an incoming Scud missile in Dhahran, Saudi Arabia, contributing to the death of 28 soldiers from the U.S. Army's 14th Quartermaster Detachment.
^{ [44] }

*Machine precision* is a quantity that characterizes the accuracy of a floating-point system, and is used in backward error analysis of floating-point algorithms. It is also known as unit roundoff or * machine epsilon *. Usually denoted Ε_{mach}, its value depends on the particular rounding being used.

With rounding to zero,

whereas rounding to nearest,

This is important since it bounds the * relative error * in representing any non-zero real number x within the normalized range of a floating-point system:

Backward error analysis, the theory of which was developed and popularized by James H. Wilkinson, can be used to establish that an algorithm implementing a numerical function is numerically stable.^{ [45] } The basic approach is to show that although the calculated result, due to roundoff errors, will not be exactly correct, it is the exact solution to a nearby problem with slightly perturbed input data. If the perturbation required is small, on the order of the uncertainty in the input data, then the results are in some sense as accurate as the data "deserves". The algorithm is then defined as * backward stable *. Stability is a measure of the sensitivity to rounding errors of a given numerical procedure; by contrast, the condition number of a function for a given problem indicates the inherent sensitivity of the function to small perturbations in its input and is independent of the implementation used to solve the problem.^{ [46] }

As a trivial example, consider a simple expression giving the inner product of (length two) vectors and , then

and so

where

where

by definition, which is the sum of two slightly perturbed (on the order of Ε_{mach}) input data, and so is backward stable. For more realistic examples in numerical linear algebra, see Higham 2002^{ [47] } and other references below.

Although, as noted previously, individual arithmetic operations of IEEE 754 are guaranteed accurate to within half a ULP, more complicated formulae can suffer from larger errors due to round-off. The loss of accuracy can be substantial if a problem or its data are ill-conditioned, meaning that the correct result is hypersensitive to tiny perturbations in its data. However, even functions that are well-conditioned can suffer from large loss of accuracy if an algorithm numerically unstable for that data is used: apparently equivalent formulations of expressions in a programming language can differ markedly in their numerical stability. One approach to remove the risk of such loss of accuracy is the design and analysis of numerically stable algorithms, which is an aim of the branch of mathematics known as numerical analysis. Another approach that can protect against the risk of numerical instabilities is the computation of intermediate (scratch) values in an algorithm at a higher precision than the final result requires,^{ [48] } which can remove, or reduce by orders of magnitude,^{ [49] } such risk: IEEE 754 quadruple precision and extended precision are designed for this purpose when computing at double precision.^{ [50] }^{ [nb 11] }

For example, the following algorithm is a direct implementation to compute the function A(x) = (x−1) / (exp(x−1) − 1) which is well-conditioned at 1.0,^{ [nb 12] } however it can be shown to be numerically unstable and lose up to half the significant digits carried by the arithmetic when computed near 1.0.^{ [23] }

`doubleA(doubleX){doubleY,Z;// [1]Y=X-1.0;Z=exp(Y);if(Z!=1.0)Z=Y/(Z-1.0);// [2]return(Z);}`

If, however, intermediate computations are all performed in extended precision (e.g. by setting line [1] to C99 long double), then up to full precision in the final double result can be maintained.^{ [nb 13] } Alternatively, a numerical analysis of the algorithm reveals that if the following non-obvious change to line [2] is made:

`if(Z!=1.0)Z=log(Z)/(Z-1.0);`

then the algorithm becomes numerically stable and can compute to full double precision.

To maintain the properties of such carefully constructed numerically stable programs, careful handling by the compiler is required. Certain "optimizations" that compilers might make (for example, reordering operations) can work against the goals of well-behaved software. There is some controversy about the failings of compilers and language designs in this area: C99 is an example of a language where such optimizations are carefully specified to maintain numerical precision. See the external references at the bottom of this article.

A detailed treatment of the techniques for writing high-quality floating-point software is beyond the scope of this article, and the reader is referred to,^{ [47] }^{ [51] } and the other references at the bottom of this article. Kahan suggests several rules of thumb that can substantially decrease by orders of magnitude^{ [51] } the risk of numerical anomalies, in addition to, or in lieu of, a more careful numerical analysis. These include: as noted above, computing all expressions and intermediate results in the highest precision supported in hardware (a common rule of thumb is to carry twice the precision of the desired result, i.e. compute in double precision for a final single-precision result, or in double extended or quad precision for up to double-precision results^{ [24] }); and rounding input data and results to only the precision required and supported by the input data (carrying excess precision in the final result beyond that required and supported by the input data can be misleading, increases storage cost and decreases speed, and the excess bits can affect convergence of numerical procedures:^{ [52] } notably, the first form of the iterative example given below converges correctly when using this rule of thumb). Brief descriptions of several additional issues and techniques follow.

As decimal fractions can often not be exactly represented in binary floating-point, such arithmetic is at its best when it is simply being used to measure real-world quantities over a wide range of scales (such as the orbital period of a moon around Saturn or the mass of a proton), and at its worst when it is expected to model the interactions of quantities expressed as decimal strings that are expected to be exact.^{ [49] }^{ [51] } An example of the latter case is financial calculations. For this reason, financial software tends not to use a binary floating-point number representation.^{ [53] } The "decimal" data type of the C# and Python programming languages, and the decimal formats of the IEEE 754-2008 standard, are designed to avoid the problems of binary floating-point representations when applied to human-entered exact decimal values, and make the arithmetic always behave as expected when numbers are printed in decimal.

Expectations from mathematics may not be realized in the field of floating-point computation. For example, it is known that , and that , however these facts cannot be relied on when the quantities involved are the result of floating-point computation.

The use of the equality test (`if (x==y) ...`

) requires care when dealing with floating-point numbers. Even simple expressions like `0.6/0.2-3==0`

will, on most computers, fail to be true^{ [54] } (in IEEE 754 double precision, for example, `0.6/0.2-3`

is approximately equal to -4.44089209850063e-16). Consequently, such tests are sometimes replaced with "fuzzy" comparisons (`if (abs(x-y) < epsilon) ...`

, where epsilon is sufficiently small and tailored to the application, such as 1.0E−13). The wisdom of doing this varies greatly, and can require numerical analysis to bound epsilon.^{ [47] } Values derived from the primary data representation and their comparisons should be performed in a wider, extended, precision to minimize the risk of such inconsistencies due to round-off errors.^{ [51] } It is often better to organize the code in such a way that such tests are unnecessary. For example, in computational geometry, exact tests of whether a point lies off or on a line or plane defined by other points can be performed using adaptive precision or exact arithmetic methods.^{ [55] }

Small errors in floating-point arithmetic can grow when mathematical algorithms perform operations an enormous number of times. A few examples are matrix inversion, eigenvector computation, and differential equation solving. These algorithms must be very carefully designed, using numerical approaches such as Iterative refinement, if they are to work well.^{ [56] }

Summation of a vector of floating-point values is a basic algorithm in scientific computing, and so an awareness of when loss of significance can occur is essential. For example, if one is adding a very large number of numbers, the individual addends are very small compared with the sum. This can lead to loss of significance. A typical addition would then be something like

3253.671 + 3.141276 ----------- 3256.812

The low 3 digits of the addends are effectively lost. Suppose, for example, that one needs to add many numbers, all approximately equal to 3. After 1000 of them have been added, the running sum is about 3000; the lost digits are not regained. The Kahan summation algorithm may be used to reduce the errors.^{ [47] }

Round-off error can affect the convergence and accuracy of iterative numerical procedures. As an example, Archimedes approximated π by calculating the perimeters of polygons inscribing and circumscribing a circle, starting with hexagons, and successively doubling the number of sides. As noted above, computations may be rearranged in a way that is mathematically equivalent but less prone to error (numerical analysis). Two forms of the recurrence formula for the circumscribed polygon are^{[ citation needed ]}:

- First form:
- second form:

- , converging as

Here is a computation using IEEE "double" (a significand with 53 bits of precision) arithmetic:

i 6 × 2^{i}× t_{i}, first form 6 × 2^{i}× t_{i}, second form --------------------------------------------------------- 03.46410161513775438633.4641016151377543863 13.21539030917347101733.2153903091734723496 23.15965994209749401203.1596599420975006733 33.14608621513140129793.1460862151314352708 43.14271459964531363343.1427145996453689225 53.14187304998012595363.1418730499798241950 63.14166274705480841333.1416627470568494473 73.14161017659978059053.1416101766046906629 83.14159703432307768623.1415970343215275928 93.14159374881711506153.1415937487713536668 103.14159292787337407483.1415929273850979885 113.14159272562285041273.1415927220386148377 123.14159267174128586933.1415926707019992125 133.14159261890114560603.1415926578678454728 143.14159267174128586933.1415926546593073709 153.14159193588223217833.1415926538571730119 163.14159267174128586933.1415926536566394222 173.14158100757962333023.1415926536065061913 183.14159267174128586933.1415926535939728836 193.14140615473788109563.1415926535908393901 203.14054349240084063053.1415926535900560168 213.14000686469122736173.1415926535898608396 223.13494537565859299193.1415926535898122118 233.14000686469122736173.1415926535897995552 243.22451524353455254433.1415926535897968907 253.1415926535897962246 263.1415926535897962246 273.1415926535897962246 283.1415926535897962246 The true value is3.14159265358979323846264338327...

While the two forms of the recurrence formula are clearly mathematically equivalent,^{ [nb 14] } the first subtracts 1 from a number extremely close to 1, leading to an increasingly problematic loss of significant digits. As the recurrence is applied repeatedly, the accuracy improves at first, but then it deteriorates. It never gets better than about 8 digits, even though 53-bit arithmetic should be capable of about 16 digits of precision. When the second form of the recurrence is used, the value converges to 15 digits of precision.

- C99 for code examples demonstrating access and use of IEEE 754 features.
- Computable number
- Coprocessor
- Decimal floating point
- Double precision
- Experimental mathematics—utilizes high precision floating-point computations
- Fixed-point arithmetic
- Floating point error mitigation
- FLOPS
- Gal's accurate tables
- GNU Multi-Precision Library
- Half precision
- IEEE 754 — Standard for Binary Floating-Point Arithmetic
- IBM Floating Point Architecture
- Kahan summation algorithm
- Microsoft Binary Format (MBF)
- Minifloat
- Q (number format) for constant resolution
- Quad precision
- Significant digits
- Single precision
- 0.999... - every nonzero terminating decimal has two equal representations

- ↑ The
*significand*of a floating-point number is also called*mantissa*by some authors—not to be confused with the mantissa of a logarithm. Somewhat vague, terms such as*coefficient*or*argument*are also used by some. The usage of the term*fraction*by some authors is potentially misleading as well. The term*characteristic*(as used f.e. by CDC) is ambiguous, as it was historically also used to specify some form of exponent of floating-point numbers. - ↑ The
*exponent*of a floating-point number is sometimes also referred to as*scale*. The term*characteristic*(for*biased exponent*,*exponent bias*, or*excess n representation*) is ambiguous, as it was historically also used to specify the significand of floating-point numbers. - ↑ Hexadecimal (base-16) floating-point arithmetic is used in the IBM System 360 (1964) and 370 (1970) as well as various newer IBM machines, in the Manchester MU5 (1972) and in the HEP (1982) computers. It is also used in the Illinois ILLIAC III (1966), Data General Eclipse S/200 (ca. 1974), Gould Powernode 9080 (1980s), Interdata 8/32 (1970s), the SEL Systems 85 and 86 as well as the SDS Sigma 5 (1967), 7 (1966) and Xerox Sigma 9 (1970).
- ↑ Octal (base-8) floating-point arithmetic is used in the Ferranti Atlas (1962), Burroughs B5500 (1964), Burroughs B5700 (1971), Burroughs B6700 (1971) and Burroughs B7700 (1972) computers.
- ↑ Quaternary (base-4) floating-point arithmetic is used in the Illinois ILLIAC II (1962) computer. It is also used in the Digital Field System DFS IV and V high-resolution site survey systems.
- ↑ Base-256 floating-point arithmetic is used in the Rice Institute R1 computer (since 1958).
- ↑ Base-65536 floating-point arithmetic is used in the MANIAC II (1956) computer.
- ↑ Computer hardware doesn't necessarily compute the exact value; it simply has to produce the equivalent rounded result as though it had computed the infinitely precise result.
- ↑ The enormous complexity of modern division algorithms once led to a famous error. An early version of the Intel Pentium chip was shipped with a division instruction that, on rare occasions, gave slightly incorrect results. Many computers had been shipped before the error was discovered. Until the defective computers were replaced, patched versions of compilers were developed that could avoid the failing cases. See
*Pentium FDIV bug*. - ↑ But an attempted computation of cos(π) yields −1 exactly. Since the derivative is nearly zero near π, the effect of the inaccuracy in the argument is far smaller than the spacing of the floating-point numbers around −1, and the rounded result is exact.
- ↑ William Kahan notes: "Except in extremely uncommon situations, extra-precise arithmetic generally attenuates risks due to roundoff at far less cost than the price of a competent error-analyst."
- ↑ The Taylor expansion of this function demonstrates that it is well-conditioned near 1: A(x) = 1 − (x−1)/2 + (x−1)^2/12 − (x−1)^4/720 + (x−1)^6/30240 − (x−1)^8/1209600 + ... for |x−1| < π.
- ↑ If long double is IEEE quad precision then full double precision is retained; if long double is IEEE double extended precision then additional, but not full precision is retained.
- ↑ The equivalence of the two forms can be verified algebraically by noting that the denominator of the fraction in the second form is the conjugate of the numerator of the first. By multiplying the top and bottom of the first expression by this conjugate, one obtains the second expression.

**IEEE 754-1985** was an industry standard for representing floating-point numbers in computers, officially adopted in 1985 and superseded in 2008 by IEEE 754-2008, and then again in 2019 by minor revision IEEE 754-2019. During its 23 years, it was the most widely used format for floating-point computation. It was implemented in software, in the form of floating-point libraries, and in hardware, in the instructions of many CPUs and FPUs. The first integrated circuit to implement the draft of what was to become IEEE 754-1985 was the Intel 8087.

A **computer number format** is the internal representation of numeric values in digital device hardware and software, such as in programmable computers and calculators. Numerical values are stored as groupings of bits, such as bytes and words. The encoding between numerical values and bit patterns is chosen for convenience of the operation of the computer; the encoding used by the computer's instruction set generally requires conversion for external use, such as for printing and display. Different types of processors may have different internal representations of numerical values and different conventions are used for integer and real numbers. Most calculations are carried out with number formats that fit into a processor register, but some software systems allow representation of arbitrarily large numbers using multiple words of memory.

**Double-precision floating-point format** is a computer number format, usually occupying 64 bits in computer memory; it represents a wide dynamic range of numeric values by using a floating radix point.

The **IEEE Standard for Floating-Point Arithmetic** is a technical standard for floating-point arithmetic established in 1985 by the Institute of Electrical and Electronics Engineers (IEEE). The standard addressed many problems found in the diverse floating-point implementations that made them difficult to use reliably and portably. Many hardware floating-point units use the IEEE 754 standard.

The **significand** is part of a number in scientific notation or a floating-point number, consisting of its significant digits. Depending on the interpretation of the exponent, the significand may represent an integer or a fraction.

**Hexadecimal floating point** is a format for encoding floating-point numbers first introduced on the IBM System/360 computers, and supported on subsequent machines based on that architecture, as well as machines which were intended to be application-compatible with System/360.

**Machine epsilon** gives an upper bound on the relative error due to rounding in floating point arithmetic. This value characterizes computer arithmetic in the field of numerical analysis, and by extension in the subject of computational science. The quantity is also called **macheps** or **unit roundoff**, and it has the symbols Greek epsilon or bold Roman **u**, respectively.

In computing, **minifloats** are floating-point values represented with very few bits. Predictably, they are not well suited for general-purpose numerical calculations. They are used for special purposes, most often in computer graphics, where iterations are small and precision has aesthetic effects. Machine learning also uses similar formats like bfloat16. Additionally, they are frequently encountered as a pedagogical tool in computer-science courses to demonstrate the properties and structures of floating-point arithmetic and IEEE 754 numbers.

**Extended precision** refers to floating-point number formats that provide greater precision than the basic floating-point formats. Extended precision formats support a basic format by minimizing roundoff and overflow errors in intermediate values of expressions on the base format. In contrast to *extended precision*, arbitrary-precision arithmetic refers to implementations of much larger numeric types using special software.

**Decimal floating-point** (**DFP**) arithmetic refers to both a representation and operations on decimal floating-point numbers. Working directly with decimal (base-10) fractions can avoid the rounding errors that otherwise typically occur when converting between decimal fractions and binary (base-2) fractions.

The IEEE 754-2008 standard includes decimal floating-point number formats in which the significand and the exponent can be encoded in two ways, referred to as **binary encoding** and *decimal encoding*.

**IEEE 754-2008** was published in August 2008 and is a significant revision to, and replaces, the IEEE 754-1985 floating-point standard, while in 2019 it was updated with a minor revision IEEE 754-2019. The 2008 revision extended the previous standard where it was necessary, added decimal arithmetic and formats, tightened up certain areas of the original standard which were left undefined, and merged in IEEE 854.

In computing, **half precision** is a binary floating-point computer number format that occupies 16 bits in computer memory.

In computing, **quadruple precision** is a binary floating point–based computer number format that occupies 16 bytes with precision at least twice the 53-bit double precision.

**Single-precision floating-point format** is a computer number format, usually occupying 32 bits in computer memory; it represents a wide dynamic range of numeric values by using a floating radix point.

In computing, **decimal32** is a decimal floating-point computer numbering format that occupies 4 bytes (32 bits) in computer memory. It is intended for applications where it is necessary to emulate decimal rounding exactly, such as financial and tax computations. Like the binary16 format, it is intended for memory saving storage.

In computing, **decimal64** is a decimal floating-point computer numbering format that occupies 8 bytes in computer memory. It is intended for applications where it is necessary to emulate decimal rounding exactly, such as financial and tax computations.

In computing, **decimal128** is a decimal floating-point computer numbering format that occupies 16 bytes (128 bits) in computer memory. It is intended for applications where it is necessary to emulate decimal rounding exactly, such as financial and tax computations.

In computing, **octuple precision** is a binary floating-point-based computer number format that occupies 32 bytes in computer memory. This 256-bit octuple precision is for applications requiring results in higher than quadruple precision. This format is rarely used and very few environments support it.

The **bfloat16** floating-point format is a computer number format occupying 16 bits in computer memory; it represents a wide dynamic range of numeric values by using a floating radix point. This format is a truncated (16-bit) version of the 32-bit IEEE 754 single-precision floating-point format (binary32) with the intent of accelerating machine learning and near-sensor computing. It preserves the approximate dynamic range of 32-bit floating-point numbers by retaining 8 exponent bits, but supports only an 8-bit precision rather than the 24-bit significand of the binary32 format. More so than single-precision 32-bit floating-point numbers, bfloat16 numbers are unsuitable for integer calculations, but this is not their intended use. Bfloat16 is used to reduce the storage requirements and increase the calculation speed of machine learning algorithms.

- ↑ W. Smith, Steven (1997). "Chapter 28, Fixed versus Floating Point".
*The Scientist and Engineer's Guide to Digital Signal Processing*. California Technical Pub. p. 514. ISBN 978-0-9660176-3-2 . Retrieved 2012-12-31. - 1 2 Zehendner, Eberhard (Summer 2008). "Rechnerarithmetik: Fest- und Gleitkommasysteme" (PDF) (Lecture script) (in German). Friedrich-Schiller-Universität Jena. p. 2. Archived (PDF) from the original on 2018-08-07. Retrieved 2018-08-07. (NB. This reference incorrectly gives the MANIAC II's floating point base as 256, whereas it actually is 65536.)
- 1 2 3 4 Beebe, Nelson H. F. (2017-08-22). "Chapter H. Historical floating-point architectures".
*The Mathematical-Function Computation Handbook - Programming Using the MathCW Portable Software Library*(1 ed.). Salt Lake City, UT, USA: Springer International Publishing AG. p. 948. doi:10.1007/978-3-319-64110-2. ISBN 978-3-319-64109-6. LCCN 2017947446. S2CID 30244721. - 1 2 3 4 5 Muller, Jean-Michel; Brisebarre, Nicolas; de Dinechin, Florent; Jeannerod, Claude-Pierre; Lefèvre, Vincent; Melquiond, Guillaume; Revol, Nathalie; Stehlé, Damien; Torres, Serge (2010).
*Handbook of Floating-Point Arithmetic*(1 ed.). Birkhäuser. doi:10.1007/978-0-8176-4705-6. ISBN 978-0-8176-4704-9. LCCN 2009939668. - ↑ Savard, John J. G. (2018) [2007], "The Decimal Floating-Point Standard",
*quadibloc*, archived from the original on 2018-07-03, retrieved 2018-07-16 - ↑ Parkinson, Roger (2000-12-07). "Chapter 2 - High resolution digital site survey systems - Chapter 2.1 - Digital field recording systems".
*High Resolution Site Surveys*(1 ed.). CRC Press. p. 24. ISBN 978-0-20318604-6 . Retrieved 2019-08-18.[…] Systems such as the [Digital Field System] DFS IV and DFS V were quaternary floating-point systems and used gain steps of 12 dB. […]

(256 pages) - ↑ Lazarus, Roger B. (1957-01-30) [1956-10-01]. "MANIAC II" (PDF). Los Alamos, NM, USA: Los Alamos Scientific Laboratory of the University of California. p. 14. LA-2083. Archived (PDF) from the original on 2018-08-07. Retrieved 2018-08-07.
[…] the Maniac's floating base, which is 2

^{16}= 65,536. […] The Maniac's large base permits a considerable increase in the speed of floating point arithmetic. Although such a large base implies the possibility of as many as 15 lead zeros, the large word size of 48 bits guarantees adequate significance. […] - ↑ Randell, Brian (1982). "From analytical engine to electronic digital computer: the contributions of Ludgate, Torres, and Bush".
*IEEE Annals of the History of Computing*.**4**(4): 327–341. doi:10.1109/mahc.1982.10042. S2CID 1737953. - ↑ Rojas, Raúl (1997). "Konrad Zuse's Legacy: The Architecture of the Z1 and Z3" (PDF).
*IEEE Annals of the History of Computing*.**19**(2): 5–15. doi:10.1109/85.586067. - ↑ Rojas, Raúl (2014-06-07). "The Z1: Architecture and Algorithms of Konrad Zuse's First Computer". arXiv: 1406.1886 [cs.AR].
- 1 2 Kahan, William Morton (1997-07-15). "The Baleful Effect of Computer Languages and Benchmarks upon Applied Mathematics, Physics and Chemistry. John von Neumann Lecture" (PDF). p. 3.
- ↑ Randell, Brian, ed. (1982) [1973].
*The Origins of Digital Computers: Selected Papers*(3 ed.). Berlin; New York: Springer-Verlag. p. 244. ISBN 978-3-540-11319-5. - 1 2 Severance, Charles (1998-02-20). "An Interview with the Old Man of Floating-Point".
- ↑
*ISO/IEC 9899:1999 - Programming languages - C*. Iso.org. §F.2, note 307."Extended" is IEC 60559's double-extended data format. Extended refers to both the common 80-bit and quadruple 128-bit IEC 60559 formats.

- ↑ Using the GNU Compiler Collection, i386 and x86-64 Options Archived 2015-01-16 at the Wayback Machine .
- ↑ "long double (GCC specific) and __float128".
*StackOverflow*. - ↑ "Procedure Call Standard for the ARM 64-bit Architecture (AArch64)" (PDF). 2013-05-22. Retrieved 2019-09-22.
- ↑ "ARM Compiler toolchain Compiler Reference, Version 5.03" (PDF). 2013. Section 6.3
*Basic data types*. Retrieved 2019-11-08. - ↑ Kahan, William Morton (2004-11-20). "On the Cost of Floating-Point Computation Without Extra-Precise Arithmetic" (PDF). Retrieved 2012-02-19.
- ↑ "openEXR". openEXR. Retrieved 2012-04-25.
- ↑ "IEEE-754 Analysis".
- 1 2 3 4 Goldberg, David (March 1991). "What Every Computer Scientist Should Know About Floating-Point Arithmetic" (PDF).
*ACM Computing Surveys*.**23**(1): 5–48. doi:10.1145/103162.103163. S2CID 222008826 . Retrieved 2016-01-20. (, , ) - 1 2 3 Kahan, William Morton; Darcy, Joseph (2001) [1998-03-01]. "How Java's floating-point hurts everyone everywhere" (PDF). Retrieved 2003-09-05.
- 1 2 Kahan, William Morton (1981-02-12). "Why do we need a floating-point arithmetic standard?" (PDF). p. 26.
- 1 2 Kahan, William Morton (1996-06-11). "The Baleful Effect of Computer Benchmarks upon Applied Mathematics, Physics and Chemistry" (PDF).
- ↑ Herf, Michael (December 2001). "radix tricks".
*stereopsis : graphics*. - 1 2 Borland staff (1998-07-02) [1994-03-10]. "Converting between Microsoft Binary and IEEE formats".
*Technical Information Database*(TI1431C.txt). Embarcadero USA / Inprise (originally: Borland). ID 1400. Archived from the original on 2019-02-20. Retrieved 2016-05-30.[…] _fmsbintoieee(float *src4, float *dest4) […] MS Binary Format […] byte order => m3 | m2 | m1 | exponent […] m1 is most significant byte => sbbb|bbbb […] m3 is the least significant byte […] m = mantissa byte […] s = sign bit […] b = bit […] MBF is bias 128 and IEEE is bias 127. […] MBF places the decimal point before the assumed bit, while IEEE places the decimal point after the assumed bit. […] ieee_exp = msbin[3] - 2; /* actually, msbin[3]-1-128+127 */ […] _dmsbintoieee(double *src8, double *dest8) […] MS Binary Format […] byte order => m7 | m6 | m5 | m4 | m3 | m2 | m1 | exponent […] m1 is most significant byte => smmm|mmmm […] m7 is the least significant byte […] MBF is bias 128 and IEEE is bias 1023. […] MBF places the decimal point before the assumed bit, while IEEE places the decimal point after the assumed bit. […] ieee_exp = msbin[7] - 128 - 1 + 1023; […]

- 1 2 Steil, Michael (2008-10-20). "Create your own Version of Microsoft BASIC for 6502". pagetable.com. Archived from the original on 2016-05-30. Retrieved 2016-05-30.
- ↑ "IEEE vs. Microsoft Binary Format; Rounding Issues (Complete)".
*Microsoft Support*. Microsoft. 2006-11-21. Article ID KB35826, Q35826. Archived from the original on 2020-08-28. Retrieved 2010-02-24. - 1 2 Kharya, Paresh (2020-05-14). "TensorFloat-32 in the A100 GPU Accelerates AI Training, HPC up to 20x" . Retrieved 2020-05-16.
- ↑ Kahan, William Morton (2006-01-11). "How Futile are Mindless Assessments of Roundoff in Floating-Point Computation?" (PDF).
- 1 2 Gay, David M (1990).
*Correctly Rounded Binary-Decimal and Decimal-Binary Conversions*(Technical report). NUMERICAL ANALYSIS MANUSCRIPT 90-10, AT&T BELL LABORATORIES. CiteSeerX 10.1.1.31.4049 . (dtoa.c in netlab) - ↑ Loitsch, Florian (2010). "Printing floating-point numbers quickly and accurately with integers" (PDF).
*Proceedings of the 2010 ACM SIGPLAN Conference on Programming Language Design and Implementation - PLDI '10*: 233. doi:10.1145/1806596.1806623. ISBN 9781450300193. S2CID 910409. - ↑ "Added Grisu3 algorithm support for double.ToString(). by mazong1123 · Pull Request #14646 · dotnet/coreclr".
*GitHub*. - ↑ Adams, Ulf (2018-12-02). "Ryū: fast float-to-string conversion".
*ACM SIGPLAN Notices*.**53**(4): 270–282. doi: 10.1145/3296979.3192369 . S2CID 218472153. - ↑ "google/double-conversion". 2020-09-21.
- ↑ Lemire, Daniel (2021-03-22). "Number Parsing at a Gigabyte per Second". arXiv: 2101.11408 [cs.DS].
- ↑ Patterson, David A.; Hennessy, John L. (2014).
*Computer Organization and Design, The Hardware/Software Interface*. The Morgan Kaufmann series in computer architecture and design (5th ed.). Waltham, MA: Elsevier. p. 793. ISBN 9789866052675. - 1 2 USpatent 3037701A,Huberto M Sierra,"Floating decimal point arithmetic control means for calculator",issued 1962-06-05
- 1 2 Kahan, William Morton (1997-10-01). "Lecture Notes on the Status of IEEE Standard 754 for Binary Floating-Point Arithmetic" (PDF). p. 9.
- ↑ "D.3.2.1".
*Intel 64 and IA-32 Architectures Software Developers' Manuals*.**1**. - ↑ Harris, Richard (October 2010). "You're Going To Have To Think!".
*Overload*(99): 5–10. ISSN 1354-3172 . Retrieved 2011-09-24.Far more worrying is cancellation error which can yield catastrophic loss of precision.

- ↑ Christopher Barker:
*PEP 485 -- A Function for testing approximate equality* - ↑ "Patriot missile defense, Software problem led to system failure at Dharhan, Saudi Arabia". US Government Accounting Office. GAO report IMTEC 92-26.
- ↑ Wilkinson, James Hardy (2003-09-08). Ralston, Anthony; Reilly, Edwin D.; Hemmendinger, David (eds.).
*Error Analysis*.*Encyclopedia of Computer Science*. Wiley. pp. 669–674. ISBN 978-0-470-86412-8 . Retrieved 2013-05-14. - ↑ Einarsson, Bo (2005).
*Accuracy and reliability in scientific computing*. Society for Industrial and Applied Mathematics (SIAM). pp. 50–. ISBN 978-0-89871-815-7 . Retrieved 2013-05-14. - 1 2 3 4 Higham, Nicholas John (2002).
*Accuracy and Stability of Numerical Algorithms*(2 ed.). Society for Industrial and Applied Mathematics (SIAM). pp. 27–28, 110–123, 493. ISBN 978-0-89871-521-7. 0-89871-355-2. - ↑ Oliveira, Suely; Stewart, David E. (2006-09-07).
*Writing Scientific Software: A Guide to Good Style*. Cambridge University Press. pp. 10–. ISBN 978-1-139-45862-7. - 1 2 Kahan, William Morton (2005-07-15). "Floating-Point Arithmetic Besieged by "Business Decisions"" (PDF) (Keynote Address). IEEE-sponsored ARITH 17, Symposium on Computer Arithmetic. pp. 6, 18. Retrieved 2013-05-23.CS1 maint: location (link) (NB. Kahan estimates that the incidence of excessively inaccurate results near singularities is reduced by a factor of approx. 1/2000 using the 11 extra bits of precision of double extended.)
- ↑ Kahan, William Morton (2011-08-03). "Desperately Needed Remedies for the Undebuggability of Large Floating-Point Computations in Science and Engineering" (PDF). IFIP/SIAM/NIST Working Conference on Uncertainty Quantification in Scientific Computing Boulder CO. p. 33.
- 1 2 3 4 Kahan, William Morton (2000-08-27). "Marketing versus Mathematics" (PDF). pp. 15, 35, 47.
- ↑ Kahan, William Morton (2001-06-04). Bindel, David (ed.). "Lecture notes of System Support for Scientific Computation" (PDF).
- ↑ "General Decimal Arithmetic". Speleotrove.com. Retrieved 2012-04-25.
- ↑ Christiansen, Tom; Torkington, Nathan; et al. (2006). "perlfaq4 / Why is int() broken?". perldoc.perl.org. Retrieved 2011-01-11.
- ↑ Shewchuk, Jonathan Richard (1997). "Adaptive Precision Floating-Point Arithmetic and Fast Robust Geometric Predicates, Discrete & Computational Geometry 18": 305–363.Cite journal requires
`|journal=`

(help) - ↑ Kahan, William Morton; Ivory, Melody Y. (1997-07-03). "Roundoff Degrades an Idealized Cantilever" (PDF).

- Wilkinson, James Hardy (1963).
*Rounding Errors in Algebraic Processes*(1 ed.). Englewood Cliffs, NJ, USA: Prentice-Hall, Inc. ISBN 9780486679990. MR 0161456. (NB. Classic influential treatises on floating-point arithmetic.) - Wilkinson, James Hardy (1965).
*The Algebraic Eigenvalue Problem*.*Monographs on Numerical Analysis*(1 ed.). Oxford University Press / Clarendon Press. ISBN 9780198534037 . Retrieved 2016-02-11. - Sterbenz, Pat H. (1974-05-01).
*Floating-Point Computation*. Prentice-Hall Series in Automatic Computation (1 ed.). Englewood Cliffs, New Jersey, USA: Prentice Hall. ISBN 0-13-322495-3. - Golub, Gene F.; van Loan, Charles F. (1986).
*Matrix Computations*(3 ed.). Johns Hopkins University Press. ISBN 978-0-8018-5413-2. - Press, William Henry; Teukolsky, Saul A.; Vetterling, William T.; Flannery, Brian P. (2007) [1986].
*Numerical Recipes - The Art of Scientific Computing*(3 ed.). Cambridge University Press. ISBN 978-0-521-88407-5. (NB. Edition with source code CD-ROM.) - Knuth, Donald Ervin (1997). "Section 4.2: Floating-Point Arithmetic".
*The Art of Computer Programming*. 2:*Seminumerical Algorithms*(3 ed.). Addison-Wesley. pp. 214–264. ISBN 978-0-201-89684-8. - Blaauw, Gerrit Anne; Brooks, Jr., Frederick Phillips (1997).
*Computer Architecture: Concepts and Evolution*(1 ed.). Addison-Wesley. ISBN 0-201-10557-8. (1213 pages) (NB. This is a single-volume edition. This work was also available in a two-volume version.) - Savard, John J. G. (2018) [2005], "Floating-Point Formats",
*quadibloc*, archived from the original on 2018-07-16, retrieved 2018-07-16 - Muller, Jean-Michel; Brunie, Nicolas; de Dinechin, Florent; Jeannerod, Claude-Pierre; Joldes, Mioara; Lefèvre, Vincent; Melquiond, Guillaume; Revol, Nathalie; Torres, Serge (2018) [2010].
*Handbook of Floating-Point Arithmetic*(2 ed.). Birkhäuser. doi:10.1007/978-3-319-76526-6. ISBN 978-3-319-76525-9. LCCN 2018935254.

- "Survey of Floating-Point Formats". (NB. This page gives a very brief summary of floating-point formats that have been used over the years.)
- Monniaux, David (May 2008). "The pitfalls of verifying floating-point computations". Association for Computing Machinery (ACM) Transactions on programming languages and systems (TOPLAS). (NB. A compendium of non-intuitive behaviors of floating point on popular architectures, with implications for program verification and testing.)
- OpenCores. (NB. This website contains open source floating-point IP cores for the implementation of floating-point operators in FPGA or ASIC devices. The project
*double_fpu*contains verilog source code of a double-precision floating-point unit. The project*fpuvhdl*contains vhdl source code of a single-precision floating-point unit.) - Fleegal, Eric (2004). "Microsoft Visual C++ Floating-Point Optimization". MSDN.

This page is based on this Wikipedia article

Text is available under the CC BY-SA 4.0 license; additional terms may apply.

Images, videos and audio are available under their respective licenses.

Text is available under the CC BY-SA 4.0 license; additional terms may apply.

Images, videos and audio are available under their respective licenses.