Ford MEL engine

Last updated
Ford MEL V8
Overview
Manufacturer Ford Motor Company
Also calledMarauder V8
Production19581967
Layout
Configuration Big-block 90° V8
Displacement 383–462 cu in (6.3–7.6 L)
Cylinder bore 109.2 mm (4.30 in)
111.3 mm (4.38 in)
Piston stroke 83.8 mm (3.30 in)
94 mm (3.7 in)
97.3 mm (3.83 in)
Valvetrain OHV 2 valves x cyl.
Compression ratio 10.1:1-10.5:1
Combustion
Supercharger On 1959 Lincoln-powered dragster only
Fuel system Holley or Carter AFB carburetors
Fuel type Gasoline
Cooling system Water-cooled
Output
Power output 280–400 hp (209–298 kW)
Torque output 475–485 lb⋅ft (644–658 N⋅m)
Chronology
Predecessor Lincoln Y-block V8
Successor Ford 385 V8

Ford developed the MEL ("Mercury-Edsel-Lincoln") engine series as the replacement for the Lincoln Y-block V8 engine for use in large passenger car applications. These engines were produced in Lima, Ohio at Ford's Lima Engine plant. They were in turn replaced by the 385 series engines.

Contents

All MEL engines had wedge-shaped combustion chambers formed between a flat head surface and an angle milled block deck (10 degrees off square with the bore axis), with the piston top determining the compression ratio and combustion chamber shape, similar to the Chevrolet Big-Block 348 combustion chamber, also introduced in 1958, and the later 409 and 427. Unlike the Chevrolet, which had staggered valves and scalloped or M-shaped valve covers, the MEL valves were inline with shaft mounted rocker arms like the FE model Ford engines which were introduced at the same time. As with the previous generation V8s, an open runner intake manifold was used, requiring the use of a stamped steel lifter valley cover similar to that of the Pontiac V8 engines. Also, the intake manifold provided no exhaust crossover passage to warm the air-fuel mixture. Further MEL engines employed two individual thermostats, aimed to improve the regulation of the engine's coolant temperature. It was introduced the same year Chrysler phased out the Hemi V8 for the Chrysler B engine which was also a wedge-shaped combustion chamber.

The MEL bore some mechanical similarities with the Ford FE, using similar components such as the oiling system, bolt patterns, and valve stems; however, the MEL was a Lincoln-specific engine and was even larger in displacement capacity. The main bearings were 73.66 mm (2.900 in), while the rod bearings were 66.04 mm (2.600 in). The connecting rod beam had a unique triangular shape with the shoulders for the bolts sitting low toward the cap mating surface 12 in (13 mm). There was one major difference between the MEL and FE engines besides their size and weight; the valves on MEL engines were arranged in alternating fashion (I-E-I-E-I-E-I-E) and not in the manner of the FE (E-I-E-I-I-E-I-E) where the I indicates an intake valve and the E indicates an exhaust valve.

The MEL was one of three new engine families introduced by Lincoln and Ford in 1958. The others were the FE (Ford Edsel) and SD (super duty), the latter being large and extra powerful, slow-revving engines engineered for heavy-duty work trucks. The FE engine saw its use in the Edsel, a model which was introduced to the vehicle lineup by Ford, described as a car which blended design features of the Ford and Mercury lines combining them with its own individual styling. Further several new Lincoln vehicles, such as the Continental luxury sedan and coupe, as well as the all-new four-seat Thunderbird of the same year, which were brought to market with the new engines.

383

The 383 cu in (6.3 L)Marauder was the smallest member of the family. Produced from 1958 through 1960, it was only used in Mercury vehicles. It used a 109.2 mm × 83.8 mm (4.30 in × 3.30 in) bore and stroke. Output began at 312 or 330 hp (233 or 246 kW), both with a four-barrel carburetor. The 322 hp (240 kW) was the only output for 1959, and power dropped to 280 hp (209 kW) for the final year.

410

The MEL 410 cu in (6.7 L) engine was the only engine offered in the 1958 Edsel Citation and Corsair models. It was rated at 345 hp (257 kW) and 475 lb⋅ft (644 N⋅m). Bore and stroke were 4.20 and 3.70 inches respectively. It was not an option on the Pacer, Ranger or station wagon models, which exclusively used the FE 361 engine.

There were no other Ford Motor Company applications for this engine such as in Ford and Mercury cars and Ford Trucks. The MEL engine range also included 383 (exclusive to Mercury), 430 (Thunderbird, Mercury, Lincoln, Continental, and Lincoln Continental) and a 462 cu in (7.6 L) engine that was exclusive to Lincoln Continentals. In 1965, Ford produced a 410 version of the FE engine that was exclusive to Mercury. Other than displacement, there is no relation between the two engines.

430

The 430 cu in (7.0 L) engine was produced from 1958 through 1965. It was the standard engine on all 1958 to 1960 Lincolns and Continentals. Power was 375 hp (280 kW) in 1958, 350 hp (261 kW) in 1959, 315 hp (235 kW) in 1960, 325 hp (242 kW) in 1961 and 340 hp (254 kW) in 1964. It was an optional engine on all Mercurys from 1958 to 1960 but Mercury models had a little less horsepower than the Lincolns and Continentals. The 430 was also an optional engine in 1959 and 1960 Ford Thunderbirds. It was commonly referred to as the Thunderbird 430 Special. The 1958 Super Marauder version used 3 two-barrel carburetors to generate 400 hp (298 kW), the first American production car to reach this figure. It was an option on all 430 equipped 1958 Mercurys and all 1958 Lincolns and Continentals. This engine featured the tripower intake manifold, which was cast for Ford by Moon products. Three Holley 2300 carburetors were used. The 430 had a 109.2 mm (4.30 in) bore (same as the 383) and shared the 94 mm (3.7 in) stroke of the 410.

The compression ratio started at 10.5:1 for 360 hp (268 kW), 375 hp (280 kW), and 400 hp (298 kW), but was reduced to 10.0:1 the following year. These 1959 engines produced 345–350 hp (257–261 kW), but power was down to 315 hp (235 kW) for 1960.

Some 1958 Continental Mark IIIs came brand new with the Holley 4150 four-barrel carburetor. New pistons and a four-barrel carburetor were added for 1963; the 10.1:1 compression brought output back to 345 hp (257 kW).

One of the later installations of the 430 was in the renowned 1961-65 Lincoln Continental [1] — the sleek, slab-sided eleganza styled by Elwood Engel before he moved-on to the Chrysler Corporation in November 1961. This fourth-generation Continental was so successful that it helped save the Lincoln Division from Ford President Robert McNamara’s cost-cutters; this model was also selected to serve as the Presidential State Car during the Kennedy administration. The subsequent bored & stroked version of the MEL (the "462" detailed below) was installed in 1966-68 Continentals; however, during the 1968 run, Ford’s new 460 cu in (7.5 L) 385-series "Lima" engine was phased-in and replaced the MEL, which was discontinued entirely. Note that for 1970, the Continental was completely reworked to create its fifth generation, which, for the first time, shared a chassis with the Mercury Marquis & Ford LTD.

The 430 engine in particular had a limited but storied history in hot-rodding. The first Miami to Nassau race won by Bertram Yachts (which subsequently helped establish their name) featured a boat powered by twin 430 MEL engines. In the 1959 NASCAR season, Holman Moody campaigned a number of Thunderbirds, at least some of which were powered by 430s. At least one car survives. The cars were ponderous handlers because of the heavy engine, but successful runners. The Holman Moody 430 Thunderbirds caught the attention of Ford after one of them, driven by Johnny Beauchamp, finished a close second to Lee Petty at the 1959 Daytona 500. Houston's Rodney Singer and crew chief Karol Miller used a GMC supercharged Lincoln-powered dragster to win the 1959 NHRA Nationals Top Eliminator. Theirs was the first supercharged TE in NHRA history, starting a string which has continued through the present.

Because of the changing nature of heads, intakes and piston designs, as well as a limited life span, not many aftermarket speed parts were made for the MEL line of engines. Edelbrock made a 6X2 intake manifold and a set of water-cooled marine exhaust manifolds (M4) and Weiand made a Drag Star 8X2 manifold as well. Oversize pistons for early drag racers or blown 430s were made, including sets by Jahns Pistons at 13:1 and 0.15 in (3.8 mm) over standard bore. Other speed parts have been rumored, but they are difficult to find.

462

The 430 was replaced by the 462 cu in (7.6 L) engine in 1966. Bore and stroke were entirely different at 111.3 mm × 97.3 mm (4.38 in × 3.83 in) and the 462 MEL engine produced 340 hp (254 kW) and as much as 485 lb⋅ft (658 N⋅m) of torque. This engine was fitted with hydraulic lifters and a four-barrel Carter AFB carburetor. This large torquey engine was used only in Lincoln Continentals, from 1966 until mid-year in 1968 when it was replaced by the 385-series 460. Production ended after 1968. The production facilities in Lima were converted to produce the new Ford 385 engine family.

Applications

See also


Related Research Articles

<span class="mw-page-title-main">Mercury Comet</span> Motor vehicle

The Mercury Comet is an automobile that was produced by Mercury from 1960–1969 and 1971–1977 — variously as either a compact or an intermediate car. In its first two years, it was marketed as the "Comet" and from 1962 as the "Mercury Comet".

<span class="mw-page-title-main">Ford Thunderbird</span> American car model

The Ford Thunderbird is a personal luxury car manufactured and marketed by Ford from model years 1955 to 2005, across 11 generations. Introduced as a two-seat convertible, the Thunderbird was offered variously as a four-seat hardtop coupe, four-seat convertible, five-seat convertible and hardtop, four-door pillared hardtop sedan, six-passenger hardtop coupe, and five-passenger pillared coupe, with the final generation designed again as a two-seat convertible.

<span class="mw-page-title-main">Ford FE engine</span> Reciprocating internal combustion engine

The Ford FE engine is a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976. The FE was introduced to replace the short-lived Ford Y-block engine, which American cars and trucks were outgrowing. It was designed with room to be significantly expanded, and manufactured both as a top-oiler and side-oiler, and in displacements between 332 cu in (5.4 L) and 428 cu in (7.0 L).

<span class="mw-page-title-main">Ford 385 engine</span> Reciprocating internal combustion engine

The Ford 385 engine family is a series of big-block V8 engines designed and manufactured by Ford Motor Company. The family derives its name from the 3.85-inch (98 mm) crankshaft stroke of the 460 cubic-inch V8 introduced in 1968. A 429 cu in (7.0 L) version was also introduced the same year, with a 370 cu in (6.1 L) variant appearing in 1977.

<span class="mw-page-title-main">Ford CVH engine</span> Reciprocating internal combustion engine

The Ford CVH engine is a straight-four automobile engine produced by the Ford Motor Company. The engine's name is an acronym for either Compound Valve-angle Hemispherical or Canted Valve Hemispherical, where "Hemispherical" describes the shape of the combustion chamber. The CVH was introduced in 1980 in the third generation European Escort and in 1981 in the first generation North American Escort. Engines for North America were built in Ford's Dearborn Engine plant, while engines for Europe and the UK were built in Ford's then-new Bridgend Engine plant in Wales.

<span class="mw-page-title-main">Ford 335 engine</span> Reciprocating internal combustion engine

The Ford 335 engine family was a group of engines built by the Ford Motor Company between 1969 and 1982. The "335" designation reflected Ford management's decision to produce an engine of that size with room for expansion during its development. This engine family began production in late 1969 with a 351 cu in (5.8 L) engine, commonly called the 351C. It later expanded to include a 400 cu in (6.6 L) engine which used a taller version of the engine block, commonly referred to as a tall deck engine block, a 351 cu in (5.8 L) tall deck variant, called the 351M, and a 302 cu in (4.9 L) engine which was exclusive to Australia.

<span class="mw-page-title-main">Ford small block engine</span> Reciprocating internal combustion engine

The Ford small-block is a series of 90° overhead valve small-block V8 automobile engines manufactured by the Ford Motor Company from July 1961 to December 2000.

The Y-block engine is a family of overhead valve V8 automobile engines produced by Ford Motor Company. The engine is well known and named for its deep skirting, which causes the engine block to resemble a Y. It was introduced in 1954 as a more modern replacement for the outdated side-valved Ford Flathead V8 and was used in a variety of Ford vehicles through 1964.

<span class="mw-page-title-main">Chrysler B engine</span> Reciprocating internal combustion engine

The Chrysler B and RB engines are a series of big-block V8 gasoline engines introduced in 1958 to replace the Chrysler FirePower engines. The B and RB engines are often referred to as "wedge" engines because they use wedge-shaped combustion chambers; this differentiates them from Chrysler's 426 Hemi big block engines that are typically referred to as "Hemi" or "426 Hemi" due to their hemispherical shaped combustion chambers. The corporation had been seeking a smaller and lighter replacement for its FirePower engines, in part because new styling dictates meant moving the engine forward in the chassis which negatively affected weight distribution.

<span class="mw-page-title-main">Chevrolet big-block engine</span> American V-8 car engine

The Chevrolet Mark Engines colloquially referred to as the big block is a family of large-displacement, naturally-aspirated, 90°, overhead valve, gasoline-powered, V8 engines; that were developed and produced by the Chevrolet Division of General Motors, from the 1950s until present.

<span class="mw-page-title-main">Ford Essex V6 engine (Canadian)</span> Reciprocating internal combustion engine

The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.

<span class="mw-page-title-main">Ford HSC engine</span> Reciprocating internal combustion engine

The Ford HSC engine is an automobile gasoline engine from the Ford Motor Company, sold from 1984 until 1994. HSC stands for High Swirl Combustion. It was made in two displacements: 2.3 L and 2.5 L, and used in only two model lines: the Ford Tempo/Mercury Topaz and the Ford Taurus/Mercury Sable.

<span class="mw-page-title-main">Oldsmobile V8 engine</span> Reciprocating internal combustion engine

The Oldsmobile V8, also referred to as the Rocket, is a series of engines that was produced by Oldsmobile from 1949 until 1990. The Rocket, along with the 1949 Cadillac V8, were the first post-war OHV crossflow cylinder head V8 engines produced by General Motors. Like all other GM divisions, Olds continued building its own V8 engine family for decades, adopting the corporate Chevrolet 350 small-block and Cadillac Northstar engine only in the 1990s. All Oldsmobile V8s were manufactured at plants in Lansing, Michigan while the engine block and cylinder heads were cast at Saginaw Metal Casting Operations.

The Ford Motor Company produced straight-six engines from 1906 until 1908 and from 1941 until 2016. In 1906, the first Ford straight-six was introduced in the Model K. The next was introduced in the 1941 Ford. Ford continued producing straight-six engines for use in its North American vehicles until 1996, when they were discontinued in favor of more compact V6 designs.

<span class="mw-page-title-main">Lincoln Y-block V8 engine</span> Reciprocating internal combustion engine

The Lincoln Y-block V8 engine was Ford's earliest OHV V8 engine, introduced by Lincoln in the 1952 model year. Like the later and better-known but even more short-lived Ford Y-block engine, its block's deep skirts gave the block the appearance of the letter Y from the front.

<span class="mw-page-title-main">Mercury Colony Park</span> Motor vehicle

The Mercury Colony Park is an American luxury full-size station wagon that was marketed by the Mercury division of Ford Motor Company between 1957 and 1991. Distinguished by its simulated wood-grain paneling, the Colony Park was marketed as either the premium-trim or the sole full-size station wagon offering of the division. Following the 1960 demise of Edsel, full-size Mercury vehicles shared bodywork with Ford; the Colony Park served as the counterpart of the Ford Country Squire through 1991.

<span class="mw-page-title-main">Chrysler Hemi engine</span> Series of I6 and V8 engines built by Chrysler

The Chrysler Hemi engines, known by the trademark Hemi or HEMI, are a series of American V8 gasoline engines built by Chrysler with overhead valve hemispherical combustion chambers. Three different types of Hemi engines have been built by Chrysler for automobiles: the first from 1951 to 1958, the second from 1964 to 1971, and the third beginning in 2003. Although Chrysler is most identified with the use of "Hemi" as a marketing term, many other auto manufacturers have incorporated similar designs. The engine block and cylinder heads were cast and manufactured at Indianapolis Foundry.

<span class="mw-page-title-main">Lincoln Capri</span> Motor vehicle

The Lincoln Capri is an automobile that was sold by the Lincoln division of Ford Motor Company from 1952 until 1959. A full-size luxury car, the Lincoln Capri derives its name from an Italian island in the Gulf of Naples. Introduced as a premium trim variant of the two-door Lincoln Cosmopolitan, the Capri was introduced in 1952 as a stand-alone model line serving as the premium Lincoln. With the introduction of the Lincoln Premiere, the Capri replaced the Cosmopolitan as the standard Lincoln product line.

<span class="mw-page-title-main">Edsel Pacer</span> Motor vehicle

The Edsel Pacer is an automobile that was produced and sold by Edsel in 1958. The Pacer was based on the shorter narrower Edsel platform, shared with Ford and the Ranger.

<span class="mw-page-title-main">Mercury Marauder</span> Motor vehicle

The Mercury Marauder is an automobile nameplate that was used for three distinct full-size cars produced by the Mercury division of Ford Motor Company. Deriving its name from the most powerful engines available to the Mercury line, the Marauder was marketed as the highest-performance version of the full-size product range.

References

  1. "1965 Lincoln Continental Brochure". www.oldcarbrochures.com. The Old Car Manual Project. Retrieved 2 September 2023. Engine: 90° OHV V-8, 430 cubic-inch displacement … Advertised horsepower 320 @ 4600 r.p.m. Advertised torque 465 lb.-ft. @ 2600 r.p.m. Four-barrel carburetor. Premium fuel … Rear Axle: 2.89:1 gear ratio … Options include [partial list]: Directed-power differential; 3.11:1 rear axle for mountainous areas; Transistorized ignition system; Engine coolant heater; 55-ampere alternator; Spare-tire relocation kit ...