Harley-Davidson FL

Last updated
2019 Harley Davidson FLHT Harley Davidson FLHT Electra Glide.jpg
2019 Harley Davidson FLHT

The Harley-Davidson FL is a model designation used on Harley-Davidson motorcycles since 1941. The FL suffix is mostly applied to Harley-Davidson's large-framed bikes, including the current Touring series, and also the Softail series, especially those with traditional styling, 16-inch front wheels, and either Springer forks or large-diameter telescopic front forks.


Early FL models

The FL was introduced to the Harley-Davidson model line in 1941. It used a 74 cu in (1,210 cc) version of the "Knucklehead" OHV engine that powered the EL in 61 cu in (1,000 cc) form. The FL shared its frame with the EL and with the U and UL, which used a 74 cubic inch flathead engine. The FL replaced the UH and ULH, which used the same frame with 80 cu in (1,300 cc) flathead engines. [1]

The FL continued relatively unchanged until 1948, when it and the EL were given redesigned "Panhead" engines of the same capacities as before. These engines had several improvements over the earlier "Knuckleheads", including self-adjusting hydraulic lifters and aluminum cylinder heads to reduce weight and improve cooling. [2] The U and UL flathead twins were discontinued in 1948, leaving the OHV EL and FL models as Harley-Davidson's large-frame motorcycles. [3]


In 1949, a year after receiving the "Panhead" engine, the FL was given a new front suspension featuring hydraulically damped telescopic forks, replacing the leading link spring suspension of the time. [4] [5] These forks were standard on all big twin models for 1949, including the E, EL, F, and FL. [5] Harley-Davidson offered the spring suspension units on these models [4] [5] and recommended their use on sidecar combinations, because the hydraulic forks did not have enough trail to allow the combination to be stable enough for safe operation. [5]

During their debut model year of 1949, Harley-Davidson referred to their new suspension systems as the "hydraulic front ends". Harley-Davidson's marketing department promoted the new suspension systems by renaming the big twin models "Hydra Glide" for the 1950 model year. This was Harley-Davidson's first departure from its policy of using alphabetic lettering to identify its models. [4] This name would change twice in the history of the basic large-framed E and F series models, each time signaling an improvement in the bike's technology. [2] In addition, the Glide ending would be used on other models, based on both and FL and FX formats.[ citation needed ]

In 1952, the Hydra-Glide's transmission standard hand-shift/foot-clutch was supplemented by the optional foot-shift/hand-clutch. The original format continued to be offered as an option until 1978. [2] 1952 was also the last year of the 61 cu in (1,000 cc) EL, making the FL the last remaining large-frame model. [6]

Although the 1903 founding is now the basis for "Anniversary Models", Harley-Davidson's 50th Golden Anniversary was celebrated in 1954 with special paints and badges on the front fender. The first year of production was 1904.[ citation needed ]

A more highly tuned engine with high-compression heads, higher-lift cams, and polished ports, was offered with the FLH version of 1955. [7] The FLH designation has continued up to the present.[ citation needed ]


1961 FLH Duo-Glide Harley-Davidson Duo Glide 1961.jpg
1961 FLH Duo-Glide

The FL model was given a new frame in 1958. This frame included a rear swingarm suspended by a pair of coil-over-shock suspension units. In honor of this fully suspended chassis, the FL's model name was changed from Hydra-Glide to Duo-Glide. [8]

Unlike OHV configuration, aluminum heads, and telescopic-fork front suspension, however, this improvement in technology was applied to the small-frame bikes first, the K-series having received rear suspension in 1952. [9]


Electra Glide Ultra Classic. This is based on the Tour Glide frame, but uses the Electra Glide fork-mounted "batwing" fairing Harley.electraglide.750pix.jpg
Electra Glide Ultra Classic. This is based on the Tour Glide frame, but uses the Electra Glide fork-mounted "batwing" fairing

The third and final change given to the name of the basic FL model would occur in 1965, the final year of the "Panhead" engines. These last "Panheads" were the first "big-twin" Harley-Davidson engines to be equipped with electric starters, the Servi-Car having received electric start the year before. This innovation for Harley-Davidson was greeted with the new model name of Electra Glide. [2]

In 1966, the "Panhead" gave way to the "Shovelhead", gaining a ten percent increase in power in the process. [10]

A fork-mounted fairing became available on Electra Glides in 1969. This became unofficially known as the "batwing" fairing. [11] Although the batwing fairing was an easily removable option on early Electra Glides, it was not removable on later machines, as the instruments were moved from the fuel tank into the fairing.[ citation needed ]

Electra Glide Harley Electra Glide.jpg
Electra Glide

The FL frame was the basis for the 1971 FX Super Glide. The FX mated the FL frame with the forks of the XL Sportster, with buckhorn handlebars and a large fibreglass tailpiece completing the Super Glide specification. [12]

The FL was given a front disc brake in 1972. [13]

The three-speed plus reverse option was discontinued in 1977. [14]

A 1977 Harley-Davidson Confederate Edition of the FLH Electra Glide that featured commemorative paint and tank and fender decals was produced. The unit production was in such low volume numbers - only 44 - as to make it one of the rarest of the company's motorcycles. [15]

An 80 cu in (1,300 cc) engine was made optional on the Electra Glide in 1978. However, the FL designation was not changed as a result. [14] By 1981, the 80 cubic inch engine was the standard engine; the 74 cu in (1,210 cc) engine being discontinued. [16]

The low-compression FL engine was discontinued in 1979, as was the option for hand-shift/foot-clutch transmission controls. [2] [14]

Tour Glide

The FLT Tour Glide was introduced in 1979 as a 1980 model. [17] Sold alongside the existing FLH Electra Glide, the FLT had a larger frame with rubber engine mounts, a five-speed transmission, the 80 cu in (1,300 cc) engine, and a frame-mounted fairing. In order that the FLT frame, which was larger and heavier than the large and heavy FLH frame, would handle acceptably, the front forks were given radical steering geometry which had them mounted behind the steering head, with the frame behind the steering head being recessed to allow adequate steering lock. [16]

The FLHT was introduced in 1983. This was an Electra Glide based on the FLT Tour Glide frame, but using the Electra Glide "batwing" fairing instead of the Tour Glide frame-mounted fairing. [16] The police version of the FLHT is the FLHTP. [18]

Except for the base FLH, all 1984 FLs were equipped with the new rubber-mounted Evolution engine and a five-speed transmission. [19]

All "Shovelhead" engines were discontinued by the 1985 model year. [20] In that year, the four-speed solid-engine-mount FLH was modified to accept rubber mounting and the Evolution engine. The FLH was discontinued in 1986; all Touring models thereafter used the FLT/FLHT frame. [16] The FLT Tour Glide, which introduced the current Touring frame, was dropped from the lineup in 1996. A smaller version of the frame-mounted Tour fairing would return with the FLTR Road Glide in 1998. [21]

The Evolution engine was replaced by the Twin Cam 88 engine on all large-framed Harley-Davidson motorcycles in 1999. [16] The Twin Cam engine was enlarged from 88 cu.in. to 96  cu.in. in 2007. [22]

Unfaired Glides

2006 Road King Custom Harley-Davidson Road King Custom 2006.jpg
2006 Road King Custom

An unfaired version of the FLH Electra Glide, known as the FLHS Electra Glide Sport, was available from 1977 to 1984. the early versions had two into one cigar mufflers then were replaced by staggered same side duals. An unfaired FLH Electra Glide was reintroduced as the FLHS Electra Glide Sport again in 1989 through 1993, the FLHS Electra Glide Sport was eventually replaced by the FLHR Road King in 1994, which continues to the present day.[ citation needed ]

2009 Touring chassis

For the 2009 model year, Harley-Davidson redesigned the entire touring range. The changes included a new frame, new swingarm, a completely revised engine-mounting system, 17-inch front wheels for all models except the Road King Classic, a 6 US gallons (23 l; 5.0 imp gal) fuel tank, and a 2-1-2 exhaust. The changes result in greater load carrying capacity, better handling, a smoother engine, longer range and less exhaust heat transmitted to the rider and passenger. [23] [24]

Tri-Glide Ultra Classic

Also released in the FL Touring range for the 2009 model year was the FLHTCUTG Tri Glide Ultra Classic, the first three-wheeled Harley-Davidson since the Servi-Car was discontinued in 1973. This model features a unique frame and a 103 cid engine exclusive to the trike. [25]

FL Softails

2002 FLSTC Heritage Softail Classic. Evb-my hog.jpg
2002 FLSTC Heritage Softail Classic.

Harley-Davidson introduced the Softail chassis in 1984. [26] The original Softails used the small FX telescopic forks, but the FLST Heritage Softail with large FL telescopic forks was introduced in 1986. The FLSTC Heritage Softail Classic, with large front forks and retro styling, was in production by 1988. [27]

Other Softails with big forks followed, including the 1990 introduction of the FLSTF Fat Boy and the 1993-only FLSTN "Cow Glide". [28] [29] The base FLST Heritage Special was discontinued in 1991. [16] The FLSTN was continued after 1993 without the bovine motif as the Nostalgia model until 1996, it was replaced by the FLSTS Heritage Springer IN 1997. The Heritage Springer was produced through 2003, with the FLSTSC Springer Classic introduced in 2005. [16] The Heritage Springer and Springer Classic are designated as an FL despite using Springer forks instead of the large FL telescopic forks. [30]

In 2000, all Softails, including the FL models, were switched from the Evolution engine to the counterbalanced Twin Cam 88B engine specially developed for the rigid engine mounting in this frame. [16] The FLSTN designation returned in 2005 with the Softail Deluxe. [31]

FLD Dyna Switchback

Harley-Davidson introduced the FLD Dyna Switchback in 2012. [32] Designed to be reminiscent of the late 1950s Duo Glide models, [33] the Switchback is the first Dyna platform motorcycle from Harley-Davidson to use an FL front end, and is marketed as a convertible model, with removable saddlebags and windscreen allowing the user to easily convert the bike for touring use. [34]

See also


  1. Mitchell p. 95
  2. 1 2 3 4 5 Mitchell pp. 134-135
  3. Mitchell p. 141
  4. 1 2 3 Palmer, Bruce (III). How To Restore your Harley-Davidson. Vol. 1 (2nd ed.). Palmer Publications.
  5. 1 2 3 4 Field, Greg (2002). Original Harley-Davidson Panhead. St. Paul, MN US: MBI Publishing. p. 27. ISBN   0-7603-1062-9.
  6. Mitchell p. 150
  7. Mitchell p. 164
  8. Mitchell p. 186
  9. Mitchell p. 158
  10. Mitchell p. 206
  11. The A-Z of Harley-Davidson Part Two
  12. Mitchell p. 234
  13. Mitchell p. 244
  14. 1 2 3 Mitchell p. 258
  15. Harley-Davidson Confederate Edition, Motorcycle Classics
  16. 1 2 3 4 5 6 7 8 The A-Z of Harley-Davidson Part Three
  17. Harley-Davidson Buyer's Guide: 1984-2011, p. 22
  18. "Harley-Davidson FLHTP Electra Glide Police" (PDF). Archived from the original (PDF) on 2016-03-04. Retrieved 2015-07-11.
  19. Mitchell p. 273
  20. Mitchell p. 274
  21. Edwards, David (October 1997), Edwards, David (ed.), "Harley 1998: New Hogs Go To Market", Cycle World , Newport Beach, CA USA: Hachette Filipacchi Magazines, vol. 36, no. 10, pp. 26–27, ISSN   0011-4286 , retrieved 2013-05-04, Leading the way is the all-new FLTR Road Glide... Most obvious is the new frame-mounted fairing, a downsized, streamlined version of the bodywork first seen on the Tour Glide of 1980
  22. Edge, Alex (2006-08-04). Edge, Dirck (ed.). "MD First Test: Harley-Davidson's New Twin-Cam 96 Engine and Cruise Drive Six-Speed Transmission". Motorcycle Daily. Archived from the original on 2010-12-28. Retrieved 2013-05-04.
  23. Harley-Davidson 2009 model line
  24. Edge, Dirck, Harley-Davidson Touring Models and V-Rod Muscle - MD First Rides
  25. 2009 Harley-Davidson Tri Glide Ultra Classic Archived 2008-08-22 at the Wayback Machine
  26. Mitchell p. 272
  27. Mitchell p. 277
  28. Mitchell p. 311
  29. Mitchell p. 288
  30. 2007 Harley-Davidson Softail Springer Classic specifications
  31. 2007 Harley-Davidson Softail specifications
  32. "2012 Harley-Davidson FLD Dyna Switchback". Total Motorcycle.
  33. Frank, Aaron; Riles, Tom (8 September 2011). "2012 Harley-Davidson Switchback". Motorcyclist . Retrieved 18 October 2016.
  34. Elvidge, Jamie; Allen, Jeff (14 May 2014). "Harley-Davidson Switchback — Long-Term Test Wrap-Up". Cycle World . Retrieved 18 October 2016.

Related Research Articles

Harley-Davidson American motorcycle manufacturer

Harley-Davidson, Inc., H-D, or Harley, is an American motorcycle manufacturer founded in 1903 in Milwaukee, Wisconsin. Along with Indian, it was one of two major American motorcycle manufacturers to survive the Great Depression. The company has survived numerous ownership arrangements, subsidiary arrangements, periods of poor economic health and product quality, and intense global competition to become one of the world's largest motorcycle manufacturers and an iconic brand widely known for its loyal following. There are owner clubs and events worldwide, as well as a company-sponsored, brand-focused museum.

Indian Motocycle Manufacturing Company Motorcycle manufacturer

Indian Motorcycle is an American brand of motorcycles originally produced from 1901 to 1953 in Springfield, Massachusetts, United States. Hendee Manufacturing Company initially produced the motorcycles, but the name was changed to the Indian Motocycle Manufacturing Company in 1923.

Chopper (motorcycle) Type of motorcycle

A chopper is a type of custom motorcycle which emerged in California in the late 1950s. A chopper employs radically modified steering angles and lengthened forks for a stretched-out appearance. They can be built from an original motorcycle which is modified ("chopped") or built from scratch. Some of the characteristic features of choppers are long front ends with extended forks often coupled with an increased rake angle, hardtail frames, very tall "ape hanger" or very short "drag" handlebars, lengthened or stretched frames, and larger than stock front wheels. The "sissy bar", a set of tubes that connect the rear fender with the frame, and which are often extended several feet high, is a signature feature on many choppers.

Buell Motorcycle Company American motorcycle manufacturer

Buell Motorcycles is an American motorcycle manufacturer based in Grand Rapids, MI and was founded in 1983 by ex-Harley-Davidson engineer Erik Buell. Harley-Davidson acquired 49% of Buell in 1993, and Buell became a wholly owned subsidiary of Harley-Davidson by 2003. On November 17, 2006, Buell announced that it had produced and shipped its 100,000th motorcycle.


A swingarm, or "swinging arm" (UK), originally known as a swing fork or pivoted fork, is a single or double sided mechanical device which attaches the rear wheel of a motorcycle to its body, allowing it to pivot vertically. The main component of the rear suspension of most modern motorbikes and ATVs, it holds the rear axle firmly, while pivoting to absorb bumps and suspension loads induced by the rider, acceleration, and braking.


A softail is a motorcycle with its rear suspension springs or shock absorbers located out of direct view, so as to look like a hard-tail motorcycle.

Harley-Davidson Panhead engine

The panhead is an overhead-valve Harley-Davidson motorcycle engine, so nicknamed because the rocker covers resembled cooking pans. The engine is a two-cylinder, two-valve-per-cylinder, pushrod V-twin, made in both 61 c.i. (EL) and 74 c.i. displacements. The Panhead engine replaced the Knucklehead engine in 1948 and was manufactured until 1965 when it was replaced by the Shovelhead.

Harley-Davidson Sportster

The Harley-Davidson Sportster is a line of motorcycles produced continuously since 1957 by Harley-Davidson. Sportster models are designated in Harley-Davidson's product code by beginning with "XL". In 1952, the predecessors to the Sportster, the Model K Sport and Sport Solo motorcycles, were introduced. These models K, KK, KH, and KHK of 1952 to 1956 had a sidevalve engine, whereas the later XL Sportster models use an overhead valve engine. The first Sportster in 1957 had many of the same details of the KH including the frame, fenders, large gas tank and front suspension.

Kawasaki police motorcycles

Kawasaki police motorcycles have been produced in four series:

Harley-Davidson Shovelhead engine

The Shovelhead engine is a motorcycle engine that was produced by Harley-Davidson from 1966 to 1984, built as a successor to the previous Panhead engine. When the engine was first produced, the Shovelhead had a shallower combustion chamber, larger valve drop for both intake and exhaust, better porting, and stronger valves and pistons. This gave the new engine an extra 10 horsepower, along with a different appearance. The engine gained the nickname “Shovelhead” due to the look of the rocker heads having the appearance of an old coal shovel that was flipped upside down, giving the appearance of a shovel. While the engine did have problems earlier in its timeline, the new and improved motor gave Harley-Davidson a 26% sales increase.

The Harley-Davidson Twin Cam are motorcycle engines made by Harley-Davidson from 1998 to 2017. Although these engines differed significantly from the Evolution engine, which in turn was derived from the series of single camshaft, overhead valve motors that were first released in 1936, they share a number of characteristics with nearly all previous Harley-Davidson engines. Both engines have two cylinders in a V-twin configuration at 45°, are air-cooled, and activate valves with push-rods. The crankshafts have a single pin with a knife and fork arrangement for the connecting rods. These are sandwiched between a pair of flywheels.

Motorcycle fork Component of motorized two-wheelers

A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis. Most forks incorporate the front suspension and front brake, and allow the front wheel to rotate about the steering axis so that the bike may be steered. Most handlebars attach to the top clamp in various ways, while clip-on handlebars clamp to the fork tubes, either just above or just below the upper triple clamp.

The Harley-Davidson Super Glide was a motorcycle made by the Harley-Davidson. Reputed to be the first factory custom motorcycle, it originated Harley-Davidson's FX series of motorcycles by mating Sportster components, most notably the front end, with the chassis of their larger big twin motorcycles. Super Glide models from 1991 to 2018 were based on the Dyna Glide chassis which has a wider variety of front ends and trim levels, and for a time filled the intermediate niche between the smallest and largest Harley-Davidson models; the Dyna platform has since been discontinued for the 2018 model year in favor of the new Softail frame, with some models from the Dyna nameplate being carried over to the Softail line.They are an exclusive stock

Harley-Davidson Servi-Car

The Harley-Davidson Servi-Car was a three-wheeled utility motorcycle manufactured by Harley-Davidson from 1932 to 1973.

Harley-Davidson Hummer

The Hummer was a motorcycle model manufactured by Harley-Davidson from 1955 to 1959. However, the name "Hummer" is now incorrectly used generically to refer to all American-made single-cylinder two-stroke Harley-Davidson motorcycles manufactured from 1948 to 1966. These motorcycles were based on the DKW RT125, the drawings for which were taken from Germany as war reparations after World War II. The RT125 drawings were also given to the United Kingdom and the Soviet Union as war reparations, resulting in the BSA Bantam and the MMZ M-1A Moskva, later known as the Minsk.

Harley-Davidson CVO

Harley-Davidson CVO for motorcycles are a family of models created by Harley-Davidson for the factory custom market. For every model year since the program's inception in 1999, Harley-Davidson has chosen a small selection of its mass-produced motorcycle models and created limited-edition customizations of those platforms with larger-displacement engines, costlier paint designs, and additional accessories not found on the mainstream models. Special features for the CVO lineup have included performance upgrades from Harley's "Screamin' Eagle" branded parts, hand-painted pinstripes, ostrich leather on seats and trunks, gold leaf incorporated in the paint, and electronic accessories like GPS navigation systems and iPod music players.

Harley-Davidson Confederate Edition

The Harley-Davidson Confederate Edition was a cross-range limited edition motorcycle made by Harley-Davidson in 1977. It was released following the successful manufacture of the Liberty Edition to commemorate the United States Bicentennial in 1976. The Confederate Edition consisted of a special commemorative paint scheme of metallic gray paint and 'rebel' flag decals on the fuel tank and an army general's sleeve braid decal on the front fender and which was applied to the Harley-Davidson Super Glide, FLH Electra Glide, Harley-Davidson Sportster XLH, XLCH and XLT models.

Indian Model O

The Indian Model O was a lightweight motorcycle made by the Hendee Manufacturing Company from 1917 to 1919. Indian expected to sell the Model O to young or thrifty riders. The United States' entry into World War I caused Indian to shift manufacture to military motorcycles, and the low cost of the Ford Model T caused the market for lightweight motorcycles to collapse.

Harley-Davidson Milwaukee-Eight engine

The Harley-Davidson Milwaukee-Eight engine is the ninth generation of "big twin" engines developed by the company, but only Harley's third all-new Big Twin in 80 years, first introduced in 2016. These engines differ from the traditional Harley Big Twin engines in that there are four valves per cylinder, totaling eight valves, hence the name. It also marked a return to the single-camshaft configuration as used on previous Harley Big Twin Engines from 1936 to 1999. In addition, the engines all have internal counterbalancers, whereas Twin Cams were counterbalanced only on Softail models, where the engine was rigidly mounted.

Harley-Davidson Fat Boy V-twin softail cruiser motorcycle with solid-cast disc wheels

The Harley-Davidson Fat Boy, is a V-twin softail cruiser motorcycle with solid-cast disc wheels. Designed by Willie G. Davidson and Louie Netz, Harley-Davidson built a prototype Fat Boy in Milwaukee for the Daytona Bike Week rally at Daytona Beach in 1988 and 1989. Fat Boys produced from 1990-2017 are coded FLSTF, and FLFB from 2018.