The Service Switching Point (SSP) receives a message (ISUP Message) initiated by the Calling Party, this could be an IAM (Initial Address Message). The SSP evaluates the nature of the message, in the case of the IAM the called and calling party numbers. From this it determines whether it can route the call or whether it needs further instructions. In this case if the SSP does require further instructions it sends an IDP to a service control point SCP via an IN protocol. The protocol may be INAP but could be CAMEL, or bespoke INAP flavours such as Ericsson INAP, Nokia INAP, Siemens INAP or Huawei INAP.
In telephony, a service switching point (SSP) is the telephone exchange that initially responds, when a telephone caller dials a number, by sending a query to a central database called a service control point (SCP) so that the call can be handled. The service switching point uses the Signalling System No. 7 (SS7) protocols which are responsible for the call setup, management, and termination with other service switching points.
This article related to telephony is a stub. You can help Wikipedia by expanding it. |
SMS is a text messaging service component of most telephone, internet, and mobile-device systems. It uses standardized communication protocols to enable mobile devices to exchange short text messages. An intermediary service can facilitate a text-to-voice conversion to be sent to landlines. SMS was the most widely used data application at the end of 2010, with an estimated 3.5 billion active users, or about 80% of all mobile subscribers.
The Session Initiation Protocol (SIP) is a signaling protocol used for initiating, maintaining, and terminating real-time sessions that include voice, video and messaging applications. SIP is used for signaling and controlling multimedia communication sessions in applications of Internet telephony for voice and video calls, in private IP telephone systems, in instant messaging over Internet Protocol (IP) networks as well as mobile phone calling over LTE (VoLTE).
Circuit switching is a method of implementing a telecommunications network in which two network nodes establish a dedicated communications channel (circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the channel and remains connected for the duration of the communication session. The circuit functions as if the nodes were physically connected as with an electrical circuit.
The Intelligent Network (IN) is the standard network architecture specified in the ITU-T Q.1200 series recommendations. It is intended for fixed as well as mobile telecom networks. It allows operators to differentiate themselves by providing value-added services in addition to the standard telecom services such as PSTN, ISDN on fixed networks, and GSM services on mobile phones or other mobile devices.
Telephony is the field of technology involving the development, application, and deployment of telecommunication services for the purpose of electronic transmission of voice, fax, or data, between distant parties. The history of telephony is intimately linked to the invention and development of the telephone.
Signaling System No. 7 (SS7) is a set of telephony signaling protocols developed in 1975, which is used to set up and tear down telephone calls in most parts of the world-wide public switched telephone network (PSTN). The protocol also performs number translation, local number portability, prepaid billing, Short Message Service (SMS), and other services.
In the seven-layer OSI model of computer networking, the session layer is layer 5.
In telecommunication, common-channel signaling (CCS), or common-channel interoffice signaling (CCIS), is the transmission of control information (signaling) via a separate channel than that used for the messages, The signaling channel usually controls multiple message channels.
The ISDN User Part or ISUP is part of Signaling System No. 7 (SS7), which is used to set up telephone calls in the public switched telephone network (PSTN). It is specified by the ITU-T as part of the Q.76x series.
INAP stands for Intelligent Network Application Protocol or Intelligent Network Application Part. It is the signalling protocol used in Intelligent Networking (IN). It is part of the Signalling System No. 7 (SS7) protocol suite, typically layered on top of the Transaction Capabilities Application Part (TCAP). It can also be termed as logic for controlling telecommunication services migrated from traditional switching points to computer based service independent platform.
A Session Border Controller (SBC) is a network element deployed to protect SIP based Voice over Internet Protocol (VoIP) networks.
A service control point (SCP) is a standard component of the Intelligent Network (IN) telephone system which is used to control the service. Standard SCPs in the telecom industry today are deployed using SS7, SIGTRAN or SIP technologies. The SCP queries the service data point (SDP) which holds the actual database and directory. SCP, using the database from the SDP, identifies the geographical number to which the call is to be routed. This is the same mechanism that is used to route 800 numbers.
ITU-T Recommendation Q.931 is the ITU standard ISDN connection control signalling protocol, forming part of Digital Subscriber Signalling System No. 1. Unlike connectionless systems like UDP, ISDN is connection oriented and uses explicit signalling to manage call state: Q.931. Q.931 typically does not carry user data. Q.931 does not have a direct equivalent in the Internet Protocol stack, but can be compared to SIP. Q.931 does not provide flow control or perform retransmission, since the underlying layers are assumed to be reliable and the circuit-oriented nature of ISDN allocates bandwidth in fixed increments of 64 kbit/s. Amongst other things, Q.931 manages connection setup and breakdown. Like TCP, Q.931 documents both the protocol itself and a protocol state machine.
Polling, or polled operation, in computer science, refers to actively sampling the status of an external device by a client program as a synchronous activity. Polling is most often used in terms of input/output, and is also referred to as polled I/O or software-driven I/O.
A Signal Transfer Point (STP) is a router that relays SS7 messages between signaling end-points (SEPs) and other signaling transfer points (STPs). Typical SEPs include service switching points (SSPs) and service control points (SCPs). The STP is connected to adjacent SEPs and STPs via signaling links. Based on the address fields of the SS7 messages, the STP routes the messages to the appropriate outgoing signaling link. Edge STPs can also route based upon message body content using deep packet inspection techniques, and can provide address translations and screen content to limit the transfer of messages with dubious content or sent from unreliable sources. To meet stringent reliability requirements, STPs are typically provisioned in mated pairs.
FreeSWITCH is a free and open-source application server for real-time communication, WebRTC, telecommunications, video and Voice over Internet Protocol (VoIP). Multiplatform, it runs on Linux, Windows, macOS and FreeBSD. It is used to build PBX systems, IVR services, videoconferencing with chat and screen sharing, wholesale least-cost routing, Session Border Controller (SBC) and embedded communication appliances. It has full support for encryption, ZRTP, DTLS, SIPS. It can act as a gateway between PSTN, SIP, WebRTC, and many other communication protocols. Its core library, libfreeswitch, can be embedded into other projects. It is licensed under the Mozilla Public License (MPL), a free software license.
The Short Message Service is realised by the use of the Mobile Application Part (MAP) of the SS7 protocol, with Short Message protocol elements being transported across the network as fields within the MAP messages. These MAP messages may be transported using "traditional" TDM based signalling, or over IP using SIGTRAN and an appropriate adaptation layer.
Video Share is an IP Multimedia System (IMS) enabled service for mobile networks that allows users engaged in a circuit switch voice call to add a unidirectional video streaming session over the packet network during the voice call. Any of the parties on the voice call can initiate a video streaming session. There can be multiple video streaming sessions during a voice call, and each of these streaming sessions can be initiated by any of the parties on the voice call. The video source can either be the camera on the phone or a pre-recorded video clip.
Argela is a Turkish-based multinational corporation that designs and sells networking, voice, and communications technology and services. Founded in 2004, acquired by Turk Telekom in 2007, and headquartered in Istanbul, Argela has branches in Sunnyvale and Ankara.