This article contains too many or overly lengthy quotations for an encyclopedic entry.(January 2017)
This article has an unclear citation style.(December 2020)
A junk is a type of Chinese sailing ship with fully battened sails. There are two types of junk in China: Northern junk, which developed from Chinese river boats, 20 and southern junk, which developed from Austronesian ship designs, which have been trading with the Eastern Han dynasty since the 2nd century AD. :12–13 They continued to evolve in later dynasties, and were predominantly used by Chinese traders throughout Southeast Asia. They were found, and in lesser numbers are still found, throughout Southeast Asia and India, but primarily in China. Found more broadly today is a growing number of modern recreational junk-rigged sailboats. Chinese junks referred to many types of coastal or river ships. They were usually cargo ships, pleasure boats, or houseboats. Historically they have ranged in size from small river and coastal vessels to large ocean going ships, and there are significant regional variations in the type of rig, however they all employ fully battened sails.:
The term "junk" (Portuguese junco; Dutch jonk; and Spanish junco)was also used in the colonial period to refer to any large to medium-sized ships of the Austronesian cultures in Island Southeast Asia, with or without the junk rig. Examples include the Indonesian and Malaysian jong , the Philippine lanong , and the Maluku kora kora .
Views diverge on whether the origin of the word is from a dialect of Chinese or from a Javanese word. The term may stem from the Chinese chuán (船, "boat; ship") — also based on and pronounced as [dzuːŋ] (Pe̍h-ōe-jī :chûn) in Minnan Chinese — or zhōu (舟), the old word for a sailing vessel.[ citation needed ] The modern Mandarin Chinese word for an ocean-going wooden cargo vessel is cáo (艚).
Pierre-Yves Manguin and Zoetmulder, amongst others, point to an Old Javanese origin, in the form of jong. The word can be traced from an Old Javanese inscription in the 9th century. 748 It entered the Malay and Chinese languages by the 15th century, when a Chinese word list identifies it as a Malay word for ship. The Malay Maritime Code, first drawn up in the late 15th century, uses jong frequently as the word for freight ships. :60 European writings from 1345 through 1601 use a variety of related terms, including jonque (French), ioncque, ionct, giunchi, zonchi (Italian), iuncque, joanga, juanga (Spanish), junco (Portuguese), and ionco, djonk, jonk (Dutch). :299 :60 These terms commonly used to describe all kinds of large ships encountered in the Southeast Asia, as well as Chinese ships. :19:
The origin of the word "junk" in the English language can be traced to the Portuguese word junco, which is rendered from the Arabic word j-n-k (جنك). This word comes from the fact that the Arabic script cannot represent the sound spelled with the digraph "ng". 37 The word was used to denote both the Javanese/Malay ship (jong or djong) and the Chinese ship (chuán), even though the two were markedly different vessels. After the disappearance of jongs in the 17th century, the meaning of "junk" (and other similar words in European languages), which until then was used as a transcription of the word "jong" in Malay and Javanese, changed its meaning to exclusively refer to the Chinese ship (chuán). :204 :222:
This section needs additional citations for verification .(November 2016)
The historian Herbert Warington Smyth considered the junk as one of the most efficient ship designs, stating that "As an engine for carrying man and his commerce upon the high and stormy seas as well as on the vast inland waterways, it is doubtful if any class of vessel… is more suited or better adapted to its purpose than the Chinese or Indian junk, and it is certain that for flatness of sail and handiness, the Chinese rig is unsurpassed".
The sail of Chinese junks is an adoption of the Malay junk sail, which used vegetable matting attached to bamboo battens, a practice originated from Indonesia. 191–192 :12–13 The full-length battens keep the sail flatter than ideal in all wind conditions. Consequently, their ability to sail close to the wind is poorer than other fore-and-aft rigs.:
Classic junks were built of softwoods (although after the 17th century teak was used in Guangdong) with the outside shape built first. Then multiple internal compartment/bulkheads accessed by separate hatches and ladders, reminiscent of the interior structure of bamboo, were built in. Traditionally, the hull has a horseshoe-shaped stern supporting a high poop deck. The bottom is flat in a river junk with no keel (similar to a sampan), so that the boat relies on a daggerboard, 120 metres (390 ft) in length. This conjecture was based on the size of a rudder post that was found and misinterpreted, using formulae applicable to modern engine powered ships. More careful analysis shows that the rudder post that was found is actually smaller than the rudder post shown for a 70' long Pechili Trader in Worcester's "Junks and Sampans of the Yangtze".[ citation needed ]leeboard or very large rudder to prevent the boat from slipping sideways in the water. Ocean-going junks have a curved hull in section with a large amount of tumblehome in the topsides. The planking is edge nailed on a diagonal. Iron nails or spikes have been recovered from a Canton dig dated to circa 221 BC. For caulking the Chinese used a mix of ground lime with Tung oil together with chopped hemp from old fishing nets which set hard in 18 hours, but usefully remained flexible. Junks have narrow waterlines which accounts for their potential speed in moderate conditions, although such voyage data as we have indicates that average speeds on voyage for junks were little different from average voyage speeds of almost all traditional sail, i.e. around 4–6 knots. The largest junks, the treasure ships commanded by Ming dynasty Admiral Zheng He, were built for world exploration in the 15th century, and according to some interpretations may have been over
Another characteristic of junks, interior compartments or bulkheads, strengthened the ship and slowed flooding in case of holing. Ships built in this manner were written of in Zhu Yu's book Pingzhou Table Talks, published by 1119 during the Song dynasty. [ citation needed ]Again, this type of construction for Chinese ship hulls was attested to by the Moroccan Muslim Berber traveler Ibn Battuta (1304–1377 AD), who described it in great detail (refer to Technology of the Song dynasty). Although some historians have questioned whether the compartments were watertight, most believe that watertight compartments did exist in Chinese junks because although most of the time there were small passageways (known as limber holes) between compartments, these could be blocked with stoppers and such stoppers have been identified in wrecks. All wrecks discovered so far have limber holes; these are different from the free flooding holes that are located only in the foremost and aftermost compartments, but are at the base of the transverse bulkheads allowing water in each compartment to drain to the lowest compartment, thus facilitating pumping. It is believed from evidence in wrecks that the limber holes could be stopped either to allow the carriage of liquid cargoes or to isolate a compartment that had sprung a leak.
Benjamin Franklin wrote in a 1787 letter on the project of mail packets between the United States and France:
As these vessels are not to be laden with goods, their holds may without inconvenience be divided into separate apartments, after the Chinese manner, and each of these apartments caulked tight so as to keep out water.
In 1795, Sir Samuel Bentham, inspector of dockyards of the Royal Navy, and designer of six new sailing ships, argued for the adoption of "partitions contributing to strength, and securing the ship against foundering, as practiced by the Chinese of the present day". His idea was not adopted. Bentham had been in China in 1782, and he acknowledged that he had got the idea of watertight compartments by looking at Chinese junks there. Bentham was a friend of Isambard Brunel, so it is possible that he had some influence on Brunel's adoption of longitudinal strengthening bulkheads in the lower deck of the SS Great Britain. Bentham had already by this time designed and had built a segmented barge for use on the Volga River, so the idea of transverse hull separation was evidently in his mind. Perhaps more to the point, there is a very large difference between the transverse bulkheads in Chinese construction, which offer no longitudinal strengthening, and the longitudinal members which Brunel adopted, almost certainly inspired by the iron bridge and boiler engineering in which he and his contemporaries in iron shipbuilding innovation were most versed.[ citation needed ]
Due to the numerous foreign primary sources that hint to the existence of true watertight compartments in junks, historians such as Joseph Needham proposed that the limber holes were stopped up as noted above in case of leakage. He addresses the quite separate issue of free-flooding compartments on pg 422 of Science and Civilisation in Ancient China:
Less well known is the interesting fact that in some types of Chinese craft the foremost (and less frequently also the aftermost) compartment is made free-flooding. Holes are purposely contrived in the planking. This is the case with the salt-boats which shoot the rapids down from Tzuliuching in Szechuan, the gondola-shaped boats of the Poyang Lake, and many sea going junks. The Szechuanese boatmen say that this reduces resistance to the water to a minimum, though such a claim makes absolutely no hydrodynamic sense, and the device is thought to cushion the shocks of pounding when the boat pitches heavily in the rapids, as it acquires and discharges water ballast rapidly supposedly just at the time when it is most desirable to counteract buffeting at stem and stern. As with too many such claims, there has been no empirical testing of them and it seems unlikely that the claims would stand up to such testing since the diameter or number of holes needed for such rapid flooding and discharging would be so great as to significantly weaken the vulnerable fore and aft parts of the vessel. The sailors say, as sailors all over the world are inclined to do when conjuring up answers to landlubbers' questions, that it stops junks flying up into the wind. It may be the reality at the bottom of the following story, related by Liu Ching-Shu of the +5th century, in his book I Yuan (Garden of Strange Things)
In Fu-Nan (Cambodia) gold is always used in transactions. Once there were (some people who) having hired a boat to go from east to west near and far, had not reached their destination when the time came for the payment of the pound (of gold) which had been agreed upon. They therefore wished to reduce the quantity (to be paid). The master of the ship then played a trick upon them. He made (as it were) a way for the water to enter the bottom of the boat, which seemed to be about to sink, and remained stationary, moving neither forward nor backward. All the passengers were very frightened and came to make offerings. The boat (afterwards) returned to its original state.
This, however, would seem to have involved openings which could be controlled, and the water pumped out afterwards. This was easily effected in China (still seen in Kuangtung and Hong Kong), but the practice was also known in England, where the compartment was called the 'wet-well', and the boat in which it was built, a 'well-smack'. If the tradition is right that such boats date in Europe from +1712 then it may well be that the Chinese bulkhead principle was introduced twice, first for small coastal fishing boats at the end of the seventeenth century, and then for large ships a century later. However, the wet well is probably a case of parallel invention since its manner of construction is quite different from that of Chinese junks, the wet well quite often not running the full width of the boat, but only occupying the central part of the hull either side of the keel.
More to the pointwet wells were apparent in Roman small craft of the 5th century CE.
Leeboards and centerboards, used to stabilize the junk and to improve its capability to sail upwind, are documented from a 759 AD book by Li Chuan. The innovation was adopted by Portuguese and Dutch ships around 1570.[ citation needed ] Junks often employ a daggerboard that is forward on the hull which allows the center section of the hull to be free of the daggerboard trunk allowing larger cargo compartments. Because the daggerboard is located so far forward, the junk must use a balanced rudder to counteract the imbalance of lateral resistance.[ citation needed ]
Other innovations included the square-pallet bilge pump, which was adopted by the West during the 16th century for work ashore, the western chain pump, which was adopted for shipboard use, being of a different derivation. Junks also relied on the compass for navigational purposes. However, as with almost all vessels of any culture before the late 19th century, the accuracy of magnetic compasses aboard ship, whether from a failure to understand deviation (the magnetism of the ship's iron fastenings) or poor design of the compass card (the standard drypoint compasses were extremely unstable), meant that they did little to contribute to the accuracy of navigation by dead reckoning. Indeed, a review of the evidence shows that the Chinese embarked magnetic pointer was probably little used for navigation. The reasoning is simple. Chinese mariners were as able as any and, had they needed a compass to navigate, they would have been aware of the almost random directional qualities when used at sea of the water bowl compass they used. Yet that design remained unchanged for some half a millennium. Western sailors, coming upon a similar water bowl design (no evidence as to how has yet emerged) very rapidly adapted it in a series of significant changes such that within roughly a century the water bowl had given way to the dry pivot, a rotating compass card a century later, a lubberline a generation later and gimbals seventy or eighty years after that. These were necessary because in the more adverse climatic context of north western Europe, the compass was needed for navigation. Had similar needs been felt in China, Chinese mariners would also have come up with fixes. They didn't.
Junks employed stern-mounted rudders centuries before their adoption in the West for the simple reason that Western hull forms, with their pointed sterns, obviated a centreline steering system until technical developments in Scandinavia created the first, iron mounted, pintle and gudgeon 'barn door' western examples in the early 12th century CE. A second reason for this slow development was that the side rudders in use were, contrary to a lot of very ill-informed opinion, extremely efficient. [ citation needed ]Thus the junk rudder's origin, form and construction was completely different in that it was the development of a centrally mounted stern steering oar, examples of which can also be seen in Middle Kingdom (c.2050–1800 BCE) Egyptian river vessels. It was an innovation which permitted the steering of large ships and due to its design allowed height adjustment according to the depth of the water and to avoid serious damage should the junk ground. A sizable junk can have a rudder that needed up to twenty members of the crew to control in strong weather. In addition to using the sail plan to balance the junk and take the strain off the hard to operate and mechanically weakly attached rudder, some junks were also equipped with leeboards or dagger boards. The world's oldest known depiction of a stern-mounted rudder can be seen on a pottery model of a junk dating from before the 1st century AD, though some scholars think this may be a steering oar; a possible interpretation given is that the model is of a river boat that was probably towed or poled.
From sometime in the 13th to 15th centuries, many junks began incorporating "fenestrated" rudders (rudders with large diamond-shaped holes in them), probably adopted to lessen the force needed to direct the steering of the rudder.[ citation needed ]
The rudder is reported to be the strongest part of the junk. In the Tiangong Kaiwu "Exploitation of the Works of Nature" (1637), Song Yingxing wrote, "The rudder-post is made of elm, or else of langmu or of zhumu." The Ming author also applauds the strength of the langmu wood as "if one could use a single silk thread to hoist a thousand jun or sustain the weight of a mountain landslide."[ citation needed ]
Chinese ships were essentially fluvial before the Song dynasty. 20 However, large Austronesian trading ships docking in Chinese seaports with as many as four sails were recorded by scholars as early as the Han Dynasty (206 BCE – 220 CE). They called them the kunlun bo or kunlun po (崑崙舶, lit. "ship of the [dark-skinned] Kunlun people"). They were booked by Chinese Buddhist pilgrims for passage to Southern India and Sri Lanka. :34–36:
The 3rd century book "Strange Things of the South" (南州異物志) by Wan Chen (萬震) describes one of these Austronesian ships as being capable of 600-700 people together with more than 10,000 hu (斛) of cargo (250-1000 tons according to various interpretations - 600 tons deadweight according to Manguin). 262 The ships could be more than 50 meters in length and had a freeboard of 5.2–7.8 meters. When seen from above they resemble covered galleries. :347 He explains the ships' sail design as follows::
The people beyond the barriers, according the size of their ships, sometimes rig (as many as) four sails which they carry in row from bow to stern. (...) The four sails do not face directly forward, but are set obliquely, and so arranged that they can all be fixed in the same direction, to receive the wind and to spill it. Those sails which are behind the most windward one receiving the pressure of the wind, throw it from one to the other, so that they all profit from its force. If it is violent, (the sailors) diminish or augment the surface of the sails according to the conditions. This oblique rig, which permits the sails to receive from one another the breath of the wind, obviates the anxiety attendant upon having high masts. Thus these ships sail without avoiding strong winds and dashing waves, by the aid of which they can make great speed.
A 260 CE book by K'ang T'ai (康泰) described ships with seven sails called po for transporting horses that could travel as far as Syria. He also made reference to monsoon trade between the islands (or archipelago), which took a month and a few days in a large po. 347:
Southern Chinese junks were based on keeled and multi-planked Austronesian jong (known as po by the Chinese, from Javanese or Malay perahu - large ship). 613 :193 Southern Chinese junks showed characteristics of Austronesian jong: V-shaped, double-ended hull with a keel, and using timbers of tropical origin. This is different from northern Chinese junks, which are developed from flat bottomed riverine boats. :20–21 The northern Chinese junks had flat bottoms, no keel, no frames (only water-tight bulkheads), transom stern and stem, and would have been built out of pine or fir wood, and would have its planks fastened with iron nails or clamps. :613:
The trading dynasty of the Song developed the first junks based on Southeast Asian ships. By this era they also have adopted the Malay junk sail. 12–13 The ships of the Song, both mercantile and military, became the backbone of the navy of the following Yuan dynasty. In particular the Mongol invasions of Japan (1274–84), as well as the Mongol invasion of Java (both failed), essentially relied on recently acquired Song naval capabilities. Worcester estimates that Yuan junks were 11 m (36 ft) in beam and over 30 m (100 ft) long. In general they had no keel, stempost, or sternpost. They did have centreboards, and watertight bulkhead to strengthen the hull, which added great weight. Further excavations showed that this type of vessel was common in the 13th century. :22 :102 By using the ratio between number of soldiers and ships in both invasions, it can be concluded that each ship may carry 20-70 men. [ page needed ]:
Yuan dynasty ships carry on the tradition of Song, the Yuan navy is essentially Song navy.Both Song and Yuan employed large trading junks. The large ships (up to 5,000 liao or 1520-1860 tons burden) would carry 500-600 men, and the second class (1,000-2,000 liao) would carry 200-300 men. Unlike Ming treasure ships, Song and Yuan great junks are propelled by oars, and have with them smaller junks, probably for maneuvering aids. The largest junks (5,000 liao) may have a hull length twice that of Quanzhou ship (1,000 liao), that is 68 m.
The enormous dimensions of the Chinese ships of the Medieval period are described in Chinese sources, and are confirmed by Western travelers to the East, such as Marco Polo, Ibn Battuta and Niccolò da Conti. According to Ibn Battuta, who visited China in 1347:
…We stopped in the port of Calicut, in which there were at the time thirteen Chinese vessels, and disembarked. On the China Sea traveling is done in Chinese ships only, so we shall describe their arrangements. The Chinese vessels are of three kinds; large ships called chunks (junks), middle sized ones called zaws (dhows) and the small ones kakams. The large ships have anything from twelve down to three sails, which are made of bamboo rods plaited into mats. They are never lowered, but turned according to the direction of the wind; at anchor they are left floating in the wind. A ship carries a complement of a thousand men, six hundred of whom are sailors and four hundred men-at-arms, including archers, men with shields and crossbows, who throw naphtha. Three smaller ones, the "half", the "third" and the "quarter", accompany each large vessel. These vessels are built in the towns of Zaytun (a.k.a. Zaitun; today's Quanzhou; 刺桐) and Sin-Kalan. The vessel has four decks and contains rooms, cabins, and saloons for merchants; a cabin has chambers and a lavatory, and can be locked by its occupants. This is the manner after which they are made; two (parallel) walls of very thick wooden (planking) are raised and across the space between them are placed very thick planks (the bulkheads) secured longitudinally and transversely by means of large nails, each three ells in length. When these walls have thus been built the lower deck is fitted in and the ship is launched before the upper works are finished.- Ibn Battuta
The largest junks ever built were possibly those of Admiral Zheng He, for his expeditions in the Indian Ocean (1405 to 1433), although this is disputed as no contemporary records of the sizes of Zheng He's ships are known. Instead the dimensions are based on Sanbao Taijian Xia Xiyang Ji Tongsu Yanyi (1597), a romanticized version of the voyages written by Luo Maodengnearly two centuries later. Maodeng's novel describes Zheng He's ships as follows:
Louise Levathes suggests that the actual length of the biggest treasure ships may have been between 390–408 feet (119–124 m) long and 160–166 feet (49–51 m) wide. Modern scholars have argued on engineering grounds that it is highly unlikely that Zheng He's ship was 450 ft in length, :1–4, 38 Guan Jincheng (1947) proposed a much more modest size of 20 zhang long by 2.4 zhang wide (204 ft by 25.5 ft or 62.2 m by 7.8 m) while Xin Yuan'ou (2002) put them as 61–76 m (200–250 feet) in length.
From the mid-15th to early 16th century, all Chinese maritime trading was banned under the Ming Dynasty. The shipping and shipbuilding knowledge acquired during the Song and Yuan dynasties gradually declined during this period.
In 1661, a naval fleet of 400 junks and 25,000 men led by the Ming loyalist Zheng Chenggong (Cheng Ch'eng-kung in Wade–Giles, known in the West as Koxinga), arrived in Taiwan to oust the Dutch from Zeelandia. Following a nine-month siege, Cheng captured the Dutch fortress Fort Zeelandia. A peace treaty between Koxinga and the Dutch Government was signed at Castle Zeelandia on February 1, 1662, and Taiwan became Koxinga's base for the Kingdom of Tungning.
Javanese junks differed from Chinese junks in several respects. The Javanese junk was made of very thick wood, and as the ship got old, it was fixed with new boards, with four closing boards, stacked together. The rope and the sail was made with woven rattan. 191–192 The jong was made using jaty/jati wood (teak) at the time of this report (1515), at that time Chinese junks are using softwood as the main material. :145 The jong's hull is formed by joining planks to the keel and then to each other by wooden dowels, without using either a frame (except for subsequent reinforcement), nor any iron bolts or nails. The planks are perforated by an auger and inserted with dowels, which remains inside the fastened planks, not seen from the outside. :268 On some of the smaller vessels parts may be lashed together with vegetable fibers. :13 The vessel was similarly pointed at both ends, and carried two oar-like rudders and lateen-rigged sails (actually tanja sail), but it may also use junk sail, :37 a sail of Indonesian origin. :191–192 It differed markedly from the Chinese vessel, which had its hull fastened by strakes and iron nails to a frame and to structurally essential bulkheads which divided the cargo space. The Chinese vessel had a single rudder on a transom stern, and (except in Fujian and Guangdong) they had flat bottoms without keels. :58:
Encounters with giant jongs were recorded by Western travelers. Florentine merchant Giovanni da Empoli (1483-1517), one of the first Italian agents to join a Portuguese armada to India in 1503-1504, 58 Portuguese recorded at least two encounters with large Djongs, one was encountered off the coast of Pacem (Samudera Pasai Sultanate) and the other was owned by Pati Unus, who went on to attack Malacca in 1513. :62–64 Characteristics of the 2 ships were similar, both were larger than Portuguese ship, built with multiple plankings, resistant to cannon fire, and had two oar-like rudders on the side of the ship. At least Pati Unus' jong was equipped with three layers of sheathing which the Portuguese said over one cruzado in thickness each. :151–152 The Chinese banned foreign ships from entering Guangzhou, fearing the Javanese or Malay junks would attack and capture the city, because it is said that one of these junk would rout twenty Chinese junks. :122–123said that the junks of Java were no different in their strength than a castle, because the three and four boards, layered one above the other, could not be harmed with artillery. They sailed with their women, children, and families, with everyone mainly keeping to their respective rooms. :
Main production location of Djong was mainly constructed in two major shipbuilding centres around Java: north coastal Java, especially around Rembang-Demak (along the Muria strait) and Cirebon; and the south coast of Borneo (Banjarmasin) and adjacent islands. A common feature of these places was their accessibility to forests of teak, this wood was highly valued because of its resistance to shipworm, whereas Borneo itself would supply ironwood. 33 Pegu, which is a large shipbuilding port at the 16th century, also produced jong, built by Javanese who resided there.:
Niccolò da Conti in relating his travels in Asia between 1419 and 1444, describes huge junks of about 2,000 tons in weight:
They build some ships much larger than ours, capable of containing 2,000 tons in size, with five sails and as many masts. The lower part is constructed with of three planks, in order to withstand the force of the tempest to which they are much exposed. But some ships are built in compartments, that should one part is shattered, the other portion remaining intact to accomplish the voyage.
Also, in 1456, the Fra Mauro map described the presence of junks in the Indian Ocean as well as their construction:
The ships called junks (lit. "Zonchi") that navigate these seas carry four masts or more, some of which can be raised or lowered, and have 40 to 60 cabins for the merchants and only one tiller. They can navigate without a compass, because they have an astrologer, who stands on the side and, with an astrolabe in hand, gives orders to the navigator.
Fra Mauro further explains that one of these junks rounded the Cape of Good Hope and travelled far into the Atlantic Ocean, in 1420:
About the year of Our Lord 1420 a ship, what is called an Indian Zoncho, on a crossing of the Sea of India towards the "Isle of Men and Women", was diverted beyond the "Cape of Diab" (Shown as the Cape of Good Hope on the map), through the "Green Isles" (lit. "isole uerde", Cabo Verde Islands), out into the "Sea of Darkness" (Atlantic Ocean) on a way west and southwest. Nothing but air and water was seen for 40 days and by their reckoning they ran 2,000 miles and fortune deserted them. When the stress of the weather had subsided they made the return to the said "Cape of Diab" in 70 days and drawing near to the shore to supply their wants the sailors saw the egg of a bird called roc, which egg is as big as an amphora.
Chinese junks were used extensively in Asian trade during the 16th and 17th century, especially to Southeast Asia and to Japan, where they competed with Japanese Red Seal Ships, Portuguese carracks and Dutch galleons. Richard Cocks, the head of the English trading factory in Hirado, Japan, recorded that 50 to 60 Chinese junks visited Nagasaki in 1612 alone.[ citation needed ]
These junks were usually three masted, and averaging between 200 and 800 tons in size, the largest ones having around 130 sailors, 130 traders and sometimes hundreds of passengers.[ citation needed ]
Large, ocean-going junks played a key role in Asian trade until the 19th century. One of these junks, Keying , sailed from China around the Cape of Good Hope to the United States and England between 1846 and 1848. Many junks were fitted out with carronades and other weapons for naval or piratical uses. These vessels were typically called "war junks" or "armed junks" by Western navies which began entering the region more frequently in the 18th century. The British, Americans and French fought several naval battles with war junks in the 19th century, during the First Opium War, Second Opium War and in between.
At sea, junk sailors co-operated with their Western counterparts. For example, in 1870 survivors of the English barque Humberstone shipwrecked off Formosa, were rescued by a junk and landed safely in Macao.
In 1938, E. Allen Petersen escaped the advancing Japanese armies by sailing a 36-foot (11 m) junk, Hummel Hummel, from Shanghai to California with his wife Tani and two White Russians (Tsar loyalists). In 1939, Richard Halliburton was lost at sea with his crew while sailing a specially constructed junk, Sea Dragon, from Hong Kong to the World Exposition in San Francisco.[ citation needed ]
In 1955, six young men sailed a Ming dynasty-style junk from Taiwan to San Francisco. The four-month journey aboard the Free China was captured on film and their arrival into San Francisco made international front-page news. The five Chinese-born friends saw an advertisement for an international trans-Atlantic yacht race, and jumped at the opportunity for adventure. They were joined by the then US Vice-Consul to China, who was tasked with capturing the journey on film. Enduring typhoons and mishaps, the crew, having never sailed a century-old junk before, learned along the way. The crew included Reno Chen, Paul Chow, Loo-chi Hu, Benny Hsu, Calvin Mehlert and were led by skipper Marco Chung. After a journey of 6,000 miles (9,700 km), the Free China and her crew arrived in San Francisco Bay in fog on August 8, 1955. Shortly afterward the footage was featured on ABC television's Bold Journey travelogue. Hosted by John Stephenson and narrated by ship's navigator Paul Chow, the program highlighted the adventures and challenges of the junk's sailing across the Pacific, as well as some humorous moments aboard ship.
In 1959 a group of Catalan men, led by Jose Maria Tey, sailed from Hong Kong to Barcelona on a junk named Rubia. After their successful journey this junk was anchored as a tourist attraction at one end of Barcelona harbor, close to where La Rambla meets the sea. Permanently moored along with it was a reproduction of Columbus' caravel Santa Maria during the 1960s and part of the 1970s.
In 1981, Christoph Swoboda had a 65 feet (LoA) Bedar built by the boatyard of Che Ali bin Ngah on Duyong island in the estuary of the Terengganu river on the East coast of Malaysia. The Bedar is one of the two types of Malay junk schooners traditionally built there. He sailed this junk with his family and one friend to the Mediterranean and then continued with changing crew to finally finish a circumnavigation in 1998. He sold this vessel in 2000 and in 2004 he started to build a new junk in Duyong with the same craftsmen: the Pinas (or Pinis) Naga Pelangi, in order to help keep this ancient boat building tradition alive. This boat finished to be fitted out in 2010 and is working as a charter boat in the Andaman and the South China Sea.
A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships carry square sails on each mast—the brig and full-rigged ship, said to be "ship-rigged" when there are three or more masts. Others carry only fore-and-aft sails on each mast—schooners. Still others employ a combination of square and fore-and aft sails, including the barque, barquentine, and brigantine.
Shipbuilding is the construction of ships and other floating vessels. It normally takes place in a specialized facility known as a shipyard. Shipbuilders, also called shipwrights, follow a specialized occupation that traces its roots to before recorded history.
A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other conveyance that moves through a fluid medium. On an aircraft the rudder is used primarily to counter adverse yaw and p-factor and is not the primary control used to turn the airplane. A rudder operates by redirecting the fluid past the hull (watercraft) or fuselage, thus imparting a turning or yawing motion to the craft. In basic form, a rudder is a flat plane or sheet of material attached with hinges to the craft's stern, tail, or after end. Often rudders are shaped so as to minimize hydrodynamic or aerodynamic drag. On simple watercraft, a tiller—essentially, a stick or pole acting as a lever arm—may be attached to the top of the rudder to allow it to be turned by a helmsman. In larger vessels, cables, pushrods, or hydraulics may be used to link rudders to steering wheels. In typical aircraft, the rudder is operated by pedals via mechanical linkages or hydraulics.
The koch was a special type of small one or two mast wooden sailing ships designed and used in Russia for transpolar voyages in ice conditions of the Arctic seas, popular among the Pomors.
Floodability is the susceptibility of a ship's construction to flooding. It also refers to the ability to intentionally flood certain areas of the hull for damage control purposes, or to increase stability, which is particularly important in combat vessels, which often face the possibility of serious hull breach due to enemy action, and which rely on well-trained damage controlmen to equalize and then stop flooding of the hull.
A Chinese treasure ship is a type of large wooden ship in the fleet of admiral Zheng He, who led seven voyages during the early 15th-century Ming dynasty.
The junk rig, also known as the Chinese lugsail or sampan rig, is a type of sail rig in which rigid members, called battens, span the full width of the sail and extend the sail forward of the mast.
Maritime history dates back thousands of years. In ancient maritime history, evidence of maritime trade between civilizations dates back at least two millennia. The first prehistoric boats are presumed to have been dugout canoes which were developed independently by various stone age populations. In ancient history, various vessels were used for coastal fishing and travel. A mesolithic boatyard has been found from the Isle of Wight in Britain
Tongkang or "Tong'kang" refers to several type of boats used to carry goods along rivers and shoreline in Maritime Southeast Asia. One of the earliest record of tongkang comes from 15th century Malay Annals. One passage mentioned it as being used by Majapahit empire during the 1350 attack on Singapura.
The pinas, sometimes called "pinis" as well, is one of two types of junk rigged schooners of the east coast of the Malay peninsula, built in the Terengganu area. This kind of vessel was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as one of the two types of traditional sailing vessels the late Malay maritime culture has developed: The bedar and the pinas.
The term bedar,, is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas. These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels - anak bedar and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.
A Lancaran is a type of sailing ship used in the Maritime Southeast Asia. Although similar in shape to Mediterranean galleys, lancaran was the backbone of the regional fleet before Mediterranean influence came.
The djong, jong, or jung is a type of ancient sailing ship originating from Java that was widely used by Javanese and Malay sailors. The word was and is spelled jong in its languages of origin, the "djong" spelling being the colonial Dutch romanisation.
Pencalang is a traditional merchant ship from Nusantara. Historically it was called as pantchiallang or pantjalang. It was originally built by Malay people from the area of Riau and the Malay Peninsula, but has been copied by Javanese shipwrights. By the end of the 17th century this ship has been built by Javanese and Chinese shipbuilders in and around Rembang. However it was a popular choice for Balinese skippers followed by Sulawesian skippers.
Perahu Mayang or simply mayang is a type of fishing boat from Java, Indonesia. This type of boat is used mainly for fishing and trading. Historically, this indigenous vessel is also favored by European skippers and private merchants for trading in East Indies: 50% of them were using mayang and pencalang. It is mostly used in northern coast of Java. The major production site is in Rembang, Central Java.
Benawa or banawa is a type of ship from Gowa, an old principality in the southwest corner of Sulawesi, Indonesia. The earliest record of this vessel is from Hikayat Banjar, which has been written gradually from 14th-17th century. In the present, the type is already extinct; pelari and paduwakan, vessels with similar hull, have taken its place.
Ghurab or gurab is a type of merchant and warship from Nusantara archipelago. The ship was a result of Mediterranean influences in the region, particularly introduced by the Arabs, Persians, and Ottoman.
Ghali, gali or gale are a type of galley-like ships from the Nusantara archipelago. Several native galley-like ships already existed in the archipelago, some with outriggers. The design of ghalis is the result of the impact made by Mediterranean shipbuilding techniques on native shipbuilding, introduced particularly by Arabs, Persians, Ottoman Turks, and Portuguese. The terms may also refer to Mediterranean vessels built by local people, or native vessels with Mediterranean influence.
Lancang is a type of sailing ship from Maritime Southeast Asia. It is used as warship, lighter, and as royal ship, particularly used by the people of Sumatran east coast, but can also be found in the coast of Kalimantan.
A juanga or joanga refers to large-sized kora-kora or karakoa. They are used in Southern Philippines and Eastern Indonesia, in Maluku smaller versions existed. They are propelled by oars but are not used for carrying cargo.
|Wikimedia Commons has media related to Junk (ship) .|