Asynchronous Transfer Mode (ATM) is, according to the ATM Forum, "a telecommunications concept defined by ANSI and ITU standards for carriage of a complete range of user traffic, including voice, data, and video signals". ATM was developed to meet the needs of the Broadband Integrated Services Digital Network, as defined in the late 1980s, and designed to integrate telecommunication networks. Additionally, It was designed for networks that must handle both traditional high-throughput data traffic, and real-time, low-latency content such as voice and video. The reference model for ATM approximately maps to the three lowest layers of the ISO-OSI reference model: network layer, data link layer, and physical layer. ATM is a core protocol used over the SONET/SDH backbone of the public switched telephone network (PSTN) and Integrated Services Digital Network (ISDN), but its use is declining in favour of all IP.
The Internet protocol suite is the conceptual model and set of communications protocols used in the Internet and similar computer networks. It is commonly known as TCP/IP because the foundational protocols in the suite are the Transmission Control Protocol (TCP) and the Internet Protocol (IP). It is occasionally known as the Department of Defense (DoD) model because the development of the networking method was funded by the United States Department of Defense through DARPA.
The Open Systems Interconnection model is a conceptual model that characterizes and standardizes the communication functions of a telecommunication or computing system without regard to its underlying internal structure and technology. Its goal is the interoperability of diverse communication systems with standard protocols. The model partitions a communication system into abstraction layers. The original version of the model defined seven layers.
A T-interface or T reference point is used for basic rate access in an Integrated Services Digital Network (ISDN) environment. It is a User–network interface reference point that is characterized by a four-wire, 144 kbit/s (2B+D) user rate.
X.25 is an ITU-T standard protocol suite for packet-switched wide area network (WAN) communication. An X.25 WAN consists of packet-switching exchange (PSE) nodes as the networking hardware, and leased lines, plain old telephone service connections, or ISDN connections as physical links.
V5 is a family of telephone network protocols defined by ETSI which allow communications between the telephone exchange, also known in the specifications as the local exchange (LE), and the local loop. With potentially thousands of subscribers connected to the LE there is the problem of physically managing thousands of wires out to the local subscribers. Prior to the specification of V5 the manufacturers of exchange equipment had proprietary solutions to the problem. These solutions did not inter-operate and meant being tied into a single manufacturer's method at each exchange.
Basic Rate InterfaceorBasic Rate Access is an Integrated Services Digital Network (ISDN) configuration intended primarily for use in subscriber lines similar to those that have long been used for voice-grade telephone service. As such, an ISDN BRI connection can use the existing telephone infrastructure at a business.
Signaling System No. 7 (SS7) is a set of telephony signaling protocols developed in 1975, which is used to set up and tear down telephone calls in most parts of the world-wide public switched telephone network (PSTN). The protocol also performs number translation, local number portability, prepaid billing, Short Message Service (SMS), and other services.
In IEEE 802 LAN/MAN standards, the medium access control (MAC) sublayer is the layer that controls the hardware responsible for interaction with the media.
Digital Subscriber Signalling System No. 1 (DSS1) is a digital signalling protocol used for the ISDN. It is defined by ITU-T I.411. It supports Bearer Capability, Low Level Compatibility and High Level Compatibility, ANI, DNIS and redirected number signaling in both directions. A standard developed by ETSI for Europe is known as Euro-ISDN or E-DSS1 or simply EDSS1.
The Message Transfer Part (MTP) is part of the Signaling System 7 (SS7) used for communication in Public Switched Telephone Networks. MTP is responsible for reliable, unduplicated and in-sequence transport of SS7 messages between communication partners.
SIGTRAN is the name, derived from signaling transport, of the former Internet Task Force (I) working group that produced specifications for a family of protocols that provide reliable datagram service and user layer adaptations for Signaling System and ISDN communications protocols. The SIGTRAN protocols are an extension of the SS7 protocol family. It supports the same application and call management paradigms as SS7 but uses an Internet Protocol (IP) transport called Stream Control Transmission Protocol (SCTP), instead of TCP or UDP. Indeed, the most significant protocol defined by the SIGTRAN group is SCTP, which is used to carry PSTN signaling over IP.
ITU-T Recommendation Q.931 is the ITU standard ISDN connection control signalling protocol, forming part of Digital Subscriber Signalling System No. 1. Unlike connectionless systems like UDP, ISDN is connection oriented and uses explicit signalling to manage call state: Q.931. Q.931 typically does not carry user data. Q.931 does not have a direct equivalent in the Internet Protocol stack, but can be compared to SIP. Q.931 does not provide flow control or perform retransmission, since the underlying layers are assumed to be reliable and the circuit-oriented nature of ISDN allocates bandwidth in fixed increments of 64 kbit/s. Amongst other things, Q.931 manages connection setup and breakdown. Like TCP, Q.931 documents both the protocol itself and a protocol state machine.
Packet Layer Protocol or PLP is the Network Layer protocol for the X.25 protocol suite. PLP manages the packet exchanges between DTE devices across VCs. PLP also can be used on ISDN using Link Access Procedures, D channel (LAPD).
In wide area network computing, Link Access Procedure for Frame Relay is part of the network's communications protocol which ensures that frames are error free and executed in the right sequence.
The Common ISDN Application Programming Interface is an ISDN-conformant standardized software interface. With the help of the CAPI-Interface computer software intended for the use with ISDN can be provided, without knowledge of the deployed, proprietary ISDN card.
LAPDm is a data link layer protocol used in GSM cellular networks. LAPDm forms Layer 2 of the Um interface between the Base Transceiver Station and Mobile station, which is to say that it is used in the radio link between the cellular network and the subscriber handset.
