Number Nine Visual Technology Corporation was a manufacturer of video graphics chips and cards from 1982 to 1999. Number Nine developed the first 128-bit graphics processor (the Imagine 128), as well as the first 256-color (8-bit) and 16.8million color (24-bit) cards.[1]
The name of the company, as well as many of its products (e.g., Revolution, Imagine, Pepper, Ticket to Ride) refer to Beatles songs. At system boot up, Number Nine cards' video BIOS splash screens display short phrases from Beatles songs related to the cards' model names. Card model names were usually preceded by a "#9" moniker.
History
Number Nine was founded in 1982 by Andrew Najda and Stan Bialek as Number Nine Computer Corporation. The company was renamed Number Nine Visual Technology Corporation in the early 1990s. For most of its existence, Number Nine was based in Lexington, Massachusetts. Number Nine initially made an Apple II accelerator board, then later moved into the design and manufacture of high-end PC graphics cards in 1983. Number Nine was one of the premier, higher-end graphics card companies into the early 1990s. In the mid to late 1990s, Number Nine began to lose market share to competitors in both the price and performance arenas. Number Nine was slow to respond to the boom in 3D graphics, continuing to emphasize high quality, fast 2D graphics.[citation needed] On December 20, 1999, Number Nine announced a "letter-of-intent" for S3 Inc. (later S3 Graphics Co.) to buy substantially all assets and intellectual property of Number Nine. By mid 2000, S3 had completed the acquisition of Number Nine's assets and Number Nine had ceased operations. In 2002 two former Number Nine engineers, James Macleod and Francis Bruno, formed Silicon Spectrum, Inc., and licensed Number Nine's graphics technology from S3 to implement in FPGA devices.[2][3][4][5]
For five years after Number Nine closed its doors, a former employee kept Number Nine's website up and running, with driver downloads and a forum available for self-help. A volunteer and #9 enthusiast provided regular, impromptu technical support on the forum for the last two and a half years the site was active. Several former employees checked in to help occasionally. The website finally went off the air for good in March 2005 and the domain name was taken over by an online gambling company.[citation needed]
In 2013, Francis Bruno from Silicon Spectrum tried to fund an open-source GPU based on a #9 Ticket To Ride IV derived design. Started on the crowdfunding platform kickstarter.com, the campaign was unsuccessful as only $13,000 of the requested $200,000 was gathered.[6][7] Despite this, source code was released under a GPL3 license in August 2014.[8]
The first Number Nine graphics cards were ISA bus, pre-VGA standard cards that had no graphics accelerator chips. In the latter 1980s to early 1990s, Number Nine made ISA and MCA bus graphics cards based on Texas Instruments' TIGA coprocessors.
Beginning in the 1990s, Number Nine made AGP and PCI graphics cards with their own proprietary graphics accelerators (the Imagine line GPUs). Contemporaneously, Number Nine made AGP, PCI, VLB and ISA graphics cards using S3 Graphics' accelerator chips. Their very last AGP card used an Nvidia GPU.
Early pre-VGA video cards
Early cards (no co-processor, pre-1986, pre-VGA standard):
The Revolution series were large, full-length cards that ranged in price from $1,995 to $3,995 at introduction.
TIGA cards
Number Nine graphics cards using Texas Instruments' TIGA co-processors were made from about 1986 to 1992. The Texas Instruments TMS-340x0 co-processors were coupled with custom Number Nine-designed application specific chips, which could only handle very primitive graphics functions such as clipping. Nevertheless, this was a major accomplishment. With the exception of the GXi Lite, all of the TIGA graphics cards were large, full length cards.
Cards using a TIGA co-processor were (in approximate order of introduction):
The TIGA-based cards were very expensive in their day, ranging in price from $995 to $2495 at introduction.
Number Nine Video Cards using Number Nine GPUs
Imagine 128 (early original version, note old company name)Imagine 128 Series IIRevolution 3D (Ticket to Ride), PCI busRevolution IV (Ticket to Ride 4), PCI bus
The Imagine series GPUs (also called graphics accelerators) were Number Nine's own in-house designs. The Imagine series went through four generations:
T2R (marked "Ticket to Ride"; sometimes marked "Imagine-3")
T2R4 (marked "Ticket to Ride IV").
The Imagine 128 GPU introduced a full 128-bit graphics processor—GPU, internal processor bus, and memory bus were all 128 bits. However, there was no, or very little, hardware support for 3D graphics operations.[15]
The Imagine 128-II added Gouraud shading, 32-bit Z-buffering, double display buffering, and a 256-bit video rendering engine.[16]
The Ticket to Ride (Imagine-3) supported WRAM and both the AGP and PCI buses, had a 3D floating point setup engine, bilinear filtering and perspective correction, Gouraud shading, alpha blending, interpolated fogging, specular lighting, double and triple display buffering, 16-, 24- and 32-bit Z-buffering, MPEG-1 and MPEG-2, and hardware MIP mapping.[17][18]
The Ticket to Ride IV included an integrated 250MHz RAMDAC, support for up to 32MiB SDRAM, full scene anti-aliasing, per pixel fog, specular, and alpha effects, 10-level detail per pixel MIP mapping, bilinear and trilinear filtering, 8 bits per texel, 8KB on-chip texture cache, hardware MPEG-1 and MPEG-2, and a full IEEE 754 floating point pipeline 3D rendering setup engine.[19][20]
Number Nine graphics accelerators were used on the following Number Nine model video cards:
#9 Model
#9 GPU
Memory
PC Bus Architecture
Imagine 128
Imagine 128
4 MB, 8 MB VRAM
PCI
Imagine 128 Series 2
Imagine 128-II
4 MB, 8M H-VRAM
PCI
Imagine 128 Series 2e
Imagine 128-II
4 MB EDO DRAM
PCI
Revolution 3D
T2R
4 MB or 8 MB (base), 12 MB, 16 MB WRAM
PCI, AGP
Revolution IV
T2R4
16 MB, 32 MB SDRAM
PCI, AGP
Revolution IV-FP
T2R4
32 MB SDRAM
PCI, AGP
These 1990s video cards were Number Nine's flagship cards of their day (the Imagine 128 and 128 Series 2 were very expensive). None required a heatsink on the GPU. The original Imagine 128 was introduced in 1994. The Revolution IV was introduced in 1998.
In addition to a standard analog VGA connector, the Revolution IV-FP (also called the Revolution IV-1600SW) had an OpenLDI digital interface connector for the Silicon Graphics, Inc (SGI) 1600SW digital flat panel monitor. The Revolution IV-FP was one of only a few standard video adapters with the OpenLDI interface for SGI's 1600SW digital flat panel monitor (some others were 3Dlabs Oxygen VX1-1600SW, I-O DATA GA-NF30/PCI, and Siemens Nixdorf S26361-D964 cards in some Siemens Nixdorf computer). SGI's 1600SW video adapters were proprietary (on board) to their O2, 320, and 540 graphics workstations. Formac made a limited number of PCI cards with OpenLDI for Apple Macs.
The OpenLDI interface is neither physically nor electrically compatible with the modern DVI-D interface. This was the early days of digital video connections and there were several competing, incompatible standards. OpenLDI for stand-alone displays disappeared, but several aftermarket manufacturers made adapters to convert OpenLDI to DVI-D so more modern video cards would work with the 1600SW monitor.
The 1600SW monitor was far ahead of its time and was eagerly sought long after it was out of production. For this reason, for a time, Revolution IV-FP and Oxygen VX1-1600SW video cards commanded a premium price in the used market, long after they were out of production.
Number Nine Video Cards using S3 Graphics processors
Number Nine had a close business relationship with S3 Graphics throughout the 1990s. While the Imagine series GPUs and cards were Number Nine's flagship products, contemporaneously, Number Nine produced a series of less expensive video graphics cards using S3's GPUs. The S3-based cards were usually introduced in groups of three, at three price points below the Imagine cards. They carried the same model name, but different model numbers and GPUs. Except for the SR9, Number Nine's last, best S3 card, none of these video cards had heatsinks on the graphics processing chip (GPU).
The S3-based video cards were, in approximate order of introduction:
SR9 SDRAM NLX 8MB (heatsink removed) with S3 Savage4 LT chipSR9 SGRAM 16MB DVI (heatsink removed) with S3 Savage4 Xtreme chip
Number Nine's last two graphics cards were the only ones to require heatsinks on the GPU. Both outperformed the Revolution IV.
The SR9 was Number Nine's last retail card. It used an S3 Savage4 GPU with a small heatsink on the GPU (the SDRAM one with VGA connector is Savage4 LT, the SGRAM one with DVI connector is Savage4 Xtreme).
An OEM-only AGP card using an Nvidia TNT2-M64 GPU and [16 MB? or] 32MB SDRAM. The heatsink is larger than the one on the SR9. This Nvidia-based card has been variously called (probably unofficially) the "M64" or "Pepper M32," but it was never a retail, end-user product.
PixelFusion joint venture
On April 20, 1999, Bankboston Business Credit announced it had provided $15Million for Number Nine Visual Technology.[22]
On August 9, 1999, PixelFusion Ltd. and Number Nine Visual Technology Corp. announced they had entered into a relationship whereby Number Nine would use PixelFusion's FUZION 150 chip to design a very high-end 3D graphics accelerator card for AGP Pro-equipped PCs. The card would use 128M to 1024M Rambus RDRAM, while the FUZION 150 chip would contain 24 megabits of embedded DRAM. The product was to be delivered in the first half of 2000.[23] However, no retail products were made following the announcement.
The GeForce 256 is the original release in Nvidia's "GeForce" product line. Announced on August 31, 1999 and released on October 11, 1999, the GeForce 256 improves on its predecessor by increasing the number of fixed pixel pipelines, offloading host geometry calculations to a hardware transform and lighting (T&L) engine, and adding hardware motion compensation for MPEG-2 video. It offered a notable leap in 3D PC gaming performance and was the first fully Direct3D 7-compliant 3D accelerator.
A graphics processing unit (GPU) is a specialized electronic circuit initially designed for digital image processing and to accelerate computer graphics, being present either as a discrete video card or embedded on motherboards, mobile phones, personal computers, workstations, and game consoles. After their initial design, GPUs were found to be useful for non-graphic calculations involving embarrassingly parallel problems due to their parallel structure. Other non-graphical uses include the training of neural networks and cryptocurrency mining.
3DLABS Inc. Ltd. was a fabless semiconductor company. It was founded by Yavuz Ahıska and Osman Kent in 1994 with headquarters in San Jose, California. It originally developed the GLINT and PERMEDIA high-end graphics chip technology that was used on many of the world's leading computer graphics cards in the CAD and DCC markets, including its own Wildcat and Oxygen cards.
The RIVA 128, or "NV3", was a consumer graphics processing unit created in 1997 by Nvidia. It was the first to integrate 3D acceleration in addition to traditional 2D and video acceleration. Its name is an acronym for Real-time Interactive Video and Animation accelerator.
The RIVA TNT, codenamed NV4, is a 2D, video, and 3D graphics accelerator chip for PCs that was developed by Nvidia and released in March 1998. It cemented Nvidia's reputation as a worthy rival within the developing consumer 3D graphics adapter industry. It succeeded the RIVA 128.
The RIVA TNT2 is a graphics processing unit manufactured by Nvidia starting in early 1999. The chip is codenamed "NV5" because it is the 5th graphics chip design by Nvidia, succeeding the RIVA TNT (NV4). RIVA is an acronym for Real-time Interactive Video and Animation accelerator. The "TNT" suffix refers to the chip's ability to work on two texels at once. Nvidia removed RIVA from the name later in the chip's lifetime.
The GeForce 6 series is the sixth generation of Nvidia's GeForce line of graphics processing units. Launched on April 14, 2004, the GeForce 6 family introduced PureVideo post-processing for video, SLI technology, and Shader Model 3.0 support.
The Voodoo 5 was the last and most powerful graphics card line that was released by 3dfx Interactive. All members of the family were based upon the VSA-100 graphics processor. Only the single-chip Voodoo 4 4500 and dual-chip Voodoo 5 5500 made it to market.
Savage was a product-line of PC graphics chipsets designed by S3.
Diamond Multimedia is an American company that specializes in many forms of multimedia technology. They have produced graphics cards, motherboards, modems, sound cards and MP3 players; however, the company began with the production of the TrackStar, an add-on card for IBM PC compatibles which emulates Apple II computers. They were one of the major players in the 2D and early 3D graphics card competition throughout the 1990s and early 2000s.
The Intel740, or i740, is a 350 nm graphics processing unit using an AGP interface released by Intel on February 12, 1998. Intel was hoping to use the i740 to popularize the Accelerated Graphics Port, while most graphics vendors were still using PCI. Released to enormous fanfare, the i740 proved to have disappointing real-world performance, and sank from view after only a few months on the market. Some of its technology lived on in the form of Intel Extreme Graphics, and the concept of an Intel produced graphics processor lives on in the form of Intel Graphics Technology and Intel Arc.
Rendition, Inc., was a maker of 3D computer graphics chipsets in the mid to late 1990s. They were known for products such as the Vérité 1000 and Vérité 2x00 and for being one of the first 3D chipset makers to directly work with Quake developer John Carmack to make a hardware-accelerated version of the game (vQuake). Rendition's major competitor at the time was 3Dfx. Their proprietary rendering APIs were Speedy3D and RRedline.
A video display controller (VDC), also called a display engine or display interface, is an integrated circuit which is the main component in a video-signal generator, a device responsible for the production of a TV video signal in a computing or game system. Some VDCs also generate an audio signal, but that is not their main function. VDCs were used in the home computers of the 1980s and also in some early video picture systems.
The R300 GPU, introduced in August 2002 and developed by ATI Technologies, is its third generation of GPU used in Radeon graphics cards. This GPU features 3D acceleration based upon Direct3D 9.0 and OpenGL 2.0, a major improvement in features and performance compared to the preceding R200 design. R300 was the first fully Direct3D 9-capable consumer graphics chip. The processors also include 2D GUI acceleration, video acceleration, and multiple display outputs.
The Radeon R100 is the first generation of Radeon graphics chips from ATI Technologies. The line features 3D acceleration based upon Direct3D 7.0 and OpenGL 1.3, and all but the entry-level versions offloading host geometry calculations to a hardware transform and lighting (T&L) engine, a major improvement in features and performance compared to the preceding Rage design. The processors also include 2D GUI acceleration, video acceleration, and multiple display outputs. "R100" refers to the development codename of the initially released GPU of the generation. It is the basis for a variety of other succeeding products.
The ATI Rage is a series of graphics chipsets developed by ATI Technologies offering graphical user interface (GUI) 2D acceleration, video acceleration, and 3D acceleration developed by ATI Technologies. It is the successor to the ATI Mach series of 2D accelerators.
The G200 is a 2D, 3D, and video accelerator chip for personal computers designed by Matrox. It was released in 1998.
S3 Graphics' Chrome series of graphics accelerators arrived in 2004 with the DeltaChrome line of chips. They were supplied as discrete, mobile, or integrated graphics.
Glaze3D was a family of graphics cards announced by BitBoys Oy on August 2, 1999, that would have produced substantially better performance than other consumer products available at the time. The family, which would have come in the Glaze3D 1200, Glaze3D 2400 and Glaze3D 4800 models, was supposed to offer full support for DirectX 7, OpenGL 1.2, AGP 4×, 4× anisotropic filtering, full-screen anti-aliasing and a host of other technologies not commonly seen at the time. The 1.5 million gate GPU would have been fabricated by Infineon on a 0.2 μm eDRAM process, later to be reduced to 0.17 μm with a minimum of 9 MB of embedded DRAM and 128 to 512 MB of external SDRAM. The maximum supported video resolution was 2048×1536 pixels.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
