Pizza box form factor

Last updated

Two SPARCstation 20 workstations stacked to show the front and back sides, a typical "pizza box" case SPARCstation20 front and rear.jpg
Two SPARCstation 20 workstations stacked to show the front and back sides, a typical "pizza box" case
An SGI Indy Silicon Graphics Indy.jpg
An SGI Indy

In computing, a pizza box is a style of case design for desktop computers or network switches. Pizza box cases tend to be wide and flat, normally 1.5 to 4 inches or 4 to 10 centimetres in height, resembling pizza delivery boxes and thus the name. This is in contrast to a tower system, whose case height is much greater than the width and has an "upright" appearance. In modern usage, the term "pizza box" is normally reserved for very flat cases with height no more than 2 inches (51 mm), while those taller than 2 inches are referred to as desktop cases instead.

The common setup of a pizza box system is to have the display monitor placed directly on top of the case, which serves as a podium to elevate the monitor more towards the user's eye level, and to have other peripherals placed in front and alongside the case. Occasionally, the pizza box may be laid on its sides in a tower-like orientation.

Data General's Aviion Unix server was the first to coin the expression when it advertised in 1991 with the tagline "Who just fit mainframe power in a pizza box?", [1] but most computers generally referred to as pizza box systems were high-end desktop systems such as Sun Microsystems workstations sold in the 1990s, most notably the SPARCstation 1 and SPARCstation 5. Other notable examples have been among the highest-performing desktop computers of their generations, including the SGI Indy, the NeXTstation, and the Amiga 1000, but the form factor was also seen in budget and lower-end lines such as the Macintosh LC family. [2]

A NeXTstation slab or pizza box workstation (2.52 in/6.4 cm high) sits flat under a 17 in/43 cm CRT monitor, 1990. NeXTstation.jpg
A NeXTstation slab or pizza box workstation (2.52 in/6.4 cm high) sits flat under a 17 in/43 cm CRT monitor, 1990.

The original SPARCstation 1 design included an expansion bus technology, SBus, expressly designed for the form factor; expansion cards were small, especially in comparison to other expansion cards in use at the time such as VMEbus, and were mounted horizontally instead of vertically. PC-compatible computers in this type of case typically use the PCI expansion bus and are usually either a) limited to one or two horizontally placed expansion cards or b) require special low-profile expansion cards, shorter than the PCI cards regular PCs use. [3]

The density of computing power and stackability of pizza box systems also made them attractive for use in data centers. Systems originally designed for desktop use were placed on shelves inside of 19-inch racks, sometimes requiring that part of their cases be cut off for them to fit. Since the late 1990s, pizza boxes have been a common form factor in office cubicles, data centers or industrial applications, where desktop space, rack room and density are critical. Servers in this form factor, as well as higher-end Ethernet switches, are now designed for rack mounting. Rack mount 1U computers come in all types of configurations and depths.

The pizza box form factor for smaller personal systems and thin clients remains in use well into the 21st century, though it is increasingly being superseded by laptops, nettops or All-in-One PC designs that embed the already size-reduced computer onto the keyboard or display monitor.

Related Research Articles

<span class="mw-page-title-main">Motherboard</span> Main printed circuit board (PCB) for a computing device

A motherboard is the main printed circuit board (PCB) in general-purpose computers and other expandable systems. It holds and allows communication between many of the crucial electronic components of a system, such as the central processing unit (CPU) and memory, and provides connectors for other peripherals. Unlike a backplane, a motherboard usually contains significant sub-systems, such as the central processor, the chipset's input/output and memory controllers, interface connectors, and other components integrated for general use.

<span class="mw-page-title-main">Power Macintosh</span> Family of personal computers released by Apple Computer

The Power Macintosh, later Power Mac, is a family of personal computers designed, manufactured, and sold by Apple Computer, Inc as the core of the Macintosh brand from March 1994 until August 2006.

<span class="mw-page-title-main">Desktop computer</span> Computer designed to be used at a fixed location

A desktop computer is a personal computer designed for regular use at a stationary location on or near a desk due to its size and power requirements. The most common configuration has a case that houses the power supply, motherboard, disk storage ; a keyboard and mouse for input; and a monitor, speakers, and, often, a printer for output. The case may be oriented horizontally or vertically and placed either underneath, beside, or on top of a desk.

<span class="mw-page-title-main">Expansion card</span> Circuit board for connecting to a computer system to add functionality

In computing, an expansion card is a printed circuit board that can be inserted into an electrical connector, or expansion slot on a computer's motherboard to add functionality to a computer system. Sometimes the design of the computer's case and motherboard involves placing most of these slots onto a separate, removable card. Typically such cards are referred to as a riser card in part because they project upward from the board and allow expansion cards to be placed above and parallel to the motherboard.

<span class="mw-page-title-main">PCI Express</span> Computer expansion bus standard

PCI Express, officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X and AGP bus standards. It is the common motherboard interface for personal computers' graphics cards, sound cards, hard disk drive host adapters, SSDs, Wi-Fi and Ethernet hardware connections. PCIe has numerous improvements over the older standards, including higher maximum system bus throughput, lower I/O pin count and smaller physical footprint, better performance scaling for bus devices, a more detailed error detection and reporting mechanism, and native hot-swap functionality. More recent revisions of the PCIe standard provide hardware support for I/O virtualization.

<span class="mw-page-title-main">SBus</span>

SBus is a computer bus system that was used in most SPARC-based computers from Sun Microsystems and others during the 1990s. It was introduced by Sun in 1989 to be a high-speed bus counterpart to their high-speed SPARC processors, replacing the earlier VMEbus used in their Motorola 68020- and 68030-based systems and early SPARC boxes. When Sun moved to open the SPARC definition in the early 1990s, SBus was likewise standardized and became IEEE-1496. In 1997 Sun started to migrate away from SBus to the Peripheral Component Interconnect (PCI) bus, and today SBus is no longer used.

<span class="mw-page-title-main">Macintosh LC family</span> Family of lower-cost Macintosh computers by Apple, Inc.

The Macintosh LC is a family of personal computers designed, manufactured and sold by Apple Computer, Inc. from 1990 to 1997.

<span class="mw-page-title-main">Blade server</span> Server computer that uses less energy and space than a conventional server

A blade server is a stripped-down server computer with a modular design optimized to minimize the use of physical space and energy. Blade servers have many components removed to save space, minimize power consumption and other considerations, while still having all the functional components to be considered a computer. Unlike a rack-mount server, a blade server fits inside a blade enclosure, which can hold multiple blade servers, providing services such as power, cooling, networking, various interconnects and management. Together, blades and the blade enclosure form a blade system, which may itself be rack-mounted. Different blade providers have differing principles regarding what to include in the blade itself, and in the blade system as a whole.

<span class="mw-page-title-main">SPARCstation 1</span>

The SPARCstation 1 is the first of the SPARCstation series of SPARC-based computer workstations sold by Sun Microsystems. The design originated in 1987 by a Sun spin-off company, Unisun, which was soon re-acquired. The SPARCstation 1 has a distinctive slim enclosure and was first sold in April 1989, with Sun's support ending in 1995.

<span class="mw-page-title-main">Processor Direct Slot</span>

A processor direct slot (PDS) is a slot incorporated into many older Macintosh models that allowed direct access to the signal pins of a CPU, similar to the functionality of a local bus in PCs. This would result in much higher speeds than having to go through a bus layer, such as NuBus, which typically ran at a slower 10 MHz speed.

<span class="mw-page-title-main">Computer case</span> Enclosure that contains most of the computer hardware

A computer case, also known as a computer chassis, is the enclosure that contains most of the hardware of a personal computer. The components housed inside the case are referred as the internal hardware, while hardware outside the case are known as peripherals.

<span class="mw-page-title-main">Computer tower</span> Computer case that stands vertically upright

In personal computing, a tower is a form factor of desktop computer case whose height is much greater than its width, thus having the appearance of an upstanding tower block, as opposed to a traditional "pizza box" computer case whose width is greater than its height and appears lying flat.

<span class="mw-page-title-main">SPARCstation</span> Family of SPARC-based computer workstations and servers by Sun Microsystems

The SPARCstation, SPARCserver and SPARCcenter product lines are a series of SPARC-based computer workstations and servers in desktop, desk side (pedestal) and rack-based form factor configurations, that were developed and sold by Sun Microsystems.

<span class="mw-page-title-main">Small form factor (desktop and motherboard)</span> Form factor for desktop computers and motherboards

Small form factor is a term used for desktop computers and for some of its components, chassis and motherboard, to indicate that they are designed in accordance with one of several standardized computer form factors intended to minimize the volume and footprint of a desktop computer compared to the standard ATX form factor.

The Apple Network Server (ANS) was a line of PowerPC-based server computers designed, manufactured and sold by Apple Computer, Inc. from February 1996 to April 1997. It was codenamed "Shiner" and originally consisted of two models, the Network Server 500/132 and the Network Server 700/150, which got a companion model, the Network Server 700/200 with a faster CPU in November 1996.

<span class="mw-page-title-main">Macintosh Quadra 605</span> Personal computer by Apple Computer

The Macintosh Quadra 605 is a personal computer designed, manufactured, and sold by Apple Computer from October 1993 to July 1996. The model names reflect a decision made at Apple in 1993 to follow an emerging industry trend of naming product families for their target customers – Quadra for business, LC for education, and Performa for home. Accordingly, the Performa 475 and 476 was sold in department stores and electronics stores such as Circuit City, whereas the Quadra was purchased through an authorized Apple reseller.

In computing, the motherboard form factor is the specification of a motherboard – the dimensions, power supply type, location of mounting holes, number of ports on the back panel, etc. Specifically, in the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rackmount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. Small form factors have been developed and implemented.

<span class="mw-page-title-main">Riser card</span>

A riser card is a printed circuit board that gives a computer motherboard the option for additional expansion cards to be added to the computer.

<span class="mw-page-title-main">Form factor (design)</span> Aspect of design which defines the size, shape, and other physical specifications of hardware

Form factor is a hardware design aspect that defines and prescribes the size, shape, and other physical specifications of components, particularly in electronics. A form factor may represent a broad class of similarly sized components, or it may prescribe a specific standard. It may also define an entire system, as in a computer form factor.

<span class="mw-page-title-main">Macintosh LC</span> Personal computer by Apple

The Macintosh LC is a personal computer designed, manufactured, and sold by Apple Computer, Inc. from October 1990 to March 1992.

References

  1. "Who just fit mainframe power in a pizza box... [advertisement]". CIO. 4 (7): 59. April 1991. Retrieved March 7, 2015.
  2. Kratzer, Gary (July 1993). "Reviews – Macintosh LC III". MacWorld Magazine. p. 134. The LC III shares the now-famous pizza-box design Apple pioneered with the original LC.
  3. "Low-Profile PCI". PCI-SIG Frequently Asked Questions. PCI-SIG. Archived from the original on February 15, 2008. Retrieved February 17, 2008.