This article includes a list of general references, but it lacks sufficient corresponding inline citations .(July 2014) |

A regular pentagon is a polygon, a two-dimensional polytope with 5 edges, represented by Schläfli symbol {5}. | A regular dodecahedron is a polyhedron, a three-dimensional polytope, with 12 pentagonal faces, represented by Schläfli symbol {5,3}. |

A regular 120-cell is a polychoron, a four-dimensional polytope, with 120 dodecahedral cells, represented by Schläfli symbol {5,3,3}. (shown here as a Schlegel diagram) | A regular cubic honeycomb is a tessellation, an infinite three-dimensional polytope, represented by Schläfli symbol {4,3,4}. |

The 256 vertices and 1024 edges of an 8-cube can be shown in this orthogonal projection (Petrie polygon) |

In mathematics, a **regular polytope** is a polytope whose symmetry group acts transitively on its flags, thus giving it the highest degree of symmetry. In particular, all its elements or j-faces (for all 0 ≤ *j* ≤ *n*, where n is the dimension of the polytope) — cells, faces and so on — are also transitive on the symmetries of the polytope, and are themselves regular polytopes of dimension * j*≤ *n*.

- Classification and description
- Schläfli symbols
- Duality of the regular polytopes
- Regular simplices
- Measure polytopes (hypercubes)
- Cross polytopes (orthoplexes)
- Classification by Coxeter groups
- History of discovery
- Convex polygons and polyhedra
- Star polygons and polyhedra
- Higher-dimensional polytopes
- Apeirotopes — infinite polytopes
- Regular complex polytopes
- Abstract polytopes
- Constructions
- Polygons
- Polyhedra
- Higher dimensions
- Regular polytopes in nature
- See also
- References
- Notes
- Bibliography
- External links

Regular polytopes are the generalized analog in any number of dimensions of regular polygons (for example, the square or the regular pentagon) and regular polyhedra (for example, the cube). The strong symmetry of the regular polytopes gives them an aesthetic quality that interests both non-mathematicians and mathematicians.

Classically, a regular polytope in n dimensions may be defined as having regular facets ([*n*–1]-faces) and regular vertex figures. These two conditions are sufficient to ensure that all faces are alike and all vertices are alike. Note, however, that this definition does not work for abstract polytopes.

A regular polytope can be represented by a Schläfli symbol of the form {a, b, c, ..., y, z}, with regular facets as {a, b, c, ..., y}, and regular vertex figures as {b, c, ..., y, z}.

Regular polytopes are classified primarily according to their dimension.

Three classes of regular polytopes exist in every dimension:

- Regular simplex
- Measure polytope (Hypercube)
- Cross polytope (Orthoplex)

Any other regular polytope is said to be exceptional.

In one dimension, the line segment simultaneously serves as the 1-simplex, the 1-hypercube and the 1-orthoplex.

In two dimensions, there are infinitely many regular polygons, namely the regular *n*-sided polygon for *n >= 3*. The triangle is the 2-simplex. The square is both the 2-hypercube and the 2-orthoplex. The n-sided polygons for n>=5 are exceptional.

In three and four dimensions, there are several more exceptional regular polyhedra and 4-polytopes.

In five dimensions and above, the simplex, hypercube and orthoplex are the only regular polytopes. There are no exceptional regular polytopes in these dimensions.

See also the list of regular polytopes.

Regular polytopes can be further classified according to symmetry. For example, the cube and the regular octahedron share the same symmetry, as do the regular dodecahedron and icosahedron. Two distinct regular polytopes with the same symmetry are dual to one another. Indeed, symmetry groups are sometimes named after regular polytopes, for example the tetrahedral and icosahedral symmetries.

The idea of a polytope is sometimes generalised to include related kinds of geometrical object. Some of these have regular examples, as discussed in the section on historical discovery below.

A concise symbolic representation for regular polytopes was developed by Ludwig Schläfli in the 19th century, and a slightly modified form has become standard. The notation is best explained by adding one dimension at a time.

- A convex regular polygon having
*n*sides is denoted by {*n*}. So an equilateral triangle is {3}, a square {4}, and so on indefinitely. A regular*n*-sided star polygon which winds*m*times around its centre is denoted by the fractional value {*n*/*m*}, where*n*and*m*are co-prime, so a regular pentagram is {5/2}. - A regular polyhedron having faces {
*n*} with*p*faces joining around a vertex is denoted by {*n*,*p*}. The nine regular polyhedra are {3, 3} {3, 4} {4, 3} {3, 5} {5, 3} {3, 5/2} {5/2, 3} {5, 5/2} and {5/2, 5}. {*p*} is the*vertex figure*of the polyhedron. - A regular 4-polytope having cells {
*n*,*p*} with*q*cells joining around an edge is denoted by {*n*,*p*,*q*}. The vertex figure of the 4-polytope is a {*p*,*q*}. - A regular 5-polytope is an {
*n*,*p*,*q*,*r*}. And so on.

The dual of a regular polytope is also a regular polytope. The Schläfli symbol for the dual polytope is just the original symbol written backwards: {3, 3} is self-dual, {3, 4} is dual to {4, 3}, {4, 3, 3} to {3, 3, 4} and so on.

The vertex figure of a regular polytope is the dual of the dual polytope's facet. For example, the vertex figure of {3, 3, 4} is {3, 4}, the dual of which is {4, 3} — a cell of {4, 3, 3}.

The measure and cross polytopes in any dimension are dual to each other.

If the Schläfli symbol is palindromic, i.e. reads the same forwards and backwards, then the polyhedron is self-dual. The self-dual regular polytopes are:

- All regular polygons, {a}.
- All regular
*n*-simplexes, {3,3,...,3} - The regular 24-cell in 4 dimensions, {3,4,3}.
- The great 120-cell ({5,5/2,5}) and grand stellated 120-cell ({5/2,5,5/2}) in 4 dimensions.
- All regular
*n*-dimensional cubic honeycombs, {4,3,...,3,4}. These may be treated as infinite polytopes. - Hyperbolic tilings and honeycombs (tilings {p,p} with p>4 in 2 dimensions, {4,4,4}, {5,3,5}. {3,5,3}, {6,3,6}, and {3,6,3} in 3 dimensions, {5,3,3,5} in 4 dimensions, and {3,3,4,3,3} in 5 dimensions).

Line segment | Triangle | Tetrahedron | Pentachoron |

Begin with a point *A*. Mark point *B* at a distance *r* from it, and join to form a line segment. Mark point *C* in a second, orthogonal, dimension at a distance *r* from both, and join to *A* and *B* to form an equilateral triangle. Mark point *D* in a third, orthogonal, dimension a distance *r* from all three, and join to form a regular tetrahedron. And so on for higher dimensions.

These are the **regular simplices** or **simplexes**. Their names are, in order of dimension:

- 0. Point
- 1. Line segment
- 2. Equilateral triangle (regular trigon)
- 3. Regular tetrahedron
- 4. Regular pentachoron
*or*4-simplex - 5. Regular hexateron
*or*5-simplex - ... An
*n*-simplex has*n*+1 vertices.

Square | Cube | Tesseract |

Begin with a point *A*. Extend a line to point *B* at distance *r*, and join to form a line segment. Extend a second line of length *r*, orthogonal to *AB*, from *B* to *C*, and likewise from *A* to *D*, to form a square *ABCD*. Extend lines of length *r* respectively from each corner, orthogonal to both *AB* and *BC* (i.e. upwards). Mark new points *E*,*F*,*G*,*H* to form the cube *ABCDEFGH*. And so on for higher dimensions.

These are the **measure polytopes** or **hypercubes**. Their names are, in order of dimension:

- 0. Point
- 1. Line segment
- 2. Square (regular tetragon)
- 3. Cube (regular hexahedron)
- 4. Tesseract (regular octachoron)
*or*4-cube - 5. Penteract (regular decateron)
*or*5-cube - ... An
*n*-cube has*2*vertices.^{n}

Square | Octahedron | 16-cell |

Begin with a point *O*. Extend a line in opposite directions to points *A* and *B* a distance *r* from *O* and 2*r* apart. Draw a line *COD* of length 2*r*, centred on *O* and orthogonal to *AB*. Join the ends to form a square *ACBD*. Draw a line *EOF* of the same length and centered on 'O', orthogonal to *AB* and *CD* (i.e. upwards and downwards). Join the ends to the square to form a regular octahedron. And so on for higher dimensions.

These are the **cross polytopes** or **orthoplexes**. Their names are, in order of dimensionality:

- 0. Point
- 1. Line segment
- 2. Square (regular tetragon)
- 3. Regular octahedron
- 4. Regular hexadecachoron (16-cell)
*or*4-orthoplex - 5. Regular triacontakaiditeron (Pentacross)
*or*5-orthoplex - ... An
*n*-orthoplex has*2n*vertices.

Regular polytopes can be classified by their isometry group. These are finite Coxeter groups, but not every finite Coxeter groups may be realised as the isometry group of a regular polytope. Regular polytopes are in bijection with Coxeter groups with linear Coxeter-Dynkin diagram (without branch point) and an increasing numbering of the nodes. Reversing the numbering gives the dual polytope.

The classification of finite Coxeter groups, which goes back to ( Coxeter 1935 ), therefore implies the classification of regular polytopes:

- Type , the symmetric group, gives the regular simplex,
- Type , gives the measure polytope and the cross polytope (both can be distinguished by the increasing numbering of the nodes of the Coxeter-Dynkin diagram),
- Exceptional types give the regular polygons (with ),
- Exceptional type gives the regular dodecahedron and icosahedron (again the numbering allows to distinguish them),
- Exceptional type gives the 120-cell and the 600-cell,
- Exceptional type gives the 24-cell, which is self-dual.

The bijection between regular polytopes and Coxeter groups with linear Coxeter-Dynkin diagram can be understood as follows. Consider a regular polytope of dimension and take its barycentric subdivision. The fundamental domain of the isometry group action on is given by any simplex in the barycentric subdivision. The simplex has vertices which can be numbered from 0 to by the dimension of the corresponding face of (the face they are the barycenter of). The isometry group of is generated by the reflections around the hyperplanes of containing the vertex number (since the barycenter of the whole polytope is fixed by any isometry). These hyperplanes can be numbered by the vertex of they do not contain. The remaining thing to check is that any two hyperplanes with adjacent numbers cannot be orthogonal, whereas hyperplanes with non-adjacent numbers are orthogonal. This can be done using induction (since all facets of are again regular polytopes). Therefore, the Coxeter-Dynkin diagram of the isometry group of has vertices numbered from 0 to such that adjacent numbers are linked by at least one edge and non-adjacent numbers are not linked.

The earliest surviving mathematical treatment of regular polygons and polyhedra comes to us from ancient Greek mathematicians. The five Platonic solids were known to them. Pythagoras knew of at least three of them and Theaetetus (c. 417 BC – 369 BC) described all five. Later, Euclid wrote a systematic study of mathematics, publishing it under the title * Elements *, which built up a logical theory of geometry and number theory. His work concluded with mathematical descriptions of the five Platonic solids.

Our understanding remained static for many centuries after Euclid. The subsequent history of the regular polytopes can be characterised by a gradual broadening of the basic concept, allowing more and more objects to be considered among their number. Thomas Bradwardine (Bradwardinus) was the first to record a serious study of star polygons. Various star polyhedra appear in Renaissance art, but it was not until Johannes Kepler studied the small stellated dodecahedron and the great stellated dodecahedron in 1619 that he realised these two were regular. Louis Poinsot discovered the great dodecahedron and great icosahedron in 1809, and Augustin Cauchy proved the list complete in 1812. These polyhedra are known as collectively as the Kepler-Poinsot polyhedra.

Kepler-Poinsot polyhedra | |||

Small stellated dodecahedron | Great stellated dodecahedron | Great dodecahedron | Great icosahedron |

It was not until the 19th century that a Swiss mathematician, Ludwig Schläfli, examined and characterised the regular polytopes in higher dimensions. His efforts were first published in full in Schläfli (1901), six years posthumously, although parts of it were published in Schläfli (1855) and Schläfli (1858). Between 1880 and 1900, Schläfli's results were rediscovered independently by at least nine other mathematicians — see Coxeter (1973 , pp. 143–144) for more details. Schläfli called such a figure a "polyschem" (in English, "polyscheme" or "polyschema"). The term "polytope" was introduced by Reinhold Hoppe, one of Schläfli's rediscoverers, in 1882, and first used in English by Alicia Boole Stott some twenty years later. The term "polyhedroids" was also used in earlier literature (Hilbert, 1952).

Coxeter (1973) is probably the most comprehensive printed treatment of Schläfli's and similar results to date. Schläfli showed that there are six regular convex polytopes in 4 dimensions. Five of them can be seen as analogous to the Platonic solids: the 4-simplex (or pentachoron) to the tetrahedron, the hypercube (or tesseract) to the cube, the 4-orthoplex (or hexadecachoron or 16-cell) to the octahedron, the 120-cell to the dodecahedron, and the 600-cell to the icosahedron. The sixth, the 24-cell, can be seen as a transitional form between the hypercube and 16-cell, analogous to the way that the cuboctahedron and the rhombic dodecahedron are transitional forms between the cube and the octahedron.

In five and more dimensions, there are exactly three regular polytopes, which correspond to the tetrahedron, cube and octahedron: these are the regular simplices, measure polytopes and cross polytopes. Descriptions of these may be found in the list of regular polytopes. Also of interest are the star regular 4-polytopes, partially discovered by Schläfli.

By the end of the 19th century, mathematicians such as Arthur Cayley and Ludwig Schläfli had developed the theory of regular polytopes in four and higher dimensions, such as the tesseract and the 24-cell.

The latter are difficult (though not impossible) to visualise through a process of dimensional analogy, since they retain the familiar symmetry of their lower-dimensional analogues. The tesseract contains 8 cubical cells. It consists of two cubes in parallel hyperplanes with corresponding vertices cross-connected in such a way that the 8 cross-edges are equal in length and orthogonal to the 12+12 edges situated on each cube. The corresponding faces of the two cubes are connected to form the remaining 6 cubical faces of the tesseract. The 24-cell can be derived from the tesseract by joining the 8 vertices of each of its cubical faces to an additional vertex to form the four-dimensional analogue of a pyramid. Both figures, as well as other 4-dimensional figures, can be directly visualised and depicted using 4-dimensional stereographs.^{ [1] }

Harder still to imagine are the more modern abstract regular polytopes such as the 57-cell or the 11-cell. From the mathematical point of view, however, these objects have the same aesthetic qualities as their more familiar two and three-dimensional relatives.

At the start of the 20th century, the definition of a regular polytope was as follows.

- A regular polygon is a polygon whose edges are all equal and whose angles are all equal.
- A regular polyhedron is a polyhedron whose faces are all congruent regular polygons, and whose vertex figures are all congruent and regular.
- And so on, a regular
*n*-polytope is an*n*-dimensional polytope whose (*n*− 1)-dimensional faces are all regular and congruent, and whose vertex figures are all regular and congruent.

This is a "recursive" definition. It defines regularity of higher dimensional figures in terms of regular figures of a lower dimension. There is an equivalent (non-recursive) definition, which states that a polytope is regular if it has a sufficient degree of symmetry.

- An
*n*-polytope is regular if any set consisting of a vertex, an edge containing it, a 2-dimensional face containing the edge, and so on up to*n*−1 dimensions, can be mapped to any other such set by a symmetry of the polytope.

So for example, the cube is regular because if we choose a vertex of the cube, and one of the three edges it is on, and one of the two faces containing the edge, then this triplet, known as a ** flag **, (vertex, edge, face) can be mapped to any other such flag by a suitable symmetry of the cube. Thus we can define a regular polytope very succinctly:

- A regular polytope is one whose symmetry group is transitive on its flags.

In the 20th century, some important developments were made. The symmetry groups of the classical regular polytopes were generalised into what are now called Coxeter groups. Coxeter groups also include the symmetry groups of regular tessellations of space or of the plane. For example, the symmetry group of an infinite chessboard would be the Coxeter group [4,4].

In the first part of the 20th century, Coxeter and Petrie discovered three infinite structures {4, 6}, {6, 4} and {6, 6}. They called them regular skew polyhedra, because they seemed to satisfy the definition of a regular polyhedron — all the vertices, edges and faces are alike, all the angles are the same, and the figure has no free edges. Nowadays, they are called infinite polyhedra or apeirohedra. The regular tilings of the plane {4, 4}, {3, 6} and {6, 3} can also be regarded as infinite polyhedra.

In the 1960s Branko Grünbaum issued a call to the geometric community to consider more abstract types of regular polytopes that he called *polystromata*. He developed the theory of polystromata, showing examples of new objects he called regular apeirotopes, that is, regular polytopes with infinitely many faces. A simple example of a skew apeirogon would be a zig-zag. It seems to satisfy the definition of a regular polygon — all the edges are the same length, all the angles are the same, and the figure has no loose ends (because they can never be reached). More importantly, perhaps, there are symmetries of the zig-zag that can map any pair of a vertex and attached edge to any other. Since then, other regular apeirogons and higher apeirotopes have continued to be discovered.

A complex number has a real part, which is the bit we are all familiar with, and an imaginary part, which is a multiple of the square root of minus one. A complex Hilbert space has its x, y, z, etc. coordinates as complex numbers. This effectively doubles the number of dimensions. A polytope constructed in such a unitary space is called a ** complex polytope **.^{ [2] }

Grünbaum also discovered the 11-cell, a four-dimensional self-dual object whose facets are not icosahedra, but are "hemi-icosahedra" — that is, they are the shape one gets if one considers opposite faces of the icosahedra to be actually the *same* face ( Grünbaum 1976 ). The hemi-icosahedron has only 10 triangular faces, and 6 vertices, unlike the icosahedron, which has 20 and 12.

This concept may be easier for the reader to grasp if one considers the relationship of the cube and the hemicube. An ordinary cube has 8 corners, they could be labeled A to H, with A opposite H, B opposite G, and so on. In a hemicube, A and H would be treated as the same corner. So would B and G, and so on. The edge AB would become the same edge as GH, and the face ABEF would become the same face as CDGH. The new shape has only three faces, 6 edges and 4 corners.

The 11-cell cannot be formed with regular geometry in flat (Euclidean) hyperspace, but only in positively curved (elliptic) hyperspace.

A few years after Grünbaum's discovery of the 11-cell, H. S. M. Coxeter independently discovered the same shape. He had earlier discovered a similar polytope, the 57-cell (Coxeter 1982, 1984).

By 1994 Grünbaum was considering polytopes abstractly as combinatorial sets of points or vertices, and was unconcerned whether faces were planar. As he and others refined these ideas, such sets came to be called ** abstract polytopes **. An abstract polytope is defined as a partially ordered set (poset), whose elements are the polytope's faces (vertices, edges, faces etc.) ordered by *containment*. Certain restrictions are imposed on the set that are similar to properties satisfied by the classical regular polytopes (including the Platonic solids). The restrictions, however, are loose enough that regular tessellations, hemicubes, and even objects as strange as the 11-cell or stranger, are all examples of regular polytopes.

A geometric polytope is understood to be a *realization* of the abstract polytope, such that there is a one-to-one mapping from the abstract elements to the corresponding faces of the geometric realisation. Thus, any geometric polytope may be described by the appropriate abstract poset, though not all abstract polytopes have proper geometric realizations.

The theory has since been further developed, largely by McMullen & Schulte (2002), but other researchers have also made contributions.

Regularity has a related, though different meaning for abstract polytopes, since angles and lengths of edges have no meaning.

The definition of regularity in terms of the transitivity of flags as given in the introduction applies to abstract polytopes.

Any classical regular polytope has an abstract equivalent which is regular, obtained by taking the set of faces. But non-regular classical polytopes can have regular abstract equivalents, since abstract polytopes do not retain information about angles and edge lengths, for example. And a regular abstract polytope may not be realisable as a classical polytope.

*All polygons* are regular in the abstract world, for example, whereas only those having equal angles and edges of equal length are regular in the classical world.

The concept of *vertex figure* is also defined differently for an abstract polytope. The vertex figure of a given abstract *n*-polytope at a given vertex *V* is the set of all abstract faces which contain *V*, including *V* itself. More formally, it is the abstract section

*F*_{n}/*V*= {*F*|*V*≤*F*≤*F*_{n}}

where *F*_{n} is the maximal face, i.e. the notional *n*-face which contains all other faces. Note that each *i*-face, *i* ≥ 0 of the original polytope becomes an (*i* − 1)-face of the vertex figure.

Unlike the case for Euclidean polytopes, an abstract polytope with regular facets and vertex figures *may or may not* be regular itself – for example, the square pyramid, all of whose facets and vertex figures are regular abstract polygons.

The classical vertex figure will, however, be a realisation of the abstract one.

The traditional way to construct a regular polygon, or indeed any other figure on the plane, is by compass and straightedge. Constructing some regular polygons in this way is very simple (the easiest is perhaps the equilateral triangle), some are more complex, and some are impossible ("not constructible"). The simplest few regular polygons that are impossible to construct are the *n*-sided polygons with *n* equal to 7, 9, 11, 13, 14, 18, 19, 21,...

Constructibility in this sense refers only to ideal constructions with ideal tools. Of course reasonably accurate approximations can be constructed by a range of methods; while theoretically possible constructions may be impractical.

Euclid's *Elements* gave what amount to ruler-and-compass constructions for the five Platonic solids.^{ [3] } However, the merely practical question of how one might draw a straight line in space, even with a ruler, might lead one to question what exactly it means to "construct" a regular polyhedron. (One could ask the same question about the polygons, of course.)

The English word "construct" has the connotation of systematically building the thing constructed. The most common way presented to construct a regular polyhedron is via a fold-out net. To obtain a fold-out net of a polyhedron, one takes the surface of the polyhedron and cuts it along just enough edges so that the surface may be laid out flat. This gives a plan for the net of the unfolded polyhedron. Since the Platonic solids have only triangles, squares and pentagons for faces, and these are all constructible with a ruler and compass, there exist ruler-and-compass methods for drawing these fold-out nets. The same applies to star polyhedra, although here we must be careful to make the net for only the visible outer surface.

If this net is drawn on cardboard, or similar foldable material (for example, sheet metal), the net may be cut out, folded along the uncut edges, joined along the appropriate cut edges, and so forming the polyhedron for which the net was designed. For a given polyhedron there may be many fold-out nets. For example, there are 11 for the cube, and over 900000 for the dodecahedron.^{ [4] }

Numerous children's toys, generally aimed at the teen or pre-teen age bracket, allow experimentation with regular polygons and polyhedra. For example, klikko provides sets of plastic triangles, squares, pentagons and hexagons that can be joined edge-to-edge in a large number of different ways. A child playing with such a toy could re-discover the Platonic solids (or the Archimedean solids), especially if given a little guidance from a knowledgeable adult.

In theory, almost any material may be used to construct regular polyhedra.^{ [5] } They may be carved out of wood, modeled out of wire, formed from stained glass. The imagination is the limit.

In higher dimensions, it becomes harder to say what one means by "constructing" the objects. Clearly, in a 3-dimensional universe, it is impossible to build a physical model of an object having 4 or more dimensions. There are several approaches normally taken to overcome this matter.

The first approach, suitable for four dimensions, uses four-dimensional stereography.^{ [1] } Depth in a third dimension is represented with horizontal relative displacement, depth in a fourth dimension with vertical relative displacement between the left and right images of the stereograph.

The second approach is to embed the higher-dimensional objects in three-dimensional space, using methods analogous to the ways in which three-dimensional objects are drawn on the plane. For example, the fold out nets mentioned in the previous section have higher-dimensional equivalents.^{ [6] } One might even imagine building a model of this fold-out net, as one draws a polyhedron's fold-out net on a piece of paper. Sadly, we could never do the necessary folding of the 3-dimensional structure to obtain the 4-dimensional polytope because of the constraints of the physical universe. Another way to "draw" the higher-dimensional shapes in 3 dimensions is via some kind of projection, for example, the analogue of either orthographic or perspective projection. Coxeter's famous book on polytopes ( Coxeter 1973 ) has some examples of such orthographic projections.^{ [7] } Note that immersing even 4-dimensional polychora directly into two dimensions is quite confusing. Easier to understand are 3-d models of the projections. Such models are occasionally found in science museums or mathematics departments of universities (such as that of the Université Libre de Bruxelles).

The intersection of a four (or higher) dimensional regular polytope with a three-dimensional hyperplane will be a polytope (not necessarily regular). If the hyperplane is moved through the shape, the three-dimensional slices can be combined, animated into a kind of four dimensional object, where the fourth dimension is taken to be time. In this way, we can see (if not fully grasp) the full four-dimensional structure of the four-dimensional regular polytopes, via such cutaway cross sections. This is analogous to the way a CAT scan reassembles two-dimensional images to form a 3-dimensional representation of the organs being scanned. The ideal would be an animated hologram of some sort, however, even a simple animation such as the one shown can already give some limited insight into the structure of the polytope.

Another way a three-dimensional viewer can comprehend the structure of a four-dimensional polytope is through being "immersed" in the object, perhaps via some form of virtual reality technology. To understand how this might work, imagine what one would see if space were filled with cubes. The viewer would be inside one of the cubes, and would be able to see cubes in front of, behind, above, below, to the left and right of himself. If one could travel in these directions, one could explore the array of cubes, and gain an understanding of its geometrical structure. An infinite array of cubes is not a polytope in the traditional sense. In fact, it is a tessellation of 3-dimensional (Euclidean) space. However, a 4-polytope can be considered a tessellation of a 3-dimensional non-Euclidean space, namely, a tessellation of the surface of a four-dimensional sphere (a 4-dimensional spherical tiling).

Locally, this space seems like the one we are familiar with, and therefore, a virtual-reality system could, in principle, be programmed to allow exploration of these "tessellations", that is, of the 4-dimensional regular polytopes. The mathematics department at UIUC has a number of pictures of what one would see if embedded in a tessellation of hyperbolic space with dodecahedra. Such a tessellation forms an example of an infinite abstract regular polytope.

Normally, for abstract regular polytopes, a mathematician considers that the object is "constructed" if the structure of its symmetry group is known. This is because of an important theorem in the study of abstract regular polytopes, providing a technique that allows the abstract regular polytope to be constructed from its symmetry group in a standard and straightforward manner.

For examples of polygons in nature, see:

Each of the Platonic solids occurs naturally in one form or another:

In geometry, a **Kepler–Poinsot polyhedron** is any of four regular star polyhedra.

In geometry, a **polyhedron** is a three-dimensional shape with flat polygonal faces, straight edges and sharp corners or vertices.

In elementary geometry, a **polytope** is a geometric object with flat sides (*faces*). Polytopes are the generalization of three-dimensional polyhedra to any number of dimensions. Polytopes may exist in any general number of dimensions n as an n-dimensional polytope or **n-polytope**. For example, a two-dimensional polygon is a 2-polytope and a three-dimensional polyhedron is a 3-polytope. In this context, "flat sides" means that the sides of a (*k* + 1)-polytope consist of k-polytopes that may have (*k* – 1)-polytopes in common.

In geometry, a **Platonic solid** is a convex, regular polyhedron in three-dimensional Euclidean space. Being a regular polyhedron means that the faces are congruent regular polygons, and the same number of faces meet at each vertex. There are only five such polyhedra:

In geometry, a **4-polytope** is a four-dimensional polytope. It is a connected and closed figure, composed of lower-dimensional polytopal elements: vertices, edges, faces (polygons), and cells (polyhedra). Each face is shared by exactly two cells. The 4-polytopes were discovered by the Swiss mathematician Ludwig Schläfli before 1853.

In geometry, **stellation** is the process of extending a polygon in two dimensions, polyhedron in three dimensions, or, in general, a polytope in *n* dimensions to form a new figure. Starting with an original figure, the process extends specific elements such as its edges or face planes, usually in a symmetrical way, until they meet each other again to form the closed boundary of a new figure. The new figure is a stellation of the original. The word *stellation* comes from the Latin *stellātus*, "starred", which in turn comes from Latin *stella*, "star". Stellation is the reciprocal or dual process to *faceting*.

A **regular polyhedron** is a polyhedron whose symmetry group acts transitively on its flags. A regular polyhedron is highly symmetrical, being all of edge-transitive, vertex-transitive and face-transitive. In classical contexts, many different equivalent definitions are used; a common one is that the faces are congruent regular polygons which are assembled in the same way around each vertex.

In geometry, the **Schläfli symbol** is a notation of the form that defines regular polytopes and tessellations.

In geometry, a **cross-polytope**, **hyperoctahedron**, **orthoplex**, or **cocube** is a regular, convex polytope that exists in *n*-dimensional Euclidean space. A 2-dimensional cross-polytope is a square, a 3-dimensional cross-polytope is a regular octahedron, and a 4-dimensional cross-polytope is a 16-cell. Its facets are simplexes of the previous dimension, while the cross-polytope's vertex figure is another cross-polytope from the previous dimension.

In geometry, a **vertex figure**, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off.

In Euclidean geometry, **rectification**, also known as **critical truncation** or **complete-truncation**, is the process of truncating a polytope by marking the midpoints of all its edges, and cutting off its vertices at those points. The resulting polytope will be bounded by vertex figure facets and the rectified facets of the original polytope.

In geometry, a **truncation** is an operation in any dimension that cuts polytope vertices, creating a new facet in place of each vertex. The term originates from Kepler's names for the Archimedean solids.

In geometry, a **five-dimensional polytope** is a polytope in five-dimensional space, bounded by (4-polytope) facets, pairs of which share a polyhedral cell.

In geometry, a **uniform polytope** of dimension three or higher is a vertex-transitive polytope bounded by uniform facets. The uniform polytopes in two dimensions are the regular polygons.

In geometry, a **complex polytope** is a generalization of a polytope in real space to an analogous structure in a complex Hilbert space, where each real dimension is accompanied by an imaginary one.

In geometry, a **quasiregular polyhedron** is a uniform polyhedron that has exactly two kinds of regular faces, which alternate around each vertex. They are vertex-transitive and edge-transitive, hence a step closer to regular polyhedra than the semiregular, which are merely vertex-transitive.

In mathematics, a **regular 4-polytope** or **regular polychoron** is a regular four-dimensional polytope. They are the four-dimensional analogues of the regular polyhedra in three dimensions and the regular polygons in two dimensions.

In six-dimensional geometry, a **six-dimensional polytope** or **6-polytope** is a polytope, bounded by 5-polytope facets.

In geometry, the **density** of a star polyhedron is a generalization of the concept of winding number from two dimensions to higher dimensions, representing the number of windings of the polyhedron around the center of symmetry of the polyhedron. It can be determined by passing a ray from the center to infinity, passing only through the facets of the polytope and not through any lower dimensional features, and counting how many facets it passes through. For polyhedra for which this count does not depend on the choice of the ray, and for which the central point is not itself on any facet, the density is given by this count of crossed facets.

- 1 2 Brisson, David W. (2019) [1978]. "Visual Comprehension in n-Dimensions". In Brisson, David W. (ed.).
*Hypergraphics: Visualizing Complex Relationships In Arts, Science, And Technololgy*. AAAS Selected Symposium. Vol. 24. Taylor & Francis. pp. 109–145. ISBN 978-0-429-70681-3. - ↑ Coxeter (1974)
- ↑ See, for example, Euclid's Elements.
- ↑ Some interesting fold-out nets of the cube, octahedron, dodecahedron and icosahedron are available here.
- ↑ Instructions for building origami models may be found here, for example.
- ↑ Some of these may be viewed at .
- ↑ Other examples may be found on the web (see for example ).

- Coxeter, H. S. M. (1935), "The complete enumeration of finite groups of the form ",
*J. London Math. Soc.*,**10**(1): 21–25, doi:10.1112/jlms/s1-10.37.21 - — (1973) [1948].
*Regular Polytopes*(3rd ed.). Dover. ISBN 0-486-61480-8. - — (1974).
*Regular Complex Polytopes*. Cambridge University Press. ISBN 052120125X. - — (1991).
*Regular Complex Polytopes*(2nd ed.). Cambridge University Press. ISBN 978-0-521-39490-1. - Cromwell, Peter R. (1999).
*Polyhedra*. Cambridge University Press. ISBN 978-0-521-66405-9. - Euclid (1956).
*Elements*. Translated by Heath, T. L. Cambridge University Press. - Grünbaum, B. (1976).
*Regularity of Graphs, Complexes and Designs*. Problèmes Combinatoires et Théorie des Graphes, Colloquium Internationale CNRS, Orsay. Vol. 260. pp. 191–197. - Grünbaum, B. (1993). "Polyhedra with hollow faces". In Bisztriczky, T.; et al. (eds.).
*POLYTOPES: abstract, convex, and computational*. Mathematical and physical sciences, NATO Advanced Study Institute. Vol. 440. Kluwer Academic. pp. 43–70. ISBN 0792330161. - McMullen, P.; Schulte, S. (2002).
*Abstract Regular Polytopes*. Cambridge University Press. - Sanford, V. (1930).
*A Short History Of Mathematics*. The Riverside Press. - Schläfli, L. (1855). "Réduction d'une intégrale multiple, qui comprend l'arc de cercle et l'aire du triangle sphérique comme cas particuliers".
*Journal de Mathématiques*.**20**: 359–394. - Schläfli, L. (1858). "On the multiple integral ∫^ n dxdy... dz, whose limits are p_1= a_1x+ b_1y+…+ h_1z> 0, p_2> 0,..., p_n> 0, and x^ 2+ y^ 2+…+ z^ 2< 1".
*Quarterly Journal of Pure and Applied Mathematics*.**2**: 269–301.**3**(1860) pp54–68, 97–108. - Schläfli, L. (1901). "Theorie der vielfachen Kontinuität".
*Denkschriften der Schweizerischen Naturforschenden Gesellschaft*.**38**: 1–237. - Smith, J. V. (1982).
*Geometrical and Structural Crystallography*(2nd ed.). Wiley. ISBN 0471861685. - Van der Waerden, B. L. (1954).
*Science Awakening*. Translated by Dresden, Arnold. P Noordhoff. - D.M.Y. Sommerville (2020) [1930]. "X. The Regular Polytopes".
*Introduction to the Geometry of*. Courier Dover. pp. 159–192. ISBN 978-0-486-84248-6.**n**Dimensions

- The Atlas of Small Regular Polytopes - List of abstract regular polytopes.

This page is based on this Wikipedia article

Text is available under the CC BY-SA 4.0 license; additional terms may apply.

Images, videos and audio are available under their respective licenses.

Text is available under the CC BY-SA 4.0 license; additional terms may apply.

Images, videos and audio are available under their respective licenses.