SP&S Class A3

Last updated
A-3
Type and origin
Power typeSteam
Builder Alco-Schenectady
Build dateJanuary 1914
Specifications
Configuration:
   Whyte 0-6-0
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.51 in (1,295 mm)
Loco weight153,800 lb (69.8 t)
Fuel typeOil
Boiler pressure165 lbf/in2 (1.14 MPa)
Cylinders Two
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Performance figures
Tractive effort 31,200 lbf (138.78 kN)
Career
Operators Spokane, Portland and Seattle Railway
Class A-3
Locale United States
Retired1952
sources: [1]

Spokane, Portland and Seattle Railway's Class A-3 was a class of 0-6-0 steam locomotive switchers.

Contents

Background

Design Features

Construction History

Operational history

Numbering

Disposition

Related Research Articles

<span class="mw-page-title-main">Great Northern Railway (U.S.)</span> Defunct American Class I railroad

The Great Northern Railway was an American Class I railroad. Running from Saint Paul, Minnesota, to Seattle, Washington, it was the creation of 19th-century railroad entrepreneur James J. Hill and was developed from the Saint Paul & Pacific Railroad. The Great Northern's route was the northernmost transcontinental railroad route in the U.S.

<i>Empire Builder</i> Northern U.S. rail service

The Empire Builder is a daily long-distance passenger train operated by Amtrak between Chicago and either Seattle or Portland via two sections west of Spokane. Introduced in 1929, it was the flagship passenger train of the Great Northern Railway and was retained by Amtrak when it took over intercity rail service in 1971.

<span class="mw-page-title-main">BNSF Railway Bridge 5.1</span> Railroad bridge in Portland, Oregon

The BNSF Railway Bridge 5.1, also known as the St. Johns Railroad Bridge or the Willamette River Railroad Bridge, is a through truss railway bridge with a vertical lift that spans the Willamette River in Portland, Oregon, United States. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was originally a swing-span bridge, and its swing-span section was the longest in the world at the time. However, 81 years later the main span was converted from a swing-type to a vertical-lift type, in order to widen the navigation channel. The lift span is one of the highest and longest in the world. The bridge consists of five sections, with the two sections closest to the bank on each side fixed.

<span class="mw-page-title-main">Spokane, Portland and Seattle Railway</span> Defunct American Class I railroad (1908–1970)

The Spokane, Portland & Seattle Railway was a railroad in the northwest United States. Incorporated in 1905, it was a joint venture by the Great Northern Railway and the Northern Pacific Railway to build a railroad along the north bank of the Columbia River. The railroad later built or acquired other routes in Oregon. The SP&S was merged into the Burlington Northern in March, 1970. Remnants of the line are currently operated by BNSF Railway and the Portland and Western Railroad.

<i>North Coast Limited</i> Former named passenger train

The North Coast Limited was a named passenger train operated by the Northern Pacific Railway between Chicago and Seattle via Bismarck, North Dakota. It started on April 29, 1900, and continued as a Burlington Northern Railroad train after the merger on March 2, 1970 with Great Northern Railway and the Chicago, Burlington and Quincy Railroad. The next year, it ceased operations after the trains which left their originating stations on April 30, 1971, the day before Amtrak began service, arrived at their destinations.

<span class="mw-page-title-main">Spokane, Portland and Seattle 700</span> Preserved American 4-8-4 steam locomotive

Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving "original" Spokane, Portland and Seattle Railway steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. Nearly identical to the class "A-3" Northerns built for Northern Pacific Railway, it burns oil instead of coal.

<span class="mw-page-title-main">Spokane Intermodal Center</span> Train station in Spokane, Washington, United States

The Spokane Intermodal Center is an intermodal transport facility located in Spokane, Washington, United States. It serves as a service stop for the Amtrak Empire Builder, as well as the Greyhound, Trailways, and Jefferson Lines station for Spokane. The Empire Builder provides service daily between Chicago, Illinois and Spokane before continuing on to Seattle, Washington or Portland, Oregon.

<span class="mw-page-title-main">Burlington Northern Railroad Bridge 9.6</span> Railroad bridge crossing the Columbia River between Portland, Oregon and Vancouver, Washington

Burlington Northern Railroad Bridge 9.6 or BNSF Railway Bridge 9.6, also known as the Columbia River Railroad Bridge, is through truss railway bridge across the Columbia River, between Portland, Oregon, and Vancouver, Washington, owned and operated by BNSF Railway. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was the first bridge of any kind to be built across the lower Columbia River, preceding the first road bridge, the nearby Interstate Bridge, by a little more than eight years.

The SP&S Class A-1 steam locomotives were a group of 5 identical locomotives. They were used in the rail yards at Portland, Oregon, and Vancouver, Washington, from 1907 to 1952. They were replaced with diesel-electric switch locomotives.

Spokane, Portland and Seattle Railway Class L-1 was a class of 4-4-0 steam locomotives built in 1889 by Schenectady Locomotive Works.

Spokane, Portland and Seattle Railway's Class L-2 was a class of 4-4-0 steam locomotives.

Spokane, Portland and Seattle Railway's Class L-3 was a class of 4-4-0 steam locomotives.

The Spokane, Portland and Seattle Railway (SP&S) class L-4 steam locomotives were originally used by the Astoria and Columbia River Railroad (AC&R). They became SP&S locomotives when the SP&S acquired the A&CR.

Spokane, Portland and Seattle Railway Class L-5 was a class of 4-4-0 steam locomotives built in 1897 by Schenectady Locomotive Works.

On the American Spokane, Portland and Seattle Railway, locomotive number 525 was the only steam locomotive in SP&S class O-2. It was originally built for Northern Pacific by the Schenectady Locomotive Works. Builders number 46878 was built in February 1910.

SS <i>Northern Pacific</i> United States passenger ship

SS Northern Pacific was built as a passenger ship at Philadelphia by William Cramp & Sons under supervision of the Great Northern Pacific Steam Ship Company for the Spokane, Portland and Seattle Railway Company. Northern Pacific, along with sister ship Great Northern, were built to provide a passenger and freight link by sea between the Great Northern Railway Lines and Spokane, Portland and Seattle Railway terminal at Astoria, Oregon and San Francisco beginning in spring of 1915. The ship was acquired on 17 September 1917 for use as a transport ship for the United States Navy during World War I, commissioned USS Northern Pacific and later, after transfer to the United States Army, as the Army transport USAT Northern Pacific. She was destroyed by fire in 1922.

<span class="mw-page-title-main">North Bank Depot Buildings</span> Historic buildings in Portland, Oregon, U.S.

The North Bank Depot Buildings, in central Portland, Oregon, United States, are a pair of buildings formerly used as a freight warehouse and passenger terminal for the Spokane, Portland and Seattle Railway (SP&S). Formed in 1905, the SP&S was commonly known as the North Bank Road during the period in which these buildings were in use. The Portland buildings' passenger facilities were also used by the Oregon Electric Railway after that railway was acquired by the SP&S. Located in what is now known as the Pearl District, the buildings were listed on the National Register of Historic Places in 1996. They were in use by the SP&S and its successor, Burlington Northern Railroad, from 1908 until the 1980s. Only the east building was used as a passenger station, and this usage lasted from 1908 until 1931.

<span class="mw-page-title-main">Oregon Slough Railroad Bridge</span> Railroad bridge in Portland, Oregon

The Oregon Slough Railroad Bridge, also known as the BNSF Railway Bridge 8.8, is a swing-span, through truss bridge in Portland, Oregon, United States. Currently owned and operated by BNSF Railway, it crosses an anabranch of the Columbia River known as North Portland Harbor and historically as the Oregon Slough. The bridge's northern end is on Hayden Island, which, along with Tomahawk Island, forms the north shore of the channel. Completed in 1908, the two-track bridge is one of only two swing bridges surviving in Portland, which once had several bridges of that type, both for road and rail traffic. The only other remaining swing bridge in the Portland area is another rail-only bridge on the same line, BNSF's nearby Bridge 9.6, spanning the Columbia River.

<i>Expo 74</i> (train)

The Expo '74 was a passenger train operated by Amtrak between Spokane and Seattle, Washington. It operated in the summer months of 1974 in coordination with its namesake, Expo '74. With the addition of the Expo '74 to the Empire Builder and North Coast Hiawatha, Amtrak provided thrice-daily service between Seattle and Spokane, the highest level seen since Amtrak's formation and unmatched since.

Mock is an extinct town in Spokane County, in the U.S. state of Washington. The GNIS classifies it as a populated place.

References

  1. Gartner, John T. (1990). North Bank Road, The Spokane, Portland and Seattle Railway. WSU Press. p. 206.