SR USA class

Last updated

Southern Railway USA class
SR USA 0-6-0T 30073 Eastleigh MPD 70D, August 1966 (9969640295).jpg
USA class locomotive No. 30073 at Eastleigh MPD in August 1966.
Type and origin
Power typeSteam
DesignerCol. Howard G. Hill.
Builder
Model S100
Build date1942-43
Specifications
Configuration:
   Whyte 0-6-0 T
   UIC C n2t
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.55.2 in (1.402 m)
Wheelbase 10 ft 0 in (3.05 m)
Length29 ft 8 in (9.04 m)
Loco weight46 long tons 10 cwt (47.2 t; 52.1 short tons)
Fuel type Coal
Fuel capacity17.8 short hundredweight (0.81  t; 0.79 long tons)
Water cap.1,000 imp gal (4,500 L; 1,200 US gal)
Boiler pressure210  psi (1.45  MPa)
Cylinders Two, outside
Cylinder size 16+12 in × 24 in (419 mm × 610 mm)
Valve gear Walschaerts
Valve type8 in (203 mm) piston valves
Performance figures
Tractive effort 21,630 lbf (96.22 kN)
Career
Operators
Class SR: USA
Power classBR: 3F
Number in class14 (plus one bought for spares)
NicknamesYank Tanks
Locale Southampton Docks
Withdrawn1962–1967
Preserved30064, 30065, 30070, 30072, others of base S100 class
DispositionFour preserved, remainder scrapped
Sources: [1] [ page needed ] and [2]

The SR USA class are some ex-United States Army Transportation Corps S100 Class steam locomotives purchased and adapted by the Southern Railway (SR) after the end of the Second World War to replace the LSWR B4 class then working in Southampton Docks. SR staff nicknamed them "Yank Tanks". [3] [4]

Contents

Origins

The United States Army Transportation Corps built 382 S100 Class 0-6-0 tank engine for use in the Second World War. They were shipped to the British War Department in 1943, and stored awaiting the invasion of Mainland Europe. Most went overseas but some remained in store. [2]

By 1946 the SR needed either to renew or replace the ageing B4, D1 and E1 class tanks used in Southampton Docks, but Eastleigh Works was not in a position to do so in a timely manner or at an economic price. The replacement locomotives would need to have a short wheelbase to negotiate the tight curves found in the dockyard, but be able to haul heavy goods trains as well as full-length passenger trains in the harbour area. [1] [ page needed ] The railway's Chief mechanical engineer, Oliver Bulleid therefore inspected the surplus War Department tank locomotives. The Hunslet Austerity 0-6-0ST locomotives stored at the Longmoor Military Railway proved to be unsuitable for dock work because of their 11 ft 0 in (3.35 m) wheelbase and inside cylinders, and also many of the survivors were in poor condition. [2] However, the S100s stored at Newbury Racecourse had a 10 ft 0 in (3.05 m) wheelbase, outside cylinders and had hardly been used. Those available for sale had been built by the Vulcan Iron Works of Wilkes-Barre Pennsylvania and H. K. Porter, Inc, of Pittsburgh.

Bulleid therefore took Vulcan-built locomotive WD4236 [5] on approval in May 1946 and tested it thoroughly over the next few months. When it was found to be suitable, this locomotive and a further thirteen were purchased in 1947 for £2500 each. [5] Six of these had been built by Porter and the remainder by Vulcan. However, when it was discovered that there were differences in dimensions between the locomotives from different builders the SR exchanged its Porter built locomotives for Vulcans, but could only do so with five examples. The railway therefore accepted one Porter locomotive at a reduced price and purchased another to provide spare parts. [2] Thus, the thirteen further locomotives entered traffic between April and November 1947 as soon as they had been adapted.

Construction and adaptation

Original drawings for the S100, dated 29 November 1941. S100Design.png
Original drawings for the S100, dated 29 November 1941.

Following purchase, members of the class were fitted with steam heating, vacuum ejectors, sliding cab windows, additional lamp irons and new cylinder drain cocks. [6] [1] [ page needed ] Further modifications became necessary once the locomotives started to enter traffic, including large roof-top ventilators, British-style regulators (as built they had US-style pull-out ones), three rectangular cab-front lookout windows, extended coal bunkers, separate steam and vacuum brake controls and wooden tip-up seats. This meant that it took until November 1947 for the entire class to be ready for work. [7] [8] Radio-telephones were later installed on the footplate to improve communication on the vast network of sidings at Southampton. [8]

The class was allocated the British Railways (BR) power classification 3F following nationalisation in 1948.

Numbering

The original locomotive carried the War Department number 4326, and the subsequent purchase were numbered between 1264 and 1284 and between 1952 and 1973. Thirteen of the locomotives were re-numbered in a single sequence from 61 to 73 by SR but 4326 retained its War Department number. The locomotive used for spares was not numbered. After 1948 they were renumbered 30061–30074 by BR. Six examples were transferred to departmental (non-revenue earning) use in 1962/3 and renumbered DS233–DS238.

Livery

During the Second World War they were painted USATC black with white numbering and lettering 'Transportation Dept.' on the tank sides. Prior to nationalisation, the locomotives were painted in Southern black livery with 'Southern' in "Sunshine Yellow" lettering. The lettering on the tank sides was changed to 'British Railways' during 1948 as a transitional measure. Finally, the class was painted in BR Departmental Malachite livery, with BR crests on the water tank sides and numbers on the cab sides.

Operational details

30069 at Eastleigh Works in 1966 30069 USA Class at Eastleigh Works.jpg
30069 at Eastleigh Works in 1966

For fifteen years the entire class was used for shunting and carriage and van heating in Southampton Docks. They performed well and were popular with the footplatemen, but the limited bunker capacity often necessitated the provision of relief engines for some of the longer duties. Two examples were fitted with extended bunkers to address this problem in 1959 and 1960, but a more ambitious plan to extend the frames and build larger bunkers was abandoned in 1960 due to the imminent dieselization of the docks. [9] They also often suffered from overheated axleboxes which was less of a problem when shunting but prevented them from being used on longer journeys. [8]

A more serious issue was the condition of the steel fireboxes originally fitted to the class which rusted and fatigued quickly. This was partly due to their construction under conditions of austerity, and the hard water present in the docks. This came to a head in 1951 when several had to be laid aside until new fireboxes could be constructed. [8] [1] [ page needed ] Thereafter there were no further problems.

The class was replaced from their shunting duties at Southampton from 1962 by British Rail Class 07 diesel-electric shunters, when the first member of the class was withdrawn, but the remainder were still in fairly good condition. The survivors were used for informal departmental purposes such as providing steam heating at Southampton or shunting at Eastleigh Motive Power Depot, before the withdrawal. 30072 [5] became the pilot locomotive at Guildford Motive Power Depot and continued to carry out this duty until the end of steam on the Southern in July 1967. [5] Six examples were officially transferred to ‘departmental’ duties and renumbered. These went to Redbridge Sleeper Depot (DS233), Meldon Quarry (DS234), Lancing Carriage Works (DS235 and DS236), and Ashford wagon works (DS237 and DS238; where they were named Maunsell and Wainwright ). [10]

Nine examples remained in service until March 1967 [11] and five of these survived until the end of steam on the Southern Region four months later. [1] [ page needed ] Two of these engines, 30065/DS237 and 30070/DS238, were sold to Woodham Brothers in South Wales in March 1968. However, before they could make their journey, their bearings ran hot and were declared "unfit for travel" which lead to the two tank engines being dumped at Tonbridge. Five months later, they were taken to Rolvenden where they were purchased for preservation. [12] [13] [14]

Stock list

USATC No.SR No.BR No.Dept No.BuilderYearWithdrawnNotes
12646130061DS 233Porter 74201942March 1967
12776230062DS 234Vulcan 43751942March 1967
12846330063Vulcan 43821942May 1962Withdrawn due to collision damage
19596430064Vulcan 44321943July 1967Preserved
19686530065DS 237Vulcan 44411943August 1965Preserved
12796630066DS 235Vulcan 43771942August 1965
12826730067Vulcan 43801942July 1967
19716830068Vulcan 44441943June 1964
19526930069Vulcan 44251943July 1967
19607030070DS 238Vulcan 44331943October 1962Preserved
19667130071Vulcan 44391943July 1967
19737230072Vulcan 44461943July 1967Preserved
19747330073Vulcan 44371943December 1966
432674*30074DS 236Vulcan 44881943August 1965Never carried SR number [15]

Preservation

Former 30070 in preservation with Longmoor Military Railway livery USA Class 30070.JPG
Former 30070 in preservation with Longmoor Military Railway livery

Four British examples of the USA class have been preserved:

Two JŽ class 62 locomotives built by the former Yugoslav Railways to foreign design have been acquired for use on the North Dorset Railway and given British liveries. There are minor technical differences.

In fiction

An engine of this class appears in the Thomas & Friends TV series as Rosie. [18]

Related Research Articles

<span class="mw-page-title-main">0-6-0</span> Locomotive wheel arrangement

0-6-0 is the Whyte notation designation for steam locomotives with a wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles, and no trailing wheels. Historically, this was the most common wheel arrangement used on both tender and tank locomotives in versions with both inside and outside cylinders.

<span class="mw-page-title-main">British Rail Class 07</span>

The British Rail Class 07 diesel locomotive is an off-centre cab 0-6-0 diesel-electric shunter type built by Ruston & Hornsby in 1962 for the Southern Region of British Railways. The 14 members of the class were primarily used at Southampton Docks and later also at Eastleigh Works.

The Southern Railway took a key role in expanding the 660 V DC third rail electrified network begun by the London & South Western Railway. As a result of this, and its smaller operating area, its steam locomotive stock was the smallest of the 'Big Four' companies.

<span class="mw-page-title-main">BR Standard Class 4 2-6-4T</span>

The British Railways Standard Class 4 tank is a class of steam locomotive, one of the BR standard classes built during the 1950s. They were used primarily on commuter and outer suburban services. They were capable of reaching speeds of 75 mph (121 km/h).

<span class="mw-page-title-main">SR Z class</span>

The SR Z class was an 0-8-0T 3-cylinder tank engine designed by Richard Maunsell and intended for heavy shunting on the Southern Railway, the first eight entering into service in 1929. It was a successful design and would have been built in greater numbers, but an order for a further ten was cancelled in 1930 due to the reduction in freight traffic as a result of the Great Depression.

<span class="mw-page-title-main">USATC S100 Class</span>

The United States Army Transportation Corps (USATC) S100 Class is a 0-6-0 steam locomotive that was designed for switching (shunting) duties in Europe and North Africa during World War II. After the war, they were used on railways in Austria, China, Egypt, France, Great Britain, Greece, Iran, Iraq, Israel, Italy, the Netherlands, Palestine, the United States, and Yugoslavia.

<span class="mw-page-title-main">Hunslet Austerity 0-6-0ST</span> Class of steam locomotive

The Hunslet Austerity 0-6-0ST is a class of steam locomotive designed by Hunslet Engine Company for shunting. The class became the standard British shunting locomotive during the Second World War, and production continued until 1964 at various locomotive manufacturers.

<span class="mw-page-title-main">LB&SCR A1 class</span> Class of British 0-6-0T steam locomotives

The London, Brighton and South Coast Railway (LB&SCR) A1 class is a class of British 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton railway works. The class has received several nicknames, initially being known as "Rooters" by their south London crews. However, the engines were more famously known as "Terriers" on account of the distinctive 'bark' of the exhaust beat. Later in their careers, some engines were known as "Hayling Billy" on account of their work on the Hayling Island branch line. A pub of this name on the island was briefly home to the engine which is now No. W8 Freshwater.

<span class="mw-page-title-main">GER Class S56</span>

The GER Class S56 was a class of 0-6-0T steams designed by James Holden for the Great Eastern Railway. Together with some rebuilt examples of GER Class R24, they passed to the London and North Eastern Railway at the grouping in 1923, and received the LNER classification J69.

<span class="mw-page-title-main">LSWR B4 class</span>

The London and South Western Railway B4 class is a class of 0-4-0 tank engines originally designed for station piloting and dock shunting. They were later used extensively in Southampton Docks for nearly half a century.

<span class="mw-page-title-main">SECR P class</span>

The South Eastern and Chatham Railway (SECR) P class is a class of 0-6-0T steam locomotive designed by Harry Wainwright.

<span class="mw-page-title-main">NLR Class 75</span>

The North London Railway Class 75 is a class of 0-6-0T steam locomotive.

<span class="mw-page-title-main">LB&SCR E2 class</span> Steam locomotive class

The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of 0-6-0T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.

<span class="mw-page-title-main">NER Class H</span>

The North Eastern Railway (NER) Class H, classified as Class Y7 by the London and North Eastern Railway (LNER) is a class of 0-4-0T steam locomotives designed for shunting.

<span class="mw-page-title-main">SR E1/R class</span>

The Southern Railway E1/R is a class of 0-6-2T tank steam locomotive designed for light passenger and freight duties. They were rebuilt from earlier LB&SCR E1 class 0-6-0T locomotives originally built 1874–1883. The rebuilt locomotives were intended to be used in the West of England.

<span class="mw-page-title-main">LB&SCR E1 class</span>

The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.

<span class="mw-page-title-main">GER Class 209</span>

The GER Class 209 was a class of 0-4-0 saddle tank steam locomotives of the Great Eastern Railway. These locomotives were similar to the NBR G Class but had flat-topped, instead of round-topped, tanks. A total of eight were built – four by Neilson and Company in 1874 and four more by the GER's Stratford Works between 1897 and 1903.

<span class="mw-page-title-main">LSWR G6 class</span>

The LSWR G6 class was an 0-6-0T tank locomotive designed by William Adams for the London and South Western Railway.

<span class="mw-page-title-main">GER Class C72</span>

The GER Class C72 was a class of thirty 0-6-0T steam locomotives designed by A. J. Hill for the Great Eastern Railway. They passed to the London and North Eastern Railway (LNER) at the 1923 grouping and received the LNER classification J68.

<span class="mw-page-title-main">North Dorset Railway</span>

North Dorset Railway is a heritage railway based at Shillingstone railway station on the former Somerset and Dorset Joint Railway in the United Kingdom.

References

  1. 1 2 3 4 5 Longworth 2005.
  2. 1 2 3 4 Bradley 1975, p. 66.
  3. "USA 0-6-0T". Southern Railway E-Group. Retrieved 3 November 2018.
  4. "Yank Tanks in Southampton". 25 May 2018. Retrieved 10 August 2022 via PressReader.
  5. 1 2 3 4 Ballantyne, Hugh (1985). Southern steam in colour. London: Jane's publishing company Ltd. p. 15. ISBN   0-7106-0336-3.
  6. Tourret 1995, pp. 213–214.
  7. Tourret 1995, p. 214.
  8. 1 2 3 4 Bradley 1975, p. 67.
  9. Bradley 1975, p. 68.
  10. Kidner 1993, p. 61.
  11. Bradley 1975, p. 70.
  12. Glasspool, David. "SR USA Class 0-6-0T". Kent Rail. Retrieved 15 November 2020.
  13. "30065 (WD 1968, SR 65, BR DS 237 & BR 30065)". Preserved British Steam Locomotives. WordPress.com. 21 June 2017. Retrieved 15 November 2020.
  14. "30070 (WD 1960, SR 70, BR DS 238 & BR 30070)". Preserved British Steam Locomotives. WordPress.com. 21 June 2017. Retrieved 15 November 2020.
  15. "SREmG".
  16. "New home for Bluebell Railway's USA Dock Tank steam locomotive". 8 June 2022.
  17. 1 2 "Home". Project 62. Archived from the original on 7 July 2013. Retrieved 24 May 2016.
  18. "Rosie - Character Profile & Bio". Thomas & Friends - Official Website. Archived from the original on 27 June 2017. Retrieved 26 August 2017.

Further reading