Sea Fighter (FSF-1)

Last updated

US Navy 050801-N-7676W-080 The Littoral Surface Craft-Experimental LSC(X), developed by the Office of Naval Research and christened Sea Fighter (FSF 1), arrives at her new homeport of San Diego Calif.jpg
Sea Fighter (FSF-1)
History
Flag of the United States.svgUnited States
NameSea Fighter
Ordered15 February 2003
BuilderNichols Bros. Boat Builders, Freeland, Washington [1]
Costbetween $180 and $220 million [2]
Laid down5 June 2003
Launched10 February 2005
Christened7 February 2005
In service31 May 2005 [3]
IdentificationFSF-1
StatusIn active service
General characteristics
TypeExperimental littoral combat ship
Displacement1,600 tons
Length262 ft (79.9 m)
Beam72 ft (21.9 m)
Draft11.5 ft (3.5 m)
PropulsionCombined diesel or gas turbine
Speed55 knots (102 km/h)
Range4,400 nautical miles (8,100 km)
Complement4 officers, 22 enlisted (Navy and Coast Guard)
Aviation facilities2 helipads, UAV capable

Sea Fighter (FSF-1) is an experimental littoral combat ship in service with the United States Navy. Its hull is of a small-waterplane-area twin-hull (SWATH) design, provides exceptional stability, even on rough seas. The ship can operate in both blue and littoral waters. For power, it can use either its dual gas-turbine engines for speed or its dual diesel engines for efficient cruising. It can be easily reconfigured through the use of interchangeable mission modules. [4] Helicopters can land and launch on its deck. Smaller water craft can be carried and launched from its stern. The vessel is being developed under the program title Littoral Surface Craft-Experimental (LSC(X)) with a hull type designation Fast Sea Frame. The first vessel has been assigned the hull classification symbol FSF 1 [3] and also has been referred to as the X-Craft. The vessel was designed by British company BMT Nigel Gee Ltd (formerly BMT Nigel Gee and Associates Ltd) who continue with a role in the development of the vessel. [5] [6]

Contents

Description

A helicopter lands on Sea Fighter underway Sea Fighter FSF-1.jpg
A helicopter lands on Sea Fighter underway

Sea Fighter's hull is a small-waterplane-area twin hull (SWATH) design, constructed out of aluminum.

With twin gas turbine engines, quad water jets, and streamlined hulls, Sea Fighter is capable of speeds of 50 knots (90 km/h) and greater. It is designed to be a sea frame that can carry interchangeable mission modules resembling shipping containers. These modules allow it to be easily reconfigured to meet a variety of mission requirements, including mine warfare, anti-submarine operations, amphibious assault support, surface warfare, transport and logistical missions, cruise-missile launch, and special-forces interdiction operations. The mission modules are easily loaded and stored on Sea Fighter's inner deck.

The vessel has the capability of launching small craft up to 11 metres (36 ft) in length from the stern, including assault craft and submersibles by means of a custom dual-purpose ramp that also enables RORO operations for HMMWV and other vehicles. The vessel also has a twin-pad helicopter deck capable of operating aircraft up to the size of an H-60 type, including unmanned aerial vehicles, and landing helicopters while travelling at speeds of up to 50 knots (90 km/h). A special deck-lighting system has been developed for Sea Fighter using low-intensity green lighting around the vessel's edges and helipads. This lighting is particularly effective when using night-vision goggles, making landings on the vessel easier than on conventional warships, even at the higher speeds in which Sea Fighter operates.

The basic design has a displacement of 1,100 tons while measuring 79.9 metres (262 ft) long at waterline and 22 metres (72 ft) broad. Power is provided by a CODOG arrangement comprising two MTU 595 diesel engines and two LM2500 gas turbines. Diesel power is used for cruising while the turbines provide high-power output for high-speed operation. The two gas turbines power the vessel's four water jets, drawing water from the bottom stern of each hull and powering it through large water turbines, which are responsible for the vessel's high operating speed. Each water jet has thrust vectoring and thrust reversers making it possible to move sideways while docking, or even travelling in astern. Thrust vectoring also makes it possible for Sea Fighter to make evasive maneuvers while travelling at high speed. This would prevent the craft from being forced to shore or into the path of enemy vessels.

Sea Fighter's forward superstructure consists of a bridge on the lower deck, and a flight operations station on top. The bridge is relatively small, and generally manned by a crew of three. The bridge control stations incorporate glass displays using the modern navigational aids to assist Sea Fighter in patrolling coastal areas while operating at high speed. Above the bridge is a small flight-operations station with room for only one operator. This glass-enclosed station provides an unobstructed view of the entire flight deck and allows the operator to coordinate the approach and landing of helicopters, and loading of the vessel's mission containers, as well as providing visual aid for navigation.

The ship has a computer system to control its systems and for navigation. Steering and throttle control are done by wire rather than mechanical linkage.

The first vessel of the type (FSF 1) was constructed at the Nichols Bros. Boat Builders shipyard at Freeland, Washington, under contract to Titan Corporation, a subsidiary of L-3 Communications. [1] [7] [8] Nichols Shipyard was selected because of their previous experience in the construction of aluminium-hulled high-speed ferries.

Role

Sea Fighter is destined for employment by the Office of Naval Research as a testbed for technologies related to the Navy's littoral combat ship effort, as well as direct testing of the hull design. Once trials are completed, the Navy will have the option of outfitting the vessel for operational deployment.

Future development

Sea Fighter in San Diego with USS Rentz Rentz and FSF-1.jpg
Sea Fighter in San Diego with USS Rentz

The Navy and Coast Guard are jointly exploring the possibility of further development of Sea Fighter–type vessels for use in patrolling U.S. coastal waters. With an effective range of 4,400 nautical miles (8,100 km) unrefueled, the type could also be deployed quickly overseas. Sea Fighter is expected to pave the way for a future line of fast, long-range destroyers capable of travelling fast enough to avoid or outmaneuver most of the current generation of torpedoes. Such vessels would be capable of crossing the Atlantic Ocean unrefueled, and have a very low radar signature, making detection difficult. They would be able to respond quickly to targets located by air or satellite and aggressively attack surface and submerged vessels using their speed to evade torpedo and missile attack.[ citation needed ]

Concerns

Some concern has been raised with regard to the use of aluminium alloys almost exclusively in the construction of Sea Fighter's hull, as well as future vessels based on the design. While aluminum alloys have a high specific strength, they melt at a lower temperature than steel. Some lay concern has been expressed about aluminum hulls actually burning, but only aluminum dust or powder is considered flammable. [9] Additionally galvanic corrosion may result between the aluminum hull and steel fittings, as happened to the littoral combat ship USS Independence.[ citation needed ]

See also

Related Research Articles

The United States Navy, United States Coast Guard, and United States National Oceanic and Atmospheric Administration (NOAA) use a hull classification symbol to identify their ships by type and by individual ship within a type. The system is analogous to the pennant number system that the Royal Navy and other European and Commonwealth navies use.

<span class="mw-page-title-main">Corvette</span> Small warship

A corvette is a small warship. It is traditionally the smallest class of vessel considered to be a proper warship. The warship class above the corvette is that of the frigate, while the class below was historically that of the sloop-of-war.

<span class="mw-page-title-main">Warship</span> Ship that is built and primarily intended for naval warfare

A warship or combatant ship is a naval ship that is built and primarily intended for naval warfare. Usually they belong to the armed forces of a state. As well as being armed, warships are designed to withstand damage and are typically faster and more maneuverable than merchant ships. Unlike a merchant ship, which carries cargo, a warship typically carries only weapons, ammunition and supplies for its crew. Warships usually belong to a navy, though they have also been operated by individuals, cooperatives and corporations.

<span class="mw-page-title-main">Littoral combat ship</span> Ship designed for operations near shore

The littoral combat ship (LCS) is either of two classes of relatively small surface vessels designed for operations near shore by the United States Navy. It was "envisioned to be a networked, agile, stealthy surface combatant capable of defeating anti-access and asymmetric threats in the littorals", although their ability to perform these missions in practice has been called into question.

<span class="mw-page-title-main">Patrol boat</span> Small naval vessel

A patrol boat is a relatively small naval vessel generally designed for coastal defence, border security, or law enforcement. There are many designs for patrol boats, and they generally range in size. They may be operated by a nation's navy, coast guard, police, or customs, and may be intended for marine, estuarine, or river environments.

<span class="mw-page-title-main">Small-waterplane-area twin hull</span> Ship configuration with submerged twin-hulls

A small waterplane area twin hull, better known by the acronym SWATH, is a catamaran design that minimizes hull cross section area at the sea's surface. Minimizing the ship's volume near the surface area of the sea, where wave energy is located, minimizes a vessel's response to sea state, even in high seas and at high speeds. The bulk of the displacement necessary to keep the ship afloat is located beneath the waves, where it is less affected by wave action. Wave excitation drops exponentially as depth increases, so wave action normally does not affect a submerged submarine at all. Placing the majority of a ship's displacement under the waves is similar in concept to creating a ship that rides atop twin submarines.

<i>Sea Shadow</i> (IX-529) American experimental stealth ship

Sea Shadow (IX-529) was an experimental stealth ship built by Lockheed for the United States Navy to determine how a low radar profile might be achieved and to test high stability hull configurations that have been used in oceanographic ships.

<span class="mw-page-title-main">Stealth ship</span> Ship which uses stealth technology to reduce risk of detection

A stealth ship is a ship that employs stealth technology construction techniques in an effort to make it harder to detect by one or more of radar, visual, sonar, and infrared methods.

A joint support ship (JSS) is a multi-role naval vessel capable of launching and supporting joint amphibious and airlift operations. It can also provide command and control, sealift and seabasing, underway replenishment, disaster relief and logistics capabilities for combined land and sea operations.

USS <i>Independence</i> (LCS-2) Independence-class littoral combat ship

USS Independence (LCS-2) is the lead ship of the Independence-class of littoral combat ships. She is the sixth ship of the United States Navy to be named for the concept of independence. The design was produced by the General Dynamics consortium for the Navy's LCS program, and competes with the Lockheed Martin designed Freedom variant.

<span class="mw-page-title-main">People's Liberation Army Navy Surface Force</span> Surface warfare branch of the Peoples Liberation Army Navy

The People's Liberation Army Navy Surface Force is the surface warfare branch of China's People's Liberation Army Navy (PLAN), consisting of all surface vessels in operational service with the PLAN. The PLAN Surface Force operates 661 ships organized into three fleets: the North Sea Fleet, the East Sea Fleet and the South Sea Fleet.

<span class="mw-page-title-main">MILGEM project</span> National warship program of Turkey

MILGEM project is a national warship program of the Republic of Turkey. Managed by the Turkish Navy, the project aims at developing multipurpose corvettes, frigates and destroyers that can be deployed in a range of missions, including reconnaissance, surveillance, early warning, anti-submarine warfare, surface-to-surface and surface-to-air warfare, and amphibious operations.

<i>HST-2</i>

HST-2, formerly named USNS Puerto Rico and Alakai, is a vessel owned by the United States Navy Military Sealift Command. She was originally Hawaii Superferry's first high-speed ferry. The vessel was later chartered by Bay Ferries Limited to operate a ferry service between Maine and Yarmouth, Nova Scotia.

<i>Sea Slice</i> Experimental SWATH vessel

HSV Sea Slice was an experimental vessel, built by Lockheed Martin, for the United States Navy, later used in commercial service.

<i>Independence</i>-class littoral combat ship US Navy small coastal combat ships

The Independence class is a class of littoral combat ships built for the United States Navy.

<i>Freedom</i>-class littoral combat ship Class of American littoral combat ships

The Freedom class is one of two classes of the littoral combat ship program, built for the United States Navy.

USS <i>Coronado</i> (LCS-4) Independence-class littoral combat ship

USS Coronado (LCS-4) is an Independence-class littoral combat ship. She is the third ship of the United States Navy to be named after Coronado, California.

<i>Spearhead</i>-class expeditionary fast transport US navy catamaran

The Spearhead-class expeditionary fast transport (EPF) is a United States Navy–led shipbuilding program to provide a high-speed, shallow draft vessel intended for rapid intra-theater transport of medium-sized cargo payloads. The EPFs can reach speeds of 35–45 knots (65–83 km/h; 40–52 mph), and allow the rapid transit and deployment of conventional or special forces, equipment and supplies. The vessels are a part of Military Sealift Command's Sealift Program. The class was previously designated as "Joint High Speed Vessel (JHSV)", and redesignated in September 2015.

Juliet Marine Systems Ghost is an advanced super-cavitating stealth ship that can reduce hull friction to 1/900th that of conventional watercraft. It was developed to provide superior protection and capabilities for United States military personnel. It was designed, developed, and built by the private American company Juliet Marine Systems.

References

  1. 1 2 "Sea Fighter for the U.S. Navy". Nichols Bros. Boat builders. Archived from the original on 30 April 2012. Retrieved 2 March 2008.
  2. "Sea Fighter (FSF 1) Fast Sea Frame Littoral Surface Craft-Experimental LSC(X)". Global Security.
  3. 1 2 "SEA FIGHTER (FSF 1)". U.S. Naval Vessel Register. U.S. Navy. 20 April 2007. Retrieved 2 March 2008.
  4. Journalist 3rd Class (SW) Nick Young (3 August 2005). "Navy Sea Fighter Makes San Diego Home (Story Number: NNS050803-02)". U.S. Navy. Retrieved 2 March 2008.
  5. BMT Technical paper on the project. http://media.bmt.org/bmt_media/resources/29/Paper49-TheX-Crafta73mExperimentalPlatformfortheUSNavy.pdf
  6. Design specifications, plans and images. http://media.bmt.org/bmt_media/resources/29/NG427-SeaFighterFSF1.pdf
  7. "U.S. Navy's Littoral Surface Craft – Experimental (X-Craft) Successfully Completes Sea Trials". L3 Communications, Titan Group. 6 July 2005. Retrieved 2 March 2008.
  8. "Fast Sea Frame – FSF". U.S. Navy Fact File. 24 February 2005. Retrieved 2 March 2008.
  9. "Aluminum". Health Guidelines. United States Department of Labor Occupational Safety & Health Administration. Retrieved 24 February 2009..