Last updated
A Caucasian/Circassian shashka Sabel, schaschka - Livrustkammaren - 1315 (cropped).tif
A Caucasian/Circassian shashka

The shashka (Adyghe : сэшхуэ, [saʃxʷa] long-knife) (Russian : and Ukrainian шашка) or shasqua, is a kind of sabre; single-edged, single-handed, and guardless backsword. In appearance, the shashka is midway between a typically curved sabre and a straight sword. It has a slightly curved blade, and can be effective for both cutting and thrusting.



The shashka originated among the mountain tribes of the Caucasus, the earliest depictions of this sword date to the late 17th century, though most extant shashkas have hilts dating to the 19th century. [1] The earliest datable example is from 1713. Later, most of the Russian and Ukrainian Cossacks adopted the weapon. Two styles of shashka exist: the Caucasian/Circassian shashka and the Cossack shashka. In 1834 the Russian government produced the first military-issue shashka pattern. [2]

The blades of non-regulation shashkas were of diverse origins, some were locally made in the Caucasus, others in Russia, some were manufactured in Germany, mostly in Solingen, and displayed imitations of the 'running wolf' mark of Passau. [3]

The typically Circassian (Adyghe) form of sabre was longer than the Cossack type, in fact the Russian word shashka originally came from the Adyghe word – Adyghe : Cэшхуэ (Sashko) – meaning "long knife". It gradually replaced the sabre in all cavalry units except hussars during the 19th century. [4]

Russian troops, having encountered it during their conquest of the Caucasus (1817–1864), preferred it to their issued sabres.

At this time there were three types of non-regulation shashka:

The first officially regulated Russian military shashka was the 1834 pattern, also called the “Nizhegorodka”. This was followed by the 1838 pattern shashka. In 1881, two patterns were introduced: a 'Cossack' pattern, which was typical in not having a guard, and a 'dragoon' pattern, which was much more like a standard sabre in having a brass knucklebow, and was derived from the 1841 dragoon sabre. The blades of the two types were, however, essentially identical. [5]

The Cossack Hosts (not full-time regiments) used non-regulation shashkas until 1904, when they received their own regulation pattern. [6]

The Communist government introduced the 1927 pattern, which was very similar to the 1881 Cossack pattern; production of this pattern continued until 1946. The last pattern shashkas to be introduced were the 1940 patterns for 'line commanding personnel' and generals - both had knucklebows. [7]


Reproduction of an 1881 pattern 'Cossack' shashka Shashka.jpg
Reproduction of an 1881 pattern 'Cossack' shashka
Hilt of an 1881 pattern 'Dragoon' shashka (and revolver) TKU 33.jpg
Hilt of an 1881 pattern 'Dragoon' shashka (and revolver)

The shashka was a relatively short sabre, typically being 80 to 100cm (31.5 to 39in.) in total length. It had a slightly curved, fullered, blade with a single edge, the back of the blade was often sharpened for the 3rd. of the blade nearest the tip (a false edge). The hilt had no guard (except for Russian Dragoon 'shashka' patterns, which had a brass knucklebow and quillon, and a conventional sabre pommel). The pommel was hook-shaped and divided into two 'ears'. This is a feature found in many weapons of the Western Asian highlands, from the Turkish yataghan to the Afghan pesh-kabz. The sword was worn in a scabbard suspended with the edge uppermost. The Caucasian form of the shashka had a scabbard which enclosed most of the hilt, with little more than the hooked pommel protruding. [8]

Plainer, non-regulation shashkas often had hilts of horn, more highly decorated examples had hilts sheathed in niello-inlaid silver, with scabbard mounts to match. Russian military shashkas were much plainer, with hilts typically consisting of a brass ferrule, ribbed wooden grip and brass pommel. Unlike traditional non-regulation shashkas, the pommel of pattern shashkas was pierced to receive a sword-knot. The pommel was decorated with an imperial insignia; following the 1917 revolution this was often ground off. Shashkas manufactured under the Soviet regime (Pattern 1927) had Communist symbols in place of the imperial ones. Later trooper models often had modified brass scabbard furniture to hold a bayonet for the Mosin–Nagant carbine. Officer's models, though of similar construction, did not have an attached bayonet, and were much more heavily decorated. In Tsarist times officers had considerable freedom in the decoration of their shaskas and some had non-regulation blades. [9]

The 1834 pattern shashka was a popular weapon, when it was replaced by the 1881 pattern, several regiments complained so vociferously that their 1834s were returned to them. [10]

The 1838 Pattern - typical statistics for a pattern sword:

Total length: 1030mm

Blade length: 875mm

Blade width: 36mm

Blade curvature: 62/375mm

Point of balance: 170-180mm

Weight: 1067g [11]


There is little or no surviving contemporary written information on how the people of the Caucasus used the shashka. However, surviving Russian military manuals indicate that, despite the lack of protection for the hand, the military shashka was used in much the same manner as a Western European sabre, with very similar cuts, thrusts, guards and parries. In particular, Russian soldiers were not taught to cut in one movement from unsheathing, whatever Caucasus traditions suggest. [12]

Related Research Articles

A sword is a bladed melee weapon intended for cutting or thrusting that is longer than a knife or dagger, consisting of a long blade attached to a hilt. The precise definition of the term varies with the historical epoch or the geographic region under consideration. The blade can be straight or curved. Thrusting swords have a pointed tip on the blade, and tend to be straighter; slashing swords have a sharpened cutting edge on one or both sides of the blade, and are more likely to be curved. Many swords are designed for both thrusting and slashing.

The yatagan or yataghan is a type of Ottoman knife or short sabre used from the mid-16th to late 19th centuries. The yatagan was extensively used in Ottoman Turkey and in areas under immediate Ottoman influence, such as the Balkans and the Caucasus.

Kampilan Sword

The kampilan is a type of single-edged sword, traditionally used by various ethnic groups in the Philippine archipelago. It has a distinct profile, with the tapered blade being much broader and thinner at the point than at its base, sometimes with a protruding spikelet along the flat side of the tip. The design of the pommel varies between ethnic groups, but it usually depicts either a bakunawa (dragon), a buaya (crocodile), a kalaw (hornbill), or a kakatua (cockatoo).


A kilij is a type of one-handed, single-edged and moderately curved scimitar used by the Timurid Empire, Mamluk Empire, Ottoman Empire, and the later Turkic Khanates of Central Asia and Eurasian steppes. These blades developed from earlier Turko-Mongol sabers that were in use in lands invaded or influenced by the Turkic peoples.

The talwar, also spelled talwaar and tulwar, is a type of curved sword or sabre from the Indian subcontinent.


Szabla is the Polish word for sabre.


A spadroon is a light sword with a straight-edged blade, enabling both cut and thrust attacks. This English term first came into use in the early 18th century, though the type of sword it referred to was in common usage during the late 17th century. They were primarily used as a military sidearm in the late 17th and early 18th centuries, and for officers and NCOs in the latter part of the 18th and early 19th centuries. The type of sword also saw widespread use across Europe and America, though the term ‘spadroon’ is unique to the Anglophone world.

Kalis Sword

A kalis is a type of double-edged Filipino sword, often with a "wavy" section, similar to a keris. Just like the keris, the kalis's double-edged blade can be used for both cutting and thrusting; except that the kalis is much larger than most keris, making it a sword rather than a dagger.

Pattern 1908 cavalry sword Type of cavalry sword

The 1908 Pattern Cavalry Trooper's Sword was the last service sword issued to the cavalry of the British Army. It has been called the most effective cavalry sword ever designed, although its introduction occurred as swords finally became obsolete as military weapons. In use, it, like other thrust-based cavalry swords, is best described as a one-handed lance, due to its complete lack of utility for anything but the charge. In fact, the closely related US Model 1913 Cavalry Saber was issued with only a saddle scabbard, as it was not considered to be of much use to a dismounted cavalryman. Colonial troops, who could expect to engage in melee combat with opposing cavalry frequently carried cut and thrust swords either instead of, or in addition to, the P1908/1912.

Model 1832 foot artillery sword Short-sword

The Model 1832 foot artillery sword was a 25-inch (64 cm) short-sword with a straight, double-edged blade and brass-mounted leather scabbard.

Gothic hilted British infantry swords (1822, 1827, 1845, 1854 and 1892 patterns)

The gothic hilted swords were a family of swords carried by officers and some NCOs of the British Army between 1822 and the present day. They were primarily infantry swords, although they were also regulation pattern for some other officers such as surgeons and staff officers. The term “Gothic hilt” is derived from a perceived similarity between the curved bars of the guard and the arches found in Gothic architecture. They were elegant aesthetically pleasing weapons, although they were considered by some to be mediocre fighting swords. The weapon and its variants had a very long service life.

The Pattern 1796 Light Cavalry Sabre is a sword that was used primarily by British light dragoons and hussars, and King's German Legion light cavalry during the Napoleonic Wars. It was adopted by the Prussians and used by Portuguese and Spanish cavalry.

1796 Heavy Cavalry Sword

The pattern 1796 Heavy Cavalry Sword was the sword used by the British heavy cavalry, and King's German Legion Dragoons, through most of the period of the Revolutionary and Napoleonic Wars. It played an especially notable role, in the hands of British cavalrymen, at the battles of Salamanca and Waterloo. The pattern was adopted by Sweden and was used by some Portuguese cavalry.

<i>Guntō</i> Japanese military sword, 1872-1945

The guntō was a ceremonial sword produced for the Imperial Japanese army and navy after the introduction of conscription in 1872.

Barong (sword) Sword or knife

The barong is a thick, leaf-shaped, single-edged blade sword. It is a weapon used by Muslim Filipino ethnolinguistic groups like the Tausug, Sama-Bajau, or Yakan in the Southern Philippines.

Basket-hilted sword Sword with basket-like hand protection

The basket-hilted sword is a sword type of the early modern era characterised by a basket-shaped guard that protects the hand. The basket hilt is a development of the quillons added to swords' crossguards since the Late Middle Ages. In modern times, this variety of sword is also sometimes referred to as the broadsword.


Kastane is a short traditional ceremonial/decorative single-edged Sri Lankan sword.

Bangkung Sword

The bangkung or bangkon, is a short sword originating in the Sulu Archipelago of the Philippines. The bangkung was used primarily by the Moro people of the Sulu and is not associated with Moros in other areas such as Mindanao, although it is sometimes found in coastal regions. The bangkung is a slashing weapon, meant to deliver hacking type blows. While the bangkung is a very effective sword, it was not popular unlike the panabas and the pirah and for this reason it is one of the most rarely found Moro edged weapons. Few were produced and even fewer survive.

Turko-Mongol sabers Type of Cavalry Sabre

These swords were used by the Turkic nomads of the Eurasian steppes primarily between the 9th and 14th centuries. One of the earliest recorded sabres of this type was recovered from an Avar grave in Romania dating to the mid 7th century. Although minor variations occur in size and hilt, they are common enough in design across 5 centuries that individual blades are difficult to date when discovered without other context.

The Pattern 1831 sabre for General Officers is a British army pattern sword prescribed for the use of officers of the rank of major-general and above. It has been in continuous use from 1831 to the present. It is an example of a type of sword described as a mameluke sabre.


  1. Rivkin, p. 21
  2. Urazbakhtin, pp. 126, 131-134
  3. Tarassuk and Blair, p. 420
  4. Urazbakhtin, p. 126
  5. Urazbakhtin, p. 135-137
  6. Urazbakhtin, p. 141
  7. Urazbakhtin, pp. 144-145
  8. Urazbakhtin, p. 126
  9. Urazbakhtin, p. 126-135, 144
  10. Urazbakhtin, p. 134
  11. Urazbakhtin, p. 136
  12. Urazbakhtin, pp. 146-168, summary 169


See also

Belarus-Minsk-National museum of history and culture of Belarus-Cold Steel-2.jpg