Survival suit

Last updated
Practicing with a survival suit Survival suit overview & practice.jpg
Practicing with a survival suit

A survival suit, more accurately and currently referred to as an immersion suit, is a type of waterproof dry suit intended to protect the wearer from hypothermia if immersed in cold water or otherwise exposed after abandoning a vessel, especially in the open ocean. Immersion suits usually have integral footwear, and a hood, and either built-in gloves or watertight wrist seals. Suits manufactured by several manufacturers also include an inflatable pillow which is permanently attached high on the back, or an inflatable tube that is attached with zippers at two points on the chest, each side of the main zipper, and circles the back. When inflated, both of these devices provide enhanced stability to the wearer, which, if conscious, allows them to keep the head above water, and to keep wind and seas from striking the face. The inflation tube is routed from the inflatable pillow over the left shoulder of the user, and secured in a loop on the chest.

Contents

Immersion suits with buoyancy aids are provided with buddy lines to allow multiple survivors to connect to one another in the water, to keep survivors together.

Some suits are manufactured with built-in hoisting lanyards, to allow easier retrieval from vessels with a higher freeboard that have hoisting capabilities.

The first record of a "survival suit" was in 1930 when a New York firm, American Life Suit Corporation, offered merchant and fishing firms what it called a safety suit for crews of ocean vessels. The suit came packed in a small box and was put on like a boilersuit. [1]

The precursor of these suits was invented in 1872 by Clark S Merriman to rescue steamship passengers. It was made from rubber sheeting and became famous by the swim records of Paul Boyton. It was essentially a pair of rubber pants and shirt cinched tight at the waist with a steel band and strap. Within the suit were five air pockets the wearer could inflate by mouth through hoses. Similar to modern-day dry suits, the suit also kept its wearer dry. This essentially allowed wearers to float on their backs, using a double-sided paddle to propel themselves, feet-forward. Additionally, they could attach a small sail to save energy while slowly drifting to shore (because neither emergency radio transmitters nor rescue helicopters had been invented yet). [2] [3]

The first immersion suit to gain USCG approval was invented by Gunnar Guddal. Eventually the suit became accepted as essential safety gear. [4] [5]

Usage

Immersion suits are of two types: Work suits are worn for long periods in high risk environments, and survival suits are worn during emergencies.

Work suits

This type is worn for long periods while working in circumstances where the risk of exposure is considered to be high. They are made in a variety of standard sizes and chosen to fit the wearer. They are often worn by deep-sea fishermen who work in cold water fishing grounds.

Some of these garments resemble diving drysuits. Others may have many of the features of an immersion suit.

Since humans are warm blooded and sweat to cool themselves, suits that are worn all the time usually have some method for sweat to evaporate and the wearer to remain dry while working.

Survival suits

The first 'survival suits' in Europe were invented by Daniel Rigolet, captain of a French oil tanker. Others had experimented on similar suits abroad.[ citation needed ]

Unlike work suits, "quick don" immersion suits are not normally worn for work, but are stowed in an accessible location on board the craft. The operator may be required to have one immersion suit of the appropriate size on board for each crew member, and other passengers. If an immersion suit is not accessible both from a crew member's work station and berth, then two accessible suits must be provided.[ citation needed ]

This type of immersion suit's flotation and thermal protection is usually better than an immersion protection work suit, and if the suit is properly maintained, should extend in-water survival for a person who is trained in its use.[ citation needed ]

An adult immersion suit is often a large bulky one-size-fits-all design meant to fit a wide range of sizes. Two types of materials are used. Neoprene suits, without additional insulation, and suits constructed of a trilaminate waterproof material, with a snap-in insulating liner made from thin foam sheets cut and glued to form the suit, with a rayon backing to make donning the suit easier. These suits typically have oversize booties to accommodate various foot sizes. Gloves may be built into the suit, or be stored in easy access pouches at the end of the sleeves. These suits have a waterproof zipper in front for access. The zippers must be properly maintained or the suit may not seal properly. There is generally a face flap to somewhat seal water out around the neck and protect the wearer from spray. Because of the oversized booties and large mittens, quick don immersion suits are often known as "Gumby suits", after the 1960s-era children's toy.[ citation needed ]

The integral gloves may be a thin waterproof non-insulated type to give the user greater dexterity during donning and evacuation, with a second insulating outer glove tethered to the sleeves to be worn while immersed.[ citation needed ]

A ship's captain (or master) may be required to hold drills periodically to ensure that everyone can quickly access the immersion suit storage in an emergency, and don the suit in the allotted amount of time. In the event of an emergency, it should be possible to put on an immersion suit in 60 seconds.[ citation needed ]

The Submarine Escape Immersion Equipment is a type of survival suit that can be used when escaping from a sunken submarine. The suit is donned before leaving the submarine and then inflated to act as a liferaft when the sailor reaches the surface.[ citation needed ]

Construction

Survival suits are normally made out of red, fluorescent orange, or yellow fire-retardant neoprene, for high visibility at sea. The neoprene material used is a synthetic rubber closed-cell foam, containing a multitude of tiny air bubbles making the suit sufficiently buoyant to also be a personal flotation device.

The seams of the neoprene suit are sewn and taped to make them waterproof, and the suit has strips of SOLAS specified retroreflective tape on the arms, legs, and head to help locate the wearer at night from a rescue aircraft or ship.

Open neck vs closed neck sealing

The method of waterproof sealing around the face can affect wearer comfort. Low-cost quick-donning suits typically have an open neck from chest to chin, closed by a waterproof zipper. However, the zipper is stiff and tightly compresses around the face resulting in an uncomfortable fit intended for short-duration use until the wearer can be rescued. The suit material is typically fairly stiff and the wearer is unable to look to the sides easily.[ citation needed ]

Suits intended for long-term worksuit use, or donned by rescue personnel, typically have a form-fitting neck-seal, with a hood that conforms to the shape of the chin. This design is both more comfortable and allows the wearer to easily turn their head and look up or down. The suit material is designed to be either loose or elastic enough to allow the wearer to pull the top of the suit up over their head and then down around their neck.

Safety accessories

Immersion suits can be equipped with extra safety accessories such as:

Inflatable survival suits

The inflatable survival suit is a special type of survival suit which is similar in construction to an inflatable boat, but shaped to wrap around the arms and legs of the wearer. This type of suit is much more compact in storage than a neoprene survival suit, and very easy to put on when deflated since it is just welded from plastic sheeting to form an air bladder.[ clarification needed ][ citation needed ]

Once the inflatable survival suit has been put on and zipped shut, the wearer activates firing handles on compressed carbon dioxide cartridges, which punctures the cartridges and rapidly inflates the suit. This results in a highly buoyant, rigid[ clarification needed ] shape that also offers very high thermal retention properties.

However, like an inflatable boat, the inflatable survival suit loses all protection properties if it is punctured and the gas leaks out. For this reason, the suit may consist of two or more bladders, so that if one fails, a backup air bladder is available.

Immersion suit maintenance

Each immersion suit needs to be regularly checked and maintained properly in order to be ready for use all the time. The maintenance of the immersion suits kept on board of the vessels must be done according to the rules of the International Maritime Organization (IMO). There are two Guidelines issued by IMO MSC/Circ.1047 [6] and MSC/Circ.1114 [7]  in relation to immersion suits' maintenance.

The first guideline gives instruction for monthly inspection and maintenance which must be done by the ship's crew. The second one specifies pressure testing which requires special equipment, and is usually done ashore by specialized companies, but can be done also on board the vessels if practical. Pressure testing must be performed every three years for immersion suits less than 12 years old counted from the suit's date of manufacture and every second year on older suits.

Images

Related Research Articles

<span class="mw-page-title-main">Snorkeling</span> Swimming while breathing through a snorkel

Snorkeling is the practice of swimming on or through a body of water while equipped with a diving mask, a shaped breathing tube called a snorkel, and usually swimfins. In cooler waters, a wetsuit may also be worn. The use of this equipment allows the snorkeler to observe underwater attractions for extended periods with relatively little effort and to breathe while face-down at the surface.

<span class="mw-page-title-main">Wetsuit</span> Garment for thermal insulation from water

A wetsuit is a garment worn to provide thermal protection while wet. It is usually made of foamed neoprene, and is worn by surfers, divers, windsurfers, canoeists, and others engaged in water sports and other activities in or on water. Its purpose is to provide thermal insulation and protection from abrasion, ultraviolet exposure, and stings from marine organisms. It also contributes extra buoyancy. The insulation properties of neoprene foam depend mainly on bubbles of gas enclosed within the material, which reduce its ability to conduct heat. The bubbles also give the wetsuit a low density, providing buoyancy in water.

<span class="mw-page-title-main">Neoprene</span> Family of synthetic rubbers

Neoprene is a family of synthetic rubbers that are produced by polymerization of chloroprene. Neoprene exhibits good chemical stability and maintains flexibility over a wide temperature range. Neoprene is sold either as solid rubber or in latex form and is used in a wide variety of commercial applications, such as laptop sleeves, orthopaedic braces, electrical insulation, medical gloves, liquid and sheet-applied elastomeric membranes or flashings, and automotive fan belts.

<span class="mw-page-title-main">Sleeping bag</span> Insulated covering for a person

A sleeping bag is an insulated covering for a person, essentially a lightweight quilt that can be closed with a zipper or similar means to form a tube, which functions as lightweight, portable bedding in situations where a person is sleeping outdoors. It is also commonly used indoors for people who do not have beds or at sleepovers. Its primary purpose is to provide warmth and thermal insulation through its synthetic or down insulation. It also typically has a water-resistant or water-repellent cover that protects, to some extent, against wind chill and light precipitation, but a tent is usually used in addition to a sleeping bag, as it performs those functions better. The bottom surface also provides some cushioning, but a sleeping pad or camp cot is usually used in addition for that purpose. The bottom surface of a sleeping bag may be moderately water repellent, but a plastic tarp or groundsheet is often used to protect against moist ground.

<span class="mw-page-title-main">Dry suit</span> Watertight clothing that seals the wearer from cold and hazardous liquids

A dry suit or drysuit provides the wearer with environmental protection by way of thermal insulation and exclusion of water, and is worn by divers, boaters, water sports enthusiasts, and others who work or play in or near cold or contaminated water. A dry suit normally protects the whole body except the head, hands, and possibly the feet. In hazmat configurations, however, all of these are covered as well.

<span class="mw-page-title-main">Zipper</span> Device for binding the edges of an opening of fabric or other flexible material

A zipper, zip, fly, or zip fastener, formerly known as a clasp locker, is a commonly used device for binding together two edges of fabric or other flexible material. Used in clothing, luggage and other bags, camping gear, and many other items, zippers come in a wide range of sizes, shapes, and colors. In 1892, Whitcomb L. Judson, an American inventor from Chicago, patented the original design from which the modern device evolved.

<span class="mw-page-title-main">Diving suit</span> Garment or device designed to protect a diver from the underwater environment

A diving suit is a garment or device designed to protect a diver from the underwater environment. A diving suit may also incorporate a breathing gas supply, but in most cases the term applies only to the environmental protective covering worn by the diver. The breathing gas supply is usually referred to separately. There is no generic term for the combination of suit and breathing apparatus alone. It is generally referred to as diving equipment or dive gear along with any other equipment necessary for the dive.

<span class="mw-page-title-main">Spray deck</span> Flexible waterproof cover for a boat

A spraydeck is a flexible waterproof cover for a boat with holes for the passengers' waists. Spraydecks are used to prevent water from entering the boat while allowing passengers to paddle or row.

<span class="mw-page-title-main">Inflatable boat</span> Lightweight boat constructed with flexible tubes containing pressurized gas

An inflatable boat is a lightweight boat constructed with its sides and bow made of flexible tubes containing pressurised gas. For smaller boats, the floor and hull are often flexible, while for boats longer than 3 metres (9.8 ft), the floor typically consists of three to five rigid plywood or aluminium sheets fixed between the tubes, but not joined rigidly together. Often the transom is rigid, providing a location and structure for mounting an outboard motor.

<span class="mw-page-title-main">Personal flotation device</span> Equipment to help the wearer keep afloat in water

A personal flotation device is a flotation device in the form of a vest or suit that is worn by a user to prevent the wearer from drowning in a body of water. The device will keep the wearer afloat with their head and mouth above the surface – they do not have to swim or tread water in order to stay afloat and can even be unconscious.

<span class="mw-page-title-main">Ski suit</span> Clothing for skiing

A ski suit is a suit made to be worn over the rest of the clothes when skiing or snowboarding. A ski suit made for more casual winter wear outdoors may also be called a snowsuit [ˈsnoʊˌsut] and are often used by children as everyday outerwear in the winter season. Some suits are specifically made for snowboarders but most are used by either skiers or snowboarders regardless of the style.

<span class="mw-page-title-main">Sokol space suit</span> Soviet/Russian spacesuit used on Soyuz

The Sokol space suit, also known as the Sokol IVA suit or simply the Sokol, is a type of Soviet/Russian space suit, worn by all who fly on the Soyuz spacecraft. It was introduced in 1973 and is still used as of 2023. The Sokol is described by its makers as a rescue suit and it is not capable of being used outside the spacecraft in a spacewalk or extravehicular activity. Instead, its purpose is to keep the wearer alive in the event of an accidental depressurisation of the spacecraft. In this respect, it is similar to the ACES suit that was worn aboard NASA's Space Shuttle during launch and landing.

<span class="mw-page-title-main">Inflatable armbands</span> Objects designed to help a wearer float in water

Inflatable armbands, usually referred to as simply armbands, water wings, swimmies, or floaties, are swim aids designed to help a wearer float in water and learn to swim.

<span class="mw-page-title-main">Waders (footwear)</span> Waterproof footwear or garment used for walking in water

Waders denotes a waterproof boot or overalls extending from the foot to the thigh, the chest or even the neck. They are traditionally made from vulcanised rubber, but available in more modern PVC, neoprene and Gore-Tex variants. Waders are generally distinguished from counterpart waterproof boots by shaft height; the hip boot extending to the thigh and the Wellington boot to the knee. For the sake of emphasis, therefore, waders are sometimes defined by the extent of their coverage as thigh waders, chest waders or full-body waders. As a drysuit variant, full-body waders come with leaktight cuffs or gloves fitted to the sleeves and with a leaktight collar or hood fitted to the neck, enabling the wearer to remain dry when standing or walking in deeper water. Waders are available with boots attached or can have attached stocking feet, to wear inside boots, or inside swimfins in the case of float tube fishing.

<span class="mw-page-title-main">Escape breathing apparatus</span> Self contained breathing apparatus providing gas to escape from a hazardous environment

Escape breathing apparatus, also called escape respirators, escape sets, self-rescuer masks, emergency life saving apparatus (ELSA), and emergency escape breathing devices (EEBD), are portable breathing apparatus that provide the wearer with respiratory protection for a limited period, intended for escape from or through an environment where there is no breathable ambient atmosphere. This includes escape through water and in areas containing harmful gases or fumes or other atmospheres immediately dangerous to life or health (IDLH).

<span class="mw-page-title-main">Bunker gear</span> Person protective equipment used by firefighters

Bunker gear is the personal protective equipment (PPE) used by firefighters. The term is derived from the fact that the trousers and boots are traditionally kept by the firefighters bunk at the fire station to be readily available for use.

<span class="mw-page-title-main">Lifeboat (shipboard)</span> Small boat carried on a ship for emergency evacuation

A lifeboat or liferaft is a small, rigid or inflatable boat carried for emergency evacuation in the event of a disaster aboard a ship. Lifeboat drills are required by law on larger commercial ships. Rafts (liferafts) are also used. In the military, a lifeboat may double as a whaleboat, dinghy, or gig. The ship's tenders of cruise ships often double as lifeboats. Recreational sailors usually carry inflatable liferafts, though a few prefer small proactive lifeboats that are harder to sink and can be sailed to safety.

<span class="mw-page-title-main">Launch Entry Suit</span>

The Launch Entry Suit (LES), known as the "pumpkin suit", is a partial-pressure suit that was worn by all Space Shuttle crews for the ascent and entry portions of flight from STS-26 (1988) to STS-65 (1994). It was completely phased out by STS-88 and replaced by the ACES suit. The suit was manufactured by the David Clark Company of Worcester, Massachusetts.

A Thermal Protective Aid (TPA) is an aluminized polyethylene suit with heat sealed seams that protects from the elements and prevents hypothermia.

An exposure suit, or anti-exposure suit, is clothing intended to protect the wearer from an extreme environment. Depending on the environment and specific use the suit may be required to provide thermal insulation, buoyancy, and or complete isolation from the environment. The exposure suit may be a stand-alone unit, or may require undergarments to function correctly. The choice of undergarments may depend on the specific environment. A common use of the term refers to protection from cold and wet environments at sea. Depending on type, they may be worn during normal work, in emergencies, or when exposed to unusual conditions.

References

  1. "Safety Suit Like Coveralls Warm and Water Tight" Popular Mechanics, March 1930
  2. Mebkimak, Olaek S. (Jul 16, 1872), Improvement in life-preserving dresses , retrieved 2016-01-28
  3. Sullivan, Colleen (2006). Roughing It In Rubber. BookSurge Publishing. pp. 12–23. ISBN   1419640216.
  4. Sullivan, Patricia (May 22, 2006). "Gunnar Guddal, 77; Invented Lifesaving Immersion Suit". The Washington Post . Retrieved 2016-01-28.
  5. "USMSA News Flash! ~ Gunnar Guddal ~ - United States Marine Safety Association". United States Marine Safety Association. Retrieved 2016-01-28.
  6. MSC/Circ.1047 (PDF)
  7. MSC/Circ.1114 (PDF)