A trailer light converter is an electrical component used for connecting the wiring of a trailer onto a towing vehicle.
A trailer light converter is an electrical component used for connecting the wiring of a trailer onto a towing vehicle.
A color code is a system for displaying information by using different colors.
A semi-trailer truck, also known as a semitruck, is the combination of a tractor unit and one or more semi-trailers to carry freight. A semi-trailer attaches to the tractor with a type of hitch called a fifth wheel.
Hot-wiring is the process of bypassing a motor vehicle's ignition switch and thus starting it without the key. It is often utilized during a vehicle theft. However, a legitimate vehicle owner who has lost a vehicle key or starting a vehicle with inoperable ignition switch may also implement this process.
A trailer is an unpowered vehicle towed by a powered vehicle. It is commonly used for the transport of goods and materials.
A tow hitch is a device attached to the chassis of a vehicle for towing, or a towbar to an aircraft nose gear. It can take the form of a tow ball to allow swiveling and articulation of a trailer, or a tow pin, or a tow hook with a trailer loop, often used for large or agricultural vehicles where slack in the pivot pin allows similar movements. Another category is the towing pintle used on military vehicles worldwide.
A vehicle breakdown is a mechanical or electrical failure of a motor vehicle in such a way that the underlying problem prevents the vehicle from being operated or impedes the vehicle's operation so significantly that it is very difficult, nearly impossible, or else dangerous to operate. Vehicle breakdowns have various causes. Depending on the nature of the problem, the vehicle may or may not need to be towed to an automobile repair shop.
The Meillerwagen was a German World War II trailer used to transport a V-2 rocket from the 'transloading point' of the Technical Troop Area to the launching point, to erect the missile on the Brennstand, and to act as the service gantry for fuelling and launch preparation.
Towing is coupling two or more objects together so that they may be pulled by a designated power source or sources. The towing source may be a motorized land vehicle, vessel, animal, or human, and the load being anything that can be pulled. These may be joined by a chain, rope, bar, hitch, three-point, fifth wheel, coupling, drawbar, integrated platform, or other means of keeping the objects together while in motion.
A brake controller is usually an original equipment manufacturer or aftermarket-installed device or module. It is mounted to the tow vehicle's driver's-side dashboard area, and engages a trailer's electrical braking system either time delayed, or in proportion to the tow vehicle's brake engagement when slowing down or coming to a halt. A brake controller is not needed with a trailer surge braking system unless using modern electric over hydraulic devices. The trailer in this case usually has either electric friction brakes or electric-hydraulic trailer brake actuators.
ISO 11992 is a CAN based vehicle bus standard by the heavy duty truck industry. It is used for communication between the tractor and one or more trailers. Its full title is "Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles".
A drawbar is a solid coupling between a hauling vehicle and its hauled load. Drawbars are in common use with rail transport, road trailers, both large and small, industrial and recreational, and with agricultural equipment.
The Anderson Powerpole is a family of electrical connectors by Anderson Power Products (APP), although plug compatible connectors are now available from alternate sources. Specific variants of this series of connectors have become de facto standards for conveying "higher power" direct current (DC) electrical power, although these standards are inconsistent and sometimes ignored.
A trailer connector is a multi-pole electrical connector between a towing vehicle such as a car or truck and a trailer. It is intended primarily to supply automotive lighting on the trailer, but also provide management and supply to other consumers. It is also referred to as "trailer wire," "trailer cable," or "trailer connecting cable." Another feature the connector offers is feedback from the trailer to the towing vehicle, from being as simple as a fault indication for ABS brakes to advanced command, monitor and control using CAN bus for EBS brakes.
A number of ISO standards cover trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control for the trailers. These are listed below, with notes on significant deviations from them that can cause problems.
A number of standards prevail in Europe for trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control for the trailers.
A number of standards prevail in North America, or parts of it, for trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control for the trailers.
An electric friction brake, often referred to as just electric brake or electric trailer brake, is a brake controlled by an electric current and can be seen on medium duty trailers like caravans/RVs and consumer-grade car trailers. It is related to the electromagnetic track brake used in railways which also use electric current to directly control the brake force.
A number of standards prevail in Australia for trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control for the trailers.
A number of standards specific to military organizations exist for trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control for the trailers. These can be found on surplus equipment sold for civilian use.
A towing sock or wire rope puller or wire pulling grip is a device that connects to the end of a cable, such as a power cable, in order to pull it through a tube or tunnel. It works by tightening around the cable when pulled, in the same manner as a Chinese finger trap. The towing sock is tubular and made of braided cable, open at one end and closed at the other where it connects to a tow line using an eye splice.
 | This article about an automotive part or component is a stub. You can help Wikipedia by expanding it. |