Trammel of Archimedes

Last updated October 12, 2023

A trammel of Archimedes is a mechanism that generates the shape of an ellipse.^[1] It consists of two shuttles which are confined ("trammeled") to perpendicular channels or rails and a rod which is attached to the shuttles by pivots at fixed positions along the rod.

The straight lines described by the pivots are special cases of an ellipse, where the length of one axis is twice the distance between the pivots and that of the other is zero. All points on a circle with a diameter defined by the two pivots reciprocate in such straight lines. This circle corresponds to the smaller circle in a Tusi couple.

The point midway between the pivots orbits in a circle around the point where the channels cross. This circle is also a special case of an ellipse. Here the axes are of equal length. The diameter of the circle is equal to the distance between the pivots. The direction of travel around the orbit is opposite to the sense of rotation of the trammel. Thus, if a crank centred on the crossing point of the channels is used to engage the trammel at the midway point to drive it, the rotation of the crankpin and the trammel are equal and opposite, which in practical applications results in extra friction and accelerated wear. This is compounded by high forces owing to the short throw of the crank of only 1/4 the travel of the pivots.

Wooden versions of the trammel of Archimedes have been produced as devices to draw or cut ellipses, known as ellipsographs. Versions are also made as toys or novelty items (sold under the name of Kentucky do-nothings, nothing grinders, do nothing machines, smoke grinders, or bullshit grinders). In these toys the drafting instrument is replaced by a crank handle, and the position of the sliding shuttles is usually fixed.^{[ clarification needed ]}

Mathematics

Concept

Trammel of Archimedes as ellipsograph
Diagram
Loci of some points along and beyond a trammel of Archimedes, the green circle being the loci of its midpoint – in the SVG file, move the pointer over the diagram to move the trammel
Trammel of Archimedes with three sliders

Let $C$ be the outer end of the rod, and $A$ , $B$ be the pivots of the sliders. Let $AB$ and $BC$ be the distances from $A$ to $B$ and $B$ to $C$ , respectively. Let us assume that sliders $A$ and $B$ move along the $y$ and $x$ coordinate axes, respectively. When the rod makes an angle $θ$ with the x-axis, the coordinates of point $C$ are given by

x=(AB+BC)\cos \theta \,

y=BC\sin \theta \,

These are in the form of the standard parametric equations for an ellipse in canonical position. The further equation

{\frac {x^{2}}{(AB+BC)^{2}}}+{\frac {y^{2}}{(BC)^{2}}}=1

is immediate as well.

The trammel of Archimedes is an example of a four-bar linkage with two sliders and two pivots, and is special case of the more general oblique trammel. The axes constraining the pivots do not have to be perpendicular and the points $A$ , $B$ and $C$ can form a triangle. The resulting locus of $C$ is still an ellipse.^[2]

Ellipsographs

An ellipsograph is a trammel of Archimedes intended to draw, cut, or machine ellipses, e.g. in wood or other sheet materials. An ellipsograph has the appropriate instrument (pencil, knife, router, etc.) attached to the rod. Usually the distances a and b are adjustable, so that the size and shape of the ellipse can be varied.

The history of such ellipsographs is not certain, but they are believed to date back to Proclus and perhaps even to the time of Archimedes.^[2]

Notes

↑ Schwartzman, Steven (1996). The Words of Mathematics . The Mathematical Association of America. ISBN 0-88385-511-9. ( restricted online copy , p. 223, at Google Books)
1 2 Wetzel, John E. (February 2010). "An Ancient Elliptic Locus". American Mathematical Monthly . 117 (2): 161–167. doi:10.4169/000298910x476068. JSTOR 10. S2CID 117701083.

Related Research Articles

<span class="mw-page-title-main">Circumference</span> Perimeter of a circle or ellipse

In geometry, the circumference is the perimeter of a circle or ellipse. The circumference is the arc length of the circle, as if it were opened up and straightened out to a line segment. More generally, the perimeter is the curve length around any closed figure. Circumference may also refer to the circle itself, that is, the locus corresponding to the edge of a disk. The circumference of a sphere is the circumference, or length, of any one of its great circles.

<span class="mw-page-title-main">Circle</span> Simple curve of Euclidean geometry

A circle is a shape consisting of all points in a plane that are at a given distance from a given point, the centre. The distance between any point of the circle and the centre is called the radius.

<span class="mw-page-title-main">Ellipse</span> Plane curve: conic section

In mathematics, an ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of the two distances to the focal points is a constant. It generalizes a circle, which is the special type of ellipse in which the two focal points are the same. The elongation of an ellipse is measured by its eccentricity $, a number ranging from to .$

In mathematics, a hyperbola is a type of smooth curve lying in a plane, defined by its geometric properties or by equations for which it is the solution set. A hyperbola has two pieces, called connected components or branches, that are mirror images of each other and resemble two infinite bows. The hyperbola is one of the three kinds of conic section, formed by the intersection of a plane and a double cone. If the plane intersects both halves of the double cone but does not pass through the apex of the cones, then the conic is a hyperbola.

In astronomy, Kepler's laws of planetary motion, published by Johannes Kepler between 1609 and 1619, describe the orbits of planets around the Sun. The laws modified the heliocentric theory of Nicolaus Copernicus, replacing its circular orbits and epicycles with elliptical trajectories, and explaining how planetary velocities vary. The three laws state that:

The orbit of a planet is an ellipse with the Sun at one of the two foci.
A line segment joining a planet and the Sun sweeps out equal areas during equal intervals of time.
The square of a planet's orbital period is proportional to the cube of the length of the semi-major axis of its orbit.

In mathematics, a parabola is a plane curve which is mirror-symmetrical and is approximately U-shaped. It fits several superficially different mathematical descriptions, which can all be proved to define exactly the same curves.

A sphere is a geometrical object that is a three-dimensional analogue to a two-dimensional circle. Formally, a sphere is the set of points that are all at the same distance $r$ from a given point in three-dimensional space. That given point is the centre of the sphere, and $r$ is the sphere's radius. The earliest known mentions of spheres appear in the work of the ancient Greek mathematicians.

<span class="mw-page-title-main">Lever</span> Simple machine consisting of a beam pivoted at a fixed hinge

A lever is a simple machine consisting of a beam or rigid rod pivoted at a fixed hinge, or fulcrum. A lever is a rigid body capable of rotating on a point on itself. On the basis of the locations of fulcrum, load and effort, the lever is divided into three types. It is one of the six simple machines identified by Renaissance scientists. A lever amplifies an input force to provide a greater output force, which is said to provide leverage, which is mechanical advantage gained in the system, equal to the ratio of the output force to the input force. As such, the lever is a mechanical advantage device, trading off force against movement.

In electrodynamics, elliptical polarization is the polarization of electromagnetic radiation such that the tip of the electric field vector describes an ellipse in any fixed plane intersecting, and normal to, the direction of propagation. An elliptically polarized wave may be resolved into two linearly polarized waves in phase quadrature, with their polarization planes at right angles to each other. Since the electric field can rotate clockwise or counterclockwise as it propagates, elliptically polarized waves exhibit chirality.

The Archimedean spiral (also known as the arithmetic spiral) is a spiral named after the 3rd-century BC Greek mathematician Archimedes. It is the locus corresponding to the locations over time of a point moving away from a fixed point with a constant speed along a line that rotates with constant angular velocity. Equivalently, in polar coordinates $(r, θ)$ it can be described by the equation

<span class="mw-page-title-main">Ellipsoid</span> Quadric surface that looks like a deformed sphere

An ellipsoid is a surface that can be obtained from a sphere by deforming it by means of directional scalings, or more generally, of an affine transformation.

A cone is a three-dimensional geometric shape that tapers smoothly from a flat base to a point called the apex or vertex.

<span class="mw-page-title-main">Cylinder</span> Three-dimensional solid

A cylinder has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base.

In orbital mechanics, the eccentric anomaly is an angular parameter that defines the position of a body that is moving along an elliptic Kepler orbit. The eccentric anomaly is one of three angular parameters ("anomalies") that define a position along an orbit, the other two being the true anomaly and the mean anomaly.

In geometry, the area enclosed by a circle of radius $r$ is $π r 2$ . Here the Greek letter $π$ represents the constant ratio of the circumference of any circle to its diameter, approximately equal to 3.14159.

In cartography, a Tissot's indicatrix is a mathematical contrivance presented by French mathematician Nicolas Auguste Tissot in 1859 and 1871 in order to characterize local distortions due to map projection. It is the geometry that results from projecting a circle of infinitesimal radius from a curved geometric model, such as a globe, onto a map. Tissot proved that the resulting diagram is an ellipse whose axes indicate the two principal directions along which scale is maximal and minimal at that point on the map.

A straight-line mechanism is a mechanism that converts any type of rotary or angular motion to perfect or near-perfect straight-line motion, or vice versa. Straight-line motion is linear motion of definite length or "stroke", every forward stroke being followed by a return stroke, giving reciprocating motion. The first such mechanism, patented in 1784 by James Watt, produced approximate straight-line motion, referred to by Watt as parallel motion.

A conic section, conic or a quadratic curve is a curve obtained from a cone's surface intersecting a plane. The three types of conic section are the hyperbola, the parabola, and the ellipse; the circle is a special case of the ellipse, though it was sometimes called as a fourth type. The ancient Greek mathematicians studied conic sections, culminating around 200 BC with Apollonius of Perga's systematic work on their properties.

In geometry, the major axis of an ellipse is its longest diameter: a line segment that runs through the center and both foci, with ends at the two most widely separated points of the perimeter. The semi-major axis is the longest semidiameter or one half of the major axis, and thus runs from the centre, through a focus, and to the perimeter. The semi-minor axis of an ellipse or hyperbola is a line segment that is at right angles with the semi-major axis and has one end at the center of the conic section. For the special case of a circle, the lengths of the semi-axes are both equal to the radius of the circle.

A slider-crank linkage is a four-link mechanism with three revolute joints and one prismatic, or sliding, joint. The rotation of the crank drives the linear movement of the slider, or the expansion of gases against a sliding piston in a cylinder can drive the rotation of the crank.

References

J. W. Downs: Practical Conic Sections: The Geometric Properties of Ellipses, Parabolas and Hyperbolas. Courier Dover 2003, ISBN 978-0-486-42876-5, pp. 4–5 ( restricted online copy , p. 4, at Google Books)
I. I. Artobolevskii Mechanisms for the Generation of Plane Curves. Pergamon Press 1964, ISBN 978-1483120003.

External links

Video of various trammel designs in action
Cutting ellipses in wood
Photo of a Kentucky Do-Nothing
Instructions on how to build a Kentucky Do-Nothing
Video of a Do-Nothing made from Lego bricks
"Wonky Trammel of Archimedes" An exploration of a generalized trammel.
US-Patent 4306598 for ellipse cutting guide allowing small ellipses
Secrets of the Nothing Grinder YouTube video by Mathologer

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Schwartzman, Steven (1996). The Words of Mathematics . The Mathematical Association of America. ISBN 0-88385-511-9. ( restricted online copy , p. 223, at Google Books)

[AMM-2] 1 2 Wetzel, John E. (February 2010). "An Ancient Elliptic Locus". American Mathematical Monthly . 117 (2): 161–167. doi:10.4169/000298910x476068. JSTOR 10. S2CID 117701083.

[1]

[2]