Last updated
Two Ottoman yatagan (yataghan).jpg
Two Ottoman yatagans, 19th century.
TypeHewing knife / sabre
Place of origin Yatağan, Turkey
Service history
In service16th-19th century
Used by Ottoman Empire
WarsOttoman wars
Mass~0.85 kg
Length~0.75 m
Barrel  length~0.60 m

Blade  typeSingle-edged, curved forward
Hilt  typePronged sideways towards pommel, no guard; typically made from horn, bone or metal (silver)

The yatagan or yataghan (from Turkish yatağan [1] ) is a type of Ottoman knife or short sabre used from the mid-16th to late 19th centuries. The yatagan was extensively used in Ottoman Turkey and in areas under immediate Ottoman influence, such as the Balkans and the Caucasus.



The yatagan consists of a single-edged blade with a marked forward curve and a hilt formed of two grip plaques attached through the tang, the end of the hilt being shaped like large ears. The gap between the grips is covered by a metal strap, which is often decorated. The blade varies from 60 centimetres (24 in) to 80 centimetres (31 in) in length and is curved forward (like the Iberian falcata, or Ancient Egyptian kopis), sometimes reclining backwards again towards the very end. This blade form is often referred to as being 'recurved'. While the back of the blade is made of softer steel, the sharp edge is made of hard, tempered steel for durability.

Yataghan (on top) and kilij from Topkapi Palace Museum Imperial Armoury Imperial Armoury Topkapi Istanbul (19).JPG
Yataghan (on top) and kilij from Topkapı Palace Museum İmperial Armoury

The hilt has no guard; 'bolsters' of metal connect the grips to the shoulder of the blade. The grip plaques are typically made from bone, ivory, horn or silver, and spread out in two 'wings' or 'ears' to either side at the pommel (a feature which prevents the hilt slipping out of the hand when used to cut). Regional variations in the hilts have been noted: Balkan yatagans tend to have larger ears and are often of bone or ivory, whilst Anatolian yatagans characteristically have smaller ears which are more often made of horn or silver, while Ionian coast Zeibeks carried T Hilt Yataghans. [2] Sophisticated artwork on both the hilt and the blade can be seen on many yatagans displayed today, indicating considerable symbolic value. Having no guard, the yatagan fitted closely into the top of the scabbard; this was customarily worn thrust into a waist sash, retained by hook. The blade may have the Seal of Solomon motif pressed into the blade. Other popular imprints include the makers signature symbol, or text from the Quran. [3]

The majority of yatagans date from the period 1750–1860, and from the number of plain, wooden-hilted weapons they were honest fighting weapons as well as ornate parade weapons. The more ornate examples were often worn as a status symbol by civilians, as well as military men, much in the way smallswords were worn in 18th century Western Europe.

Occasionally blades were cut down from broadswords or cavalry swords, but in general the forward-curving single-edged blade was used. Verses in gold or silver are often laid along the blade. Silver hilts mounted with filigree and coral, for example, are associated with Turkish Yataghans; many of these are dated around 1800, although it wasn't uncommon for the blades to be dated much earlier. The most flamboyant scabbards are of wood, encased entirely with silver.

By contrast, in the later half of the 1800s, the prevalence of sword bayonets on military rifles gave rise to an entire style of mass-produced military bayonets known as "Yataghan style".

The yatagans used by janissaries (called varsak) and other infantry soldiers were smaller and lighter than ordinary swords so as not to hinder them when carried at the waist on the march.

The Fencing Lesson by Paja Jovanovic. Paja Jovanovic;Cas macevanje.jpg
The Fencing Lesson by Paja Jovanović.
Aqil Agha, with his yatagan Aqil Agha by Lynch.jpg
Aqil Agha, with his yatagan

The town of Yatağan in southwest Turkey (now in Denizli province) was famous for its yataghan smithing and in folklore is considered to be the birthplace of yataghans.

According to legend, the town was conquered by a Seljuk commander and blacksmith named Osman Bey, whose cognomen was Yatağan Baba (Father Yataghan). Yatağan Baba later settled there and invented the yataghan type blades, and gave his name not only to the town, but to the weapon he invented and produced there.

See also

Related Research Articles

A sword is an edged, bladed weapon intended for manual cutting or thrusting. Its blade, longer than a knife or dagger, is attached to a hilt and can be straight or curved. A thrusting sword tends to have a straighter blade with a pointed tip. A slashing sword is more likely to be curved and to have a sharpened cutting edge on one or both sides of the blade. Many swords are designed for both thrusting and slashing. The precise definition of a sword varies by historical epoch and geographic region.

Shamshir Type of Persian/Iranian curved sword

A shamshir is a type of Persian/Iranian sword with a radical curve. The name is derived from the shamshīr, which means "sword" in the Persian language. The curved "scimitar" sword family includes the shamshir, kilij, talwar, pulwar and nimcha.


The term kopis in Ancient Greece could describe a heavy knife with a forward-curving blade, primarily used as a tool for cutting meat, for ritual slaughter and animal sacrifice, or refer to a single edged cutting or "cut and thrust" sword with a similarly shaped blade.

Kilij Sword

A kilij is a type of one-handed, single-edged and moderately curved scimitar used by the Timurid Empire, Mamluk Empire, Ottoman Empire, and the later Turkic Khanates of Central Asia and Eurasian steppes. These blades developed from earlier Turko-Mongol sabers that were in use in lands invaded or influenced by the Turkic peoples.

Talwar Sword

The talwar, also spelled talwaar and tulwar, is a type of curved sword or sabre from the Indian subcontinent.

A sword bayonet is any long, knife-bladed bayonet designed for mounting on a musket or rifle. Its use is thought to have begun in the 18th century and to have reached its height of popularity throughout the 19th and into the early 20th centuries. When unmounted from a musket or rifle, sword bayonets with their typical hilts and long blades also could be wielded as short swords. While modern military bayonets typically have knife blades, they are usually too short to be called sword bayonets and are more akin to fighting/utility knives.

Japanese sword mountings Housings and associated fittings that hold the blade of a Japanese sword

Japanese sword mountings are the various housings and associated fittings (tosogu) that hold the blade of a Japanese sword when it is being worn or stored. Koshirae (拵え) refers to the ornate mountings of a Japanese sword used when the sword blade is being worn by its owner, whereas the shirasaya is a plain undecorated wooden mounting composed of a saya and tsuka that the sword blade is stored in when not being used.


The shashka or shasqua, is a kind of sabre; single-edged, single-handed, and guardless backsword. In appearance, the shashka is midway between a typically curved sabre and a straight sword. It has a slightly curved blade, and can be effective for both cutting and thrusting.

Jambiya type of dagger

A jambiya, also spelled janbiya, jambya, jambia and janbia, is a specific type of dagger with a short curved blade with a medial ridge that originated from Hadhramaut and Yemen. It is most closely associated with the people of Yemen, Saudi Arabia and Somalia. Men typically above the age of 14 wear it as an accessory to their clothing. The janbiya is commonly referred to in Oman as a khanjar, Hyderabad (India) as Jambiya, xencer in Kurdistan region.

Dha (sword) Burmese knife

Dha is the Burmese word for "knife" similar term to daab or darb in Thai language for a single edge sword. The term dha is conventionally used to refer to a wide variety of knives and swords used by many people across Southeast Asia, especially present-day Myanmar (Burma), Thailand, Yunnan, Laos, Cambodia and Vietnam.

Model 1840 army noncommissioned officers sword Sword

The Model 1840 noncommissioned officers' sword was adopted by the United States military in 1840. Based primarily on a sword used by the French Army, the model 1840 NCO proved somewhat heavy hilted and ill balanced. For over 70 years, it was widely used by the Army; today its usage is restricted to ceremonial occasions. The sword had a 31-inch blade, a cast brass hilt resembling the more expensive wire-wrapped leather grips, and a leather scabbard rather than the steel used by cavalry troopers and officers, although some makers, such as Emerson and Silver, issued a steel scabbard rather than leather to protect from wear. Leather scabbards were phased out beginning in 1868.

1796 Heavy Cavalry Sword

The pattern 1796 Heavy Cavalry Sword was the sword used by the British heavy cavalry, and King's German Legion Dragoons, through most of the period of the Revolutionary and Napoleonic Wars. It played an especially notable role, in the hands of British cavalrymen, at the battles of Salamanca and Waterloo. The pattern was adopted by Sweden and was used by some Portuguese cavalry.

Ottoman weapons

Military forces of the Ottoman Empire used a variety of weapons throughout the centuries. The armoury in Topkapı Palace has a large collection of which it shows select items.

Barong (sword) Sword or knife

The barong is a thick, leaf-shaped, single-edged blade sword. It is a weapon used by Muslim Filipino ethnolinguistic groups like the Tausug, Sama-Bajau, or Yakan in the Southern Philippines.

Piha kaetta

The piha kaetta, also sometimes called 'the Kandyan knife', is a knife or dagger native to the island of Sri Lanka. A typical piha kaetta has a straight-backed blade combined with a drop-point and a curved cutting edge. Many of the finest piha kaetta knives were produced in royal workshops, show very high levels of craftsmanship, and were given to courtiers and the nobility as status symbols.

Dao (Naga sword) Sword

Dao is the sword of the Naga people of Northeastern India, mainly in the Indian states of Assam and Nagaland. The sword, with its wooden hilt, and unique square form is used for digging as well as for killing.

Pichangatti Knife

Pichangatti is a broad-bladed knife of the Kodavas of Karnataka, India. The characteristic of the pichangatti is its silver hilt with bulbous-shaped pommel in the shape of a parrot's head. The pichangatti features in the traditional male dress of the Kodavas.

Odi katti is an indigenous weapon of war and tools to the Kodava people of Kodagu, in the state of Karnataka, India. The ayudha katti is developed from an implement used to cut through dense undergrowth. Unlike most blades, the odi katti is worn without a sheath.

Turko-Mongol sabers Cavalry Sabre

These swords were used by the Turkic nomads of the Eurasian steppes primarily between the 8th and 14th centuries. One of the earliest recorded sabres of this type was recovered from an Avar grave in Romania dating to the mid 7th century. Although minor variations occur in size and hilt, they are common enough in design across 5 centuries that individual blades are difficult to date when discovered without other context.

The Pattern 1831 sabre for General Officers is a British army pattern sword prescribed for the use of officers of the rank of major-general and above. It has been in continuous use from 1831 to the present. It is an example of a type of sword described as a mameluke sabre.