Gallium arsenide

Last updated
Gallium arsenide
Gallium-arsenide-unit-cell-3D-balls.png
Gallium Arsenide (GaAs) 2" wafer.jpg
GaAs wafer of (100) orientation
Names
Preferred IUPAC name
Gallium arsenide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.013.741 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 215-114-8
MeSH gallium+arsenide
PubChem CID
RTECS number
  • LW8800000
UNII
UN number 1557
  • InChI=1S/AsH3.Ga.3H/h1H3;;;; X mark.svgN
    Key: SHVQQKYXGUBHBI-UHFFFAOYSA-N X mark.svgN
  • [Ga]#[As]
  • [Ga+3].[As-3]
Properties
GaAs
Molar mass 144.645 g/mol [1]
AppearanceGray crystals [1]
Odor garlic-like when moistened
Density 5.3176 g/cm3 [1]
Melting point 1,238 °C (2,260 °F; 1,511 K) [1]
insoluble
Solubility soluble in HCl
insoluble in ethanol, methanol, acetone
Band gap 1.424 eV (at 300 K) [2]
Electron mobility 9000 cm2/(V·s) (at 300 K) [3]
-16.2×10−6 cgs [4]
Thermal conductivity 0.56 W/(cm·K) (at 300 K) [5]
3.3 [4]
Structure [5]
Zinc blende
T2d-F-43m
a = 565.315 pm
Tetrahedral
Linear
Hazards
GHS labelling:
GHS-pictogram-silhouette.svg
Danger
H350, H360F, H372
P261, P273, P301+P310, P311, P501
NFPA 704 (fire diamond)
NFPA 704.svgHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
0
0
Safety data sheet (SDS) External MSDS
Related compounds
Other anions
Gallium nitride
Gallium phosphide
Gallium antimonide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Gallium arsenide (GaAs) is a III-V direct band gap semiconductor with a zinc blende crystal structure.

Contents

Gallium arsenide is used in the manufacture of devices such as microwave frequency integrated circuits, monolithic microwave integrated circuits, infrared light-emitting diodes, laser diodes, solar cells and optical windows. [6]

GaAs is often used as a substrate material for the epitaxial growth of other III-V semiconductors, including indium gallium arsenide, aluminum gallium arsenide and others.

Preparation and chemistry

In the compound, gallium has a +3 oxidation state. Gallium arsenide single crystals can be prepared by three industrial processes: [6]

Alternative methods for producing films of GaAs include: [6] [8]

Oxidation of GaAs occurs in air, degrading performance of the semiconductor. The surface can be passivated by depositing a cubic gallium(II) sulfide layer using a tert-butyl gallium sulfide compound such as (t
BuGaS)
7
. [9]

Semi-insulating crystals

In the presence of excess arsenic, GaAs boules grow with crystallographic defects; specifically, arsenic antisite defects (an arsenic atom at a gallium atom site within the crystal lattice). The electronic properties of these defects (interacting with others) cause the Fermi level to be pinned to near the center of the band gap, so that this GaAs crystal has very low concentration of electrons and holes. This low carrier concentration is similar to an intrinsic (perfectly undoped) crystal, but much easier to achieve in practice. These crystals are called "semi-insulating", reflecting their high resistivity of 107–109 Ω·cm (which is quite high for a semiconductor, but still much lower than a true insulator like glass). [10]

Etching

Wet etching of GaAs industrially uses an oxidizing agent such as hydrogen peroxide or bromine water, [11] and the same strategy has been described in a patent relating to processing scrap components containing GaAs where the Ga3+
is complexed with a hydroxamic acid ("HA"), for example: [12]

GaAs + H
2
O
2
+ "HA" → "GaA" complex + H
3
AsO
4
+ 4 H
2
O

This reaction produces arsenic acid. [13]

Electronics

GaAs digital logic

GaAs can be used for various transistor types: [14]

The HBT can be used in integrated injection logic (I2L).

The earliest GaAs logic gate used Buffered FET Logic (BFL). [14]

From c.1975 to 1995 the main logic families used were: [14]

Comparison with silicon for electronics

GaAs advantages

Some electronic properties of gallium arsenide are superior to those of silicon. It has a higher saturated electron velocity and higher electron mobility, allowing gallium arsenide transistors to function at frequencies in excess of 250 GHz.[ citation needed ] GaAs devices are relatively insensitive to overheating, owing to their wider energy band gap, and they also tend to create less noise (disturbance in an electrical signal) in electronic circuits than silicon devices, especially at high frequencies. This is a result of higher carrier mobilities and lower resistive device parasitics. These superior properties are compelling reasons to use GaAs circuitry in mobile phones, satellite communications, microwave point-to-point links and higher frequency radar systems. It is also used in the manufacture of Gunn diodes for the generation of microwaves.[ citation needed ]

Another advantage of GaAs is that it has a direct band gap, which means that it can be used to absorb and emit light efficiently. Silicon has an indirect band gap and so is relatively poor at emitting light.[ citation needed ]

As a wide direct band gap material with resulting resistance to radiation damage, GaAs is an excellent material for outer space electronics and optical windows in high power applications.[ citation needed ]

Because of its wide band gap, pure GaAs is highly resistive. Combined with a high dielectric constant, this property makes GaAs a very good substrate for integrated circuits and unlike Si provides natural isolation between devices and circuits. This has made it an ideal material for monolithic microwave integrated circuits (MMICs), where active and essential passive components can readily be produced on a single slice of GaAs.

One of the first GaAs microprocessors was developed in the early 1980s by the RCA Corporation and was considered for the Star Wars program of the United States Department of Defense. These processors were several times faster and several orders of magnitude more radiation resistant than their silicon counterparts, but were more expensive. [16] Other GaAs processors were implemented by the supercomputer vendors Cray Computer Corporation, Convex, and Alliant in an attempt to stay ahead of the ever-improving CMOS microprocessor. Cray eventually built one GaAs-based machine in the early 1990s, the Cray-3, but the effort was not adequately capitalized, and the company filed for bankruptcy in 1995.

Complex layered structures of gallium arsenide in combination with aluminium arsenide (AlAs) or the alloy AlxGa1−xAs can be grown using molecular-beam epitaxy (MBE) or using metalorganic vapor-phase epitaxy (MOVPE). Because GaAs and AlAs have almost the same lattice constant, the layers have very little induced strain, which allows them to be grown almost arbitrarily thick. This allows extremely high performance and high electron mobility HEMT transistors and other quantum well devices.

GaAs is used for monolithic radar power amplifiers (but GaN can be less susceptible to heat damage). [17]

Silicon advantages

Silicon has three major advantages over GaAs for integrated circuit manufacture. First, silicon is abundant and cheap to process in the form of silicate minerals. The economies of scale available to the silicon industry has also hindered the adoption of GaAs.[ citation needed ]

In addition, a Si crystal has a very stable structure and can be grown to very large diameter boules and processed with very good yields. It is also a fairly good thermal conductor, thus enabling very dense packing of transistors that need to get rid of their heat of operation, all very desirable for design and manufacturing of very large ICs. Such good mechanical characteristics also make it a suitable material for the rapidly developing field of nanoelectronics. Naturally, a GaAs surface cannot withstand the high temperatures needed for diffusion; however a viable and actively pursued alternative as of the 1980s was ion implantation. [18]

The second major advantage of Si is the existence of a native oxide (silicon dioxide, SiO2), which is used as an insulator. Silicon dioxide can be incorporated onto silicon circuits easily, and such layers are adherent to the underlying silicon. SiO2 is not only a good insulator (with a band gap of 8.9 eV), but the Si-SiO2 interface can be easily engineered to have excellent electrical properties, most importantly low density of interface states. GaAs does not have a native oxide, does not easily support a stable adherent insulating layer, and does not possess the dielectric strength or surface passivating qualities of the Si-SiO2. [18]

Aluminum oxide (Al2O3) has been extensively studied as a possible gate oxide for GaAs (as well as InGaAs).

The third advantage of silicon is that it possesses a higher hole mobility compared to GaAs (500 versus 400 cm2V−1s−1). [19] This high mobility allows the fabrication of higher-speed P-channel field-effect transistors, which are required for CMOS logic. Because they lack a fast CMOS structure, GaAs circuits must use logic styles which have much higher power consumption; this has made GaAs logic circuits unable to compete with silicon logic circuits.

For manufacturing solar cells, silicon has relatively low absorptivity for sunlight, meaning about 100 micrometers of Si is needed to absorb most sunlight. Such a layer is relatively robust and easy to handle. In contrast, the absorptivity of GaAs is so high that only a few micrometers of thickness are needed to absorb all of the light. Consequently, GaAs thin films must be supported on a substrate material. [20]

Silicon is a pure element, avoiding the problems of stoichiometric imbalance and thermal unmixing of GaAs. [21]

Silicon has a nearly perfect lattice; impurity density is very low and allows very small structures to be built (down to 5 nm in commercial production as of 2020 [22] ). In contrast, GaAs has a very high impurity density, [23] which makes it difficult to build integrated circuits with small structures, so the 500 nm process is a common process for GaAs.[ citation needed ]

Silicon has about three times the thermal conductivity of GaAs, with less risk of local overheating in high power devices. [17]

Other applications

Triple-junction GaAs cells covering MidSTAR-1 MidSTAR-1.jpg
Triple-junction GaAs cells covering MidSTAR-1

Transistor uses

Gallium arsenide (GaAs) transistors are used in the RF power amplifiers for cell phones and wireless communicating. [24]

Solar cells and detectors

Gallium arsenide is an important semiconductor material for high-cost, high-efficiency solar cells and is used for single-crystalline thin-film solar cells and for multi-junction solar cells. [25]

The first known operational use of GaAs solar cells in space was for the Venera 3 mission, launched in 1965. The GaAs solar cells, manufactured by Kvant, were chosen because of their higher performance in high temperature environments. [26] GaAs cells were then used for the Lunokhod rovers for the same reason.[ citation needed ]

In 1970, the GaAs heterostructure solar cells were developed by the team led by Zhores Alferov in the USSR, [27] [28] [29] achieving much higher efficiencies. In the early 1980s, the efficiency of the best GaAs solar cells surpassed that of conventional, crystalline silicon-based solar cells. In the 1990s, GaAs solar cells took over from silicon as the cell type most commonly used for photovoltaic arrays for satellite applications. Later, dual- and triple-junction solar cells based on GaAs with germanium and indium gallium phosphide layers were developed as the basis of a triple-junction solar cell, which held a record efficiency of over 32% and can operate also with light as concentrated as 2,000 suns. This kind of solar cell powered the Mars Exploration Rovers Spirit and Opportunity, which explored Mars' surface. Also many solar cars utilize GaAs in solar arrays, as did the Hubble Telescope. [30]

GaAs-based devices hold the world record for the highest-efficiency single-junction solar cell at 29.1% (as of 2019). This high efficiency is attributed to the extreme high quality GaAs epitaxial growth, surface passivation by the AlGaAs, [31] and the promotion of photon recycling by the thin film design. [32] GaAs-based photovoltaics are also responsible for the highest efficiency (as of 2022) of conversion of light to electricity, as researchers from the Fraunhofer Institute for Solar Energy Systems achieved a 68.9% efficiency when exposing a GaAs thin film photovoltaic cell to monochromatic laser light with a wavelength of 858 nanometers. [33]

Today, multi-junction GaAs cells have the highest efficiencies of existing photovoltaic cells and trajectories show that this is likely to continue to be the case for the foreseeable future. [34] In 2022, Rocket Lab unveiled a solar cell with 33.3% efficiency [35] based on inverted metamorphic multi-junction (IMM) technology. In IMM, the lattice-matched (same lattice parameters) materials are grown first, followed by mismatched materials. The top cell, GaInP, is grown first and lattice matched to the GaAs substrate, followed by a layer of either GaAs or GaInAs with a minimal mismatch, and the last layer has the greatest lattice mismatch. [36] After growth, the cell is mounted to a secondary handle and the GaAs substrate is removed. A main advantage of the IMM process is that the inverted growth according to lattice mismatch allows a path to higher cell efficiency.

Complex designs of AlxGa1−xAs-GaAs devices using quantum wells can be sensitive to infrared radiation (QWIP).

GaAs diodes can be used for the detection of X-rays. [37]

Future outlook of GaAs solar cells

Despite GaAs-based photovoltaics being the clear champions of efficiency for solar cells, they have relatively limited use in today's market. In both world electricity generation and world electricity generating capacity, solar electricity is growing faster than any other source of fuel (wind, hydro, biomass, and so on) for the last decade. [38] However, GaAs solar cells have not currently been adopted for widespread solar electricity generation. This is largely due to the cost of GaAs solar cells - in space applications, high performance is required and the corresponding high cost of the existing GaAs technologies is accepted. For example, GaAs-based photovoltaics show the best resistance to gamma radiation and high temperature fluctuations, which are of great importance for spacecraft. [39] But in comparison to other solar cells, III-V solar cells are two to three orders of magnitude more expensive than other technologies such as silicon-based solar cells. [40] The primary sources of this cost are the epitaxial growth costs and the substrate the cell is deposited on.

GaAs solar cells are most commonly fabricated utilizing epitaxial growth techniques such as metal-organic chemical vapor deposition (MOCVD) and hydride vapor phase epitaxy (HVPE). A significant reduction in costs for these methods would require improvements in tool costs, throughput, material costs, and manufacturing efficiency. [40] Increasing the deposition rate could reduce costs, but this cost reduction would be limited by the fixed times in other parts of the process such as cooling and heating. [40]

The substrate used to grow these solar cells is usually germanium or gallium arsenide which are notably expensive materials. One of the main pathways to reduce substrate costs is to reuse the substrate. An early method proposed to accomplish this is epitaxial lift-off (ELO), [41] but this method is time-consuming, somewhat dangerous (with its use of hydrofluoric acid), and requires multiple post-processing steps. However, other methods have been proposed that use phosphide-based materials and hydrochloric acid to achieve ELO with surface passivation and minimal post-etching residues and allows for direct reuse of the GaAs substrate. [42] There is also preliminary evidence that spalling could be used to remove the substrate for reuse. [43] An alternative path to reduce substrate cost is to use cheaper materials, although materials for this application are not currently commercially available or developed. [40]

Yet another consideration to lower GaAs solar cell costs could be concentrator photovoltaics. Concentrators use lenses or parabolic mirrors to focus light onto a solar cell, and thus a smaller (and therefore less expensive) GaAs solar cell is needed to achieve the same results. [44] Concentrator systems have the highest efficiency of existing photovoltaics. [45]

So, technologies such as concentrator photovoltaics and methods in development to lower epitaxial growth and substrate costs could lead to a reduction in the cost of GaAs solar cells and forge a path for use in terrestrial applications.

Light-emission devices

Band structure of GaAs. The direct gap of GaAs results in efficient emission of infrared light at 1.424 eV (~870 nm). Bandstruktur GaAs en.svg
Band structure of GaAs. The direct gap of GaAs results in efficient emission of infrared light at 1.424 eV (~870 nm).

GaAs has been used to produce near-infrared laser diodes since 1962. [46] It is often used in alloys with other semiconductor compounds for these applications.

N-type GaAs doped with silicon donor atoms (on Ga sites) and boron acceptor atoms (on As sites) responds to ionizing radiation by emitting scintillation photons. At cryogenic temperatures it is among the brightest scintillators known [47] [48] [49] and is a promising candidate for detecting rare electronic excitations from interacting dark matter, due to the following six essential factors:

  1. Silicon donor electrons in GaAs have a binding energy that is among the lowest of all known n-type semiconductors. Free electrons above 8×1015 per cm3 are not “frozen out" and remain delocalized at cryogenic temperatures. [50]
  2. Boron and gallium are group III elements, so boron as an impurity primarily occupies the gallium site. However, a sufficient number occupy the arsenic site and act as acceptors that efficiently trap ionization event holes from the valence band. [51]
  3. After trapping an ionization event hole from the valence band, the boron acceptors can combine radiatively with delocalized donor electrons to produce photons 0.2 eV below the cryogenic band-gap energy (1.52 eV). This is an efficient radiative process that produces scintillation photons that are not absorbed by the GaAs crystal. [48] [49]
  4. There is no afterglow, because metastable radiative centers are quickly annihilated by the delocalized electrons. This is evidenced by the lack of thermally induced luminescence. [47]
  5. N-type GaAs has a high refractive index (~3.5) and the narrow-beam absorption coefficient is proportional to the free electron density and typically several per cm. [52] [53] [54] One would expect that almost all of the scintillation photons should be trapped and absorbed in the crystal, but this is not the case. Recent Monte Carlo and Feynman path integral calculations have shown that the high luminosity could be explained if most of the narrow beam absorption is not absolute absorption but a novel type of optical scattering from the conduction electrons with a cross section of about 5 x 10−18 cm2 that allows scintillation photons to escape total internal reflection. [55] [56] This cross section is about 107 times larger than Thomson scattering but comparable to the optical cross section of the conduction electrons in a metal mirror. [57]
  6. N-type GaAs(Si,B) is commercially grown as 10 kg crystal ingots and sliced into thin wafers as substrates for electronic circuits. Boron oxide is used as an encapsulant to prevent the loss of arsenic during crystal growth, but also has the benefit of providing boron acceptors for scintillation.

Fiber optic temperature measurement

For this purpose an optical fiber tip of an optical fiber temperature sensor is equipped with a gallium arsenide crystal. Starting at a light wavelength of 850 nm GaAs becomes optically translucent. Since the spectral position of the band gap is temperature dependent, it shifts about 0.4 nm/K. The measurement device contains a light source and a device for the spectral detection of the band gap. With the changing of the band gap, (0.4 nm/K) an algorithm calculates the temperature (all 250 ms). [58]

Spin-charge converters

GaAs may have applications in spintronics as it can be used instead of platinum in spin-charge converters and may be more tunable. [59]

Safety

The environment, health and safety aspects of gallium arsenide sources (such as trimethylgallium and arsine) and industrial hygiene monitoring studies of metalorganic precursors have been reported. [60] California lists gallium arsenide as a carcinogen, [61] as do IARC and ECA, [62] and it is considered a known carcinogen in animals. [63] [64] On the other hand, a 2013 review (funded by industry) argued against these classifications, saying that when rats or mice inhale fine GaAs powders (as in previous studies), they get cancer from the resulting lung irritation and inflammation, rather than from a primary carcinogenic effect of the GaAs itself—and that, moreover, fine GaAs powders are unlikely to be created in the production or use of GaAs. [62]

See also

Related Research Articles

A semiconductor is a material that has an electrical conductivity value falling between that of a conductor, such as copper, and an insulator, such as glass. Its resistivity generally falls as its temperature rises; metals behave in the opposite way. In many cases their conducting properties may be altered in useful ways by introducing impurities ("doping") into the crystal structure. When two differently doped regions exist in the same crystal, a semiconductor junction is created. The behavior of charge carriers, which include electrons, ions, and electron holes, at these junctions is the basis of diodes, transistors, and most modern electronics. Some examples of semiconductors are silicon, germanium, gallium arsenide, and elements near the so-called "metalloid staircase" on the periodic table. After silicon, gallium arsenide is the second-most common semiconductor and is used in laser diodes, solar cells, microwave-frequency integrated circuits, and others. Silicon is a critical element for fabricating most electronic circuits.

<span class="mw-page-title-main">Semiconductor device</span> Electronic component that exploits the electronic properties of semiconductor materials

A semiconductor device is an electronic component that relies on the electronic properties of a semiconductor material for its function. Its conductivity lies between conductors and insulators. Semiconductor devices have replaced vacuum tubes in most applications. They conduct electric current in the solid state, rather than as free electrons across a vacuum or as free electrons and ions through an ionized gas.

<span class="mw-page-title-main">Band gap</span> Energy range in a solid where no electron states exist

In solid-state physics and solid-state chemistry, a band gap, also called a bandgap or energy gap, is an energy range in a solid where no electronic states exist. In graphs of the electronic band structure of solids, the band gap refers to the energy difference between the top of the valence band and the bottom of the conduction band in insulators and semiconductors. It is the energy required to promote an electron from the valence band to the conduction band. The resulting conduction-band electron are free to move within the crystal lattice and serve as charge carriers to conduct electric current. It is closely related to the HOMO/LUMO gap in chemistry. If the valence band is completely full and the conduction band is completely empty, then electrons cannot move within the solid because there are no available states. If the electrons are not free to move within the crystal lattice, then there is no generated current due to no net charge carrier mobility. However, if some electrons transfer from the valence band to the conduction band, then current can flow. Therefore, the band gap is a major factor determining the electrical conductivity of a solid. Substances having large band gaps are generally insulators, those with small band gaps are semiconductor, and conductors either have very small band gaps or none, because the valence and conduction bands overlap to form a continuous band.

<span class="mw-page-title-main">Molecular-beam epitaxy</span> Crystal growth process

Molecular-beam epitaxy (MBE) is an epitaxy method for thin-film deposition of single crystals. MBE is widely used in the manufacture of semiconductor devices, including transistors, and it is considered one of the fundamental tools for the development of nanotechnologies. MBE is used to fabricate diodes and MOSFETs at microwave frequencies, and to manufacture the lasers used to read optical discs.

<span class="mw-page-title-main">Gallium nitride</span> Chemical compound

Gallium nitride is a binary III/V direct bandgap semiconductor commonly used in blue light-emitting diodes since the 1990s. The compound is a very hard material that has a Wurtzite crystal structure. Its wide band gap of 3.4 eV affords it special properties for applications in optoelectronic, high-power and high-frequency devices. For example, GaN is the substrate which makes violet (405 nm) laser diodes possible, without requiring nonlinear optical frequency-doubling.

<span class="mw-page-title-main">Indium phosphide</span> Chemical compound

Indium phosphide (InP) is a binary semiconductor composed of indium and phosphorus. It has a face-centered cubic ("zincblende") crystal structure, identical to that of GaAs and most of the III-V semiconductors.

<span class="mw-page-title-main">Doping (semiconductor)</span> Intentional introduction of impurities into an intrinsic semiconductor

In semiconductor production, doping is the intentional introduction of impurities into an intrinsic (undoped) semiconductor for the purpose of modulating its electrical, optical and structural properties. The doped material is referred to as an extrinsic semiconductor.

<span class="mw-page-title-main">Photodetector</span> Sensors of light or other electromagnetic energy

Photodetectors, also called photosensors, are sensors of light or other electromagnetic radiation. There are a wide variety of photodetectors which may be classified by mechanism of detection, such as photoelectric or photochemical effects, or by various performance metrics, such as spectral response. Semiconductor-based photodetectors typically use a p–n junction that converts photons into charge. The absorbed photons make electron–hole pairs in the depletion region. Photodiodes and photo transistors are a few examples of photo detectors. Solar cells convert some of the light energy absorbed into electrical energy.

The heterojunction bipolar transistor (HBT) is a type of bipolar junction transistor (BJT) which uses differing semiconductor materials for the emitter and base regions, creating a heterojunction. The HBT improves on the BJT in that it can handle signals of very high frequencies, up to several hundred GHz. It is commonly used in modern ultrafast circuits, mostly radio frequency (RF) systems, and in applications requiring a high power efficiency, such as RF power amplifiers in cellular phones. The idea of employing a heterojunction is as old as the conventional BJT, dating back to a patent from 1951. Detailed theory of heterojunction bipolar transistor was developed by Herbert Kroemer in 1957.

An epitaxial wafer is a wafer of semiconducting material made by epitaxial growth (epitaxy) for use in photonics, microelectronics, spintronics, or photovoltaics. The epi layer may be the same material as the substrate, typically monocrystaline silicon, or it may be a silicon dioxide (SoI) or a more exotic material with specific desirable qualities. The purpose of epitaxy is to perfect the crystal structure over the bare substrate below and improve the wafer surface's electrical characteristics, making it suitable for highly complex microprocessors and memory devices.

Indium gallium arsenide (InGaAs) is a ternary alloy of indium arsenide (InAs) and gallium arsenide (GaAs). Indium and gallium are group III elements of the periodic table while arsenic is a group V element. Alloys made of these chemical groups are referred to as "III-V" compounds. InGaAs has properties intermediate between those of GaAs and InAs. InGaAs is a room-temperature semiconductor with applications in electronics and photonics.

<span class="mw-page-title-main">Solar cell</span> Photodiode used to produce power from light on a large scale

A solar cell or photovoltaic cell is an electronic device that converts the energy of light directly into electricity by means of the photovoltaic effect. It is a form of photoelectric cell, a device whose electrical characteristics vary when it is exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as "solar panels". The common single-junction silicon solar cell can produce a maximum open-circuit voltage of approximately 0.5 to 0.6 volts.

Thermophotovoltaic (TPV) energy conversion is a direct conversion process from heat to electricity via photons. A basic thermophotovoltaic system consists of a hot object emitting thermal radiation and a photovoltaic cell similar to a solar cell but tuned to the spectrum being emitted from the hot object.

<span class="mw-page-title-main">Multi-junction solar cell</span> Solar power cell with multiple band gaps from different materials

Multi-junction (MJ) solar cells are solar cells with multiple p–n junctions made of different semiconductor materials. Each material's p-n junction will produce electric current in response to different wavelengths of light. The use of multiple semiconducting materials allows the absorbance of a broader range of wavelengths, improving the cell's sunlight to electrical energy conversion efficiency.

Monocrystalline silicon, more often called single-crystal silicon, in short mono c-Si or mono-Si, is the base material for silicon-based discrete components and integrated circuits used in virtually all modern electronic equipment. Mono-Si also serves as a photovoltaic, light-absorbing material in the manufacture of solar cells.

<span class="mw-page-title-main">Thin-film solar cell</span> Type of second-generation solar cell

Thin-film solar cells are made by depositing one or more thin layers of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (µm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 µm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon.

<span class="mw-page-title-main">Sorab K. Ghandhi</span>

Sorab (Soli) K. Ghandhi was a professor Emeritus at Rensselaer Polytechnic Institute (RPI) known for his pioneering work in electrical engineering and microelectronics education, and in the research and development of Organometallic Vapor Phase Epitaxy (OMVPE) for compound semiconductors. He was the recipient of the IEEE Education Award "For pioneering contributions to semiconductor and microelectronics education" in 2010.

Two-photon photovoltaic effect is an energy collection method based on two-photon absorption (TPA). The TPP effect can be thought of as the nonlinear equivalent of the traditional photovoltaic effect involving high optical intensities. This effect occurs when two photons are absorbed at the same time resulting in an electron-hole pair.

Indium gallium arsenide phosphide is a quaternary compound semiconductor material, an alloy of gallium arsenide, gallium phosphide, indium arsenide, or indium phosphide. This compound has applications in photonic devices, due to the ability to tailor its band gap via changes in the alloy mole ratios, x and y.

References

  1. 1 2 3 4 Haynes, p. 4.64
  2. Blakemore, J. S. "Semiconducting and other major properties of gallium arsenide", Journal of Applied Physics, (1982) vol 53 Nr 10 pages R123-R181
  3. Haynes, p. 12.90
  4. 1 2 Haynes, p. 12.86
  5. 1 2 Haynes, p. 12.81
  6. 1 2 3 Moss, S. J.; Ledwith, A. (1987). The Chemistry of the Semiconductor Industry. Springer. ISBN   978-0-216-92005-7.
  7. Scheel, Hans J.; Tsuguo Fukuda. (2003). Crystal Growth Technology. Wiley. ISBN   978-0471490593.
  8. Smart, Lesley; Moore, Elaine A. (2005). Solid State Chemistry: An Introduction. CRC Press. ISBN   978-0-7487-7516-3.
  9. "Chemical vapor deposition from single organometallic precursors" A. R. Barron, M. B. Power, A. N. MacInnes, A. F.Hepp, P. P. Jenkins U.S. patent 5,300,320 (1994)
  10. McCluskey, Matthew D. and Haller, Eugene E. (2012) Dopants and Defects in Semiconductors, pp. 41 and 66, ISBN   978-1439831526
  11. Brozel, M. R.; Stillman, G. E. (1996). Properties of Gallium Arsenide. IEEE Inspec. ISBN   978-0-85296-885-7.
  12. "Oxidative dissolution of gallium arsenide and separation of gallium from arsenic" J. P. Coleman and B. F. Monzyk U.S. patent 4,759,917 (1988)
  13. Lova, Paola; Robbiano, Valentina; Cacialli, Franco; Comoretto, Davide; Soci, Cesare (3 October 2018). "Black GaAs by Metal-Assisted Chemical Etching". ACS Applied Materials & Interfaces. 10 (39): 33434–33440. doi:10.1021/acsami.8b10370. ISSN   1944-8244. PMID   30191706. S2CID   206490133.
  14. 1 2 3 Dennis Fisher; I. J. Bahl (1995). Gallium Arsenide IC Applications Handbook. Vol. 1. Elsevier. p. 61. ISBN   978-0-12-257735-2. 'Clear search' to see pages
  15. Ye, Peide D.; Xuan, Yi; Wu, Yanqing; Xu, Min (2010). "Atomic-Layer Deposited High-k/III-V Metal-Oxide-Semiconductor Devices and Correlated Empirical Model". In Oktyabrsky, Serge; Ye, Peide (eds.). Fundamentals of III-V Semiconductor MOSFETs. Springer Science & Business Media. pp. 173–194. doi:10.1007/978-1-4419-1547-4_7. ISBN   978-1-4419-1547-4.
  16. Šilc, Von Jurij; Robič, Borut; Ungerer, Theo (1999). Processor architecture: from dataflow to superscalar and beyond . Springer. p.  34. ISBN   978-3-540-64798-0.
  17. 1 2 "A reprieve for Moore's Law: milspec chip writes computing's next chapter". Ars Technica. 2016-06-09. Retrieved 2016-06-14.
  18. 1 2 Morgan, D. V.; Board, K. (1991). An Introduction To Semiconductor Microtechnology (2nd ed.). Chichester, West Sussex, England: John Wiley & Sons. p. 137. ISBN   978-0471924784.
  19. Sze, S. M. (1985). Semiconductor Devices Physics and Technology. John Wiley & Sons. Appendix G. ISBN   0-471-87424-8
  20. Single-Crystalline Thin Film. US Department of Energy
  21. Cabrera, Rowan (2019). Electronic Devices and Circuits. EDTECH. p. 35. ISBN   9781839473838 . Retrieved 20 January 2022.
  22. Cutress, Dr Ian. "'Better Yield on 5nm than 7nm': TSMC Update on Defect Rates for N5". www.anandtech.com. Retrieved 2020-08-28.
  23. Schlesinger, T.E. (2001). "Gallium Arsenide". Encyclopedia of Materials: Science and Technology. Elsevier. pp. 3431–3435. doi:10.1016/B0-08-043152-6/00612-4. ISBN   9780080431529 . Retrieved 27 January 2021.
  24. "It's a GaAS: Critical Component for Cell Phone Circuits Grows in 2010". Seeking Alpha. 15 December 2010.
  25. Yin, Jun; Migas, Dmitri B.; Panahandeh-Fard, Majid; Chen, Shi; Wang, Zilong; Lova, Paola; Soci, Cesare (3 October 2013). "Charge Redistribution at GaAs/P3HT Heterointerfaces with Different Surface Polarity". The Journal of Physical Chemistry Letters. 4 (19): 3303–3309. doi:10.1021/jz401485t.
  26. Strobl, G.F.X.; LaRoche, G.; Rasch, K.-D.; Hey, G. (2009). "2: From Extraterrestrial to Terrestrial Applications". High-Efficient Low-Cost Photovoltaics: Recent Developments. Springer. doi:10.1007/978-3-540-79359-5. ISBN   978-3-540-79359-5.
  27. Alferov, Zh. I., V. M. Andreev, M. B. Kagan, I. I. Protasov and V. G. Trofim, 1970, ‘‘Solar-energy converters based on p-n AlxGa1−xAs-GaAs heterojunctions,’’ Fiz. Tekh. Poluprovodn. 4, 2378 (Sov. Phys. Semicond. 4, 2047 (1971))
  28. Nanotechnology in energy applications. im.isu.edu.tw. 16 November 2005 (in Chinese) p. 24
  29. Nobel Lecture by Zhores Alferov at nobelprize.org, p. 6
  30. "Hubble's Instruments Including Control and Support Systems (Cutaway)". HubbleSite.org. Retrieved 2022-10-11.
  31. Schnitzer, I.; et al. (1993). "Ultrahigh spontaneous emission quantum efficiency, 99.7 % internally and 72 % externally, from AlGaAs/GaAs/AlGaAs double heterostructures". Applied Physics Letters. 62 (2): 131. Bibcode:1993ApPhL..62..131S. doi:10.1063/1.109348. S2CID   14611939.
  32. Wang, X.; et al. (2013). "Design of GaAs Solar Cells Operating Close to the Shockley–Queisser Limit". IEEE Journal of Photovoltaics. 3 (2): 737. doi:10.1109/JPHOTOV.2013.2241594. S2CID   36523127.
  33. "Record Efficiency of 68.9% for GaAs Thin Film Photovoltaic Cell Under Laser Light - Fraunhofer ISE". Fraunhofer Institute for Solar Energy Systems ISE. 28 June 2021. Retrieved 2022-10-11.
  34. Yamaguchi, Masafumi (2021-04-14), Muzibur Rahman, Mohammed; Mohammed Asiri, Abdullah; Khan, Anish; Inamuddin (eds.), "High-Efficiency GaAs-Based Solar Cells", Post-Transition Metals, IntechOpen, doi: 10.5772/intechopen.94365 , ISBN   978-1-83968-260-5, S2CID   228807831 , retrieved 2022-10-11
  35. "Rocket Lab unveils space solar cell with 33.3% efficiency". solarparts (in Korean). 10 March 2022. Retrieved 2022-10-12.
  36. Duda, Anna; Ward, Scott; Young, Michelle (February 2012). "Inverted Metamorphic Multijunction (IMM) Cell Processing Instructions" (PDF). National Renewable Energy Laboratory. Retrieved October 11, 2022.
  37. Glasgow University report on CERN detector. Ppewww.physics.gla.ac.uk. Retrieved on 2013-10-16.
  38. Haegel, Nancy; Kurtz, Sarah (November 2021). "Global Progress Toward Renewable Electricity: Tracking the Role of Solar". IEEE Journal of Photovoltaics. 11 (6) (published 20 September 2021): 1335–1342. doi: 10.1109/JPHOTOV.2021.3104149 . ISSN   2156-3381. S2CID   239038321.
  39. Papež, Nikola; Gajdoš, Adam; Dallaev, Rashid; Sobola, Dinara; Sedlák, Petr; Motúz, Rastislav; Nebojsa, Alois; Grmela, Lubomír (2020-04-30). "Performance analysis of GaAs based solar cells under gamma irradiation". Applied Surface Science. 510: 145329. Bibcode:2020ApSS..51045329P. doi:10.1016/j.apsusc.2020.145329. ISSN   0169-4332. S2CID   213661192.
  40. 1 2 3 4 Horowitz, Kelsey A.; Remo, Timothy W.; Smith, Brittany; Ptak, Aaron J. (2018-11-27). "A Techno-Economic Analysis and Cost Reduction Roadmap for III-V Solar Cells". doi:10.2172/1484349. OSTI   1484349. S2CID   139380070.{{cite journal}}: Cite journal requires |journal= (help)
  41. Konagai, Makoto; Sugimoto, Mitsunori; Takahashi, Kiyoshi (1978-12-01). "High efficiency GaAs thin film solar cells by peeled film technology". Journal of Crystal Growth. 45: 277–280. Bibcode:1978JCrGr..45..277K. doi: 10.1016/0022-0248(78)90449-9 . ISSN   0022-0248.
  42. Cheng, Cheng-Wei; Shiu, Kuen-Ting; Li, Ning; Han, Shu-Jen; Shi, Leathen; Sadana, Devendra K. (2013-03-12). "Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronics". Nature Communications. 4 (1): 1577. Bibcode:2013NatCo...4.1577C. doi: 10.1038/ncomms2583 . ISSN   2041-1723. PMID   23481385. S2CID   205315999.
  43. Metaferia, Wondwosen; Chenenko, Jason; Packard, Corinne E.; Ptak, Aaron J.; Schulte, Kevin L. (2021-06-20). "(110)-Oriented GaAs Devices and Spalling as a Platform for Low-Cost III-V Photovoltaics". 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC). Fort Lauderdale, FL, USA: IEEE. pp. 1118–1120. doi:10.1109/PVSC43889.2021.9518754. ISBN   978-1-6654-1922-2. OSTI   1869274. S2CID   237319505.
  44. Papež, Nikola; Dallaev, Rashid; Ţălu, Ştefan; Kaštyl, Jaroslav (2021-06-04). "Overview of the Current State of Gallium Arsenide-Based Solar Cells". Materials. 14 (11): 3075. Bibcode:2021Mate...14.3075P. doi: 10.3390/ma14113075 . ISSN   1996-1944. PMC   8200097 . PMID   34199850.
  45. Philipps, Simon P.; Bett, Andreas W.; Horowitz, Kelsey; Kurtz, Sarah (2015-12-01). "Current Status of Concentrator Photovoltaic (CPV) Technology". doi: 10.2172/1351597 . OSTI   1351597.{{cite journal}}: Cite journal requires |journal= (help)
  46. Hall, Robert N.; Fenner, G. E.; Kingsley, J. D.; Soltys, T. J.; Carlson, R. O. (1962). "Coherent Light Emission From GaAs Junctions". Physical Review Letters. 9 (9): 366–369. Bibcode:1962PhRvL...9..366H. doi: 10.1103/PhysRevLett.9.366 .
  47. 1 2 Derenzo, S.; Bourret, E.; Hanrahan, S.; Bizarri, G. (2018). "Cryogenic scintillation properties of n-type GaAs for the direct detection of MeV/c2 dark matter". Journal of Applied Physics. 123 (11): 114501. arXiv:1802.09171. Bibcode:2018JAP...123k4501D. doi:10.1063/1.5018343. S2CID 56118568
  48. 1 2 Vasiukov, S.; Chiossi, F.; Braggio, C.; Carugno, G.; Moretti, F.; Bourret, E.; Derenzo, S. (2019). "GaAs as a Bright Cryogenic Scintillator for the Detection of Low-Energy Electron Recoils from MeV/c2 Dark Matter". IEEE Transactions on Nuclear Science. 66 (11): 2333–2337. Bibcode:2019ITNS...66.2333V. doi:10.1109/TNS.2019.2946725. S2CID 208208697
  49. 1 2 Derenzo, S.; Bourret, E.; Frank-Rotsch, C.; Hanrahan, S.; Garcia-Sciveres, M. (2021). "How silicon and boron dopants govern the cryogenic scintillation properties of n-type GaAs". Nuclear Instruments and Methods in Physics Research Section A. 989: 164957. arXiv:2012.07550. Bibcode:2021NIMPA.98964957D. doi:10.1016/j.nima.2020.164957. S2CID 229158562
  50. Benzaquen, M.; Walsh, D.; Mazuruk, K. (1987). "Conductivity of n-type GaAs near the Mott transition". Physical Review B. 36 (9): 4748–4753. Bibcode:1987PhRvB..36.4748B. doi:10.1103/PhysRevB.36.4748. PMID 9943488
  51. Pätzold, O.; Gärtner, G.; Irmer, G. (2002). "Boron Site Distribution in Doped GaAs". Physica Status Solidi B. 232 (2): 314–322. Bibcode:2002PSSBR.232..314P. doi:10.1002/1521-3951(200208)232:2<314::AID-PSSB314>3.0.CO;2-#.
  52. Spitzer, W. G.; Whelan, J. M. (1959). "Infrared Absorption and Electron Effective Mass in n-type Gallium Arsenide". Physical Review. 114 (1): 59–63. Bibcode:1959PhRv..114...59S. doi:10.1103/PhysRev.114.59
  53. Sturge, M. D. (1962). "Optical Absorption of Gallium Arsenide between 0.6 and 2.75 eV". Physical Review. 127 (3): 768–773. Bibcode:1962PhRv..127..768S. doi:10.1103/PhysRev.127.768
  54. Osamura, Kozo; Murakami, Yotaro (1972). "Free Carrier Absorption in n-GaAs". Japanese Journal of Applied Physics. 11 (3): 365–371. Bibcode:1972JaJAP..11..365O. doi:10.1143/JJAP.11.365. S2CID 120981460
  55. Derenzo, Stephen E. (2022). "Monte Carlo calculations of the extraction of scintillation light from cryogenic n-type GaAs". Nuclear Instruments and Methods in Physics Research Section A. 1034: 166803. arXiv: 2203.15056 . Bibcode:2022NIMPA103466803D. doi:10.1016/j.nima.2022.166803. S2CID   247779262.
  56. S. E. Derenzo (2023), “Feynman photon path integral calculations of optical reflection, diffraction, and scattering from conduction electrons,” Nuclear Instruments and Methods, vol. A1056, pp. 168679. arXiv2309.09827
  57. M. K. Pogodaeva, S. V. Levchenko, V. P. Drachev, and I. R. Gabitov, 3032, “Dielectric function of six elemental metals,” J. Phys.: Conf. Ser., vol. 1890, pp. 012008.
  58. A New Fiber Optical Thermometer and Its Application for Process Control in Strong Electric, Magnetic, and Electromagnetic Fields Archived 2014-11-29 at the Wayback Machine . optocon.de (PDF; 2,5 MB)
  59. GaAs forms basis of tunable spintronics. compoundsemiconductor.net. September 2014
  60. Shenai-Khatkhate, D V; Goyette, R; DiCarlo, R L; Dripps, G (2004). "Environment, health and safety issues for sources used in MOVPE growth of compound semiconductors". Journal of Crystal Growth. 272 (1–4): 816–821. Bibcode:2004JCrGr.272..816S. doi:10.1016/j.jcrysgro.2004.09.007.
  61. "Chemicals Listed Effective August 1, 2008 as Known to the State of California to Cause Cancer or Reproductive Toxicity: gallium arsenide, hexafluoroacetone, nitrous oxide and vinyl cyclohexene dioxide". OEHHA. 2008-08-01.
  62. 1 2 Bomhard, E. M.; Gelbke, H.; Schenk, H.; Williams, G. M.; Cohen, S. M. (2013). "Evaluation of the carcinogenicity of gallium arsenide". Critical Reviews in Toxicology. 43 (5): 436–466. doi:10.3109/10408444.2013.792329. PMID   23706044. S2CID   207505903.
  63. "NTP Technical Report On The Toxicology And Carcinogenesis Studies Of Gallium Arsenide (Cas No. 1303-00-0) In F344/N Rats And B6c3f1 Mice (Inhalation Studies)" (PDF). U.S. Department Of Health And Human Services: Public Health Service: National Institutes of Health. September 2000.
  64. "Safety Data Sheet: Gallium Arsenide". Sigma-Aldrich. 2015-02-28.

Cited sources