IMT-2020

Last updated

International Mobile Telecommunications-2020 (IMT-2020 Standard) are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2015 for 5G networks, devices and services. [1]

Contents

On February 1, 2021, the standard was published as Recommendation ITU-R M.2150-0 titled Detailed specifications of the radio interfaces of IMT-2020, [2] but most of it was finalized years earlier. [3] For example the requirements for radio access technologies listed below were adopted in November 2017. [4] Following the publication of the requirements the developers of radio access technologies such as 3GPP and ETSI are expected to develop 5G technologies meeting these requirements. 3GPP is developing radio access technologies 5G NR, LTE-M and NB-IoT that together are expected to meet all requirements, [5] while ETSI is developing DECT-2020 NR and Nufront is developing EUHT (Enhanced Ultra High Throughput).

Requirements

The following parameters are the requirements for IMT-2020 5G candidate radio access technologies. [6] Note that these requirements are not intended to restrict the full range of capabilities or performance that candidate for IMT-2020 might achieve, nor are they intended to describe how the technologies might perform in actual deployments.

CapabilityDescription5G requirement Usage scenario
Downlink peak data rate Minimum maximum data rate technology must support20 Gbit/s eMBB
Uplink peak data rate10 Gbit/s eMBB
User experienced downlink data rateData rate in dense urban test environment 95% of time100 Mbit/seMBB
User experienced uplink data rate50 Mbit/seMBB
Latency Radio network contribution to packet travel time4 mseMBB
1 ms URLLC
MobilityMaximum speed for handoff and QoS requirements500 km/heMBB/URLLC
Connection densityTotal number of devices per unit area106/km2 mMTC
Energy efficiency Data sent/received per unit energy consumption (by device or network)Equal to 4GeMBB
Area traffic capacityTotal traffic across coverage area10 Mbps/m2eMBB
Peak downlink spectrum efficiency Throughput per unit wireless bandwidth and per network cell30 bit/s/HzeMBB

Related Research Articles

<span class="mw-page-title-main">Enhanced Data rates for GSM Evolution</span> Digital mobile phone technology

Enhanced Data rates for GSM Evolution (EDGE) also known as Enhanced GPRS (EGPRS), IMT Single Carrier (IMT-SC), or Enhanced Data rates for Global Evolution) is a digital mobile phone technology that allows improved data transmission rates as a backward-compatible extension of GSM. EDGE is considered a pre-3G radio technology and is part of ITU's 3G definition. EDGE was deployed on GSM networks beginning in 2003 – initially by Cingular in the United States.

The Universal Mobile Telecommunications System (UMTS) is a third generation mobile cellular system for networks based on the GSM standard. Developed and maintained by the 3GPP, UMTS is a component of the International Telecommunication Union IMT-2000 standard set and compares with the CDMA2000 standard set for networks based on the competing cdmaOne technology. UMTS uses wideband code-division multiple access (W-CDMA) radio access technology to offer greater spectral efficiency and bandwidth to mobile network operators.

<span class="mw-page-title-main">SIM card</span> Integrated circuit card for a mobile device

A SIM card is an integrated circuit (IC) intended to securely store the international mobile subscriber identity (IMSI) number and its related key, which are used to identify and authenticate subscribers on mobile telephony devices. Technically the actual physical card is known as a universal integrated circuit card (UICC); this smart card is usually made of PVC with embedded contacts and semiconductors, with the SIM as its primary component. In practice the term "SIM card" refers to the entire unit and not simply the IC.

<span class="mw-page-title-main">3G</span> Third generation of wireless mobile telecommunications technology

3G is the third generation of wireless mobile telecommunications technology. It is the upgrade over 2G, 2.5G, GPRS and 2.75G Enhanced Data Rates for GSM Evolution networks, offering faster data transfer, and better voice quality. This network was superseded by 4G, and later on by 5G. This network is based on a set of standards used for mobile devices and mobile telecommunications use services and networks that comply with the International Mobile Telecommunications-2000 (IMT-2000) specifications by the International Telecommunication Union. 3G finds application in wireless voice telephony, mobile Internet access, fixed wireless Internet access, video calls and mobile TV.

The 3rd Generation Partnership Project (3GPP) is an umbrella term for a number of standards organizations which develop protocols for mobile telecommunications. Its best known work is the development and maintenance of:

<span class="mw-page-title-main">CDMA2000</span> Family of 3G mobile technology standards

CDMA2000 is a family of 3G mobile technology standards for sending voice, data, and signaling data between mobile phones and cell sites. It is developed by 3GPP2 as a backwards-compatible successor to second-generation cdmaOne (IS-95) set of standards and used especially in North America and South Korea.

IMT-2000 is the global standard for third generation (3G) wireless communications as defined by the International Telecommunication Union.

4G is the fourth generation of broadband cellular network technology, succeeding 3G and preceding 5G. A 4G system must provide capabilities defined by ITU in IMT Advanced. Potential and current applications include amended mobile web access, IP telephony, gaming services, high-definition mobile TV, video conferencing, and 3D television.

<span class="mw-page-title-main">E-UTRA</span> 3GPP interface

E-UTRA is the air interface of 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) upgrade path for mobile networks. It is an acronym for Evolved Universal Mobile Telecommunications System (UMTS) Terrestrial Radio Access, also referred to as the 3GPP work item on the Long Term Evolution (LTE) also known as the Evolved Universal Terrestrial Radio Access (E-UTRA) in early drafts of the 3GPP LTE specification. E-UTRAN is the initialism of Evolved UMTS Terrestrial Radio Access Network and is the combination of E-UTRA, user equipment (UE), and E-UTRAN Node B or Evolved Node B (eNodeB).

The UMTS frequency bands are radio frequencies used by third generation (3G) wireless Universal Mobile Telecommunications System networks. They were allocated by delegates to the World Administrative Radio Conference (WARC-92) held in Málaga-Torremolinos, Spain between 3 February 1992 and 3 March 1992. Resolution 212 (Rev.WRC-97), adopted at the World Radiocommunication Conference held in Geneva, Switzerland in 1997, endorsed the bands specifically for the International Mobile Telecommunications-2000 (IMT-2000) specification by referring to S5.388, which states "The bands 1,885-2,025 MHz and 2,110-2,200 MHz are intended for use, on a worldwide basis, by administrations wishing to implement International Mobile Telecommunications 2000 (IMT-2000). Such use does not preclude the use of these bands by other services to which they are allocated. The bands should be made available for IMT-2000 in accordance with Resolution 212 ." To accommodate the reality that these initially defined bands were already in use in various regions of the world, the initial allocation has been amended multiple times to include other radio frequency bands.

The Global mobile Suppliers Association (GSA) is a not-for-profit industry organisation representing suppliers in the mobile communication industry. GSA actively promotes 3GPP technology such as 3G; 4G; 5G. GSA is a market representation partner in 3GPP and co-operates with organisations including COAI, ETSI, GSMA, ICU, ITU, European Conference of Postal and Telecommunications Administrations (CEPT-ECC), other regional regulatory bodies and other industry associations.

<span class="mw-page-title-main">LTE Advanced</span> Mobile communication standard

LTE Advanced (LTE+) is a mobile communication standard and a major enhancement of the Long Term Evolution (LTE) standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10.

<span class="mw-page-title-main">LTE (telecommunication)</span> Standard for wireless broadband communication for mobile devices

In telecommunications, long-term evolution (LTE) is a standard for wireless broadband communication for mobile devices and data terminals, based on the GSM/EDGE and UMTS/HSPA standards. It improves on those standards' capacity and speed by using a different radio interface and core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. Because LTE frequencies and bands differ from country to country, only multi-band phones can use LTE in all countries where it is supported.

International Mobile Telecommunications-Advanced are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2008 for what is marketed as 4G mobile phone and Internet access service.

<span class="mw-page-title-main">5G</span> Broadband cellular network standard

In telecommunications, 5G is the fifth-generation technology standard for broadband cellular networks, which cellular phone companies began deploying worldwide in 2019, and is the planned successor to the 4G networks which provide connectivity to most current cellphones.

<span class="mw-page-title-main">Next Generation Mobile Networks</span>

The Next Generation Mobile Networks (NGMN) Alliance is a mobile telecommunications association of mobile operators, vendors, manufacturers and research institutes. It was founded by major mobile operators in 2006 as an open forum to evaluate candidate technologies to develop a common view of solutions for the next evolution of wireless networks. Its objective is to ensure the successful commercial launch of future mobile broadband networks through a roadmap for technology and friendly user trials. Its office is in Frankfurt, Germany.

<span class="mw-page-title-main">Vehicle-to-everything</span> Communication between a vehicle and any entity that may affect the vehicle

Vehicle-to-everything (V2X) is communication between a vehicle and any entity that may affect, or may be affected by, the vehicle. It is a vehicular communication system that incorporates other more specific types of communication as V2I (vehicle-to-infrastructure), V2N (vehicle-to-network), V2V (vehicle-to-vehicle), V2P (vehicle-to-pedestrian), V2D (vehicle-to-device).

5G NR is a new radio access technology (RAT) developed by 3GPP for the 5G mobile network. It was designed to be the global standard for the air interface of 5G networks. As with 4G (LTE), it is based on OFDM.

CDMA frequency bands or frequency ranges are the cellular frequencies designated by the ITU for the operation of cdmaOne and CDMA2000 mobile phones and other mobile devices.

References

  1. "ITU defines vision and roadmap for 5G mobile development". www.itu.int. Archived from the original on 2020-05-23. Retrieved 2019-04-15.
  2. "ITU towards "IMT for 2020 and beyond"". ITU. Retrieved 2021-08-17.
  3. "What Is IMT-2020?". SDxCentral.
  4. "Minimum requirements related to technical performance for IMT-2020 radio interface(s)". ITU. November 2017. Retrieved 28 August 2019.
  5. "LTE-M and NB-IoT meet the 5G performance requirements". ITU. 9 December 2018. Retrieved 28 August 2019.
  6. "Minimum requirements related to technical performance for IMT-2020 radio interface(s)" (PDF). ITU. November 2017. Retrieved 28 August 2019.