Speakerphone

Last updated

A speakerphone is a telephone with a microphone and loudspeaker provided separately from those in the handset. [1] This device allows multiple persons to participate in a conversation. The loudspeaker broadcasts the voice or voices of those on the other end of the telephone line, while the microphone captures all voices of those using the speakerphone. The term speakerphone is also sometimes used for loudspeaker, as in "put it on speakerphone".

Contents

Many telephones have an integrated speakerphone function which can be activated by pushing a single button. This button transfers the sound input and output from the handset to the ambient microphone and loudspeaker. Devices designed specifically for speakerphone use often have multiple microphone inputs arranged radially around the device to maximize sound input, such as may occur around a conference table. The most sophisticated units allow the connection of additional satellite microphones that can be placed some distance from the main unit.

Types of speakerphones

Speakerphones may be broadly divided into two classes of Duplex:

Half-duplex speakerphones allow sound to travel only in one direction at a time, either: 1) into the speakerphone from the telephone line and out of its internal speaker to its user, or 2) from its user, into the microphone, and out through the telephone line. While the users of the speakerphone are speaking, the phone only transmits sound to the telephone line; its internal speaker is cut off and no sound arriving from the telephone line can be heard by the user. While the user of the speakerphone is quiet, the speakerphone only receives sound from the telephone line and its internal speaker broadcasts that sound to its user. There is a very definite, noticeable switching action each time the phone "changes directions" and a cough or other transient noise in the room may interrupt incoming sound from the far end of the telephone connection.

Full-duplex speakerphones are able to transmit and receive simultaneously and there is no discernible change of transmission direction. These phones are much more complicated and often employ sophisticated digital signal processing algorithms to sort out the incoming sound and the sound in the room for echo cancellation. Their cost is also higher than for a half-duplex speakerphone.

Speakerphone setup

Many modern speakerphones must first be calibrated to the acoustic characteristics of the room in which they will be used. During this calibration phase, they may make a variety of noises including ascending tones or chiming sounds. This calibration may be automatic or manually invoked by the user, and it may need to be repeated if the speakerphone is relocated within the room. A failure to be properly calibrated can be indicated by the occurrence of echoing, ringing sounds, or feedback.

Handset vs. base speakerphone

Many cordless telephones have a handset speakerphone as well as a base speakerphone. The handset speakerphone allows hands free conversations away from the base unit. The base speakerphone is located in the base unit. The user must be at the base unit, but still gets the added benefits of having hands free conversations. Most base speakerphones have a secondary keypad for dialing calls on the base unit.

See also

Related Research Articles

<span class="mw-page-title-main">Telephone</span> Telecommunications device

A telephone is a telecommunications device that permits two or more users to conduct a conversation when they are too far apart to be easily heard directly. A telephone converts sound, typically and most efficiently the human voice, into electronic signals that are transmitted via cables and other communication channels to another telephone which reproduces the sound to the receiving user. The term is derived from Greek: τῆλε and φωνή, together meaning distant voice. A common short form of the term is phone, which came into use early in the telephone's history.

<span class="mw-page-title-main">Acoustic coupler</span>

In telecommunications, an acoustic coupler is an interface device for coupling electrical signals by acoustical means—usually into and out of a telephone.

In radio communication, a transceiver is an electronic device which is a combination of a radio transmitter and a receiver, hence the name. It can both transmit and receive radio waves using an antenna, for communication purposes. These two related functions are often combined in a single device to reduce manufacturing costs. The term is also used for other devices which can both transmit and receive through a communications channel, such as optical transceivers which transmit and receive light in optical fiber systems, and bus transceivers which transmit and receive digital data in computer data buses.

In telecommunications, a voice operated switch, also known as VOX or voice-operated exchange, is a switch that operates when sound over a certain threshold is detected. It is usually used to turn on a transmitter or recorder when someone speaks and turn it off when they stop speaking. It is used instead of a push-to-talk button on transmitters or to save storage space on recording devices. On cell phones, it is used to save battery life. Intercom systems that use a speaker in a room as both a speaker and a microphone will often use VOX on the main console to switch the audio direction during a conversation. The circuit usually includes a delay between the sound stopping and switching direction, to avoid the circuit turning off during short pauses in speech.

<span class="mw-page-title-main">Headphones</span> Device placed near the ears that plays sound

Headphones are a pair of small loudspeaker drivers worn on or around the head over a user's ears. They are electroacoustic transducers, which convert an electrical signal to a corresponding sound. Headphones let a single user listen to an audio source privately, in contrast to a loudspeaker, which emits sound into the open air for anyone nearby to hear. Headphones are also known as earphones or, colloquially, cans. Circumaural and supra-aural headphones use a band over the top of the head to hold the drivers in place. Another type, known as earbuds or earpieces, consists of individual units that plug into the user's ear canal. A third type are bone conduction headphones, which typically wrap around the back of the head and rest in front of the ear canal, leaving the ear canal open. In the context of telecommunication, a headset is a combination of a headphone and microphone.

<span class="mw-page-title-main">Mixing console</span> Device used for audio mixing

A mixing console or mixing desk is an electronic device for mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals from electric or electronic instruments, or recorded sounds. Mixers may control analog or digital signals. The modified signals are summed to produce the combined output signals, which can then be broadcast, amplified through a sound reinforcement system or recorded.

<span class="mw-page-title-main">Push-to-talk</span> Protocol in half-duplex telecommunication devices

Push-to-talk (PTT), also known as press-to-transmit, is a method of having conversations or talking on half-duplex communication lines, including two-way radio, using a momentary button to switch from voice reception mode to transmit mode.

<span class="mw-page-title-main">Telephone call</span> Connection between two or more people over a telephone network

A telephone call or telephone conversation, also known as a phone call or voice call, is a connection over a telephone network between the called party and the calling party. Telephone calls started in the late 19th century. As technology has improved, a majority of telephone calls are made over a cellular network through mobile phones or over the internet with Voice over IP. Telephone calls are typically used for real-time conversation between two or more parties, especially when the parties cannot meet in person.

<span class="mw-page-title-main">Public address system</span> Electronic system for amplifying sound

A public address system is an electronic system comprising microphones, amplifiers, loudspeakers, and related equipment. It increases the apparent volume (loudness) of a human voice, musical instrument, or other acoustic sound source or recorded sound or music. PA systems are used in any public venue that requires that an announcer, performer, etc. be sufficiently audible at a distance or over a large area. Typical applications include sports stadiums, public transportation vehicles and facilities, and live or recorded music venues and events. A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.

<span class="mw-page-title-main">Sound reinforcement system</span> Amplified sound system for public events

A sound reinforcement system is the combination of microphones, signal processors, amplifiers, and loudspeakers in enclosures all controlled by a mixing console that makes live or pre-recorded sounds louder and may also distribute those sounds to a larger or more distant audience. In many situations, a sound reinforcement system is also used to enhance or alter the sound of the sources on the stage, typically by using electronic effects, such as reverb, as opposed to simply amplifying the sources unaltered.

<span class="mw-page-title-main">Cordless telephone</span> Portable telephone that connects to a landline

A cordless telephone or portable telephone has a portable telephone handset that connects by radio to a base station connected to the public telephone network. The operational range is limited, usually to the same building or within some short distance from the base station.

<span class="mw-page-title-main">Telephone hybrid</span> Telephone circuit element

In analog telephony, a telephone hybrid is the component at the ends of a subscriber line of the public switched telephone network (PSTN) that converts between two-wire and four-wire forms of bidirectional audio paths. When used in broadcast facilities to enable the airing of telephone callers, the broadcast-quality telephone hybrid is known as a broadcast telephone hybrid or telephone balance unit.

<span class="mw-page-title-main">Intercom</span> Voice communications system for use within a local area

An intercom, also called an intercommunication device, intercommunicator, or interphone, is a stand-alone voice communications system for use within a building, small collection of buildings or portably within a small coverage area, which functions independently of the public telephone network. Intercoms are generally mounted permanently in buildings and vehicles, but can also be detachable and portable. Intercoms can incorporate connections to public address loudspeaker systems, walkie talkies, telephones, and other intercom systems. Some intercom systems incorporate control of devices such as signal lights and door latches.

<span class="mw-page-title-main">VoIP phone</span> Phone using one or more VoIP technologies

A VoIP phone or IP phone uses voice over IP technologies for placing and transmitting telephone calls over an IP network, such as the Internet. This is in contrast to a standard phone which uses the traditional public switched telephone network (PSTN).

<span class="mw-page-title-main">Hook flash</span> Telephone signal

On analog telephone lines with special services, a flash or register-recall signal is used to control functions on the public telephone exchange, PBX or VoIP ATA.

A duplex communication system is a point-to-point system composed of two or more connected parties or devices that can communicate with one another in both directions. Duplex systems are employed in many communications networks, either to allow for simultaneous communication in both directions between two connected parties or to provide a reverse path for the monitoring and remote adjustment of equipment in the field. There are two types of duplex communication systems: full-duplex (FDX) and half-duplex (HDX).

Sidetone is audible feedback to someone speaking or otherwise producing sound as an indication of active transmission. Sidetone is introduced by some communications circuits and anti-sidetone circuitry is used to control its level.

<span class="mw-page-title-main">Audio headset</span> Telephone or computer accessory

A headset is a combination of headphone and microphone. Headsets connect over a telephone or to a computer, allowing the user to speak and listen while keeping both hands free. They are commonly used in customer service and technical support centers, where employees can converse with customers while typing information into a computer. They are also common among computer gamers and let them talk with each other and hear others while using their keyboards and mice to play the game.

Echo suppression and echo cancellation are methods used in telephony to improve voice quality by preventing echo from being created or removing it after it is already present. In addition to improving subjective audio quality, echo suppression increases the capacity achieved through silence suppression by preventing echo from traveling across a telecommunications network. Echo suppressors were developed in the 1950s in response to the first use of satellites for telecommunications.

References

  1. "Definition of SPEAKERPHONE". www.merriam-webster.com.