The Heckler & Koch MP5 (German : Maschinenpistole 5) is a submachine gun developed in the 1960s by German firearms manufacturer Heckler & Koch. It uses a similar modular design to the Heckler & Koch G3, and has over 100 variants and clones, [14] including selective fire, semi-automatic, suppressed, compact, and even marksman variants. [15] The MP5 is one of the most widely used submachine guns in the world, having been adopted by over forty nations and numerous militaries, police forces, intelligence agencies, security organizations, paramilitaries, and non-state actors. [16]
Attempts at replacing the MP5 by Heckler & Koch began in the 1980s, but despite functional prototype weapons having promising performance, a formal successor did not enter commercial production until 1999, when Heckler & Koch developed the UMP. [17] Despite being more expensive however, the MP5 remained the more successful of the two options, owing to its preexisting widespread use, design familiarity, and lower recoil due to its roller-delayed action as opposed to the UMP's straight blowback action. [18]
Heckler & Koch, encouraged by the success of the G3 battle rifle, developed a family of small arms consisting of four types of firearms all based on a common G3 design layout and operating principle. The first type was chambered for 7.62×51mm NATO, the second for the 7.62×39mm M43, the third for 5.56×45mm NATO, and the fourth for the 9×19mm Parabellum. The MP5 was created for the fourth type, and was initially known as the HK54; under the HK naming system, this categorizes it as a selective fire carbine chambered in a handgun cartridge. [19]
Development began in 1964, and in 1966 the HK54 was adopted by the Bundesgrenzschutz and by Bundeswehr special forces, initially as the MP64, before being redesignated as the MP5. [19] The MP5A1 was introduced in the late 1960s and was the first model to feature the front ring sight and "Slimline" handguard. In 1970, the MP5 and MP5A1 were superseded by the MP5A2 and MP5A3, improvements to the MP5A1 with a fixed stock and retracting stock respectively. In 1974, the MP5SD, an integrally-suppressed variant, was introduced, and in 1976, the MP5K, a redesigned compact variant, was developed per a request for a variant that suited close-quarters combat in South America. In 1977, the original straight magazines were replaced by curved steel magazines. In 1978, the "Tropical" handguard was introduced for the MP5.
In 1980, the MP5 achieved an iconic status during the Iranian Embassy siege, when British Army Special Air Service operatives used MP5s with top-mounted flashlights to assault the embassy and rescue the hostages held inside. Photos of the operation featuring MP5s were widely disseminated in the press and popular media, and drove other military and police units to purchase MP5s as well, quickly making the MP5 widely recognizable and associated with elite counterterrorist units. [20] The MP5 has since become a mainstay in militaries, special forces, and police tactical units across the world, but has gradually been replaced since the late 1990s by rifles, carbines, and personal defense weapons due to changes in armament trends, including growing access to body armor that can stop handgun cartridges. [21]
The MP5 is manufactured under license in several nations including Greece (formerly Hellenic Arms Industry, currently Hellenic Defence Systems), Iran (Defense Industries Organization), Mexico (SEDENA), Pakistan (Pakistan Ordnance Factories), Saudi Arabia, Sudan (Military Industry Corporation), Turkey (MKEK), and the United Kingdom (formerly Royal Ordnance, later moved to Heckler & Koch Great Britain). [22]
The primary version of the MP5 family is the MP5A2, which is a lightweight, air-cooled, selective fire delayed blowback operated 9×19mm Parabellum weapon with a roller-delayed bolt. It fires from a closed bolt (bolt forward) position. [23]
The fixed, free-floating, cold hammer-forged barrel has six right-hand grooves with a 1 in 250 mm (1:10 in) rifling twist rate and is pressed and pinned into the receiver. [24]
The first MP5 models used a double-column straight box magazine, but since 1977, slightly curved steel magazines have been used with a 15-round capacity (weighing 0.12 kg) or a 30-round capacity (0.17 kg empty). [24]
The adjustable iron sights (closed type) consist of a rotating rear diopter drum and a front post installed in a hooded ring. The rear sight is mechanically adjustable for both windage and elevation with the use of a special tool, being adjusted at the factory for firing at 25 metres (27 yd) with standard 8 grams (123 gr) FMJ 9×19mm NATO ammunition. The rear sight drum provides four apertures of varying diameters used to adjust the diopter system, according to the user's preference and tactical situation. [25] Changing between apertures does not change the point of impact down range.
The MP5 has a hammer firing mechanism. The trigger group is housed inside an interchangeable polymer trigger module (with an integrated pistol grip) and equipped with a three-position fire mode selector that serves as the manual safety toggle. Per HK trigger group standards, most MP5 variants have the option of "SEF" or "Navy" trigger groups, with further alterations based on the availability and type of burst fire; the "SE" and "0-1" trigger groups are only available for semi-automatic and civilian variants. While the "SEF" trigger group's fire selector lever is located on the left-hand side of the trigger, the SEF symbols themselves appear on both sides of the trigger grouping; the "Navy" trigger group, among others, are ambidextrous. The safety/selector is rotated into the various firing settings or safety position by depressing the tail end of the lever. Tactile clicks (stops) are present at each position to provide a positive stop and prevent inadvertent rotation. The "safe" setting disables the trigger by blocking the hammer release with a solid section of the safety axle located inside the trigger housing. [24]
The non-reciprocating cocking handle is located above the handguard and protrudes from the cocking handle tube at approximately a 45° angle. This rigid control is attached to a tubular piece within the cocking lever housing called the cocking lever support, which in turn makes contact with the forward extension of the bolt group. It is not however connected to the bolt carrier and therefore cannot be used as a forward assist to fully seat the bolt group. The cocking handle is held in a forward position by a spring detent located in the front end of the cocking lever support which engages in the cocking lever housing. The lever is locked back by pulling it fully to the rear and rotating it slightly clockwise where it can be hooked into an indent in the cocking lever tube. [24]
The bolt rigidly engages the barrel extension—a cylindrical component welded to the receiver into which the barrel is pinned. The delay mechanism is of the same design as that used in the G3 rifle. The two-part bolt consists of a bolt head with rollers and a bolt carrier. The heavier bolt carrier lies up against the bolt head when the weapon is ready to fire and inclined planes on the front locking piece lie between the rollers and force them out into recesses in the barrel extension. [26]
When fired, expanding propellant gases produced from the burning powder in the cartridge exert rearward pressure on the bolt head transferred through the base of the cartridge case as it is propelled out of the chamber. A portion of this force is transmitted through the rollers projecting from the bolt head, which are cammed inward against the inclined flanks of the locking recesses in the barrel extension and to the angled shoulders of the locking piece. The selected angles of the recesses and the incline on the locking piece produce a velocity ratio of about 4:1 between the bolt carrier and the bolt head. This results in a calculated delay, allowing the projectile to exit the barrel and gas pressure to drop to a safe level before the case is extracted from the chamber. [26]
The delay results from the amount of time it takes for enough recoil energy to be transferred through to the bolt carrier in a sufficient quantity for it to be driven to the rear against the force of inertia of the bolt carrier and the forward pressure exerted against the bolt by the recoil spring. As the rollers are forced inward they displace the locking piece and propel the bolt carrier to the rear. The bolt carrier's rearward velocity is four times that of the bolt head since the cartridge remains in the chamber for a short period of time during the initial recoil impulse. After the bolt carrier has travelled rearward 4 mm, the locking piece is withdrawn fully from the bolt head and the rollers are compressed into the bolt head. Only once the locking rollers are fully cammed into the bolt head can the entire bolt group continue its rearward movement in the receiver, breaking the seal in the chamber and continuing the feeding cycle. [26]
Since the 9×19mm Parabellum cartridge is relatively low powered, the bolt does not have an anti-bounce device like the G3, but instead the bolt carrier contains 32.5 g (1.15 oz) of tungsten granules that prevent the bolt group from bouncing back after impacting the barrel extension. The weapon has a fluted chamber that enhances extraction reliability by bleeding gases backwards into the shallow flutes running along the length of the chamber to prevent the cartridge case from expanding and sticking to the chamber walls (since the bolt is opened under relatively high barrel pressure). A spring extractor is installed inside the bolt head and holds the case securely until it strikes the ejector arm and is thrown out of the ejection port to the right of the receiver. The lever-type ejector is located inside the trigger housing (activated by the movement of the recoiling bolt). [26]
Threading is provided at the muzzle to work with certain muzzle devices made by Heckler & Koch, including a slotted flash suppressor, a blank-firing adapter (marked with a red-painted band denoting use with blank ammunition only), a rifle grenade adapter (for use with rifle-style grenades with an inside diameter of 22 mm using a special grenade launching cartridge), and cup-type tear gas rifle grenade adapter. An optional "3-Lug" barrel is also available on some variants for mounting a quick-detachable suppressor.
The MP5SD's 146 mm (5.7 in) barrel has 30 2.5 mm (0.1 in) ports drilled forward of the chamber through which escaping gases are diverted to the surrounding sealed tubular casing that is screwed onto threading on the barrel's external surface just prior to the ported segment. The MP5SD's integral suppressor itself is divided into two stages: the initial segment surrounding the ported barrel serves as an expansion chamber for the propellant gases, reducing gas pressure to slow down the acceleration of the projectile. The second decompression stage occupies the remaining length of the suppressor tube and contains a stamped metal helix separator with several compartments which increase the gas volume and decrease its temperature, deflecting the gases as they exit the muzzle, so muffling the exit report. The bullet leaves the muzzle at subsonic velocity, so it does not generate a sonic shock wave in flight. As a result of reducing the barrel's length and venting propellant gases into the suppressor, the bullet's muzzle velocity was lowered anywhere from 16% to 26% (depending on the ammunition used) while maintaining the weapon's automation and reliability. [24]
The receiver housing has a proprietary claw-rail mounting system that permits the attachment of a standard Heckler & Koch quick-detachable scope mount (also used with the G3, HK33, and G3SG/1). It can be used to mount daytime optical sights (telescopic 4×24), night sights, reflex sights, and laser sights. The mount features two spring-actuated bolts, positioned along the base of the mount, which exert pressure on the receiver to hold the mount in the same position at all times assuring zero retention. All versions of the quick-detachable scope mount provide a sighting tunnel through the mount so that the shooter can continue to use the fixed iron sights with the scope mount attached to the top of the receiver.
A Picatinny rail adapter can be placed on top that locks into the claw rails. This allows the mounting of STANAG scopes and has a lower profile than the claw-rail system.
Standard MP5 variants have the option of two handguard variants: "Slimline", the original slim checkered metal handguard; and "Tropical", a wider and smoother polymer handguard introduced in 1978.
The MP5SD, MP5K, and SP89 have unique handguards owing to their design differences: the MP5SD handguard is similar to Slimline but larger to fit the integrated suppressor, the MP5K handguard has a built-in foregrip and handstop, and the SP89 handguard is similar to the MP5K's but extended and without the foregrip.
Aftermarket handguards also exist, including newer vented handguards based on the "Tropical" handguard, "dedicated forend" handguards featuring a built-in underbarrel tactical light, and rail integration system-equipped handguards to fit attachments. [27]
The MP5SD ("SD" meaning Schalldämpfer, German for "sound suppressor") is a variant of the MP5 with an integral suppressor, introduced in 1974. [33] The integral suppressor, built around its 5.7-inch barrel, uses a unique two-stage design that allows it to operate silently in most environments, including when wet, while still remaining reliable. [34] The distinctive size of the integral suppressor gives it a unique handguard design, with a modified charging handle to account for it. The MP5SD has a rate of fire of approximately 700 rounds per minute, [35] and is intended to use subsonic ammunition with the suppressor on at all times, though it can be detached. [24]
The MP5K ("K" meaning Kurz, German for "short") is a redesigned compact variant of the MP5, introduced in 1976. Developed from the stockless MP5A1, [29] it features a 4.5-inch barrel incompatible with muzzle attachments, an endcap with sling mount instead of a stock, and a unique handguard with a built-in foregrip. Most components of the MP5K are shortened on account of its compact design, including its bolt, receiver, charging handle, cover, and trigger group frame; the lighter bolt gives it a higher rate of fire, at approximately 900 rounds per minute (as opposed to 800 rounds per minute with the regular MP5). Different variants of the MP5K use either unique open iron sights or redesigned fixed iron sights. [25]
Though the MP5 is normally chambered in 9×19mm Parabellum, two variants and an unreleased kit existed that used different ammunition. [38]
Five prototype firearms based on the MP5 were developed by Heckler & Koch in the 1980s and 1990s, mostly intended as improved variants or potential successors, but were not developed any further.
A machine pistol is an autoloading pistol capable of fully automatic fire, including stockless handgun-style submachine guns.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel "Uzi" Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.
The Heckler & Koch MP7 is a personal defense weapon chambered for the HK 4.6×30mm armor-piercing cartridge designed by German defence manufacturer Heckler & Koch.
The Heckler & Koch G3 is a select-fire battle rifle chambered in 7.62×51mm NATO developed in the 1950s by the German firearms manufacturer Heckler & Koch, in collaboration with the Spanish state-owned firearms manufacturer CETME. The G3 was the service rifle of the German Bundeswehr until it was replaced by the Heckler & Koch G36 in the 1990s, and was adopted into service with numerous other countries.
The Heckler & KochG36(Gewehr 36) is an assault rifle designed in the early 1990s by German weapons manufacturer Heckler & Koch. It is chambered in 5.56×45mm NATO, and replaced the heavier G3 battle rifle chambered in 7.62×51mm. The G36 was accepted into service with the Bundeswehr in 1997. Since then, it has been a popular export, and has seen active service in military and police units in several countries, including Germany, Spain, and the United Kingdom. The G36 is gas-operated and feeds from a 30-round detachable box magazine or 100-round C-Mag drum magazine.
The Heckler & Koch UMP is a submachine gun developed and manufactured by Heckler & Koch. Heckler & Koch developed the UMP as a lighter and cheaper successor to the MP5, though both remain in production. The UMP has been adopted for use by various countries including Brazil, Canada, and the United States. A small number of UMPs chambered in .45 ACP were officially purchased by the 5th Special Forces Group of the United States Army Special Forces, with some of the weapons seeing limited service in the early years of the Iraqi insurgency, making them one of the more popular submachine guns being deployed by the U.S. military personnel in recent conflicts around the world.
The Colt Automatic Rifle-15 or CAR-15 is a family of M16 rifle–based firearms marketed by Colt in the 1960s and early 1970s. However, the term "CAR-15" is most commonly associated with the Colt Commando ; these select-fire carbines have ultrashort 10.5-inch (270 mm) and 11.5-inch (290 mm) barrels with over-sized flash suppressors.
The Beretta M12 is a 9×19mm Parabellum caliber submachine gun designed by Beretta. Production started in 1959, the first users were the Italian Carabinieri, Italian State Police and the Guardia di Finanza, though in limited numbers; it was only widely issued beginning in 1978, replacing the old Beretta MAB. In 1962 the Italian Army bought a limited number of Franchi LF-57 submachine guns, judged better than the M12 but never issued to the troops, and only in 1992 the M12S2 variant was introduced, in very limited numbers. The Italian Air Force bought instead many M12S and M12S2 for the airport security units. However, the weapon had a higher initial success in the Arab countries and South America.
The FAMAE SAF is a submachine gun produced and manufactured by FAMAE since 1993.
The Lusa is a compact 9×19mm Parabellum submachine gun developed by INDEP of Portugal in 1983. Its name is derived from Lusitania, which was the Roman name for the Iberian region that covers present day central and southern Portugal and part of Spain. Although it was originally intended for military use, it was well-suited for law enforcement and ended up being marketed to bodyguards, VIP protection and special operations units.
The Heckler & Koch HK33 is a 5.56mm assault rifle developed in the 1960s by West German armament manufacturer Heckler & Koch GmbH (H&K), primarily for export.
The Agram 2000 is a Croatian submachine gun inspired by Beretta's model M12. The name "Agram" is the old German name for Zagreb, the capital of Croatia. The vast numbers of ex-special forces Agrams in Croatia after the Croatian War of Independence, as well as the availability of a sound suppressor, has made it a popular choice for criminals. It was never officially adopted by the Croatian Army. Infamously unreliable in the war period due to its poorly constructed magazines, it would often fail to feed rounds from the magazine, decreasing its commercial demand outside of Croatia and transnational criminal organizations of the time.
The HK21 is a German 7.62 mm general-purpose machine gun, developed in 1961 by small arms manufacturer Heckler & Koch and based on the G3 battle rifle. The weapon is in use with the armed forces of several Asian, African and Latin American countries. It was also license-manufactured by Fábrica de Braço de Prata in Portugal as the m/968 and in Mexico by SEDENA as the MG21. In the German military (Bundeswehr) and the federal police (Bundespolizei) it is designated "G8".
The Colt 9mm SMG, also known as the Colt Model 635 or Colt M635, is a 9×19mm Parabellum submachine gun manufactured by Colt, based on the M16 rifle.
The CETME C2 is a Spanish submachine gun based on the British Sterling L2A3. It is an open-bolt, blowback-operated firearm that fires the 9×23mm Largo and 9×19mm Parabellum pistol cartridge. Designed in the 1960s, the C2 has many notable safety features built into it and was later used to replace the Star Model Z-45 submachine gun series for Spain in the 1960s however, was later superseded by the MP5 and Star Z-84.
The GSG-5 is a semi-automatic rimfire rifle chambered for the .22 Long Rifle cartridge. It is built by German Sport Guns GmbH, an airsoft wholesaler located in Ense-Höingen, Germany. It was unveiled at the IWA & Outdoor Classics trade show in March 2007 following the legalization of previously forbidden military-style weapons in Germany.
The M3 is an American .45-caliber submachine gun adopted by the U.S. Army on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to mass produce and lighter, at the expense of accuracy. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.
The PP-19 Vityaz is a 9×19mm Parabellum submachine gun developed in 2004 by Russian small arms manufacturer Izhmash. It is based on the AK-74 and offers a high degree of parts commonality with the AK-74. The gun is directly developed from the PP-19 Bizon. "Vityaz" (витязь) is Russian for "brave warrior" or "knight".
The B&T APC is a submachine gun produced and manufactured by B&T of Switzerland. Announced in 2011, the standard series uses standard 9×19mm (APC9), .40 S&W (APC40), 10mm Auto (APC10), and .45 ACP (APC45) ammunition.
{{cite web}}
: CS1 maint: numeric names: authors list (link)