Bosun's chair

Last updated
Bosun's chair used by a crew member of the ORP Iskra Czyszczenie girlandow.JPG
Bosun's chair used by a crew member of the ORP Iskra
A bosun's chair, in use by a bosun, re-tarring a section of a backstay on the Prince William after making a minor repair. Bosun's chair.jpg
A bosun's chair, in use by a bosun, re-tarring a section of a backstay on the Prince William after making a minor repair.
A window cleaner's bosun's chair connected to a descent-only rope system Miami High Rise window cleaning bosun's chair.JPG
A window cleaner's bosun's chair connected to a descent-only rope system

A bosun's chair (or boatswain's chair) is a device used to suspend a person from a rope to perform work aloft. [1] Originally just a short plank or swath of heavy canvas, many modern bosun's chairs incorporate safety devices similar to those found in rock climbing harnesses such as safety clips and additional lines.

Contents

In addition to the maritime applications they were developed for, bosun's chairs are also used for working at height in various maintenance industries. In commercial window cleaning, the term bosun's chair describes devices suspended from rope and equipped with seatboards, such as descent-only controlled descent apparatuses (CDAs). [2]

Competition

Bosun's Chair has become a competition event in Sea Scout Regattas in the United States such as the Old Salt's Regatta and the Ancient Mariner's Regatta. The event is based on a practice from old navy ships where high-ranking officers would be lifted onto the ships instead of climbing aboard. The bosun's chair would be attached to a block on the davit with a line. The officer would have the chair put under him, or the French bowline tied around him, and then sideboys would lift him onto the deck of the ship on the command of the bosun's whistle. [3]

The event requires a line running through a block connected to a tower, simulating a ship's mast. Two participants approach the line and prepare it for the event. When ready, the participants stand at attention. On the signal from the judges time starts. One person ties into one side of the line using a French bowline. The person places one loop around their waist and the other under their legs. The other person gets ready to pull the first person up to the block. When the person who is tied in reaches the top and touches the block they yell touch. Time then stops and they are slowly lowered to the ground. As soon as the person touches the ground or the two participants touch each other time begins. The first person unties and the second person ties in. The second person is raised to the top, time stops, and they are lowered. Time again starts when the person touches the ground or their partner, and is stopped finally when the knot is untied, and the participants stand at attention again. A competitive time is under one minute for the entire operation.[ citation needed ]

Safety

The competition judges are in charge of safety. If the French bowline is tied wrong or does not have the six inches of tail required, safety will be called and with time running, the competitors will have to fix this. Another reason to call safety is if the loops of the French bowline are not in the right places or are too loose. If the descent is not done in a controlled hand-over-hand method, the team will be disqualified.[ citation needed ]

Variations

View from the bosun's chair towards the ship deck from a height of around 15 m, the full mast height of the c. 12 m long sailing yacht. The photo was taken while a broken line running over the top of the mast was being replaced. Bird's eye view on two sailboats Beneteau Oceanis 411 from 15 m height (top of mast), photographer in a Bosun's chair doing repairs.jpg
View from the bosun's chair towards the ship deck from a height of around 15 m, the full mast height of the c. 12 m long sailing yacht. The photo was taken while a broken line running over the top of the mast was being replaced.

At the Old Salt's regatta, the bosun's chair is a six-person competition. Instead of multiple teams of two competing, the entire team lines up for the event. The first person ties in while the second person raises them. Once they touch the ground, the first person unties and is done. The second person then ties in and is lifted by the third person. This continues until the final person lifts someone and the second to last person is lifted, unties and the crew returns to attention.[ citation needed ]

See also

Related Research Articles

<span class="mw-page-title-main">Bowline</span> Simple knot used to form a fixed loop at the end of a rope

The bowline is an ancient and simple knot used to form a fixed loop at the end of a rope. It has the virtues of being both easy to tie and untie; most notably, it is easy to untie after being subjected to a load. The bowline is sometimes referred to as king of the knots because of its importance. Along with the sheet bend and the clove hitch, the bowline is often considered one of the most essential knots.

<span class="mw-page-title-main">Figure-eight knot</span> Type of stopper knot used in sailing and climbing

The figure-eight knot or figure-of-eight knot is a type of stopper knot. It is very important in both sailing and rock climbing as a method of stopping ropes from running out of retaining devices. Like the overhand knot, which will jam under strain, often requiring the rope to be cut, the figure-eight will also jam, but is usually more easily undone than the overhand knot.

The figure-eight or figure-of-eight knot is also called the Flemish knot. The name figure-of-eight knot appears in Lever's Sheet Anchor; or, a Key to Rigging. The word "of" is nowadays usually omitted. The knot is the sailor's common single-strand stopper knot and is tied in the ends of tackle falls and running rigging, unless the latter is fitted with monkey's tails. It is used about ship wherever a temporary stopper knot is required. The figure-eight is much easier to untie than the overhand, it does not have the same tendency to jam and so injure the fiber, and is larger, stronger, and equally secure.

<span class="mw-page-title-main">Climbing harness</span> Item of climbing equipment

A climbing harness is a device which allows a climber access to the safety of a rope. It is used in rock and ice climbing, abseiling, and lowering; this is in contrast to other activities requiring ropes for access or safety such as industrial rope work, construction, and rescue and recovery, which use safety harnesses instead.

<span class="mw-page-title-main">Mooring</span> Structure for securing floating vessels

A mooring is any permanent structure to which a seaborne vessel may be secured. Examples include quays, wharfs, jetties, piers, anchor buoys, and mooring buoys. A ship is secured to a mooring to forestall free movement of the ship on the water. An anchor mooring fixes a vessel's position relative to a point on the bottom of a waterway without connecting the vessel to shore. As a verb, mooring refers to the act of attaching a vessel to a mooring.

<span class="mw-page-title-main">Glossary of climbing terms</span> For rock climbing and mountaineering

Glossary of climbing terms relates to rock climbing, mountaineering, and to ice climbing.

<span class="mw-page-title-main">Abseiling</span> Rope-controlled descent

Abseiling, also known as rappelling, is the controlled descent of a steep slope, such as a rock face, by moving down a rope. When abseiling, the person descending controls their own movement down the rope, in contrast to lowering off, in which the rope attached to the person descending is paid out by their belayer.

<span class="mw-page-title-main">Bondage positions and methods</span> Techniques for consensually restraining people for sexual pleasure

Bondage in BDSM is the activity of tying or restraining people using equipment such as chains, cuffs, or collars for mutual erotic pleasure. According to the Kinsey Institute, 12% of females and 22% of males respond erotically to BDSM.

<span class="mw-page-title-main">Belaying</span> Rock climbing safety technique using ropes

Belaying is a variety of techniques climbers use to create friction within a climbing system, particularly on a climbing rope, so that a falling climber does not fall very far. A climbing partner typically applies tension at the other end of the rope whenever the climber is not moving, and removes the tension from the rope whenever the climber needs more rope to continue climbing.

This glossary of nautical terms is an alphabetical listing of terms and expressions connected with ships, shipping, seamanship and navigation on water. Some remain current, while many date from the 17th to 19th centuries. The word nautical derives from the Latin nauticus, from Greek nautikos, from nautēs: "sailor", from naus: "ship".

<span class="mw-page-title-main">Boatswain's call</span> Whistle used for communication onboard naval ships

A boatswain's call, pipe, or bosun's whistle is a pipe or a non-diaphragm type whistle used on naval ships by a boatswain.

<span class="mw-page-title-main">Offset overhand bend</span> Knot used to join two ropes together

The offset overhand bend is a knot used to join two ropes together end-to-end. It is formed by holding two rope ends next to each other and tying an overhand knot in them as if they were a single line. Due to its common use in several fields, this bend has become known by many names, such as thumb knot, openhand knot, one-sided overhand knot or flat overhand bend (FOB), though the terms "one-sided" and "flat" are considered incorrect.

<span class="mw-page-title-main">Bowline on a bight</span> Knot that makes a pair of fixed-size loops in the middle of a rope

The bowline on a bight is a knot which makes a pair of fixed-size loops in the middle of a rope. Its advantage is that it is reasonably easy to untie after being exposed to load. It is one of the two tie-in knots that are being taught by the German Alpine Club (DAV), generally being considered secure.

<span class="mw-page-title-main">Ropes course</span>

A ropes course is a challenging outdoor personal development and team building activity which usually consists of high elements, low elements, or some combination of the two. Low elements take place on the ground or above the ground. High elements are usually constructed in trees or made of utility poles and require a belay for safety.

<span class="mw-page-title-main">Prusik knot</span> Type of knot

A Prusik is a friction hitch or knot used to attach a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, ziplining, and by arborists. The term Prusik is a name for both the loops of cord used to tie the hitch and the hitch itself, and the verb is "to prusik". More casually, the term is used for any friction hitch or device that can grab a rope. Due to the pronunciation, the word is often misspelled Prussik, Prussick, or Prussic.

<span class="mw-page-title-main">Spanish bowline</span> Knot

The Spanish bowline is a double loop knot that can be used to lift a person. For a conscious person, each loop is placed around a leg and the person holds onto the standing part of the rope. This knot can serve as a makeshift Bosun's chair. For an unconscious person one loop is placed around the arm pits and the second loop is placed around the knees.

<span class="mw-page-title-main">Breeches buoy</span> Rescue device for transport along a taut rope

A breeches buoy is a rope-based rescue device used to extract people from wrecked vessels, or to transfer people from one place to another in situations of danger. The device resembles a round emergency personal flotation device with a leg harness attached. It is similar to a zip line. The breeches buoy may be deployed from shore to ship, ship to ship, or ship to shore using a Manby mortar, rocket, kite system, or a Lyle gun, and allows evacuation of one person at a time. A line is attached to the ship, and the person being rescued is pulled to shore in the breeches buoy.

<span class="mw-page-title-main">Belay device</span> Mechanical piece of climbing equipment

A belay device is a mechanical piece of climbing equipment used to control a rope during belaying. It is designed to improve belay safety for the climber by allowing the belayer to manage their duties with minimal physical effort. With the right belay device, a small, weak climber can easily arrest the fall of a much heavier partner. Belay devices act as a friction brake, so that when a climber falls with any slack in the rope, the fall is brought to a stop.

<span class="mw-page-title-main">Lyle gun</span> Line-throwing gun for rescue

A Lyle gun was a line thrower powered by a short-barrelled cannon. It was invented by Captain David A. Lyle, US Army, a graduate of West Point and the Massachusetts Institute of Technology, and was used from the late 19th century to 1952, when it was replaced by rockets for throwing lines.

<span class="mw-page-title-main">Jackstay</span> Substantial line between two points used to guide or support.

A jackstay is a cable or bar between two points to support and guide a load between those points, or as an anchor to attach something to be constrained along that line. The term is mostly used in a marine context and originated on sailing ships. Note the use of "stay" implies load bearing working rigging. In diving it is also a line to guide the movements of a diver between the endpoints.

References

  1. westmarine.com. "Do-it-Yourself: Climbing Your Sailboat's Mast with a Bosun's Chair".
  2. "History of the Bosun's Chair". Nick's Window Cleaning. Retrieved 18 November 2017.
  3. martinezgazette.com. "Sea Farers Regatta to test scouts' skills". They'll heave lines and ring buoys, hoist someone in a bosun's chair made of a knotted rope, climb other ropes, use a marlinspike to splice ropes, lift a water-filled barrel in the scuttlebutt contest, demonstrate knowledge of radio communication and pretend to rescue a stranded sailor in the breeches buoy contest, which like many is a timed event with plenty of rules.