Inetd implementation
On most Unix-like operating systems a discard server is built into the inetd (or xinetd) daemon. The discard service is usually not enabled by default. It may be enabled by adding the following lines to the file /etc/inetd.conf and reloading the configuration:
discard stream tcp nowait root internal discard dgram udp wait root internal
The Discard Protocol is the TCP/UDP equivalent of the Unix file-system node /dev/null . Such a service is guaranteed to receive what is sent to it and can be used for debugging code requiring a guaranteed reception TCP or UDP payloads.
On various routers, this TCP or UDP port 9 for the Discard Protocol (or port 7 for the Echo Protocol relaying ICMP datagrams) is also used by default as a proxy to relay Wake-on-LAN (WOL) magic packets from the Internet to hosts on the local network in order to wake them up remotely (these hosts must also have their network adapter configured to accept WOL datagrams and the router must have this proxy setting enabled, and possibly also a configuration of forwarding rules in its embedded firewall to open these ports on the Internet side).
The Internet protocol suite, commonly known as TCP/IP, is a framework for organizing the set of communication protocols used in the Internet and similar computer networks according to functional criteria. The foundational protocols in the suite are the Transmission Control Protocol (TCP), the User Datagram Protocol (UDP), and the Internet Protocol (IP). Early versions of this networking model were known as the Department of Defense (DoD) model because the research and development were funded by the United States Department of Defense through DARPA.
In computing, traceroute and tracert are computer network diagnostic commands for displaying possible routes (paths) and measuring transit delays of packets across an Internet Protocol (IP) network. The history of the route is recorded as the round-trip times of the packets received from each successive host in the route (path); the sum of the mean times in each hop is a measure of the total time spent to establish the connection. Traceroute proceeds unless all sent packets are lost more than twice; then the connection is lost and the route cannot be evaluated. Ping, on the other hand, only computes the final round-trip times from the destination point.
In computer networking, the User Datagram Protocol (UDP) is one of the core communication protocols of the Internet protocol suite used to send messages to other hosts on an Internet Protocol (IP) network. Within an IP network, UDP does not require prior communication to set up communication channels or data paths.
Wake-on-LAN is an Ethernet or Token Ring computer networking standard that allows a computer to be turned on or awakened from sleep mode by a network message.
Berkeley sockets is an application programming interface (API) for Internet sockets and Unix domain sockets, used for inter-process communication (IPC). It is commonly implemented as a library of linkable modules. It originated with the 4.2BSD Unix operating system, which was released in 1983.
The Bootstrap Protocol (BOOTP) is a computer networking protocol used in Internet Protocol networks to automatically assign an IP address to network devices from a configuration server. The BOOTP was originally defined in RFC 951 published in 1985.
SOCKS is an Internet protocol that exchanges network packets between a client and server through a proxy server. SOCKS5 optionally provides authentication so only authorized users may access a server. Practically, a SOCKS server proxies TCP connections to an arbitrary IP address, and provides a means for UDP packets to be forwarded.
STUN is a standardized set of methods, including a network protocol, for traversal of network address translator (NAT) gateways in applications of real-time voice, video, messaging, and other interactive communications.
In computer networks, a tunneling protocol is a communication protocol which allows for the movement of data from one network to another. It involves allowing private network communications to be sent across a public network through a process called encapsulation.
The Echo Protocol is a service in the Internet Protocol Suite defined in RFC 862. It was originally proposed for testing and measurement of round-trip times in IP networks.
The Daytime Protocol is a service in the Internet Protocol Suite, defined in 1983 in RFC 867. It is intended for testing and measurement purposes in computer networks.
The Time Protocol is a network protocol in the Internet Protocol Suite defined in 1983 in RFC 868 by Jon Postel and K. Harrenstein. Its purpose is to provide a site-independent, machine readable date and time.
The Character Generator Protocol (CHARGEN) is a service of the Internet Protocol Suite defined in RFC 864 in 1983 by Jon Postel. It is intended for testing, debugging, and measurement purposes. The protocol is rarely used, as its design flaws allow ready misuse.
inetd is a super-server daemon on many Unix systems that provides Internet services. For each configured service, it listens for requests from connecting clients. Requests are served by spawning a process which runs the appropriate executable, but simple services such as echo are served by inetd itself. External executables, which are run on request, can be single- or multi-threaded. First appearing in 4.3BSD, it is generally located at /usr/sbin/inetd.
In computer networking, xinetd is an open-source super-server daemon which runs on many Unix-like systems, and manages Internet-based connectivity.
Network address translation traversal is a computer networking technique of establishing and maintaining Internet Protocol connections across gateways that implement network address translation (NAT).
A network socket is a software structure within a network node of a computer network that serves as an endpoint for sending and receiving data across the network. The structure and properties of a socket are defined by an application programming interface (API) for the networking architecture. Sockets are created only during the lifetime of a process of an application running in the node.
In computer networking, a port or port number is a number assigned to uniquely identify a connection endpoint and to direct data to a specific service. At the software level, within an operating system, a port is a logical construct that identifies a specific process or a type of network service. A port at the software level is identified for each transport protocol and address combination by the port number assigned to it. The most common transport protocols that use port numbers are the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP); those port numbers are 16-bit unsigned numbers.
Port Control Protocol (PCP) is a computer networking protocol that allows hosts on IPv4 or IPv6 networks to control how the incoming IPv4 or IPv6 packets are translated and forwarded by an upstream router that performs network address translation (NAT) or packet filtering. By allowing hosts to create explicit port forwarding rules, handling of the network traffic can be easily configured to make hosts placed behind NATs or firewalls reachable from the rest of the Internet, which is a requirement for many applications.
This page is based on this
Wikipedia article Text is available under the
CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.
