Smith & Wesson Governor

Last updated

Smith & Wesson Governor
Smith and Wesson Governor with accessories.jpg
Smith & Wesson Governor, with a speedloader, loaded with .45 Colt, a moon clip loaded with .45 ACP, and six Federal 2+1/2-inch "000" buckshot .410 shotgun shells, as well as hearing protection.
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Unit cost$869–1,119 MSRP
Produced2011–present [1]
Specifications
Mass29.6 oz (840 g) [1]
Length8.5 in (22 cm) [1]
Barrel  length2.75 in (7.0 cm) [1]
Width1.75 in (4.4 cm) [1]
Height5.5 in (14 cm) [1]

Cartridge .410 bore
.45 ACP
.45 Schofield
.45 Colt
[1]
Barrels2.75"/6.985 cm
Action Single or double action
Feed system6-round cylinder [1]
SightsRear notch and tritium front blade

The Smith & Wesson Governor is a snub-nosed (2.75 inch barrel) single-action/double-action revolver built on the Z-frame (a stretched N-frame[ citation needed ]) and utilizes a K-frame grip[ citation needed ] with a lightweight scandium alloy or stainless steel frame.

Contents

Design

Similar to the Taurus Judge, the Governor can fire 2+12-inch-long (64 mm) .410 shotgun shells, .45 Colt cartridges, and also .45 ACP cartridges with the use of supplied moon clips (due to the lack of a rim on the ACP cartridges). [2]

The rear sights are fixed; similar to those found on the small J-Framed .38 Special and .357 Magnum as well as the medium-sized K-frame service revolvers. The front sights on both the standard and Crimson Trace models feature a tritium night sight that is drift-adjustable for windage corrections. It holds six rounds in any combination. [3]

For a large handgun, the Governor is very lightweight—less than 30 ounces (850 g) unloaded—due to the alloys used in its construction. [3]

Models

Two versions of the alloy model are manufactured, the "iron sight" alloy Governor [1] and the alloy model with the Crimson Trace laser sight. [4]

There is a stainless steel version with open iron sights. [5]

See also

Related Research Articles

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Springfield, Massachusetts, United States.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson Model 500</span> Revolver

The Smith & Wesson Model 500 is a five-shot, double/single action large-caliber revolver produced by Smith & Wesson, firing the .500 S&W Magnum cartridge.

<span class="mw-page-title-main">Smith & Wesson Model 625</span> Revolver

The Smith & Wesson Model 625, is a six-round, double-action revolver chambered for the .45 ACP using moon clips. The Model 625 is an improved stainless steel version Smith & Wesson Model 22 and a direct descendant of the Smith & Wesson M1917 revolver first issued during World War I.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or similar space.

<span class="mw-page-title-main">Smith & Wesson Model 17</span> Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

<span class="mw-page-title-main">North American Arms</span>

North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Ruger Redhawk</span> Revolver

The Ruger Redhawk is a DA/SA, large-frame revolver that was first introduced in 1979 by Sturm, Ruger & Company. Made from high-grade steel, it is available in a stainless steel finish. The Redhawk is reinforced to handle extra stress, making it very popular for use by handloaders as it is able to handle both .45 Colt and .44 Magnum loads. In addition, the cylinder itself is longer than most competitors', allowing ammunition to be loaded to a longer overall length. This allows for either increased powder capacity, heavier bullets without compromising the powder load, or a combination of both. Custom ammunition manufacturers even have loads made specifically for Ruger revolvers that cannot fit in shorter chambers or revolvers of weaker construction. This makes the Redhawk popular as a bear defense gun among hunters and trappers.

<span class="mw-page-title-main">Smith & Wesson Model 13</span> US Revolver

The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. The two most common types of handguns are revolvers and semi-automatic pistols, although other types such as derringers and machine pistols also see infrequent usage.

The Smith & Wesson 340PD is an ultra-light J-frame five shot snubnosed revolver chambered for .357 Magnum.

<span class="mw-page-title-main">Smith & Wesson Model 22</span> Revolver

The Smith & Wesson Model 22 is a 6-shot, double-action, large frame revolver chambered in .45 ACP using moon clips. It's a refined commercial version of the M1917 revolver first issued during World War I.

<span class="mw-page-title-main">Smith & Wesson Model 610</span> Revolver

The Model 610 is a six-shot, double-action revolver chambered for the 10mm Auto cartridge.

The Smith & Wesson 645 and Smith & Wesson 745 are second-generation semi-automatic pistols which predate Smith & Wesson's 4500 series of handguns. The S&W 645/745 is chambered for the .45 ACP cartridge. The S&W 645 is constructed almost entirely from stainless steel and is thus extremely resistant to harsh weather conditions, whereas the S&W 745 has a stainless steel frame and a blued carbon steel slide. The S&W 645 was introduced in 1985 and discontinued in 1988. The S&W 745 was produced from 1986 to 1990, primarily as a single-action competition gun for IPSC shooting.

<span class="mw-page-title-main">Smith & Wesson Model 460</span> Revolver

Smith & Wesson Model 460 is a large bore five-shot, single-action/double-action revolver by Smith & Wesson chambered for the .460 S&W Magnum cartridge. It was designed as a hunting and dangerous game defensive revolver for use in Africa and Alaska. The revolver is built on the company's largest and strongest frame, known as the X-Frame, and represents a joint effort among Smith & Wesson, Hornady, and Cor-Bon.

<span class="mw-page-title-main">Taurus Judge</span> Revolver

The Taurus Judge is a five shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.

The Smith & Wesson Model 646 is a six-shot, double-action revolver chambered for the .40 S&W pistol cartridge, manufactured in 2000 and 2003 by the United States company Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson Bodyguard 380</span> Semi-automatic pistol

The Smith & Wesson Bodyguard 380 is a compact semi-automatic pistol produced by Smith & Wesson chambered for the .380 ACP cartridge.

<span class="mw-page-title-main">Smith & Wesson Bodyguard</span> Family of small, J-frame revolvers

The Smith & Wesson Bodyguard is a family of small J-frame revolvers with shrouded hammers manufactured by Smith & Wesson. They are available chambered in either .38 Special or .357 Magnum.

References

  1. 1 2 3 4 5 6 7 8 9 "Model Governor". Smith & Wesson. Retrieved 2 January 2013.
  2. Pearsall, Jennifer (2012). Gun Digest Illustrated Guide to Modern Firearms. Iola, Wisconsin: Gun Digest Books. p. 124. ISBN   1-4402-3253-9.
  3. 1 2 Peterson, Phillip (2011). The Gun Digest Book of Modern Gun Values. Iola. Wisconsin: Gun Digest Books. p. 229. ISBN   1-4402-1831-5.
  4. "Model Governor with Crimson Trace". Smith & Wesson.
  5. "Model Governor Stainless Steel". Smith & Wesson.