Aerocopter Sarus

Last updated
Sarus and Kestrel
Roleexperimental "proof-of-concept" vehicle
ManufacturerAeroCopter Inc.
DesignerSiamak Yassini and George Syrovy
First flightTBD
Statusunder development
Primary userCommercial

AeroCopter Inc. is a new venture backed by YAS Ventures LLC and two Entrepreneurs Siamak Yassini and George Syrovy and it is aimed at pioneering the third generation of airborne transportation.

Contents

Overview

AeroCopter is dedicated to the development of a revolutionary, best-in-class, scalable Counter-Rotating Mono-Tilt-Rotor (MTR) aircraft system with Vertical Take Off and Landing (VTOL) capabilities, with patented technology that is accessible and affordable to the Commercial Personal Air Vehicle (PAV) Sarus, Civil and Military Unmanned Aerial Vehicles (UAVs) Kestrel, and Very Light Jet (VLJ) markets. It differs from previous tiltrotors in that instead of each rotor consisting of long blades attached to a central rotary ring, it has a single rotary ring which has a diameter equal to the entire wingspan of the aircraft, with the ring being attached to the tips of the wings. Small blades are attached to the outside of the ring. After vertical takeoff, the ring tilts from horizontal to vertical and the craft switches to flight mode with the fuselage of the aircraft being in the center of the ring.

See also

Related Research Articles

Flying car Car that can be flown in much the same way as a car may be driven

A flying car is a type of personal air vehicle or roadable aircraft that provides door-to-door transportation by both ground and air. The term "flying car" is also sometimes used to include hovercars.

A vertical take-off and landing (VTOL) aircraft is one that can hover, take off, and land vertically. This classification can include a variety of types of aircraft including fixed-wing aircraft as well as helicopters and other aircraft with powered rotors, such as cyclogyros/cyclocopters and tiltrotors. Some VTOL aircraft can operate in other modes as well, such as CTOL, STOL, or STOVL. Others, such as some helicopters, can only operate by VTOL, due to the aircraft lacking landing gear that can handle horizontal motion. VTOL is a subset of V/STOL. Some lighter-than-air aircraft also qualify as VTOL aircraft, as they can hover, takeoff, and land with vertical approach/departure profiles.

Tiltrotor powered lift convertiplane where transition is accomplished by tilting the rotors between horizontal and vertical positions

A tiltrotor is an aircraft which generates lift and propulsion by way of one or more powered rotors mounted on rotatable engine pods or nacelles usually at the ends of a fixed wing or an engine mounted in the fuselage with drive shafts transferring power to rotor assemblies mounted on the wingtips. Almost all tiltrotors use a bicopter design with two transverse rotors, with the exception of only a few.

The CarterCopter is an experimental compound autogyro developed by Carter Aviation Technologies in the United States to demonstrate slowed rotor technology. On 17 June 2005, the CarterCopter became the first rotorcraft to achieve mu-1 (μ=1), an equal ratio of airspeed to rotor tip speed, but crashed on the next flight and has been inoperable since. It is being replaced by the Carter Personal Air Vehicle.

AgustaWestland AW609 Twin-engine tiltrotor VTOL aircraft

The AgustaWestland AW609, formerly the Bell/Agusta BA609, is a twin-engined tiltrotor VTOL aircraft with a configuration similar to that of the Bell Boeing V-22 Osprey. It is capable of landing vertically like a helicopter while having a range and speed in excess of conventional rotorcraft. The AW609 is aimed at the civil aviation market, in particular VIP customers and offshore oil and gas operators.

Sarus may refer to:

Helicopter rotor rotary wings and control system that generates the lift and thrust for a helicopter

A helicopter main rotor or rotor system is the combination of several rotary wings and a control system that generates the aerodynamic lift force that supports the weight of the helicopter, and the thrust that counteracts aerodynamic drag in forward flight. Each main rotor is mounted on a vertical mast over the top of the helicopter, as opposed to a helicopter tail rotor, which connects through a combination of drive shaft(s) and gearboxes along the tail boom. The blade pitch is typically controlled by a swashplate connected to the helicopter flight controls. Helicopters are one example of rotary-wing aircraft (rotorcraft). The name is derived from the Greek words helix, helik-, meaning spiral; and pteron meaning wing.

Quadcopter rotorcraft drone using four rotors

A quadcopter or quadrotor is a type of helicopter with four rotors.

Bell XV-3 Experimental tiltrotor aircraft to explore convertiplane technologies

The Bell XV-3 is an American tiltrotor aircraft developed by Bell Helicopter for a joint research program between the United States Air Force and the United States Army in order to explore convertiplane technologies. The XV-3 featured an engine mounted in the fuselage with driveshafts transferring power to two-bladed rotor assemblies mounted on the wingtips. The wingtip rotor assemblies were mounted to tilt 90 degrees from vertical to horizontal, designed to allow the XV-3 to take off and land like a helicopter but fly at faster airspeeds, similar to a conventional fixed-wing aircraft.

A convertiplane is defined by the Fédération Aéronautique Internationale as an aircraft which uses rotor power for vertical takeoff and landing (VTOL) and converts to fixed-wing lift in normal flight. In the US it is further classified as a sub-type of powered lift. In popular usage it sometimes includes any aircraft that converts in flight to change its method of obtaining lift.

A personal air vehicle (PAV), also personal aerial vehicle, is an emerging type of aircraft proposed to provide on-demand aviation services.

Helicopter Type of rotor craft in which lift and thrust are supplied by rotors

A helicopter, sometimes referred to in slang as a "chopper" or "helo", is a type of rotorcraft in which lift and thrust are supplied by horizontally-spinning rotors. This allows the helicopter to take off and land vertically, to hover, and to fly forward, backward, and laterally. These attributes allow helicopters to be used in congested or isolated areas where fixed-wing aircraft and many forms of VTOL aircraft cannot perform.

Bell Boeing Quad TiltRotor Proposed four-rotor derivative of the V-22 Osprey

The Bell Boeing Quad TiltRotor (QTR) is a proposed four-rotor derivative of the Bell Boeing V-22 Osprey developed jointly by Bell Helicopter and Boeing. The concept is a contender in the U.S. Army's Joint Heavy Lift program. It would have a cargo capacity roughly equivalent to the C-130 Hercules, cruise at 250 knots, and land at unimproved sites vertically like a helicopter.

Powered lift aircraft capable of powered vertical takeoff and landing but which operates as a fixed-wing aircraft during horizontal flight

A powered lift aircraft takes offs and lands vertically under engine power but uses a fixed wing for horizontal flight. These aircraft do not need a long runway to take off and land, like helicopters, but they have a speed and performance similar to standard fixed-wing aircraft in combat or other situations.

Proprotor

A proprotor is a spinning airfoil that function as both an airplane-style propeller and a helicopter-style rotor. Several proprotor-equipped convertiplanes, such as the Bell Boeing V-22 Osprey tiltrotor, are capable of switching back and forth between flying akin to both helicopters and fixed-wing aircraft. Accordingly this type of airfoil has been predominantly applied to vertical takeoff and landing (VTOL) aircraft.

Carter PAV

The Carter PAV is a two-bladed, compound autogyro developed by Carter Aviation Technologies to demonstrate slowed rotor technology. The design has an unpowered rotor mounted on top of the fuselage, wings like a conventional fixed-wing aircraft mounted underneath, and a controllable pitch pusher propeller at the rear of the fuselage. Heavy weights are placed in the rotor tips to enhance rotational energy and to reduce flapping.

Baldwin Mono Tiltrotor

The Baldwin Mono Tiltrotor project is a research effort into a tiltrotor aircraft that uses only one rotor. Like other tiltrotor configurations, the mono tiltrotor combines the vertical lift capability and structural efficiency of a helicopter with the speed and range of a fixed-wing aircraft.

Carter Aviation Technologies is a privately held aviation research and development company based in Wichita Falls, Texas, United States.

References