Traditionally, the flat surface that the animation rests on is some kind of table that the animator sits at. Pegs made specifically for animation are embedded into the table, in at least two slots allowing the pegs to slide from side to side, permitting horizontal movement of images, but can also be easily fixed into position for the accurate positioning ("registration") of the artwork.
Opposite the animator is a series of supporting arms and supports, on top of which is mounted a film or video camera, pointing down toward the artwork, which films the artwork, frame-by-frame, as it is slowly moved and changed by the operator.
The vertical positioning of the animation camera, always shooting down, is the main component that defines an animation stand, as opposed to a stop motion set-up, or other equipment arrangements for animation production.
Animation stands can be homemade, from metal or wood, such as that owned by Los Angeles animator Mike Jittlov, and still accomplish impressive animation production; or they can be elaborate (and expensive) professionally made precision systems that allow for the computerised movements of both the art and the camera, as has been traditionally used by professional animation studios and special effects facilities such as the Walt Disney studio (famous for their Multiplane camera) and George Lucas's Industrial Light & Magic (ILM) facilities.
Animation is a method in which figures are manipulated to appear as moving images. In traditional animation, images are drawn or painted by hand on transparent celluloid sheets to be photographed and exhibited on film. Today, most animations are made with computer-generated imagery (CGI). Computer animation can be very detailed 3D animation, while 2D computer animation can be used for stylistic reasons, low bandwidth, or faster real-time renderings. Other common animation methods apply a stop motion technique to two and three-dimensional objects like paper cutouts, puppets, or clay figures.
Computer animation is the process used for digitally generating animated images. The more general term computer-generated imagery (CGI) encompasses both static scenes and dynamic images, while computer animation only refers to moving images. Modern computer animation usually uses 3D computer graphics to generate a three-dimensional picture, although 2D computer graphics are still used for stylistic, low bandwidth, and faster real-time renderings. Sometimes, the target of the animation is the computer itself, but sometimes film as well.
A drawing board is, in its antique form, a kind of multipurpose desk which can be used for any kind of drawing, writing or impromptu sketching on a large sheet of paper or for reading a large format book or other oversized document or for drafting precise technical illustrations. The drawing table used to be a frequent companion to a pedestal desk in a study or private library, during the pre-industrial and early industrial era.
The Walt Disney Studios, located in Burbank, California, United States, serves as the corporate headquarters for The Walt Disney Company media conglomerate. The 51-acre studio lot also contains several sound stages, a backlot, and other filmmaking production facilities for Walt Disney Studios's motion picture production. The complex also houses the offices for the company's many divisions, with the exception of the 20th Century Studios, which remains on its namesake lot in Century City.
An animator is an artist who creates multiple images, known as frames, which give an illusion of movement called animation when displayed in rapid sequence. Animators can work in a variety of fields including film, television, and video games. Animation is closely related to filmmaking and like filmmaking is extremely labor-intensive, which means that most significant works require the collaboration of several animators. The methods of creating the images or frames for an animation piece depend on the animators' artistic styles and their field.
Visual effects is the process by which imagery is created or manipulated outside the context of a live action shot in filmmaking and video production. The integration of live action footage and other live action footage or CG elements to create realistic imagery is called VFX.
In the United States, Canada and the United Kingdom, grips are technicians in the filmmaking and video production industries. They constitute their own department on a film set and are directed by a key grip. Grips have two main functions. The first is to work closely with the camera department to provide camera support, especially if the camera is mounted to a dolly, crane, or in an unusual position, such as the top of a ladder. Some grips may specialize in operating camera dollies or camera cranes. The second main function of grips is to work closely with the electrical department to create lighting set-ups necessary for a shot under the direction of the director of photography.
Grips' responsibility is to build and maintain all the equipment that supports cameras. This equipment, which includes tripods, dollies, tracks, jibs, cranes, and static rigs, is constructed of delicate yet heavy duty parts requiring a high level of experience to operate and move. Every scene in a feature film is shot using one or more cameras, each mounted on highly complex, extremely expensive, heavy duty equipment. Grips assemble this equipment according to meticulous specifications and push, pull, mount or hang it from a variety of settings. The equipment can be as basic as a tripod standing on a studio floor, to hazardous operations such as mounting a camera on a 100 ft crane, or hanging it from a helicopter swooping above a mountain range.
Good Grips perform a crucial role in ensuring that the artifice of film is maintained, and that camera moves are as seamless as possible. Grips are usually requested by the DoP or the camera operator. Although the work is physically demanding and the hours are long, the work can be very rewarding. Many Grips work on both commercials and features.
A rostrum camera is a specially designed camera used in television production and filmmaking to animate a still picture or object. It consists of a moving lower platform on which the article to be filmed is placed, while the camera is placed above on a column. Many visual effects can be created from this simple setup, although it is most often used to add interest to static objects. The camera can, for example, traverse across a painting, and using wipes and zooms, change a still picture into a sequence suitable for television or movie productions.
Clay animation or claymation, sometimes plasticine animation, is one of many forms of stop-motion animation. Each animated piece, either character or background, is "deformable"—made of a malleable substance, usually plasticine clay.
Traditional animation is an animation technique in which each frame is drawn by hand. The technique was the dominant form of animation in cinema until the advent of computer animation.
Go motion is a variation of stop motion animation which incorporates motion blur into each frame involving motion. It was co-developed by Industrial Light & Magic and Phil Tippett. Stop motion animation can create a disorienting, and distinctive staccato effect, because the animated object is perfectly sharp in every frame, since each frame of the animation was actually shot when the object was perfectly still. Real moving objects in similar scenes of the same movie will have motion blur, because they moved while the shutter of the camera was open. Filmmakers use a variety of techniques to simulate motion blur, such as moving the model slightly during the exposure of each film frame or using a glass plate smeared with petroleum jelly in front of the camera lens to blur the moving areas.
The multiplane camera is a motion-picture camera that was used in the traditional animation process that moves a number of pieces of artwork past the camera at various speeds and at various distances from one another. This creates a sense of parallax or depth.
The Computer Animation Production System (CAPS) was a digital ink and paint system used in animated feature films, the first at a major studio, designed to replace the expensive process of transferring animated drawings to cels using India ink or xerographic technology, and painting the reverse sides of the cels with gouache paint. Using CAPS, enclosed areas and lines could be easily colored in the digital computer environment using an unlimited palette. Transparent shading, blended colors, and other sophisticated techniques could be extensively used that were not previously available.
An animation camera, a type of rostrum camera, is a movie camera specially adapted for frame-by-frame shooting of animation. It consists of a camera body with lens and film magazines, and is most often placed on a stand that allows the camera to be raised and lowered above a table often having both top and underneath lighting. The artwork to be photographed is placed on this table.
Clay painting animation is a form of clay animation, which is one of the many kinds of stop motion animation. It blurs the distinction between clay animation, cel animation and cutout animation.
Moho is a proprietary vector-based 2D animation application distributed by Lost Marble LLC. It is sold in two different packages: Moho Pro – described as 'The all-in-one animation tool for professionals and digital artists. A powerful 2D animation software that combines the most powerful animation technology with state-of-the-art professional animation tools' - is a fully fledged professional & prosumer 2D/3D animation platform; and Moho Debut – described as 'The fun, quick and affordable way to create your own cartoons and animations in minutes' - is like the pro version but restricted in terms of export length and image size, as well as not containing some of the advanced features of Moho Pro. Moho is available for Windows and macOS in English, Spanish, French, Russian, German, Chinese (Simplified), Chinese (Traditional) and Japanese..
Toon Boom Animation Inc. is a Canadian software company that specializes in animation production and storyboarding software. Founded in 1994 and based in Montreal, Quebec, Toon Boom develops animation and storyboarding software for film, television, web animation, games, mobile devices, training applications, and education. It was acquired by Corus Entertainment in 2012.
The history of computer animation began as early as the 1940s and 1950s, when people began to experiment with computer graphics – most notably by John Whitney. It was only by the early 1960s when digital computers had become widely established, that new avenues for innovative computer graphics blossomed. Initially, uses were mainly for scientific, engineering and other research purposes, but artistic experimentation began to make its appearance by the mid-1960s- most notably by Dr Thomas Calvert. By the mid-1970s, many such efforts were beginning to enter into public media. Much computer graphics at this time involved 2-dimensional imagery, though increasingly as computer power improved, efforts to achieve 3-dimensional realism became the emphasis. By the late 1980s, photo-realistic 3D was beginning to appear in film movies, and by mid-1990s had developed to the point where 3D animation could be used for entire feature film production.
A Computer Animated Hand is the title of a 1972 American computer-animated short film produced by Edwin Catmull and Fred Parke. Produced during Catmull's tenure at the University of Utah, the short was created for a graduate course project. After creating a model of his left hand, 350 triangles and polygons were drawn in ink on its surface. The model was digitized from the data and laboriously animated in a three-dimensional animation program that Catmull wrote.
Multi-image is the now largely obsolete practice and business of using 35mm slides (diapositives) projected by single or multiple slide projectors onto one or more screens in synchronization with an audio voice-over or music track. Multi-image productions are also known as multi-image slide presentations, slide shows and diaporamas and are a specific form of multimedia or audio-visual production.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
