Development | |
---|---|
Designer | Ted Gozzard |
Location | Canada |
Year | 1973 |
No. built | more than 300 [1] |
Builder(s) | Bayfield Boat Yard |
Name | Bayfield 30/32 |
Boat | |
Boat weight | 9,600 lb (4,354 kg) |
Draft | 3.75 ft (1.14 m) |
Air draft | 45 ft (14 m) [2] |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 32.00 ft (9.75 m) |
LOH | 30.00 ft (9.14 m) [1] |
LWL | 23.25 ft (7.09 m) |
Beam | 10.50 ft (3.20 m) |
Engine type | Yanmar 21 hp (16 kW) diesel engine |
Hull appendages | |
Keel/board type | long keel |
Ballast | internal lead, 4,000 lb (1,814 kg) |
Rudder(s) | keel-mounted rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 35.00 ft (10.67 m) |
J foretriangle base | 14.00 ft (4.27 m) |
P mainsail luff | 30.00 ft (9.14 m) |
E mainsail foot | 12.50 ft (3.81 m) |
Sails | |
Sailplan | Cutter rigged sloop |
Mainsail area | 187.50 sq ft (17.419 m2) |
Jib/genoa area | 245.00 sq ft (22.761 m2) |
Total sail area | 432.50 sq ft (40.181 m2) |
Racing | |
PHRF | 228 (average) |
The Bayfield 30/32 is a Canadian sailboat, that was designed by Ted Gozzard as a cruising boat and first built in 1973. [3] [4] [5]
First marketed as the Bayfield 30, the name was eventually change to the Bayfield 32 due to pressure from United States dealers who insisted on calling the boat a "32" based on its LOA, which included the clipper bow and bowsprit. The combination of traditional design, modern construction, and roomy interiors for this size of the boat was popular from the start. More than 300 Bayfield 30/32s were built during their long production run. [1]
The design was built by Bayfield Boat Yard, first in Bayfield, Ontario, and later in Clinton, Ontario, Canada, but it is now out of production. [3] [6]
The Bayfield 30/32 is a recreational keelboat, built predominantly of fiberglass, with wood trim. Most were built with a cutter rig, though a few ketches were produced, with a sail area of 525 sq ft (48.8 m2). A small number of special, tall-rig sloops were built, with 4 ft (1.2 m) of additional mast height, and an extended bowsprit increasing the total sail area to 662 sq ft (61.5 m2). [2] This version was sold as the Bayfield 32C. [1]
The 30/32 featured a clipper bow, a bowsprit, wooden decorative trailboards on the bow, a keel-mounted rudder controlled by a wheel and a fixed long keel. The hulls were solid fiberglass in a fairly heavy lay up with mat and woven roving. The deck was cored with 3/8th-inch balsa, while some high-load areas were cored with plywood. [1] The 30/32 displaces 9,600 lb (4,354 kg) and carries 4,000 lb (1,814 kg) of internally mounted lead ballast. [1] [3] [5]
The boat has a draft of 3.75 ft (1.14 m) with the standard keel and most boats were fitted with a Japanese Yanmar diesel engine of two cylinders and 15 hp (11 kW) or, less commonly three cylinders and 21 hp (16 kW), [1] [3] though a few early Bayfield 30/32s were fitted with a unique Sperry Vickers hydraulic drive [1] and a few with Mercedes-Benz diesels. [2]
The mainsheet traveller is mounted at the aft of the cockpit. The staysail has tracks mounted inboard and the genoa has outboard tracks on the bulwarks. The cockpit has dual two-speed winches and dual single speed winches. The three halyard winches are mounted on the aft coach house roof.
The design has a PHRF racing average handicap of 228 with a high of 222 and low of 237. It has a hull speed of 6.46 kn (11.96 km/h). [7]
The accommodations include a forward cabin with a door and "V"-berth. The door can close the cabin or the starboard-mounted head. The main cabin has three berths, a pull-out double berth and a quarter berth. The chart table stows in the cabin ceiling. The galley is located on the starboard side and has a stainless steel sink with a pressurized water supply, a two burner stove with oven, and a 4.0 ft (1.2 m) ice box that has a teak ice grate. Originally the cabin was fitted with dorade vents and an opening hatch, along with five fixed ports, [5] and one opening port in the heads, though later boats had the number of port lights increased to eight. [2]
In a review Michael McGoldrick wrote, "The Bayfield line of sailboats are dedicated cruising boats and aren't known for their outstanding performance. However, the Bayfield 32 equipped with a tall rig is supposed to be quite fast, although it will not point as high as a club racer with a fin keel. This boat has a shallow draft, a wide beam, and plenty of living space down below. The Bayfield 32 is a good looking boat with a distinctive appearance which sets it apart from the many look-alike boats that were manufactured in Canada in large numbers in the 1970s and 1980s." [8]
A 2010 review in Sailing magazine concluded, "the Bayfield 32 is another example of why there's no excuse not to get out on the water. This sturdy, handsome, quality cruiser is an ideal family boat that will provide drama-free sailing for years to come." [1]
Related development
Similar sailboats
The Bayfield 25 is a Canadian pocket cruiser sailboat, that was designed by Ted Gozzard and first built in 1975.
The Alberg 29 is a Canadian sailboat that was designed by Carl Alberg as racer-cruiser and first built in 1976.
The Island Packet 29 is an American sailboat that was designed by Robert K. Johnson as a cruiser and first built in 1981.
The Contest 32 CS is a Dutch sailboat that was designed by Dick Zaal as an International Offshore Rule racer to Lloyd's rules and first built in 1978.
The Pilot 35 is an American sailboat that was designed by Sparkman & Stephens as a racer-cruiser and first built in 1962.
The Hinterhoeller F3 is a Canadian sailboat that was designed by Argentine naval architect Germán Frers as a racer-cruiser and first built in 1981.
The Shannon 38 is an American sailboat that was designed by Walter Shultz, plus George Stadel III and George H. Stadel Jr. of G, H. Stadel & Son as a cruiser and first built in 1975.
The Corbin 39 is a Canadian sailboat that was designed by Robert Dufour and Marius Corbin as a global circumnavigation cruiser and first built in 1979.
The Bristol 40 is an American sailboat that was designed by Ted Hood as a racer-cruiser and first built in 1970.
The Dickerson 41 is an American sailboat that was designed by Ernest Tucker as a cruiser and first built in 1973.
The Lord Nelson 41 is an American sailboat that was designed by Loren Hart as a cruiser and first built in 1982.
The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.
The Bayfield 40 is a Canadian sailboat that was designed by Ted Gozzard for cruising and first built in 1982.
The Bayfield 36 is a Canadian sailboat that was designed by Haydn Gozzard for cruising and first built in 1984.
Bayfield Boat Yard Limited was a Canadian boat builder originally based in Bayfield, Ontario, and later in nearby Clinton, Ontario. The company specialized in the design and manufacture of fibreglass sailboats. The company was founded by Ted Gozzard in 1970 and continued in business until a plant fire forced its closure in 1988.
The Bayfield 29 is a Canadian sailboat that was designed by Ted Gozzard as a cruiser and first built in 1978.
The Aquarius 24 Pilot Cutter, also called the Aquarius Pilot Cutter 24, Aquarius 24 Cutter and the Topsail Pilot Cutter, is an American trailerable sailboat that was designed by Frank Parish as a cruiser and first built in 1979. The design was based upon a Lyle C. Hess sailboat.
The Eastsail 25 is an American trailerable sailboat that was designed by Eliot Spalding as an off-shore cruiser and first built in 1984.
The Matilda 20 is a trailerable sailboat that was designed by Robert Tucker as a daysailer and a cruiser and first built in 1971.
The Mustang 22 is an American trailerable sailboat that was designed by Martin Bludworth as a Midget Ocean Racing Club racer and first built in 1969.