P 200 | |
---|---|
Role | Long-range transport |
National origin | Germany |
Manufacturer | Blohm & Voss |
Designer | Hans Amtmann |
Status | Design proposal |
Developed from | BV 222 Wiking |
The Blohm & Voss P 200 was a design project for a transatlantic transport flying boat during World War II. It was intended to go into production for Deutsche Lufthansa after the war.
During the early stages of World War II, when it was going well for Germany, the airline Deutsche Lufthansa raised a requirement for a postwar transatlantic flying boat with a capacity of 100 passengers. Blohm & Voss gave the design work to their Head of Preliminary Design, Hans Amtmann, who had the necessary experience. [1] [2]
Structurally, the P 200 was a scaled-up BV 222 Wiking. It was bigger even than the BV 238, and only the Hughes H-4 Hercules has ever been bigger. [3]
Its hull accommodated three deck levels, providing luxury facilities for 120 passengers, with additional freight holds fore and aft.
The wing used Chief Designer Richard Vogt's standard technique of a tubular steel wing spar which also functioned as the main fuel tankage. Its section was thick enough for engineers to go along inside the wings and attend to the engines in flight. [3]
The P 200 was to be powered by eight BMW 803 series twin-radial engines, each driving a contra-rotating propeller and delivering 2,950 kilowatts (3,960 hp).
The BV 726 was a jet-powered development of the P 200, its 700 series number indicating that construction would not begin until some time after the war was over. [2]
Data from Pohlmann (1982) [4]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Hamburger Flugzeugbau (HFB) was an aircraft manufacturer, located primarily in the Finkenwerder quarter of Hamburg, Germany. Established in 1933 as an offshoot of Blohm & Voss shipbuilders, it later became an operating division within its parent company and was known as Abteilung Flugzeugbau der Schiffswerft Blohm & Voss from 1937 until it ceased operation at the end of World War II. In the postwar period it was revived as an independent company under its original name and subsequently joined several consortia before being merged to form Messerschmitt-Bölkow-Blohm (MBB). It participates in the present day Airbus and European aerospace programs.
The Blohm & Voss BV 238 was a German flying boat, built during World War II. It was the heaviest aircraft ever built when it first flew in 1944, and was the largest aircraft produced by any of the Axis powers during World War II.
The Blohm & Voss Ha 139 was a German all-metal inverted gull wing floatplane. With its four engines it was at the time one of the largest float-equipped seaplanes that had been built. The inboard engines were mounted at the joint between the inboard anhedral and outboard dihedral wing sections, above the pylon-mounted floats.
The Blohm & Voss BV 141 was a World War II German tactical reconnaissance aircraft, notable for its uncommon structural asymmetry. Although the Blohm & Voss BV 141 performed well, it was never ordered into full-scale production, for reasons that included the unavailability of the preferred engine and competition from another tactical reconnaissance aircraft, the Focke-Wulf Fw 189.
The Blohm & Voss BV 222 Wiking was a large six-engined German flying boat designed and built by the German aircraft manufacturer Blohm & Voss. It was the largest flying boat to attain operational status during the Second World War.
The BMW 803 was a German aircraft engine, an attempt by BMW to build a high-output aircraft engine by coupling two BMW 801 engines back-to-back, driving contra-rotating propellers. The result was a 28-cylinder, four-row radial engine, each comprising a multiple-bank in-line engine with two cylinders in each bank, which, due to cooling concerns, were liquid cooled.
The Blohm & Voss BV 144 was an advanced twin-engined commercial airliner developed by Germany during World War II but intended for post-war service. It was unusual in having a variable-incidence wing. Two prototypes were built by Breguet in France.
The Blohm & Voss P 194 was a German design for a mixed-power Stuka or ground-attack aircraft and tactical bomber, during World War II.
The Blohm & Voss Ha 140 was a German multi-purpose seaplane first flown in 1937. It was intended for use as a torpedo bomber or long-range reconnaissance aircraft but did not enter production.
The FGP 227 was a scale flying model of the Blohm & Voss BV 238 flying boat, built to provide data for the development of the BV 238.
The Hamburger Flugzeugbau Ha 136 was an all-metal, single-seat training monoplane. It was the first design for the company by Dr. Richard Vogt and the first to feature his trademark tubular steel wing spar which doubled as the main fuel tank. Two prototypes were built but it was not ordered into production.
The Blohm & Voss P 170 was a three-engined unarmed fast bomber and ground-attack aircraft project proposed by the aircraft manufacturer Blohm & Voss to the Luftwaffe during the Second World War.
The Blohm & Voss Bv P 188 was a long-range, heavy jet bomber design project by the Blohm & Voss aircraft manufacturing division during the last years of the Third Reich. It featured a novel W-wing planform with variable incidence.
The Blohm & Voss BV 237 was a German proposed dive bomber with an unusual asymmetric design based on the Blohm & Voss BV 141.
The Blohm & Voss P 163 was a design project for an unconventional bomber during World War II. Constructed mainly from steel, its crew were accommodated in large wingtip nacelles, giving it a triple-fuselage appearance. Its propeller drive system was also unusual, with the central fuselage containing twin engines coupled to a front-mounted contra-prop.
The Blohm & Voss P 203 was a design project for a heavy fighter during World War II. Capable of filling the roles of night fighter, light bomber and ground-attack, it had mixed propulsion, having both piston engine driven propellers and jet engines.
The Blohm & Voss P 204 was one of several design studies by Blohm & Voss for asymmetric dive bombers during World War II. It was also unusual in having hybrid propulsion comprising both piston and jet engines.
Hans Henry Amtmann was a German aircraft designer. He was best known for his work at Blohm & Voss, where he worked as Head of New Projects under Chief Designer Richard Vogt during the World War II era. After the war, he moved the United States as part of Operation Paperclip, where he worked on a variety of projects.
The Blohm & Voss P 184 was a German design for a long-range reconnaissance aircraft during World War II. Carrying a crew of five, it was of aerodynamically clean appearance and its wing had an unusually high aspect ratio.