The International Organization for Standardization is an international standard-setting body composed of representatives from various national standards organizations.
The International Federation for Information Processing (IFIP) is a global organisation for researchers and professionals working in the field of information and communication technologies (ICT) to conduct research, develop standards and promote information sharing.
Classification Markup Language (ClaML) is an xml data format specification meant for the exchange of medical classifications, which are code numbers for of medical diagnoses and procedures.
CEN/TC 125 is a technical decision making body within the CEN system working on standardization in the field of Masonry, including natural stone, in the European Union.
CEN/TC 251 is a technical decision making body within the European Committee for Standardization (CEN) working on standardization in the field of Health Information and Communications Technology (ICT) in the European Union. The goal is to achieve compatibility and interoperability between independent systems and to enable modularity in Electronic Health Record systems.
The ISO/TC 215 is the International Organization for Standardization's (ISO) Technical Committee (TC) on health informatics. TC 215 works on the standardization of Health Information and Communications Technology (ICT), to allow for compatibility and interoperability between independent systems.
Transport standards organisations is an article transport Standards organisations, consortia and groups that are involved in producing and maintaining standards that are relevant to the global transport technology, transport journey planning and transport ticket/retailing industry. Transport systems are inherently distributed systems with complex information requirements. Robust modern standards for transport data are important for the safe and efficient operation of transport systems. These include:
The EN 54 Fire detection and fire alarm systems is a mandatory standard that specifies requirements and laboratory test for every component of fire detection and fire alarm system and it allows the free movement of construction products between countries of the European Union market.
CEN/CENELEC Guide 6: Guidelines for standards developers to address the needs of older persons and persons with disabilities is a document for participants in standardisation activities at CEN and CENELEC that contains guidance for the creation and the revision of standards to ensure greater accessibility of products and services. The document is a "Guide", in other words, not a European Standard (EN). The guide is identical to ISO/IEC Guide 71 and was adopted by both the CEN Technical Board and the CENELEC Technical Board, and published in January 2002. The adoption of CEN/CENELEC Guide 6 resulted from a European mandate to the European standardisation organisations, and the European Commission is funding projects to promote the use of the Guide.
The following outline is provided as an overview of and topical guide to bicycles:
The system of concepts to support continuity of care, often referred to as ContSys, is an (ISO and CEN standard . Continuity of care is an organisational principle that represents an important aspect of quality and safety in health care. Semantic interoperability is a basic requirement for continuity of care. Concepts that are needed for these purposes must represent both the content and context of the health care services.
ISO/IEC JTC 1/SC 27 IT Security techniques is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 27 develops International Standards, Technical Reports, and Technical Specifications within the field of information and IT security. Standardization activity by this subcommittee includes general methods, management system requirements, techniques and guidelines to address both information security and privacy. Drafts of International Standards by ISO/IEC JTC 1 or any of its subcommittees are sent out to participating national standardization bodies for ballot, comments and contributions. Publication as an ISO/IEC International Standard requires approval by a minimum of 75% of the national bodies casting a vote. The international secretariat of ISO/IEC JTC 1/SC 27 is the Deutsches Institut für Normung (DIN) located in Germany.
ISO/IEC JTC 1/SC 2 Coded character sets is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of coded character sets. The international secretariat of ISO/IEC JTC 1/SC 2 is the Japanese Industrial Standards Committee (JISC), located in Japan.
ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of audio, picture, multimedia, and hypermedia information coding. The international secretariat of ISO/IEC JTC 1/SC 29 is the Japanese Industrial Standards Committee (JISC) located in Japan.
ISO/IEC JTC 1/SC 17 Cards and personal identification is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of identification cards and personal identification. The international secretariat of ISO/IEC JTC 1/SC 17 is the British Standards Institution (BSI) located in the United Kingdom.
ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques is a subcommittee of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) Joint Technical Committee (JTC) 1, and was established in 1996. SC 31 develops and facilitates international standards, technical reports, and technical specifications in the field of automatic identification and data capture techniques. The first Plenary established three working groups (WGs): Data Carriers, Data Content, and Conformance. Subsequent Plenaries established other working groups: RFID, RTLS, Mobile Item Identification and Management, Security and File Management, and Applications.
ASME B5 refers to a technical committee of the American Society of Mechanical Engineers and the standard they maintain which deals with machine tools.
CEN/TC 165 is a technical decision making body within the CEN system working on standardization in the field of wastewater engineering in the European Union. Its goal is to develop functional standards, and standards for performance and installation for systems and components in the field of wastewater engineering.
CEN/TC 12 is a technical decision making body within the CEN system working on materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries in the European Union. Its goal is to develop standards for materials, equipment, and offshore structures used in the drilling, production, transport by pipelines and processing of liquid and gaseous hydrocarbons.
CEN/TC 434 is a technical body within the European Committee for Standardization (CEN) developing standards in the field of Electronic Invoicing. CEN/TC 434 has developed the European Standard on Electronic Invicing and other ancillary standardization deliverables required by the European Directive 2014/55/EU.
