Cannone da 149/40 | |
---|---|
A battery of 149/40 guns. | |
Type | Heavy Gun |
Place of origin | Kingdom of Italy |
Service history | |
In service | 1940-1945 |
Used by | ![]() ![]() |
Wars | World War II |
Production history | |
Designer | Ansaldo |
Manufacturer | Ansaldo |
Produced | 1940-44 |
No. built | 51 by 1941 [1] |
Specifications | |
Mass | 11,340 kilograms (25,000 lb) |
Barrel length | 6.036 metres (19 ft 10 in) L/40 |
Shell | 45.96 kilograms (101.3 lb) |
Caliber | 149.1 mm (5.87 in) |
Carriage | Split trail |
Elevation | 0° to +45° |
Traverse | 60° |
Rate of fire | 1-2 rpm |
Muzzle velocity | 800 m/s (2,625 ft/s) |
Maximum firing range | 23,700 metres (25,900 yd) |
The Cannone da 149/40 was a heavy gun which served with Italy during World War II. It was intended to replace the obsolete Cannone da 149/35 A, but the small numbers produced prevented that. By 1940 orders had been placed for 590, but only 51 were in service at the end of September 1941. Weapons captured by the Germans after the Italian surrender in 1943 were put into service as the 15 cm K 408(i). Ansaldo produced a batch of twelve for the Germans in April 1944.
It was a good design despite the odd decision to use trail spade plates that had to be pounded into the ground to anchor the gun in place. Normally it was broken down into two loads for transport, but it could be further broken down into four loads for mountainous terrain.
The cannone da 65/17 modello 13 was an artillery piece developed by Italy for use with its mountain and infantry units. The designation means 65 mm calibre gun, barrel length 17 calibres, which entered service in 1913. The designation is often shortened to cannone da 65/17.
The Cannone da 75/27 modello 11 was a French-designed field gun produced in Italy prior to World War I. It was introduced in 1912, designed by Joseph-Albert Deport. It was taken into service by Italy for use with its Alpine and cavalry troops going into World War I, and was built there in large numbers. The gun was designed with two notable features. It was the first artillery piece to introduce the split trail, as well as the last to utilize its novel dual-recoil system. The former became a very popular feature on artillery pieces through to the modern day. The later, while functional, did not get repeated. The dual-recoil system consisted of a small tubular recoil under the barrel which in turn traveled in a traditional rectangular cradle. This lessened heat transfer from the gun barrel to the recoil mechanism effectively, but was not necessary for the added complexity.
The Cannone da 47/32 mod. 1935 was an Italian artillery piece that saw service during World War II. It was originally designed by Austrian firm Böhler, and produced in Italy under license. The Cannone da 47/32 was used both as an infantry gun and an anti-tank gun at which it was effective against light to medium armored tanks.
The Obice da 75/18 modello 34 was an Italian artillery piece used during World War II.
The Cannone da 90/53 was an Italian-designed cannon used both in an anti-aircraft role and as an anti-tank gun during World War II. It was one of the most successful anti-aircraft guns to see service during the conflict. The naval version of the gun was mounted on Italian battleships of the Littorio-class and the Andrea Doria-class.
The Canon de 105 mle 1913 Schneider was a French artillery piece used in World War I and World War II by many European countries.
The Semovente da 149/40 was an Italian self-propelled artillery piece designed in 1942. Only a single unit was built; this vehicle is displayed at the US Army Ordnance Museum, Aberdeen, Maryland.
The Cannone da 70/15 was a mountain gun was used by Italy during World War I. By World War II it had been relegated to the infantry gun role in units assigned to Italian East Africa.
The 10.4 cm Feldkanone M. 15 was a heavy field gun used by Austria-Hungary in World War I. It was derived from the successful 15 cm schwere Feldhaubitze M 14 modified to fire high-velocity 104-mm projectiles.
The Cannone da 149/35 A was a heavy gun which served with Italy during World War I and World War II. It was already an old-fashioned weapon when introduced around 1900. It lacked a recoil system of any kind and could not traverse. The gun recoiled up two ramps placed behind the wheels and had to be re-laid after every shot. Wheel plates were added to absorb more recoil energy and to help the gun cross soft ground. Despite these serious drawbacks, being cheap and easy to manufacture, the gun was produced in large numbers and saw extensive use during World War I. Some 895 were still in Italian service in June 1940 and saw use in World War II in Italy and North Africa, as well for coastal defense in France and the Balkans. Weapons captured by the Germans after the Italian surrender in 1943 seem to have been scrapped or ignored as there is no record of them in German service.
The Cannone da 152/45 modello 1911 was an Italian naval gun built by the Ansaldo company. It formed the secondary armament of the two Andrea Doria-class dreadnought battleships built during World War I. A number of guns were also converted to siege artillery and coastal artillery roles and served during both world wars.
The Cannone da 75/27 modello 06 was a field gun used by Italy during World War I and World War II. It was a license-built copy of the Krupp Kanone M 1906 gun. It had seats for two crewmen attached to the gunshield as was common practice for the period. Captured weapons were designated by the Wehrmacht during World War II as the 7.5 cm Feldkanone 237(i).
The Cannon 102/35 Model 1914 was a naval gun of the Royal Italian Navy in World War I and World War II, which was modified for shore based anti-aircraft, field artillery, railway gun and coastal artillery roles.
The Mortaio da 260/9 Modello 16 - was an Italian Heavy mortar and Siege Gun designed by the French Schneider Company and produced under license in Italy by Ansaldo and Vickers-Terni for the Italian Army. It was used by the Italian Army during both the First World War and Second World War.
The Obice da 280 was an Italian coastal defense and siege howitzer designed in 1884 by the British Armstrong firm and produced under license by the Ansaldo company during the late 1800s. It was used during both the First and Second World Wars.
The Canon de 19 modèle 1870/93 TAZ was a railway gun designed and built early in the First World War. It also saw action during the Second World War.
The Cannone da 149 G later known as the Cannone da 149/23 was an Italian fortress gun and siege gun which served with Italy during the Italo-Turkish War and World War I. Captured guns may have been used by Austria-Hungary.
The 15 cm Ring Kanone C/72 was a fortress and siege gun developed after the Franco-Prussian War and used by Germany and Portugal before and during World War I.
The Cannone da 381/40 AVS was an Italian railway gun that saw action during World War I.
The Cannone da 76/17 S modello 12 was a landing gun designed by Schneider-Creusot in France and built under license by Gio. Ansaldo & C. in Italy that was used by Italy during World War I and possibly World War II.