Chester Swee' Pea

Last updated
Chester Swee' Pea
Role Racing aircraft
National originUnited States of America
Designer Art Chester
First flight20 July 1947
Number built3

The Swee' Pea was a series of three midget aircraft racers designed by Art Chester. [1]

Contents

Design and development

The Swee' Pea was a racing aircraft to compete in the new midget racing class championed by race pilot Art Chester. The aircraft was the third design from Chester with a Popeye comic name.

The midget racer was required to have an engine less than 190 cubic inches in displacement at the time. The Swee' Pea shared a similar short, mid-wing taildragger configuration with other midget racers. The aircraft was unique in that it used a V tail configuration and a single cooling air intake through a large hole in the center of the spinner. [2] The Fuselage is welded tube steel with plywood covered wings.

Operational history

The Swee' Pea was introduced at the 1947 National Air Races, but the V-Tail performed poorly at takeoff speed, and was replaced by a conventional tail for the 1948 Miami races. The top speed was reduced with a conventional tail, so the V-Tail was re-installed.

Variants

Swee' Pea
Later Renamed "Sky Baby" - one built
Swee' Pea II
Modified with a Y-tail (similar to the Sonex Waiex). Art Chester died in a crash in this plane at the San Diego Air Races on 24 April 1949. - one built
Wimpy
The Swee' Pea modified with the main gear farther back. This aircraft crashed on 25 July 1948 at Rosemead airfield, due to blanking of the v-tail during a slow manoeuvre. - one built

Specifications (Chester Swee' Pea)

Data from Sport Aviation

General characteristics

Performance

See also

Related development

Related Research Articles

Mustang Aeronautics Midget Mustang

The Mustang Aeronautics Midget Mustang MM-1 is a single-seat aerobatic sports airplane developed and marketed in the United States for homebuilding. It is also known as the Long Midget. It was the predecessor to the Mustang II which is also known as the Bushby Mustang. Rights to both the Midget Mustang and the Mustang II were sold to Mustang Aeronautics in 1992.

Cassutt Special

The Cassutt Special is a single-seat sport and racing aircraft designed in the United States in 1951 for Formula One air races. Plans are still available for homebuilding. Designed by ex-TWA captain Tom Cassutt, it is a mid-wing cantilever monoplane with fixed tailwheel undercarriage. The fuselage and tail are of fabric-covered steel tube construction, and the wings are built from plywood over wooden ribs. An updated taper-wing design was first flown in 1971 on Jim Wilson's "Plum Crazy".

Church Midwing JC-1

The Church Midwing JC-1, a.k.a. Church Mid-Wing Sport, is a midwing racing aircraft designed by James Church using the fuselage of a Heath aircraft.

Dormoy Bathtub

The Dormoy Bathtub was a simple-to-construct, high wing racing aircraft of the 1920s.

Cessna CR-3

The Cessna CR-3 was a follow on racing aircraft to the Cessna CR-2 that raced in the 1932 National Air Races.

Chester Jeep

The Chester Jeep aka the Chester Special #1 was an air racer built by Art Chester for the 1932 National Air Races. The aircraft once held the world's speed record for aircraft at 237 mph (381 km/h).

Chester Goon

The Chester Goon aka The Chester Special #2 was a single-engine taildragger-configuration monoplane racer built for the 1938 National Air Races.

Art Chester (1899–1949) was an American barnstormer and air racer of the 1930s and 1940s. Chester was instrumental in the development of the Menasco Pirate and Buccaneer inverted inline engines. He was also the designer of the propeller spinner and engine front cowling for the North American North American P-51 fighter.

Folkerts SK-2

The Folkerts SK-2, also known as Speed King Two, "Toots" and "Miss Detroit" was a racer built for the 1936 National Air Races

Wittman Chief Oshkosh

Chief Oshkosha.k.a.Buster is a homebuilt racing plane designed to compete in the 1931 American Cirrus Races.

Wittman D-12 Bonzo

The Wittman D-12 "Bonzo" was an air racer designed by Steve Wittman for the Thompson Trophy races. The aircraft's top speed of 325 mph (523 km/h) made it faster than any United States military aircraft of the era.

Folkerts SK-3

The Folkerts SK-3 a.k.a. "Jupiter, Pride of Lemont was the third in a series of air racers developed by Clayton Folkerts.

Howard DGA-3

The Howard DGA-3 "Pete", a.k.a. "Damned Good Airplane – 3", "Baker Special", and "Little Audrey" was the third aircraft built by Ben Howard, and the first in a series of racing aircraft. Howard claimed that the aircraft was so fast from his use of "Go Grease".

Howard DGA-4

The Howard DGA-4 a.k.a. Mike, and DGA-5 a.k.a. Ike and "Miss Chevrolet" was the next in a series of racers from Ben Howard. He built two examples, "Mike" and "Ike", each with a different landing gear design.

Wittman DFA

The Wittman DFA aka Little Bonzo is a homebuilt racing aircraft designed to compete in midget racing.

Nicholas-Beazley Pobjoy Special

The Nicholas-Beazley Pobjoy Special aka the Nicholas-Beazley Phantom I, aka the Wittman Phantom, aka the Flagg Phantom, aka the Reaver Special was a world record holding air racer of the 1930s

Crosby CR-4

The Crosby CR-4 is a racing aircraft developed in the late 1930s

Polen Special

The Polen Special, is a homebuilt racing aircraft built to become the fastest four cylinder aircraft in the world.

The Christensen Zipper is an air racer that was built to compete in the Goodyear midget air races.

Loving WR-1 Love

The Loving/Wayne WR-1 Love is a single seat, midget racer built in the 1950s.

References

  1. Popular Science. January 1958.Missing or empty |title= (help)
  2. Sport Aviation. September 1958.Missing or empty |title= (help)