Directive 2012/18/EU or the Seveso-III Directive (full title: Directive 2012/18/EU of the European Parliament and of the Council of 4 July 2012 on the control of major-accident hazards involving dangerous substances, amending and subsequently repealing Council Directive 96/82/EC) is a European Union directive aimed at controlling major chemical accident hazards. Seveso-III is implemented in national legislation and is enforced by national chemical safety authorities.
The Seveso-III Directive aims at preventing such incidents and minimising their risks. All EU countries are obliged to adopt measures at national and company level to prevent major accidents and to ensure appropriate preparedness and response should such accidents nevertheless happen. Industrial plants in the European Union are covered by the provisions of the Directive if dangerous substances are or could be present in the ‘establishment’ in quantities exceeding the relevant thresholds mentioned in the Directive. More than 12 000 establishments in the EU are covered by the requirements.
Seveso-III replaces the previous Seveso-I (Directive 82/501/EC) and Seveso-II (Directive 96/82/EC) Directives, updating the laws due to changes in chemical classification regulations, for example. Seveso-III gets its name from the Seveso disaster, which occurred in 1976 in Italy. Seveso-III establishes minimum quantity thresholds for reporting and safety permits. There are two lists: one names individual substances, and another designates hazard categories for those substances not named separately. Documents required based on hazard and quantity are notification, Major Accident Prevention Policy (MAPP) and Seveso Safety Report.
Today there are more than 12 000 establishments in the EU are covered by the Seveso-III Directive.
Establishments covered by Seveso are split into two categories:
The main sectors covered are power generation, supply and distribution (13% of establishments); fuel storage (10%); general chemicals manufacture (9%) and wholesale and retail (8%).
Citizens who live in an area potentially affected by a major accident involving dangerous substances, the EU legislation requires that Citizens are involved in the decision making, even if the establishment concerned is located in a neighbouring EU country.
Citizens will be consulted when:
The Seveso Directive - Technological Disaster Risk Reduction
The Mutual Joint Visit Programme for Seveso Inspections
The Seveso disaster was an industrial accident that occurred around 12:37 pm on 10 July 1976, in a small chemical manufacturing plant approximately 20 kilometres (12 mi) north of Milan in the Lombardy region of Italy. It resulted in the highest known exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in residential populations, which gave rise to numerous scientific studies and standardized industrial safety regulations, including the European Union's Seveso III Directive. This accident was ranked eighth in a list of the worst man-made environmental disasters by Time magazine in 2010.
A safety data sheet (SDS), material safety data sheet (MSDS), or product safety data sheet (PSDS) is a document that lists information relating to occupational safety and health for the use of various substances and products. SDSs are a widely used type of fact sheet used to catalogue information on chemical species including chemical compounds and chemical mixtures. SDS information may include instructions for the safe use and potential hazards associated with a particular material or product, along with spill-handling procedures. The older MSDS formats could vary from source to source within a country depending on national requirements; however, the newer SDS format is internationally standardized.
The Dangerous Substances Directive was one of the main European Union laws concerning chemical safety, until its full replacement by the new regulation CLP Regulation (2008), starting in 2016. It was made under Article 100 of the Treaty of Rome. By agreement, it is also applicable in the EEA, and compliance with the directive will ensure compliance with the relevant Swiss laws. The Directive ceased to be in force on 31 May 2015 and was repealed by Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.
A chemical accident is the unintentional release of one or more hazardous chemicals, which could harm human health and the environment. Such events include fires, explosions, and release of toxic materials that may cause people illness, injury, or disability. Chemical accidents can be caused for example by natural disasters, human error, or deliberate acts for personal gain. Chemical accidents are generally understood to be industrial-scale ones, often with important offsite consequences. Unintended exposure to chemicals that occur at smaller work sites, as well as in private premises during everyday activities are usually not referred to as chemical accidents.
The Emergency Planning and Community Right-to-Know Act of 1986 is a United States federal law passed by the 99th United States Congress located at Title 42, Chapter 116 of the U.S. Code, concerned with emergency response preparedness.
The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) is an internationally agreed-upon standard managed by the United Nations that was set up to replace the assortment of hazardous material classification and labelling schemes previously used around the world. Core elements of the GHS include standardized hazard testing criteria, universal warning pictograms, and safety data sheets which provide users of dangerous goods relevant information with consistent organization. The system acts as a complement to the UN numbered system of regulated hazardous material transport. Implementation is managed through the UN Secretariat. Although adoption has taken time, as of 2017, the system has been enacted to significant extents in most major countries of the world. This includes the European Union, which has implemented the United Nations' GHS into EU law as the CLP Regulation, and United States Occupational Safety and Health Administration standards.
The Control of Major Accident Hazards Regulations 2015 (COMAH) are the enforcing regulations within the United Kingdom of the Seveso III Directive devised in Brussels following the Seveso disaster. They are applicable to any establishment storing or otherwise handling large quantities of industrial chemicals of a hazardous nature. Types of establishments include chemical warehousing, chemical production facilities and some distributors.
The Control of Substances Hazardous to Health Regulations 2002 is a United Kingdom Statutory Instrument which states general requirements imposed on employers to protect employees and other persons from the hazards of substances used at work by risk assessment, control of exposure, health surveillance and incident planning. There are also duties on employees to take care of their own exposure to hazardous substances and prohibitions on the import of certain substances into the European Economic Area. The regulations reenacted, with amendments, the Control of Substances Hazardous to Work Regulations 1999 and implement several European Union directives.
Right to know is a human right enshrined in law in several countries. UNESCO defines it as the right for people to "participate in an informed way in decisions that affect them, while also holding governments and others accountable". It pursues universal access to information as essential foundation of inclusive knowledge societies. It is often defined in the context of the right for people to know about their potential exposure to environmental conditions or substances that may cause illness or injury, but it can also refer more generally to freedom of information or informed consent.
Council Directive 96/82/EC of 9 December 1996 on the control of major-accident hazards involving dangerous substances is a European Union law aimed at improving the safety of sites containing large quantities of dangerous substances. It is also known as the Seveso II Directive, after the Seveso disaster. It replaced the Seveso Directive and was in turn modified by the Seveso III directive (2012/18/EU).
The CLP Regulation is a European Union regulation from 2008, which aligns the European Union system of classification, labelling and packaging of chemical substances and mixtures to the Globally Harmonised System (GHS). It is expected to facilitate global trade and the harmonised communication of hazard information of chemicals and to promote regulatory efficiency. It complements the 2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulation and replaces an older system contained in the Dangerous Substances Directive (67/548/EEC) and the Dangerous Preparations Directive (1999/45/EC).
Hazard statements form part of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). They are intended to form a set of standardized phrases about the hazards of chemical substances and mixtures that can be translated into different languages. As such, they serve the same purpose as the well-known R-phrases, which they are intended to replace.
The Brandweerinformatiecentrum voor gevaarlijke stoffen/Information Centre for Dangerous Goods (BIG), established in the Flemish city of Geel, collects and validates information on dangerous goods.
European hazard symbols for chemicals are pictograms defined by the European Union for labelling chemical packaging and containers. They are standardised currently by the CLP/GHS classification.
Directive 82/501/EC was a European Union law aimed at improving the safety of sites containing large quantities of dangerous substances. It is also known as the Seveso Directive, after the Seveso disaster. It was superseded by the Seveso II Directive and then Seveso III directive.
Chemical safety includes all those policies, procedures and practices designed to minimize the risk of exposure to potentially hazardous chemicals. This includes the risks of exposure to persons handling the chemicals, to the surrounding environment, and to the communities and ecosystems within that environment. Manufactured chemicals, either pure or in mixtures, solutions and emulsions, are ubiquitous in modern society, at industrial, occupational and private scale. However, there are chemicals that should not mix or get in contact with others, as they can produce byproducts that may be toxic, carcinogenic, explosive etc., or can be dangerous in themselves. To avoid disasters and mishaps, maintaining safety is paramount.
A pesticide, also called Plant Protection Product (PPP), which is a term used in regulatory documents, consists of several different components. The active ingredient in a pesticide is called “active substance” and these active substances either consist of chemicals or micro-organisms. The aims of these active substances are to specifically take action against organisms that are harmful to plants. In other words, active substances are the active components against pests and plant diseases.
On 14 January 2020, there was a major explosion at the Chemical Industries of Ethylene Oxide (IQOXE) site in Tarragona, Catalonia, Spain. Three people died, although none of the fatalities were on-site, and seven people were injured because of the explosion.