EC Regulation 1223/2009 on cosmetics

Last updated

EC Regulation 1223/2009 on cosmetics sets binding requirements for cosmetic products that have been made available on the market within the European Union. Manufacturers of products that fall under the category or cosmetics are required to abide by this regulation as they prepare their initial release of products and while continuing to sell said products within the Member States of the EU. [1]

Contents

Description

EC Regulation 1223/2009 [2] was created by the European Parliament and Council with the intent of establishing standards for cosmetic products that are available on the market. Compliance to these standards helps protect the functioning of the internet market, but most importantly, it provides a high-level of protection for the safety and health of EU citizens. [1] The Regulation was set into force on July 11, 2013. [3]

Regulated aspects

In its quest to protect the health and safety of EU citizens, EC Regulation 1223/2009 regulates a multitude of aspects related to the manufacturing and labeling of products that are considered to fall into the category of cosmetics. [1] [4]

Responsibility and accountability for safety

Before a cosmetic product can be released on the market, proof must be provided that it is safe for human health during the course of its intended use or what is considered to be reasonable foreseeable conditions of its use. Article 3 of EC Regulation 1223/2009 builds upon Directive 87/357/EEC guidelines regarding the safety of the product in reference to its instructions for use, its disposal and most importantly, its labeling. A safety assessment must be performed and a cosmetic product safety report provided to demonstrate compliance with Article 3. Guidelines for the report are found in the Regulations Annex I.

Under Article 4 of the Regulation, a representative of the manufacturer must be named as the “responsible person” for dealing with compliance with EC 1223/2009. This responsible person is responsible for ensuring that the manufacturer remains in compliance before and after bringing their cosmetic product to market.

In the event the cosmetic product does not meet the requirements of compliance under the Regulation, the responsible person must address those issues. If the manufacturer becomes aware that the cosmetic product presents a threat to human health, the responsible person must notify the competent authorities within each Member State where the product is available. The notification would include details of the risks of using the product, non-compliance issues and what corrective actions will be performed. Corrective actions may include withdrawing the product from the market or initiating product recalls. [2]

Maintaining an accessible product information file

Another responsibility of the responsible person is that they must maintain a product information file for each cosmetic product that is put on the market by his or her company under Article 11 of EC 1223/2009. This file must remain accessible to the relevant competent authority and / or government for at least 10 years after the last batch of the product was placed on the market. The product information file at minimum must contain information and data regarding the description of the cosmetic product, safety reports regarding the product, and evidence that the product performs according to manufacturer claims. Additionally, data about any product testing on animals that may have been performed by the manufacturer, agents of the manufacturer or suppliers must be included in the information file. [2]

Oversight of sampling and analysis of cosmetic products

Under Article 12 of EC 1223/2009 requires that cosmetic products must be sampled and analyzed in a reliable and reproducible manner. If local Community legislation, as what might be found in a Directive is non-existent, the assumption will be that the manufacturer will rely on methods of harmonized standards that have been published in the Official Journal of the European Union. [1]

Obligation to supply information

The appointed responsible person must supply information to the EU Commission according to the guidelines provided under Article 13 of the Regulation before their cosmetic product can be placed on the market. This information includes the name and category of the product, contact information for the responsible person, the product’s country of origin, and Member State(s) where the product where be sold. [2]

Labeling requirements for cosmetic products

Before placing cosmetic products on the market, the manufacturer must comply with container and packaging labeling guidelines under EC 1223/2009. To comply with the Regulation all required information must be presented in a legible and indelible manner.

Information to be included shall include:

The date itself or details of where it appears on the packaging shall be preceded by the symbol shown in point 3 of Annex VII or the words: ‘best used before the end of’. The date of minimum durability shall be clearly expressed and shall consist of either the month and year or the day, month and year, in that order. If necessary, this information shall be supplemented by an indication of the conditions which must be satisfied to guarantee the stated durability. Indication of the date of minimum durability shall not be mandatory for cosmetic products with a minimum durability of more than 30 months. For such products, there shall be an indication of the period of time after opening for which the product is safe and can be used without any harm to the consumer. This information shall be indicated, except where the concept of durability after opening is not relevant, by the symbol shown in point 2 of Annex VII followed by the period (in months and/or years) (Regulation 1223/2009 EU; Chapter VI, Art 19)

Exceptions are made for individual labeling for smaller items that allow for product information to appear as a notice on or nearby the container where the cosmetic product is displayed for sale. The function, amount, precautions, and warnings must be translated into the language of the destination country. A full translation of all label elements is requested by Austria, Bulgaria, France, Poland, Portugal and Slovakia.

Allergens

On 26 July 2023, the EU Commission published Commission Regulation (EU) 2023/1545, which amends the cosmetic regulation 1223/2009 and added extra ingredients to the list of declarable allergens [5]

Restrictions for hazardous ingredients and animal testing

Certain product ingredients are prohibited under Chapter IV of EC 1223/2009 based on their threat to human health. The Annexes are lists of chemical substances that are either banned or restricted for use in specific product types or to certain limits in the final product. These are as follows:

Annex II List of substances prohibited in cosmetic products

Annex III List of substances which cosmetics should not contain except subject to the restrictions laid down

Annex IV List of colorants allowed in cosmetic products

Annex V List of preservatives allowed in cosmetic products

Annex VI List of UV filter allowed in cosmetic products


Chapter V addresses the prohibition of animal testing with the final formulation of cosmetic products, before being placed on the market and when testing methods are other than the alternative methods that have been validated and adopted by the EU Community. [2] [6]

As a regulation, EC No 1233/2009 supersedes previous Directives that applied to cosmetic manufacturers throughout the European Union. As of 30 November 2009, all Member States are required to adhere to the guidelines for compliance to this regulation. Regulations carry more legal weight than Directives, which generally provide guidance in good practices that should be followed by individual Member States.

In the event of non-compliance, the relevant competent authority will inform the competent authority of the responsible person’s Member State. When there are grounds for concern or certainty exists that the cosmetic product presents a serious risk to human health, the authority will take steps toward instituting appropriate provisional measures to withdraw, recall or restrict the availability of the non-complying product. [2]

Related Research Articles

<span class="mw-page-title-main">Cosmetics</span> Substances applied to the body to change appearance or fragrance

Cosmetics are constituted mixtures of chemical compounds derived from either natural sources, or synthetically created ones. Cosmetics have various purposes. Those designed for personal care and skin care can be used to cleanse or protect the body or skin. Cosmetics designed to enhance or alter one's appearance (makeup) can be used to conceal blemishes, enhance one's natural features, add color to a person's face, or change the appearance of the face entirely to resemble a different person, creature or object. Due to the harsh ingredients in makeup products, individuals with acne-prone skin are more likely to suffer from breakouts. Cosmetics can also be designed to add fragrance to the body.

<span class="mw-page-title-main">Methylisothiazolinone</span> Chemical compound

Methylisothiazolinone, MIT, or MI, is the organic compound with the formula S(CH)2C(O)NCH3. It is a white solid. Isothiazolinones, a class of heterocycles, are used as biocides in numerous personal care products and other industrial applications. MIT and related compounds have attracted much attention for their allergenic properties, e.g. contact dermatitis.

<span class="mw-page-title-main">CE marking</span> European Declaration of conformity mark

The presence of the logo on commercial products indicates that the manufacturer or importer affirms the goods' conformity with European health, safety, and environmental protection standards. It is not a quality indicator or a certification mark. The CE marking is required for goods sold in the European Economic Area (EEA); goods sold elsewhere may also carry the mark.

<span class="mw-page-title-main">Directive 67/548/EEC</span>

The Dangerous Substances Directive was one of the main European Union laws concerning chemical safety, until its full replacement by the new regulation CLP Regulation (2008), starting in 2016. It was made under Article 100 of the Treaty of Rome. By agreement, it is also applicable in the EEA, and compliance with the directive will ensure compliance with the relevant Swiss laws. The Directive ceased to be in force on 31 May 2015 and was repealed by Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006.

Type approval or certificate of conformity is granted to a product that meets a minimum set of regulatory, technical and safety requirements. Generally, type approval is required before a product is allowed to be sold in a particular country, so the requirements for a given product will vary around the world. Processes and certifications known as type approval in English are often called homologation, or some cognate expression, in other European languages.

The law in the United Kingdom on food information and labelling is multifaceted and is spread over many reforms and parliamentary acts. UK law is based on the relevant European Union rules, chiefly Regulation (EU) 1169/2011, which is implemented in the UK in the Food Information Regulations 2014, the Food Information (Wales) Regulations 2014, the Food Information (Scotland) Regulations 2014 and the Food Information Regulations 2014. Regulations apply to the labelling of goods pre-packaged for sale and to the provision of information regarding non-prepacked (loose) foods.

In the experimental (non-clinical) research arena, good laboratory practice or GLP is a quality system of management controls for research laboratories and organizations to ensure the uniformity, consistency, reliability, reproducibility, quality, and integrity of products in development for human or animal health through non-clinical safety tests; from physio-chemical properties through acute to chronic toxicity tests.

<span class="mw-page-title-main">Battery Directive</span>

The Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC, commonly known as the Battery Directive, regulates the manufacture and disposal of batteries in the European Union with the aim of "improving the environmental performance of batteries and accumulators".

<span class="mw-page-title-main">General Product Safety Regulations 2005</span> United Kingdom legislation

The General Product Safety Regulations 2005 is a 2005 statutory instrument of the Parliament of the United Kingdom that demands that "No producer shall [supply or] place a [consumer] product on the market unless the product is a safe product" and provides broad enforcement powers. The regulations implemented European Union directive 2001/95/EC and revoked the General Product Safety Regulations 1994. The regulations also repealed section 10 of the Consumer Protection Act 1987 which had previously imposed a more limited general safety requirement.

A European Authorised Representative (E.A.R.) serves as a legal entity designated by non European Union (EU) manufacturers, to represent them in the EU and ensure their compliance with the European Directives. The CE certificate and declaration of conformity can only be issued by a company located in the European Union.

<span class="mw-page-title-main">Cosmetics Directive</span> 1976 European Union law

Council Directive 76/768/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to cosmetic products was the main European Union law on the safety of cosmetics. It was made under Art. 100 of the Treaty of Rome. By agreement, it was also applicable in the European Economic Area.

In the European Union, the Qualified Person Responsible For Pharmacovigilance (QPPV) is an individual, usually an employee of a pharmaceutical company, who is personally responsible for the safety of the human pharmaceutical products marketed by that company in the EU. This function was established in 2004 by article 23 of regulation (EC) No 726/2004. The article establishes that the holder of a marketing authorization for a drug for human use must have a QPPV. When a company submits an application for permission to bring a medicinal product onto the market, the company submits a description of its system for monitoring the safety of the product in actual use and proof that the services of a QPPV are in place.

The Biocidal Products Directive (BPD) also known as the Biocides Directive is European Union Directive, (98/8/EC), which concerns biocides. It is officially known as Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market. In 2013 the Biocidal Products Directive was superseded by The Biocidal Products Regulation.

<span class="mw-page-title-main">Regulation (EU) No. 305/2011</span>

Regulation No. 305/2011 of the European Parliament and of the Council of the European Union is a regulation of 9 March 2011 which lays down harmonised conditions for the marketing of construction products and replaces Construction Products Directive (89/106/EEC). This EU regulation is designed to simplify and clarify the existing framework for the placing on the market of construction products. It replaced the earlier (1989) Construction Products Directive (89/106/EEC).

Market surveillance for products ensures that products on the market conform to applicable laws and regulations. This helps to foster trust among consumers buying products or financial services and protects consumers and professionals from harm from non-compliant products. It also helps companies that comply to stay in business and avoid losing market share to rogue traders.

The Machinery Directive, Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 is a European Union directive concerning machinery and certain parts of machinery. Its main intent is to ensure a common safety level in machinery placed on the market or put in service in all member states and to ensure freedom of movement within the European Union by stating that "member states shall not prohibit, restrict or impede the placing on the market and/or putting into service in their territory of machinery which complies with [the] Directive".

The ISO 22715 standardCosmetics — Packaging and labelling provides guidelines for manufacturers in the best practices for cosmetic packaging and labelling of all cosmetic products. This standard applies to products that fall under the category of cosmetics that are sold or given away as free samples. ISO 22715 was initially published in April 2006.

<span class="mw-page-title-main">Cosmetic packaging</span> Packaging for cosmetics

The term cosmetic packaging is used for containers and secondary packaging of fragrances and cosmetic products. Cosmetic products are substances intended for human cleansing, beautifying and promoting an enhanced appearance without altering the body's structure or functions.

<span class="mw-page-title-main">Regulation of pesticides in the European Union</span>

A pesticide, also called Plant Protection Product (PPP), which is a term used in regulatory documents, consists of several different components. The active ingredient in a pesticide is called “active substance” and these active substances either consist of chemicals or micro-organisms. The aims of these active substances are to specifically take action against organisms that are harmful to plants. In other words, active substances are the active components against pests and plant diseases.

<span class="mw-page-title-main">Regulation (EU) 2017/745</span> Political regulation

Regulation (EU) 2017/745 is a regulation of the European Union on the clinical investigation and sale of medical devices for human use. It repeals Directive 93/42/EEC (MDD), which concerns medical devices, and Directive 90/385/EEC, which concerns active implantable medical devices, on 26 May 2021.

References

  1. 1 2 3 4 Turner, Dawn M. (12 December 2016). "EC Regulation 1223/2009 on cosmetics". Desjardin. Retrieved 19 April 2023.
  2. 1 2 3 4 5 6 Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products
  3. ↑ "Safer cosmetics for people in the EU". EUR-Lex. Retrieved 19 April 2023.
  4. ↑ Mildau, G.; Huber, B. "The New EC Cosmetics Regulation 1223/2009 – Contents and First Explanations" (PDF). International Journal for Applied Science - Personal Care - Detergents - Specialties. Retrieved 19 April 2023.[ dead link ]
  5. ↑ Commission Regulation (EU) 2023/1545 of 26 July 2023 amending Regulation (EC) No 1223/2009 of the European Parliament and of the Council as regards labelling of fragrance allergens in cosmetic products (Text with EEA relevance), 2023-07-26, retrieved 2023-08-04
  6. ↑ "On cosmetic products" (PDF). Center for Sustainability and Commerce, Duke University. 30 November 2009. Archived from the original (PDF) on 9 March 2013. Retrieved 19 April 2023.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.