CBA 123 Vector | |
---|---|
![]() | |
In flight at the 1990 Farnborough Air Show. | |
Role | Light business aircraft or 19-seat regional airliner |
Manufacturer | Embraer/Fábrica Militar de Aviones |
First flight | 18 July 1990 |
Status | Prototype |
Number built | Two; third prototype unfinished |
Developed from | Embraer EMB 120 [1] |
Developed into | Embraer ERJ 145 |
The Embraer/FMA CBA 123 Vector (originally EMB 123 for Embraer and IA 70 for FMA) was a 1990 turboprop aircraft designed for regional flights, to carry up to 19 passengers. The program arose from a partnership between the Brazilian company Embraer and the Argentine FMA. The project was an advanced turboprop aircraft for its time, including advanced technology in avionics, aerodynamics, and propulsion. [2]
By 1985, economic integration of South America seemed to be in progress with advances in the negotiations of Mercosur between the Brazilian and Argentine governments. Meanwhile, in 1985, the Brazilian aircraft manufacturer Embraer, having commenced production of its EMB 120 Brasilia 30-seat turboprop airliner, started the design process for a 19-seat airliner to replace Embraer's aging EMB 110 Bandeirante. In 1986, as a way of encouraging partnership between both countries, an agreement to develop a Brazilian-Argentine aircraft was signed between Embraer and the Argentine company Fabrica Militar de Aviones (FMA). [3] Initially called the EMB 123, the aircraft was expected to sell for USD$3 million and earn sales of USD$750 million through the year 2000. [4] The name "CBA" stood for "Cooperación Brasil-Argentina" (Spanish), and "Cooperação Brasil-Argentina" (Portuguese), meaning Brazil-Argentina Cooperation. [5]
Initially, the costs and workload of the project were divided between Embraer (67%) and FMA (33%). FMA was assigned production of the wings, fins, and rudders. The original plan for the fuselage was to use a stretched version of Embraer's EMB 121 Xingu, but the cooperative decided to use a shorter version of the Brasilia. [6] First flight was originally planned for 1988, and then customer delivery would occur in 1990. [7] The work assignment on the Argentine side was later changed to the central fuselage, rear fuselage, and horizontal stabilizers. [8]
In September 1987, the Garrett Engine Division of AlliedSignal was named as the CBA 123's engine supplier. [8] The engine selected was the TPE331-16, [9] which was soon renamed as the TPF351-20. [10] To validate that the rear-mounted turboprop configuration was viable, Embraer performed flight tests of a Garrett TPE331-12B engine attached to the aft fuselage of a Brasilia testbed aircraft, registration number PT-ZBA, in early 1989. [11] The tests confirmed that the engine layout resulted in lower cabin noise and vibration. [12]
In mid-1989, the CBA 123 was branded as the "Time Machine". [12] However, by the first quarter of 1990, the cooperative was sponsoring a competition to choose a new name for the CBA 123. [13] The aircraft was named the "Vector" during ceremonies for its inaugural flight, [14] which occurred on 18 July 1990 [3] without incident. The official presentation on 30 July 1990 was attended by Brazil President Fernando Collor de Mello and Argentine President Carlos Menem. [2] The CBA 123 now had 130 soft orders, mostly from U.S. companies. [15] After 10 test flights and 30 flight hours, the Vector was flown from Brazil across the Atlantic Ocean to be presented at the Farnborough Air Show in early September 1990. [16] By the fourth quarter of 1990, the aircraft had reached an estimated price of about USD$5 million, which was thought to be around USD$1 million more expensive than competing 19-seat turboprops. [17] But in November 1990, Embraer began cutting nearly 4,000 jobs from its 12,800-employee workforce, while announcing a one-year delay in CBA 123 program development. [18] By this time, Embraer expected aircraft production to start in May 1993. [17] The second Vector prototype made its initial flight in March 1991, as the cooperative attempted to make some equipment items optional instead of standard to reduce the aircraft price. [19] The second prototype flew at the 1991 Paris Air Show in June, by which time the aircraft had accumulated 400 hours of flight testing. [20]
Unfortunately for Embraer and FMA, the high technology which would ensure the success of the CBA 123 was one of the reasons of its demise. The final unit cost of the aircraft was too high to be absorbed by the market. Also, new investments from the Brazilian Government became unavailable due to the political crisis caused by the impeachment process and resignation of President Collor de Mello.[ citation needed ] In addition, Embraer claimed that electronics suppliers increased their prices and demanded advance payments due to Embraer's financial difficulties at the time, which caused the aircraft price to become more expensive. [15]
The third prototype (LV-X134), to be built by FMA, was stopped at 80% (est.) of building and now is stored in Argentina. [21]
The CBA 123 Vector project, which cost US$300 million, was therefore cancelled, with only two prototypes built. Although a failure, the project gave Embraer maturity to work with new technologies, which led to the development of the successful Embraer ERJ 145 family of jets. Upon the return of founder Ozires Silva as Embraer's leader in 1992, he faced the choice of whether to continue with the CBA 123 or the ERJ 145. Silva initially wanted to postpone the ERJ 145 in favor of certifying the CBA 123, which was in a more advanced state of development, but the company's U.S. representatives convinced him to proceed instead with the ERJ 145 based on the regional jet segment's better market outlook. The rear-engined ERJ 145 had the same Brasilia-derived fuselage cross-section as the CBA 123, so the ERJ 145 was basically a stretch of the CBA 123 with turbofans instead of turboprops. Much of the CBA 123 development work fed into the development of the ERJ 145. [15]
Some of these new technologies on the CBA 123 were described in the Federal Aviation Administration response to a request for certification of the aircraft: "This airplane incorporates a number of novel or unusual design features, such as digital avionics including, but not necessarily limited to, an electronic flight instrument system (EFIS), attitude and heading reference system (AHRS), engine indication and crew alerting system (EICAS), and full authority digital engine control (FADEC), which are vulnerable to lightning and high-intensity radiated fields (HIRF) external to the airplane. In addition to these novel or unusual design features, the Model CBA-123 also incorporates other unrelated novel or unusual design features. Those features will be the subject of separate notices of proposed special conditions". [22]
The aircraft was designed as a high-technology turboprop aircraft, to be fully certified under United States FAR 25. [5] It was powered by two Garrett TPF351 turboprop engines (more powerful derivatives of Garrett's popular TPE331) mounted on pylons on the rear fuselage and driving six-bladed pusher configuration scimitar propellers, [23] which spun on a plane of rotation that was 12 feet (3.7 m) behind the nearest row of seats. [24] The engine location allowed a smaller wing to be used, giving a higher cruise speed, while also improving passenger comfort. [25] Noise was estimated to be an average volume of 74–76 decibels within the cabin during cruise, and the cooperative claimed the aircraft was noticeably quieter than a Boeing 737-300. [12] The engines used alternative gearbox modules, so the propellers could be set up to rotate in either direction to support the counter-rotating propeller configuration of the CBA 123. The initial configuration had the port propeller turning clockwise, while the starboard propeller turned counterclockwise. [26] Rotational speed of the Hartzell HC-E6A-5 propellers was up to 1,700 rpm, and at cruise the propellers turned at 1,445 rpm. [20] Propeller diameter was 2.59 meters (102 inches). [27]
The aircraft design had wings with supercritical airfoils, used a FADEC system for engine control, plus EICAS and EFIS avionics systems. [28] Fastest cruise speed was about 350–360 knots (650–670 km/h; 400–410 mph) at an altitude of around 7,600 m (25,000 ft). Most economical cruise altitude was at 9,100–10,700 m (30,000–35,000 ft). [20]
To celebrate its 40th anniversary, Embraer restored its two prototype CBA 123 aircraft and donated them to Brazilian aviation museums. The work began in early 2008 and was completed in May 2009. The aircraft are on public display at the following locations: [29]
In June 2013, the uncompleted FMA-built third prototype was put on outdoor display at the School of Exact Sciences of the National University of Córdoba (UNC), in Córdoba, Argentina. [31]
Data from Jane's All The World's Aircraft 1993–94 [32]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Embraer S.A. is a Brazilian multinational aerospace corporation. It develops and manufactures aircraft and aviation systems, and provides leasing, equipment, and technical support services. Embraer is the third largest producer of civil aircraft worldwide after Boeing and Airbus. The company also has a significant presence in military aviation, ranking among the top 100 defense contractors. It is headquartered in São José dos Campos, São Paulo, Brazil, with offices and operations in China, the Netherlands, Portugal, Singapore, and the United States.
The Embraer ERJ family are regional jets designed and produced by the Brazilian aerospace company Embraer. The family includes the ERJ 135, ERJ 140, and ERJ 145, as well as the Legacy 600 business jet and the R-99 family of military aircraft.
A propfan, also called an open rotor engine, open fan engine or unducted fan, is a type of aircraft engine related in concept to both the turboprop and turbofan, but distinct from both. The design is intended to offer the speed and performance of a turbofan, with the fuel economy of a turboprop. A propfan is typically designed with a large number of short, highly twisted blades, similar to the (ducted) fan in a turbofan engine. For this reason, the propfan has been variously described as an "unducted fan" (UDF) or an "ultra-high-bypass (UHB) turbofan".
The Rolls-Royce AE 2100 is a turboprop developed by Allison Engine Company, now part of Rolls-Royce North America. The engine was originally known as the GMA 2100, when Allison was a division of former corporate parent General Motors.
The Handley Page HP.137 Jetstream is a small twin-turboprop airliner, with a pressurised fuselage. The aircraft was designed to meet the requirements of the United States commuter and regional airline market. The design was later improved and built by British Aerospace as the BAe Jetstream 31 and BAe Jetstream 32, featuring different turboprop engines.
The Beechcraft Starship is a twin-turboprop six- to eight-passenger pressurized business aircraft produced by Beech Aircraft Corporation. Notable for its unusual canard design and extensive use of carbon fiber composite, it did not sell many units and production ceased in 1995, only six years after the Starship's first flight.
The Pratt & Whitney Canada PW100 aircraft engine family is a series of 1,800 to 5,000 shaft horsepower turboprops manufactured by Pratt & Whitney Canada. Pratt & Whitney Canada dominates the turboprops market with 89% of the turboprop regional airliner installed base in 2016, leading GE Aviation and Allison Engine Company.
The Embraer EMB 120 Brasilia is a twin-turboprop 30-passenger commuter airliner designed and manufactured by the Brazilian aircraft manufacturer Embraer.
The Embraer EMB 110 Bandeirante is a Brazilian twin-turboprop light transport aircraft designed by Embraer for military and civil use.
The Embraer EMB 121 Xingu is a twin-turboprop fixed-wing aircraft built by the Brazilian aircraft manufacturer, Embraer. The design is based on the EMB 110 Bandeirante, using its wing and engine design merged with an all-new fuselage. The EMB 121 first flew on 10 October 1976.
The Embraer Legacy 600 is a business jet derivative of the Embraer ERJ family of commercial jet aircraft.
The Rolls-Royce AE 3007 is a turbofan engine produced by Rolls-Royce North America, sharing a common core with the Rolls-Royce T406 and AE 2100. The engine was originally developed by the Allison Engine Company, hence the "AE" in the model number.
The General Electric GE36 was an experimental aircraft engine, a hybrid between a turbofan and a turboprop, known as an unducted fan (UDF) or propfan. The GE36 was developed by General Electric Aircraft Engines, with its CFM International equal partner Snecma taking a 35 percent share of development. Development was cancelled in 1989.
The Piper PA-31 Navajo is a family of twin-engined utility aircraft designed and built by Piper Aircraft for small cargo and feeder airlines, and as a corporate aircraft. Production ran from 1967 to 1984. It was license-built in a number of Latin American countries.
The Honeywell TPE331 is a turboprop engine. It was designed in the 1950s by Garrett AiResearch, and produced since 1999 by successor Honeywell Aerospace. The engine's power output ranges from 575 to 1,650 shaft horsepower.
The Embraer EMB 312 Tucano is a low-wing, tandem-seat, single-turboprop, basic trainer and counter-insurgency aircraft that was developed and is produced by Embraer in Brazil. The Brazilian Air Force sponsored the EMB-312 project at the end of 1978. Design and development work began in 1979 on a low-cost, relatively simple, new basic trainer with innovative features which eventually became the international standard for basic training aircraft. The prototype first flew in 1980, and initial production units were delivered in 1983.
The I.A. 50 Guaraní II is an Argentine utility aircraft designed at the DINFIA in the early 1960s.
The Avtek 400A was an American prototype turboprop-powered business aircraft developed in the early 1980s. It was of unusual and distinctive configuration: a low-wing monoplane with two pusher engines mounted above the wings, and a large canard mounted atop the forward fuselage. The aircraft's sleek, futuristic design earned it a guest appearance on the Airwolf TV series as the X-400, the plane used by the villain Lou Stappleford in the episode Eagles.
The Garrett TPF351 is a turboprop engine designed by Garrett Engine Division of AlliedSignal Aerospace Company. Initiated by Garrett in October 1987, the TPF351-20 engine was selected by Embraer to power the Embraer/FMA CBA 123 Vector, a high-speed commuter "pusher" aircraft. It was first tested on May 19, 1989 and then ground tested and flight tested on a Boeing 720 on July 9, 1990. The first prototype CBA 123 was tested on July 18, 1990, followed by a flight to the Farnborough Air Show in September of the same year. Both programs were cancelled in 1992, when the TPF351 was nine months from engine certification.
The Rolls-Royce RB529 Contrafan was a high-thrust aircraft engine proposed by Rolls-Royce in the 1980s to power long-range wide-body airliners.