Genie (pinball)

Last updated
Genie
GeniePinballFlyer.jpg
Manufacturer Gottlieb
Release dateNovember 1979
Design Ed Krynski
ArtworkGordon Morison
Music{{{composer}}}
Production run6,800

Genie is a widebody pinball machine designed by Ed Krynski and released in 1979 by Gottlieb. It features a jinn theme and was advertised with the slogans "Gottlieb's WIDE and Beautiful BODY" [1] and "A Wide-Body Pinball absolutely bulging with player appeal and proven massive profit earning capacity!". [2]

Contents

Description

Genie is considered Gottlieb's answer to Bally’s super wide pinball machine Paragon and the start of a competition of a “wider is better” pinball design in the late 1970s. A typical game from this era was 22″ (56 cm) wide and 51.5″ (131 cm) long. While Paragon is 28.5″ (73 cm) by 51.5″ (131 cm), Genie has the dimensions of 28.5″ (73 cm) by 55″ (140 cm). [2] [3]

Genie features 5 flippers and an upper mini playfield. [1] [3]

Gameplay

One of the main objectives is to increase the end-of-ball Bonus Value, which can be done by hitting various targets scattered throughout the table. Most drop targets, rollovers, and spot targets increase the Bonus Value by 1,000 points, up to a maximum of 29,000 points. The Bonus Multiplier starts at 1x and can be increased to a maximum of 5x, achieved by hitting one of the four yellow drop targets in the center of the playfield when the "BONUS LIT" light is on. The maximum bonus is 145,000 points.

When the Bonus Value reaches 20,000, a "SCORE BONUS" hole is lit; slotting the ball in this hole scores a bonus and resets the Bonus Value counter.

Extra balls can be earned by either completing all four A-B-C-D rollovers, hitting all red drop targets in the upper playfield, hitting all white drop targets in the upper playfield. Once the player has completed any of these actions, the corresponding spot target will light up. Hitting a lit spot target rewards the player with an extra ball.

Design team

Digital versions

Genie is available as a licensed table of The Pinball Arcade for several platforms, where is an option to set 3 or 5 balls per game. The game is also an included in the Pinball Hall of Fame: The Gottlieb Collection .

See also

Related Research Articles

<span class="mw-page-title-main">Pinball</span> Arcade entertainment machine

Pinball games are a family of games in which a ball is propelled into a specially designed table where it bounces off various obstacles, scoring points either en route or when it comes to rest. Historically the board was studded with nails called 'pins' and had hollows or pockets which scored points if the ball came to rest in them. Today, pinball is most commonly an arcade game in which the ball is fired into a specially designed cabinet known as a pinball machine, hitting various lights, bumpers, ramps, and other targets depending on its design. The game's object is generally to score as many points as possible by hitting these targets and making various shots with flippers before the ball is lost. Most pinball machines use one ball per turn, and the game ends when the ball(s) from the last turn are lost. The biggest pinball machine manufacturers historically include Bally Manufacturing, Gottlieb, Williams Electronics and Stern Pinball.

A glossary of terms, commonly used in discussing pinball machines.

<i>The Addams Family</i> (pinball) Pinball machine adaptation of the 1991 film of the same name

The Addams Family is a pinball machine released in March 1992. It was designed by Pat Lawlor and Larry DeMar and released by Midway. It was based on the 1991 film of the same name, and features custom speech by the stars of the film, Anjelica Huston and Raul Julia. It is the best-selling solid state pinball machine of all time with 20,270 units sold.

<i>Star Trek: The Next Generation</i> (pinball) 1993 pinball machine

Star Trek: The Next Generation is a widebody pinball game, designed by Steve Ritchie and released in November 1993 by Williams Electronics. It was part of WMS' SuperPin series, and was based on the TV series. It is the only pinball machine that features three separate highscore-lists. Apart from the regular highscore-list and the buy-in-list, it also features a reminiscence to The Machine: Bride of Pin*Bot billionaires club. It is also the third pinball game overall based on the Star Trek franchise, following the 1979 pinball game by Bally, and the 1991 game by Data East, and preceding the 2013 pinball game by Stern.

<i>Twilight Zone</i> (pinball) 1993 pinball machine

Twilight Zone is a widebody pinball machine, designed by Pat Lawlor and based on the TV series of the same name. It was first released in 1993 by Midway. This game is part of WMS' SuperPin line of widebody games alongside Star Trek: The Next Generation and Indiana Jones: The Pinball Adventure.

<i>High Speed</i> (pinball) 1986 pinball machine

High Speed is a pinball game designed by Steve Ritchie and released by Williams Electronics in 1986. It is based on Ritchie's real-life police chase inside a 1979 Porsche 928. He was finally caught in Lodi, California on Interstate 5 and accused of speeding at 146 miles per hour (235 km/h).

<i>Indiana Jones: The Pinball Adventure</i> 1993 pinball machine

Indiana Jones: The Pinball Adventure is a 1993 widebody pinball game designed by Mark Ritchie and released by Williams. It was based on the Indiana Jones movies. It was also part of WMS' SuperPin series of widebody games.

<i>Demolition Man</i> (pinball) 1994 pinball machine

Demolition Man is a Williams pinball machine released in February 1994. It is based on the motion picture of the same name. It is part of WMS' SuperPin line of widebody games.

Bad Cats is a pinball machine released in November 1989 by Williams. It was designed by Barry Oursler and Python Anghelo.

<i>The Flintstones</i> (pinball) A pinball game

The Flintstones is a pinball game released by Williams in 1994 and based on the movie of the same name which is based on 1960–1966 animated television series of the same name. This machine is not to be confused with another pinball machine, a redemption game, based on the TV series and also released in 1994, manufactured by Innovative Concepts in Entertainment (ICE).

Doctor Who is a pinball machine designed by Bill Pfutzenreuter (Pfutz) and Barry Oursler, and released by Midway in September 1992. It is based on the television series Doctor Who. As stated in the Gameplay section, the rulesheet is rather different from other pinball machines released at the time, which didn't help popularity as casual players did not understand the complex rule changes that occur during the game.

<i>Creature from the Black Lagoon</i> (pinball) 1992 pinball machine

Creature from the Black Lagoon is a pinball machine designed by John Trudeau and released by Midway. It is loosely based on the movie of the same name. The game's theme is 1950s drive-in theater. The pinball game was licensed from Universal Studios by Bally so that all backglass and cabinet artwork and creature depictions would resemble those of the original movie.

<i>Jack-Bot</i> 1995 pinball game

Jack-Bot is a 1995 pinball game which was designed by Barry Oursler and Larry DeMar, and released by Williams. It is the third game in the Pin-Bot series, following Pin-Bot (1986) and The Machine: Bride of Pin-Bot (1991).

<i>Central Park</i> (pinball) 1966 pinball machine

Central Park is a pinball machine that was released by Gottlieb in 1966. The game was sold in 3,100 units. It was designed by Ed Krynski and the art was done by Roy Parker.

Police Force is a 1989 Williams pinball machine. The pinball machine was initially supposed to be released as Batman pinball, the police car was to be the Batmobile and the Jail was to be the Bat Cave. The machine features anthropomorphic jungle animals in the roles of police and robbers.

<i>Judge Dredd</i> (pinball) 1993 pinball machine

Judge Dredd is a four-player pinball game produced by Bally Manufacturing in 1993, based on the British comic strip Judge Dredd in 2000 AD. Nearly 7,000 were made.

<i>Comet</i> (pinball) 1985 pinball machine

Comet is a pinball machine released by Williams in June 1985. It was designed by Barry Oursler, who was inspired by the Comet roller coaster at Riverview Park in Chicago, and was the first in an amusement park themed pinball trilogy followed by Cyclone in 1988 and Hurricane in 1991.

<i>Teed Off</i>

Tee'd Off is a pinball machine designed by Ray Tanzer and Jon Norris and released by Gottlieb in May 1993.

<i>Mata Hari</i> (pinball) 1977 pinball machine

Mata Hari is a pinball machine created by Bally Manufacturing in 1977 and released in 1978. The theme of the game is based on Dutch exotic dancer, Mata Hari. It was mainly produced using solid-state electronics but also 170 electro-mechanical versions were released. It was the last model manufactured by Bally in two such versions. Approximately 20 sample games were produced with a plastic playfield, instead of the traditional wooden playfield.

<i>Hurricane</i> (pinball) 1991 pinball machine

Hurricane is a pinball machine released by Williams Electronics in August 1991. It was designed by Barry Oursler as the third game in Oursler's amusement park themed pinball trilogy. The first being Comet, released in 1985, and the second being Cyclone, released in 1988.

References

  1. 1 2 "Internet Pinball Machine Database: Gottlieb 'Genie'".
  2. 1 2 "1979 Gottlieb Genie Repair |".
  3. 1 2 "Genie". Archived from the original on 2015-05-17. Retrieved 2015-08-06.