H&E Paramotores Simonini

Last updated

Simonini
Role Paramotor
National origin Spain
Manufacturer H&E Paramotores
StatusProduction completed

The H&E Paramotores Simonini is a Spanish paramotor that was designed and produced by H&E Paramotores of Madrid for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly. [1]

Contents

Design and development

The Simonini was designed to comply with the US FAR 103 Ultralight Vehicles rules as well as European regulations. It features a paraglider-style wing, single-place accommodation and a single Simonini Racing engine in pusher configuration with a reduction drive and a 99 to 120 cm (39 to 47 in) diameter two-bladed wooden propeller, depending on the model. The fuel tank capacity is 9 litres (2.0 imp gal; 2.4 US gal). [1]

As is the case with all paramotors, take-off and landing is accomplished by foot. Inflight steering is accomplished via handles that actuate the canopy brakes, creating roll and yaw. [1]

Variants

Simonini 99
Model with a Simonini Racing engine in pusher configuration with a 2.3:1 ratio reduction drive and a 99 cm (39 in) diameter two-bladed wooden propeller. The empty weight is 28 kg (62 lb). [1]
Simonini 120
Model with a Simonini Racing engine in pusher configuration with a 2.5:1 ratio reduction drive and a 120 cm (47 in) diameter two-bladed wooden propeller. The empty weight is 29 kg (64 lb). [1]

Specifications (Simonini 120)

Data from Bertrand [1]

General characteristics

Related Research Articles

The Adventure S series is a family of French paramotors that was designed and produced by Adventure SA of Méré, Yonne for powered paragliding. Now out of production, when they were available the aircraft were supplied complete and ready-to-fly.

The Back Bone Seraph is a family of French paramotors that was designed by Thierry Simonet and produced by Back Bone of Tallard for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Back Bone Shadow is a family of French paramotors that was designed by Thierry Simonet and produced by Back Bone of Tallard for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The D'Yves Yvasion 2000 is a family of French paramotors that was designed by Yves Hélary and produced by D'Yves Air Pub of La Chapelle-en-Vexin for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Dynamic Sport Climber is a series of Polish paramotors designed and produced by Dynamic Sport of Kielce for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Fly Castelluccio Mach is a family of Italian paramotors that was designed and produced by Fly Castelluccio of Ascoli Piceno for powered paragliding. Now out of production, when it was available the aircraft were supplied complete and ready-to-fly.

The Fly Castelluccio SMN is an Italian paramotor that was designed and produced by Fly Castelluccio of Ascoli Piceno for powered paragliding. Now out of production, when it was available the aircraft were supplied complete and ready-to-fly.

The Paraavis Vityaz is a Russia paramotor, designed and produced by Paraavis of Moscow for powered paragliding. The aircraft is supplied complete and ready-to-fly.

The Marbella Parapente Paramotor PAP is a family of Spanish paramotors that was designed by Pierre Aubert and produced by Marbella Parapente of Málaga for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Paramotor Mosquito is a Polish paramotor that was designed by Ryszrd Zygadio and produced by Paramotor Napedy Paralotniowe of Warsaw for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The H&E Paramotores Corsario is a Spanish paramotor that was designed and produced by H&E Paramotores of Madrid for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The H&E Paramotores Solo is a Spanish paramotor that was designed and produced by H&E Paramotores of Madrid for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The H&E Paramotores Ziklon is a Spanish paramotor that was designed and produced by H&E Paramotores of Madrid for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Parasport.de Fun is a family of German paramotors that was designed and produced by Parasport.de of Schwanewede for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Reflex Bi Trike is a French paramotor that was designed by Dominique Cholou and produced by Reflex Paramoteur of Chatou for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Reflex S is a French paramotor that was designed by Dominique Cholou and produced by Reflex Paramoteur of Chatou for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Skyrunner Booster is a Russian paramotor that was designed and produced by Skyrunner Paramotor Laboratory of Pskov for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Sokopf Falke is an Austrian paramotor that was designed by Uli Sokopf and produced by his company Sokopf of Innsbruck for powered paragliding. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

The Walkerjet Simon is a family of Czech paramotor designs that were designed by Victor Procházka and produced by Walkerjet of Třemošná for powered paragliding. Now out of production, when they were available the aircraft were supplied complete and ready-to-fly.

The Winds Italia Orbiter is a family of Italian paramotors that were designed by Randy Haney and produced by his company Winds Italia of Bologna for powered paragliding. Now out of production, when the series was available the aircraft were supplied complete and ready-to-fly.

References

  1. 1 2 3 4 5 6 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 72. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X