High-explosive incendiary/armor-piercing ammunition

Last updated
Raufoss Mk 211 Raufoss NM140 MP (en).svg
Raufoss Mk 211

High-explosive incendiary/armor-piercing ammunition (HEIAP) is a form of shell which combines armor-piercing capability and a high-explosive effect. In this respect it is a modern version of an armor-piercing shell. The ammunition may also be called semi-armor-piercing high-explosive incendiary (SAPHEI). [1]

Typical of a modern HEIAP shell is the Raufoss Mk 211 [2] designed for weapons such as heavy machine guns and anti-materiel rifles.

The primary purpose of these munitions is armor penetration with better beyond-armor effects. [3] Similarly to SLAP rounds (saboted light armor penetrator) which get their armor-piercing ability from the propulsion of a 7.62 mm tungsten heavy alloy bullet from a 12.7 mm barrel (.50 caliber) using a sabot with much more energy than is usually possible from a 7.62 mm round, HEIAP munitions utilize a similar theory with an added explosive effect at the end. The special effect is developed when the round strikes the target. The initial collision ignites the incendiary material in the tip, triggering the detonation of the HE charge. The second (zirconium powder) incendiary charge will also ignite. This burns at a very high temperature, is not easily extinguished, and can last up to 15 minutes.[ citation needed ]

The remaining element of the round is the tungsten carbide penetrator. This has a large amount of kinetic energy and will penetrate the armor as a solid-cored armor-piercing shot would. This takes the incendiary material and about 20 steel fragments (created by the explosives), delivering them in a 25–30 degree cone through the armor, increasing lethality. [3]

The triggering of the explosive charge is dependent upon the resistance of the target. If the target offers little resistance then the lack of frictional heating will prevent the incendiary from igniting and the high explosive from detonating.

Exploding ammunition was used by both Allied and German forces during World War II.

Related Research Articles

<span class="mw-page-title-main">M61 Vulcan</span> 20 mm Gatling-type rotary cannon

The M61 Vulcan is a hydraulically, electrically, or pneumatically driven, six-barrel, air-cooled, electrically fired Gatling-style rotary cannon which fires 20 mm × 102 mm rounds at an extremely high rate. The M61 and its derivatives have been the principal cannon armament of United States military fixed-wing aircraft for over sixty years.

<span class="mw-page-title-main">Kinetic energy penetrator</span> High density non-explosive projectile

A kinetic energy penetrator (KEP), also known as long-rod penetrator (LRP), is a type of ammunition designed to penetrate vehicle armour using a flechette-like, high-sectional density projectile. Like a bullet or kinetic energy weapon, this type of ammunition does not contain explosive payloads and uses purely kinetic energy to penetrate the target. Modern KEP munitions are typically of the armour-piercing fin-stabilized discarding sabot (APFSDS) type.

<span class="mw-page-title-main">Armour-piercing ammunition</span> Ammunition type designed to penetrate armour

Armour-piercing ammunition (AP) is a type of projectile designed to penetrate armour protection, most often including naval armour, body armour, and vehicle armour.

<span class="mw-page-title-main">Terminal ballistics</span> Projectiles behavior after reaching their targets

Terminal ballistics is a sub-field of ballistics concerned with the behavior and effects of a projectile when it hits and transfers its energy to a target.

<span class="mw-page-title-main">.50 BMG</span> Rifle cartridge designed by John Moses Browning

The .50 BMG, also known as 12.7×99mm NATO, and designated as the 50 Browning by the C.I.P., is a .50 in (12.7 mm) caliber cartridge developed for the M2 Browning heavy machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard service cartridge for NATO forces. The cartridge itself has been made in many variants: multiple generations of regular ball, tracer, armor-piercing (AP), incendiary, and saboted sub-caliber rounds. The rounds intended for machine guns are made into a continuous ammunition belt using metallic links.

<span class="mw-page-title-main">Shell (projectile)</span> Payload-carrying projectile

A shell, in a military context, is a projectile whose payload contains an explosive, incendiary, or other chemical filling. Originally it was called a bombshell, but "shell" has come to be unambiguous in a military context. A shell can hold a tracer.

<span class="mw-page-title-main">Anti-personnel weapon</span> Materiel designed to kill and injure infantry units

An anti-personnel weapon is a weapon primarily used to maim or kill infantry and other personnel not behind armor, as opposed to attacking structures or vehicles, or hunting game. The development of defensive fortification and combat vehicles gave rise to weapons designed specifically to attack them, and thus a need to distinguish between those systems and ones intended to attack people. For instance, an anti-personnel landmine will explode into small and sharp splinters that tear flesh but have little effect on metal surfaces, while anti-tank mines have considerably different design, using much more explosive power to effect damage to armored fighting vehicles, or use explosively formed penetrators to punch through armor plating.

<span class="mw-page-title-main">GAU-8 Avenger</span> American 30mm autocannon (since 1977)

The General Electric GAU-8/A Avenger is a 30 mm hydraulically driven seven-barrel Gatling-style autocannon that is primarily mounted in the United States Air Force's Fairchild Republic A-10 Thunderbolt II. Designed to destroy a wide variety of ground targets, the Avenger delivers 30mm rounds at a high rate of fire. The GAU-8/A is also used in the Dutch Goalkeeper CIWS ship weapon system, which provides defense against short-range threats such as highly maneuverable missiles, aircraft, and fast-maneuvering surface vessels. The GAU-8/A was designed by General Electric and has been produced by General Dynamics since 1977.

<span class="mw-page-title-main">Sabot (firearms)</span> High velocity projectile alignment device

A sabot is a supportive device used in firearm/artillery ammunitions to fit/patch around a projectile, such as a bullet/slug or a flechette-like projectile, and keep it aligned in the center of the barrel when fired. It allows a narrower projectile with high sectional density to be fired through a barrel of much larger bore diameter with maximal accelerative transfer of kinetic energy. After leaving the muzzle, the sabot typically separates from the projectile in flight, diverting only a very small portion of the overall kinetic energy.

<span class="mw-page-title-main">Armour-piercing discarding sabot</span> Anti-tank projectile

Armor-piercing discarding sabot (APDS) is a type of spin-stabilized kinetic energy projectile for anti-armor warfare. Each projectile consists of a sub-caliber round fitted with a sabot. The combination of a lighter sub-caliber projectile with a full-caliber propellant charge allows for an increase in muzzle velocity compared to full-caliber rounds, giving the round increased armor-penetration performance. To further enhance their armor-penetration capabilities, APDS rounds typically feature a hardened core made from tungsten or another hard, dense material.

<span class="mw-page-title-main">30 mm caliber</span> Specific size of autocannon ammunition

The 30 mm caliber is a range of autocannon ammunition. It includes the NATO standardized Swiss 30×173mm, the Soviet 30×155mmB, 30×165mm and 30×210mmB, the Czechoslovak 30×210mm, the Yugoslav 30×192mm, the British 30×113mmB, and the French 30×150mmB and 30×170mm cartridges.

The following is a list of ammunition fired by the 125 mm smoothbore gun series used in the T-64, T-72, T-80, M-84, T-90, PT-91, T-14 Armata, and other tanks derived from those designs, as well as the 2A45 Sprut anti-tank gun.

20 mm caliber is a specific size of popular autocannon ammunition. The dividing line between smaller-caliber weapons, commonly called "guns", from larger-caliber "cannons", is conventionally taken to be the 20 mm round, the smallest caliber of autocannon. All 20 mm cartridges have an outside projectile (bullet) diameter and barrel bore diameter of approximately 0.787 inches (20.0 mm). These projectiles are typically 75 to 127 mm (3–5 in) long, cartridge cases are typically 75 to 152 mm (3–6 in) long, and most are shells, with an explosive payload and detonating fuze.

<span class="mw-page-title-main">Mk44 Bushmaster II</span> 30 mm chain gun

The Mk44 Bushmaster II is a 30 mm chain gun manufactured by Northrop Grumman. It is a derivative of the 25 mm M242 Bushmaster, and uses 70% of the same parts as the M242 while increasing the firepower by as much as 50% with the 20% increase in caliber size. The barrel is chromium-plated for extended life. The gun uses standard GAU-8 Avenger ammunition that is available in API, HEI and APFSDS-T variants.

<span class="mw-page-title-main">14.5 × 114 mm</span> Heavy machine gun and anti-material rifle cartridge

The 14.5×114mm is a heavy machine gun and anti-materiel rifle cartridge used by the Soviet Union, the former Warsaw Pact, modern Russia, and other countries.

In warfare, high-explosive incendiary (HEI) is a type of ammunition specially designed to impart energy and therefore damage to its target in one or both of two ways: via a high-explosive charge and/or via its incendiary (fire-causing) effects. Each round has both capabilities.

<span class="mw-page-title-main">Raufoss Mk 211</span> .50 caliber (12.7×99mm NATO) ammunition type

The Raufoss Mk 211 is a .50 BMG multi-purpose anti-materiel high-explosive incendiary/armor-piercing ammunition projectile produced by Nammo under the model name NM140 MP. It is commonly referred to as multipurpose or Raufoss, meaning red waterfall in Norwegian. This refers to Nammo's precursor company Raufoss Ammunisjonsfabrikker, an ammunition manufacturer established 1896 in Raufoss, Norway. The "Mk 211" name comes from the nomenclature Mk 211 Mod 0 used by the U.S. military for this round.

<span class="mw-page-title-main">Armour-piercing fin-stabilized discarding sabot</span> Ammunition type for tanks

Armour-piercing fin-stabilized discarding sabot (APFSDS), long dart penetrator, or simply dart ammunition is a type of kinetic energy penetrator ammunition used to attack modern vehicle armour. As an armament for main battle tanks, it succeeds armour-piercing discarding sabot (APDS) ammunition, which is still used in small or medium caliber weapon systems.

<span class="mw-page-title-main">Ammunition</span> Material fired, scattered, dropped, or detonated from a weapon or weapon system

Ammunition is the material fired, scattered, dropped, or detonated from any weapon or weapon system. Ammunition is both expendable weapons and the component parts of other weapons that create the effect on a target.

<span class="mw-page-title-main">Oerlikon KBA</span> Swiss autocannon

The Oerlikon KBA is a 25 mm (25×137mm) autocannon, developed as a close range multipurpose weapon for the mechanised battlefield, originally made by Oerlikon and currently produced in Rheinmetall Italia S.p.A. facilities. It is a positively locked breech, gas and recoil operated cannon with a rotating bolt head and a dual-belt selective feed system taking a 25mm NATO cartridge. The rate of fire in burst mode is up to 600 rounds per minute but it can be adjusted electronically and reduced to single shot or a selectable range from 100 up to 175 rounds per minute.

References

  1. "PGU-27A/B TP/ PGU-28A/B SAPHEI / PGU-30A/B TP-T" . Retrieved 2008-09-28.
  2. "Nammo Ammunition Handbook" (PDF).
  3. 1 2 Pike, John. "Mark 211 .50-caliber Multipurpose Ammunition". www.globalsecurity.org. Retrieved 2017-08-12.

See also