Hopfner HS-10/32

Last updated
HS-10/32 and HS-10/33
Hirtenberger HS 10 photo Le Pontentiel Aerien Mondial 1936.jpg
RoleAirliner
National originAustria
Manufacturer Hopfner
Designer Theodor Hopfner
First flight1932
Number built4

The Hopfner HS-10/32 was a utility aircraft manufactured in Austria in the early 1930s.It was a conventional, high-wing, strut-braced cabin monoplane derived from Hopfner's series of parasol-wing light aircraft that began with the HS-5/28. Three examples (including the single prototype) flew in late 1932 under the designation HS-10/32, followed by a single example of the improved HS-10/33 the following year, a generally similar aircraft with revised ailerons. The HS-10/33 was eventually purchased by the Austrian Air Force to use as a liaison machine.

Contents


Specifications (HS-10/32)

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Zlín Z-26</span> Type of aircraft

The Zlin Z-26 Trener was a tandem-seat basic training aircraft built by the Czechoslovakian company Moravan. A low-wing monoplane of largely wooden construction, it was developed into a series of all-metal trainers. Several were also produced in aerobatic variants, known as the Akrobat.

<span class="mw-page-title-main">Henschel Hs 130</span> German military aircraft

The Henschel Hs 130 was a German high-altitude reconnaissance and bomber aircraft developed in World War II. It suffered from various mechanical faults and was never used operationally, only existing as prototype airframes.

<span class="mw-page-title-main">Boeing B-1</span> Type of aircraft

The Boeing B-1 was a small biplane flying boat designed by William Boeing shortly after World War I.

<span class="mw-page-title-main">Blériot-SPAD S.33</span> Type of aircraft

The Bleriot-SPAD S.33 was a small French airliner developed soon after World War I. The aircraft was a biplane of conventional configuration whose design owed much to the Blériot company's contemporary fighter designs such as the S.20. Four passengers could be accommodated in an enclosed cabin within the monocoque fuselage, and a fifth passenger could ride in the open cockpit beside the pilot. A great success, the S.33 dominated its field throughout the 1920s, initially on CMA's Paris-London route, and later on continental routes serviced by Franco-Roumaine.

<span class="mw-page-title-main">Breda A.4</span> Type of aircraft

The Breda A.4 was a biplane trainer produced in Italy in the mid-1920s. It was of conventional configuration with a two-bay unstaggered wing cellule and seating for the pilot and instructor in tandem open cockpits. Apart from civil use, the A.4 was also adopted by the Regia Aeronautica as a trainer. At least some examples were produced in floatplane configuration as the A.4idro.

<span class="mw-page-title-main">Caspar C 32</span> Type of aircraft

The Caspar C 32 was an aircraft developed in Germany for aerial spraying in the late 1920s. It was a single-bay biplane with staggered, equal-span wings that accommodated the pilot and a single passenger or observer in tandem open cockpits. A small, additional horizontal stabiliser was fitted near the top of the tall single tail fin above the main horizontal stabiliser.

<span class="mw-page-title-main">Hirtenberg HS.9</span> Type of aircraft

The Hirtenberg HS.9 was an Austrian two-seat touring or training aircraft of the early 1930s.

<span class="mw-page-title-main">Focke-Wulf A 20 Habicht</span> Airliner developed in Germany in the late 1920s

The Focke-Wulf A 20 Habicht was an airliner developed in Germany in the late 1920s. It was a high-wing cantilever monoplane with fixed tailskid undercarriage. The fuselage was deep and seated four passengers in a fully enclosed cabin. The type was not bought by the airlines and only a few examples were built.

The Focke-Wulf Fw 43 Falke - known internally to Focke-Wulf as the A 43 - was a light utility aircraft developed in Germany in 1932. The last project undertaken by the company under the technical direction of Henrich Focke, it was a high-wing strut-braced monoplane of conventional design, with fixed tailwheel undercarriage. The pilot and two passengers sat in a fully enclosed cabin. Only a single example was built.

<span class="mw-page-title-main">Lohner L</span> Type of aircraft

The Lohner L was a reconnaissance flying boat produced in Austria-Hungary during World War I. It was a two-bay biplane of typical configuration for the flying boats of the day, with its pusher engine mounted on struts in the interplane gap. The pilot and observer sat side by side in an open cockpit, and both the upper and lower sets of wings featured sweepback.

The Hopfner HV-3/27 was a small airliner built in Austria in the late 1920s. A development of the HV-2, it was a conventional, high-wing cantilever monoplane with a fully enclosed cabin and a strong resemblance to the contemporary Fokker F.II. A single example was built in 1927 and used by Hopfner's own airline until 1934.

The Hopfner HV-4/28 was a small airliner built in Austria in the late 1920s. An enlarged version of the HV-3/27, it was a conventional, high-wing cantilever monoplane with a fully enclosed cabin. A single example was built in 1928 and saw heavy use by the airline that year. In 1929, it received a major refurbishment that included a change or powerplant from the original Heiro to a Gnome et Rhône 9A Jupiter engine and was sold to a private owner under the new designation HV-8/29GR. This aircraft was still flying at the time of the Anschluß, after which it received a new German registration.

<span class="mw-page-title-main">Hopfner HS-5/28</span> Type of aircraft

The Hopfner HS-5/28 was a utility aircraft built in Austria in the late 1920s. It was a conventional, parasol-wing monoplane with seating for two occupants in tandem, open cockpits. The landing gear was of fixed, tailskid type with divided main units. Two examples were built with Walter NZ60 engines, followed by two more with the more powerful NZ85 for Swiss aeroclub use. One of these latter machines remained in service until 1934.

<span class="mw-page-title-main">Hopfner HS-8/29</span> Utility Aircraft

The Hopfner HS-8/29 was a utility aircraft built in Austria in the late 1920s based on the Hopfner HS-5/28. It used a modernised version of its predecessor's airframe, being a conventional, parasol-wing monoplane with seating for two occupants in tandem, open cockpits. The landing gear was of fixed, tailskid type with divided main units. The first prototype used the same Walter NZ 85 engine that the later HS-5/28s had used, but this was followed by 14 production examples with Siemens engines, and a single prototype with a de Havilland Gipsy III.

The Hopfner HV-6/28 was a small airliner built in Austria in the late 1920s for Swiss use. Unrelated to Hopfner's other airliners of the period, the HV-6/28 was a conventional, high-wing, strut-braced monoplane with a fully enclosed cabin. The main units of the fixed tailskid undercarriage were divided. The single example built was flown by Aero St. Gallen between 1929 and 1931, and then scrapped.

<span class="mw-page-title-main">Hopfner HA-11/33</span> Type of aircraft

The Hopfner HA-11/33 was an amphibious flying boat built in Austria in 1933 to a specification by the Dr. Oetker company. The result was a conventional, high-wing cantilever monoplane with a stepped flying boat hull and pontoons on struts under the wings at mid-span. The cabin was fully enclosed, and the twin engines were mounted tractor-fashion on struts above the wing.

<span class="mw-page-title-main">Potez 32</span> Type of aircraft

The Potez 32 and its military version the Potez 33 was a single-engine French monoplane transport built by Potez and based on the Potez 29 biplane.

<span class="mw-page-title-main">Keystone Pronto</span> 1920s US mail plane design

The Keystone K-55 Pronto was a mail plane developed in the United States in the late 1920s.

<span class="mw-page-title-main">Henschel Hs 121</span> Type of aircraft

The Henschel Hs 121 was the first aircraft built by the German Henschel company. It was a high-wing monoplane with an inline engine, fixed undercarriage and single, open cockpit, designed as an advanced trainer. Only one aircraft was produced, in 1933–4, as a testpiece for the Air Ministry.

<span class="mw-page-title-main">SABCA S.2</span> Type of aircraft

The SABCA S.2 was an airliner built in Belgium in 1926.

References