 | This article needs additional citations for verification .(December 2015) |
The Hornslet Wind Turbine Collapse was a collapse of a wind turbine on 22 February 2008.
It is one of only a few structural collapses[ clarification needed ] that have been captured on film.[ citation needed ]
The wind turbine was a Nordtank NTK 600-180/43 with a maximum generation capacity of 600 kW at Hornslet, Denmark at 56°20′42.97″N10°10′13.03″E / 56.3452694°N 10.1702861°E . It was operated by Syddjurs and inaugurated on 23 December 1996. The rotor of this turbine, which carried in the Danish wind turbine register the designation 570715000000021503, had a diameter of 43 metres. It was mounted on a free-standing steel-tube tower 44.5 metres above ground.
The turbine was the first and northernmost turbine of Hyacintvej Wind Park, which consists of five similar wind turbines, arranged in a line running south-southeasterly - north-northwesterly.[ citation needed ]
After a malfunction from a worn brake mechanism, a service team from Vestas were called. Vestas engineers checked and repaired the wind turbine brake on the morning of 22 February 2008. At the last routine inspection it was noted that the main gear of the turbine was also making unusual noises and a sophisticated endoscopic inspection of the gear was planned, but as result of its high cost it was not undertaken immediately.
After repair and several checks of the brake, the turbine was restarted in order to bring it back into normal operation. At this time the wind was very strong. The airbrakes at the tip of the blades were turned on to control the speed of the turbine before it reached operational speed. After its generator was synchronized to the grid a noise from the nacelle prompted an attempt to stop the turbine manually.[ citation needed ]
A large crashing sound occurred, possibly as a result of the gear failing, at which point the turbine began to oscillate strongly. The rotor then suddenly stopped but immediately started turning again. The rotor did not at first turn very fast, but it was now impossible to control the speed of rotation.[ citation needed ]
The tower was evacuated immediately, the airbrakes of the turbine had failed and as a strong wind blew the turbine started rotating faster and faster quickly reaching a speed far beyond its design tolerances. Service personnel contacted the police who established a security cordon of 400 metres around the turbine. 2.5 hours later, at about 3:20 pm, the blades began to disintegrate. One of the blades hit halfway along the tower which bent in the direction of the wind. The top half of the tower then sheared off at the bend and fell to the ground. The base of the tower remained standing. The debris of the turbine flew 200–500 metres away. No injuries were caused.[ citation needed ]
The collapse was filmed from a nearby farmhouse. The film was shown on several TV stations and is available online. The turbine was out of service until June 2008 and was eventually replaced by a new wind turbine of the same design.[ citation needed ]
A windmill is a structure that converts wind power into rotational energy using vanes called sails or blades, by tradition specifically to mill grain (gristmills), but in some parts of the English-speaking world, the term has also been extended to encompass windpumps, wind turbines, and other applications. The term wind engine is also sometimes used to describe such devices.
A windpump is a wind-driven device which is used for pumping water.
The Darrieus wind turbine is a type of vertical axis wind turbine (VAWT) used to generate electricity from wind energy. The turbine consists of a number of curved aerofoil blades mounted on a rotating shaft or framework. The curvature of the blades allows the blade to be stressed only in tension at high rotating speeds. There are several closely related wind turbines that use straight blades. This design of the turbine was patented by Georges Jean Marie Darrieus, a French aeronautical engineer; filing for the patent was October 1, 1926. There are major difficulties in protecting the Darrieus turbine from extreme wind conditions and in making it self-starting.
The OPG 7 Gomberg Turbine was a Vestas model V80-1.8MW wind turbine in Pickering, Ontario. At the time of its construction, it was one of the largest wind turbines in North America, a 117-metre high wind machine commissioned in 2001 and designed to produce enough power to satisfy about 600 average households. This electricity was also emission-free.
Vestas Wind Systems A/S is a Danish manufacturer, seller, installer, and servicer of wind turbines that was founded in 1945. The company operates manufacturing plants in Denmark, Germany, the Netherlands, Taiwan, India, Italy, Romania, the United Kingdom, Spain, Sweden, Norway, Australia, China, Brazil, Poland and the United States, and employs 29,000 people globally.
Blade pitch or simply pitch refers to the angle of a blade in a fluid. The term has applications in aeronautics, shipping, and other fields.
Wind turbine design is the process of defining the form and configuration of a wind turbine to extract energy from the wind. An installation consists of the systems needed to capture the wind's energy, point the turbine into the wind, convert mechanical rotation into electrical power, and other systems to start, stop, and control the turbine.
Unconventional wind turbines are those that differ significantly from the most common types in use.
Wind power has been used as long as humans have put sails into the wind. Wind-powered machines used to grind grain and pump water — the windmill and wind pump — were developed in what is now Iran, Afghanistan, and Pakistan by the 9th century. Wind power was widely available and not confined to the banks of fast-flowing streams, or later, requiring sources of fuel. Wind-powered pumps drained the polders of the Netherlands, and in arid regions such as the American midwest or the Australian outback, wind pumps provided water for livestock and steam engines.
The Éolienne Bollée is an unusual wind turbine, unique for having a stator and a rotor, as a water turbine has. The eponymous invention was first patented in 1868 by Ernest Sylvain Bollée in France. A further patent dated 1885 differed mainly in two ways: First, in how the turbine was turned to face the wind and second, in an improvement which increased the flow of wind through the turbine was added. The turbines built according to the 1885 patent were commercially successful.
The Vestas V90-2MW is a three-bladed upwind horizontal-axis wind turbine designed and manufactured by Vestas with versions for wind classes IIA and IIIA.
The wind power industry is involved with the design, manufacture, construction, and maintenance of wind turbines. The modern wind power industry began in 1979 with the serial production of wind turbines by Danish manufacturers. The industry is undergoing a period of rapid globalization and consolidation.
Wind-powered vehicles derive their power from sails, kites or rotors and ride on wheels—which may be linked to a wind-powered rotor—or runners. Whether powered by sail, kite or rotor, these vehicles share a common trait: As the vehicle increases in speed, the advancing airfoil encounters an increasing apparent wind at an angle of attack that is increasingly smaller. At the same time, such vehicles are subject to relatively low forward resistance, compared with traditional sailing craft. As a result, such vehicles are often capable of speeds exceeding that of the wind.
Carno is a wind farm of 68 turbines which started operation in October 1996. It covers an area of over 600 hectares on Trannon Moor, a plateau to the west of the village of Carno in Powys, Mid Wales, 400 metres (1,300 ft) above sea level.
A wind turbine is a device that converts the kinetic energy of wind into electrical energy. As of 2020, hundreds of thousands of large turbines, in installations known as wind farms, were generating over 650 gigawatts of power, with 60 GW added each year. Wind turbines are an increasingly important source of intermittent renewable energy, and are used in many countries to lower energy costs and reduce reliance on fossil fuels. One study claimed that, as of 2009, wind had the "lowest relative greenhouse gas emissions, the least water consumption demands and the most favorable social impacts" compared to photovoltaic, hydro, geothermal, coal and gas energy sources.
The yaw system of wind turbines is the component responsible for the orientation of the wind turbine rotor towards the wind.
Starting in 1975, NASA managed a program for the United States Department of Energy and the United States Department of Interior to develop utility-scale wind turbines for electric power, in response to the increase in oil prices. A number of the world's largest wind turbines were developed and tested under this pioneering program. The program was an attempt to leap well beyond the then-current state of the art of wind turbine generators, and developed a number of technologies later adopted by the wind turbine industry. The development of the commercial industry however was delayed by a significant decrease in competing energy prices during the 1980s.
The Delabole wind farm was the first commercial onshore wind farm built in the United Kingdom, in November 1991. This field of wind turbines was initially developed by Windelectric Management Ltd.
The Gamma 60 wind turbine, a 1.5 MW two-bladed upwind horizontal axis wind turbine, was installed by Wind Energy Systems Taranto S.p.A. (WEST) at Alta Nurra, Sardinia, Italy in April 1992. Founded on original research and development work by NASA and Hamilton Standard, the Gamma 60 wind turbine was the world's first variable speed wind turbine with a teetering hinge.
A vertical-axis wind turbine (VAWT) is a type of wind turbine where the main rotor shaft is set transverse to the wind while the main components are located at the base of the turbine. This arrangement allows the generator and gearbox to be located close to the ground, facilitating service and repair. VAWTs do not need to be pointed into the wind, which removes the need for wind-sensing and orientation mechanisms. Major drawbacks for the early designs included the significant torque ripple during each revolution, and the large bending moments on the blades. Later designs addressed the torque ripple by sweeping the blades helically. Savonius vertical-axis wind turbines (VAWT) are not widespread, but their simplicity and better performance in disturbed flow-fields, compared to small horizontal-axis wind turbines (HAWT) make them a good alternative for distributed generation devices in an urban environment.