 | |
 IBM System/360 Model 65 | |
| Manufacturer | International Business Machines Corporation (IBM) |
|---|---|
| Product family | System/360 |
| Release date | March 1965 |
| Discontinued | March 1974 |
| Memory | 128 KB–1 MB Core |
The IBM System/360 Model 65 is a member of the IBM System/360 family of computers. It was announced April 1965, and replaced two models, the Model 60 and Model 62, announced one year prior but never shipped. [1] It was discontinued in March 1974. [2]
There are six submodels of the S/360-65. [3] : 5 They vary by the amount of core memory with which the system is offered. The G65, H65, I65, IH65 and J65 submodels are configured with 128K, 256K, 512K, 768K or 1M of core memory, respectively. [3] By 1974 the smallest G submodel had been discontinued. The MP (multiprocessor) model was added supporting from 512K to 2MB of system memory. [4] The system can also attach IBM 2361 Large Capacity Storage (LCS) modules which provide up to 8MB of additional storage, however with a considerably slower memory cycle time of 8 microseconds compared to the 750 nanoseconds of processor storage. [3]
The performance of the Model 65 is more than triple that of a S/360-50, whereas the Model 75, the next step up, was less than double that of a S/360-65. [5]
The Model 65 implements the complete System/360 "universal instruction set" architecture, including floating-point, decimal, and character operations as standard features. It offers optional compatibility features to permit emulation of the IBM 7040 and 7044 and the IBM 7090 and 7094, [6] the IBM 7070 and 7074, [7] and the IBM 7080. [8]
Main memory in the Model 65 can be interleaved for faster access. [3]
The Model 65, like the Model 67, was available in a dual-CPU offering. Multi-processing (Dual-CPU) systems have two I65s, IH65s or J65s, and "the main storage of each processing unit is accessible to the other." [3]
The Model 65 supports BPS, DOS/360, TOS/360, and OS/360 - PCP, MFT and MVT. [4] MVT was a fairly typical choice of operating system for the Model 65.
A special version of MVT, called MP65, is needed for the multi-process (dual CPU) Model. [9] MP65 uses special CPU-to-CPU/Multisystem mode instructions, such as Write Direct. The Model 65MP implements asymmetric multiprocessing: "certain input output equipment is accessible from only one processor." [10]
Time-sharing can be provided on a Model 65 using IBM's Time Sharing Option (TSO). [11]
IBM mainframes are large computer systems produced by IBM since 1952. During the 1960s and 1970s, IBM dominated the computer market with the 7000 series and the later System/360, followed by the System/370. Current mainframe computers in IBM's line of business computers are developments of the basic design of the System/360.
The IBM System/360 (S/360) is a family of mainframe computer systems that was announced by IBM on April 7, 1964, and delivered between 1965 and 1978. It was the first family of computers designed to cover both commercial and scientific applications and a complete range of applications from small to large. The design distinguished between architecture and implementation, allowing IBM to release a suite of compatible designs at different prices. All but the only partially compatible Model 44 and the most expensive systems use microcode to implement the instruction set, featuring 8-bit byte addressing and fixed point binary, fixed point decimal and hexadecimal floating-point calculations.
The IBM System/370 (S/370) is a range of IBM mainframe computers announced as the successors to the System/360 family on June 30, 1970. The series mostly maintains backward compatibility with the S/360, allowing an easy migration path for customers; this, plus improved performance, were the dominant themes of the product announcement.
The IBM 7090 is a second-generation transistorized version of the earlier IBM 709 vacuum tube mainframe computer that was designed for "large-scale scientific and technological applications". The 7090 is the fourth member of the IBM 700/7000 series scientific computers. The first 7090 installation was in December 1959. In 1960, a typical system sold for $2.9 million or could be rented for $63,500 a month.
The IBM 700/7000 series is a series of large-scale (mainframe) computer systems that were made by IBM through the 1950s and early 1960s. The series includes several different, incompatible processor architectures. The 700s use vacuum-tube logic and were made obsolete by the introduction of the transistorized 7000s. The 7000s, in turn, were eventually replaced with System/360, which was announced in 1964. However the 360/65, the first 360 powerful enough to replace 7000s, did not become available until November 1965. Early problems with OS/360 and the high cost of converting software kept many 7000s in service for years afterward.
The IBM 7040 was a historic but short-lived model of transistor computer built in the 1960s.
IBSYS is the name of a discontinued tape-based operating system that IBM supplied with its IBM 709, IBM 7090 and IBM 7094 computers, and of a significantly different, though similar operating system provided with IBM 7040 and IBM 7044 computers. IBSYS was based on FORTRAN Monitor System (FMS) and Bell Labs' "BESYS" rather than the SHARE Operating System. IBSYS directly supported several older computer language compilers and assemblers on the $EXECUTE card: 9PAC, FORTRAN and IBSFAP. Newer language processors ran under IBJOB.
In computing, channel I/O is a high-performance input/output (I/O) architecture that is implemented in various forms on a number of computer architectures, especially on mainframe computers. In the past, channels were generally implemented with custom devices, variously named channel, I/O processor, I/O controller, I/O synchronizer, or DMA controller.
IBM 7070 is a decimal-architecture intermediate data-processing system that was introduced by IBM in 1958. It was part of the IBM 700/7000 series, and was based on discrete transistors rather than the vacuum tubes of the 1950s. It was the company's first transistorized stored-program computer.
The IBM 7080 was a variable word length BCD transistor computer in the IBM 700/7000 series commercial architecture line, introduced in August 1961, that provided an upgrade path from the vacuum-tube IBM 705 computer.
The history of IBM mainframe operating systems is significant within the history of mainframe operating systems, because of IBM's long-standing position as the world's largest hardware supplier of mainframe computers. IBM mainframes run operating systems supplied by IBM and by third parties.
OS/360, officially known as IBM System/360 Operating System, is a discontinued batch processing operating system developed by IBM for their then-new System/360 mainframe computer, announced in 1964; it was influenced by the earlier IBSYS/IBJOB and Input/Output Control System (IOCS) packages for the IBM 7090/7094 and even more so by the PR155 Operating System for the IBM 1410/7010 processors. It was one of the earliest operating systems to require the computer hardware to include at least one direct access storage device.
Input/Output Control System (IOCS) is any of several packages on early IBM entry-level and mainframe computers that provided low level access to records on peripheral equipment. IOCS provides functionality similar to 1960s packages from other vendors, e.g., File Control Processor (FCP) in RCA 3301 Realcom Operating System, GEFRC in GECOS, and to the later Record Management Services (RMS) in DEC VAX/VMS
Attached Support Processor (ASP) was an implementation of loosely coupled multiprocessing for IBM's OS/360 operating system. IBM later changed the name to Asymmetrical multiProcessor but retained the acronym ASP.
The IBM System/360 Model 50 is a member of the IBM System/360 family of computers. The Model 50 was announced in April 1964 with the other initial models of the family, and first shipped in August 1965 to the Bank of America.
The IBM System/360 Model 25 is a low-end member of the IBM System/360 family. It was announced on January 3, 1968, 3 years before the IBM System/360 Model 22, as a "bridge between its old and new computing systems".
The IBM System/360 Model 85 is a high-end member of the System/360 family of computers, with many advanced features, and was announced in January 1968 and first shipped in December 1969. IBM built only about 30 360/85 systems because of "a recession in progress".
The IBM System/370 Model 165 were jointly announced June 30, 1970 as "designed for ... the Seventies." That same day IBM announced the 370/195. They were the first three models of the IBM System/370 line of computers.
The IBM System/370 Model 168 and Model 158 were both announced on August 2, 1972. Prior 370 systems had not "offered virtual storage capability, which was to be a hallmark of the 370 line," and some said that the 168 and 158 were the first "real 370" products. By contrast, "in 1972, the System/370 Advanced Function was released and had new Address Relocation Hardware and now supported four new operating systems ."
| Models |
|  | ||||
|---|---|---|---|---|---|---|
| Peripherals | ||||||
| Software | ||||||
| Innovations | ||||||
| Related | ||||||