Impossible wheel

Last updated

The impossible wheel, also known as the BC wheel [1] (after the comic strip B.C.), represents the most basic type of unicycle, consisting of a single, spoked wheel with pegs extending from the axle. The rider mounts the wheel by jumping onto the pegs while in motion or by putting one foot onto one plate or peg and pushing along like a skateboard.

Contents

This device has no drivetrain, so when forward inertia runs out due to gravity and friction, the ride ends. Newer BC wheels use plates which hang below the axle instead of pegs in line with the axle. This makes them easier to ride since the center of gravity is lower.

The unicycling community favors the term BC wheel because the device is not actually impossible to ride; proficiency can be gained with a few hours of practice. Tricks, such as hopping, drops, grinds, and spins, are possible.

Ultimate wheel

An ultimate wheel of wooden construction Ultimate wheel.jpg
An ultimate wheel of wooden construction

An ultimate wheel is a wheel with two pedals directly connected – similar to a unicycle and impossible wheel. It has no seat or frame but offset and functional pedals. There are several different designs: the most popular involves a solid or semi-solid disk inside a regular small bicycle wheel rim with the pedals attached directly to the disk. A less common style uses metal cross braces instead of wood.

Some mounting and riding techniques include:

Regular mount
Have one pedal lower than the other, and step up to the other pedal
Free jump mount
Release the wheel then jump onto the pedals
Standard riding
Simply being able to ride without falling off
Turning
Turning by twisting your body and the wheel
Bunny hop
Grabbing on the wheel and hopping off the ground
Idling
Remaining in one place with one pedal down and one pedal up, rocking the wheel back and forth to keep balance
Reverse
Riding the wheel backwards

See also

Related Research Articles

<span class="mw-page-title-main">Unicycle</span> One-wheeled mode of transportation

A unicycle is a vehicle that touches the ground with only one wheel. The most common variation has a frame with a saddle, and has a pedal-driven direct-drive. A two speed hub is commercially available for faster unicycling. Unicycling is practiced professionally in circuses, by street performers, in festivals, and as a hobby. Unicycles have also been used to create new sports such as unicycle hockey. In recent years, unicycles have also been used in mountain unicycling, an activity similar to mountain biking or trials.

<span class="mw-page-title-main">Mountain unicycling</span> Adventure sport

Mountain unicycling is an adventure sport that consists of traversing rough terrain on a unicycle. Mountain unicycling (muni) is undertaken on similar terrain to mountain biking. However, muni requires much more attention to the microfeatures of the short distance in front of the wheel. Unicycles' lack of a freewheel means that descents must be controlled all the way, and the typical lack of a gear system prevents the rider from reaching high speeds. Muni usually takes place on specially designed unicycles, which are equipped with strong hubs, large, knobbly tires, high-grip pedals and rugged frames. Some are also equipped with rim or disc brakes, having the lever mounted under the nose of the saddle. The brake primarily helps to compensate the downhill-slope force, while more expert riders also use it to decelerate or stop.

<span class="mw-page-title-main">Tricycle</span> Three-wheeled self-powered vehicle

A tricycle, sometimes abbreviated to trike, is a human-powered three-wheeled vehicle.

<span class="mw-page-title-main">Unicycle trials</span>

Unicycle trials is a form of unicycling which involves participants attempting to ride a unicycle over obstacles without any part of the rider touching the ground. The obstacles traversed can be set up specifically for the purpose of unicycle trials, but are often walls, railings, ledges and other "street furniture" found in an urban environment. The sport is derived from bike trials and motorcycle trials.

<span class="mw-page-title-main">Penny-farthing</span> Bicycle with a large front wheel and a much smaller rear wheel

The penny-farthing, also known as a high wheel, high wheeler or ordinary, is an early type of bicycle. It was popular in the 1870s and 1880s, with its large front wheel providing high speeds, owing to it travelling a large distance for every rotation of the legs, and comfort, because the large wheel provided greater shock absorption.

<span class="mw-page-title-main">Velocipede</span> Human-powered land vehicle

A velocipede is a human-powered land vehicle with one or more wheels. The most common type of velocipede today is the bicycle.

<span class="mw-page-title-main">Bunny hop (cycling)</span> Bicycle trick

The bunny hop or bunnyhop, is a bicycle trick that allows the rider to launch their bike into the air as if jumping off a ramp. The pedals on the bicycle seem to stick to the rider's feet as the bike becomes airborne, much like how a skateboard seems to stick to the feet of the skater performing an Ollie. While the bunny hop can be quite challenging to learn, once mastered it opens up a whole new level of riding opportunities for both BMX and mountain bike rider alike.

<span class="mw-page-title-main">Roundabout (play)</span> Flat disk with bars on it that act as both hand-holds and something to lean against while riding

A roundabout, merry-go-round, or carousel, is piece of playground equipment, a flat disk, frequently about 2 to 3 metres in diameter, with bars on it that act as both hand-holds and something to lean against while riding. The disk can be made to spin by pushing or pulling on its handles, either by running around the outside, or by pulling and re-grabbing as it spins, from a stationary stance. If the disk is mounted at a tilt to the ground, after an initial push, the disk can be speeded up without further pushing or touching the ground. The trick is to have the rider(s) lean into the center of the disk while ascending and leaning out from the center when descending. It is the physics of angular momentum and also works for swings. Often found in school playgrounds and public parks, they offer riders a dizzying ride when either others spin the wheel, or by spinning it themselves by running around it, and then jumping on. People may take turns between riding and spinning. One type of roundabout which differs significantly in terms of how the rotary motion is provided is a Swedish device called the HAGS Pedal Roundabout, which resembles four small exercise bikes attached to a tubular steel ring, which travel on a circular steel rail on the ground. The ring is attached to a vertical pole in the center by four spokes. There is a driving wheel hidden under the casing of each of the "exercise bikes" and the roundabout is turned by the pedaling action of the riders.

<span class="mw-page-title-main">Freestyle BMX</span> Cycle sport

Freestyle BMX is bicycle motocross stunt riding on BMX bikes. It is an extreme sport descended from BMX racing that consists of five disciplines: street, park, vert, trails, and flatland. In June 2017, the International Olympic Committee announced that freestyle park was to be added as an Olympic event to the 2020 Summer Olympics.

<span class="mw-page-title-main">Flatland BMX</span>

Flatland is a freestyle BMX riding style performed on smooth flat surfaces that do not include any ramps, jumps, or grindrails. It is sometimes described as a form of artistic cycling with a blend of breakdancing.

Street unicycling is one of the latest developments in unicycling. The aim of the sport is to use natural/urban/specially made obstacles such as ledges, handrails and stairs in a given area to perform tricks that look good. The emphasis falls on technical proficiency, style and creativity. Street unicycling draws inspiration from skateboarding and bmx bike riding, with many similar tricks.

<span class="mw-page-title-main">Rim (wheel)</span> Outer part of a wheel on which the tire is mounted

The rim is the "outer edge of a wheel, holding the tire". It makes up the outer circular design of the wheel on which the inside edge of the tire is mounted on vehicles such as automobiles. For example, on a bicycle wheel the rim is a large hoop attached to the outer ends of the spokes of the wheel that holds the tire and tube. In cross-section, the rim is deep in the center and shallow at the outer edges, thus forming a "U" shape that supports the bead of the tire casing.

<span class="mw-page-title-main">Bicycle trailer</span> Cargo accessory for bicycles

A bicycle trailer is a motorless wheeled frame with a hitch system for transporting cargo by bicycle. It can greatly increase a bike's cargo capacity, allowing point-to-point haulage of objects up to 3 cubic metres in volume that weigh as much as 500 kg. However, very heavily loaded trailers may pose a danger to the cyclist and others, and the voluntary European standard EN 15918 therefore suggests a maximum load of 60 kg on trailers without brakes.

<span class="mw-page-title-main">Skateboard</span> Wheeled wooden board used for skateboarding

A skateboard is a type of sports equipment used for skateboarding. It is usually made of a specially designed 7–8-ply maple plywood deck and has polyurethane wheels attached to the underside by a pair of skateboarding trucks.

<span class="mw-page-title-main">Mountain bike trials</span>

Mountain bike trials, also known as observed trials, is a discipline of mountain biking in which the rider attempts to pass through an obstacle course without setting foot to ground. Derived from motorcycle trials, it originated in Catalonia, Spain as trialsín and is said to have been invented by Pere Pi, the father of Ot Pi, a world champion motorcycle trials rider. Pi's father had wanted his son to learn motorcycle trials by practicing on an ordinary bicycle.

<span class="mw-page-title-main">Dustin Kelm</span>

Dustin Kelm is a professional world champion and world record setting unicyclist, performing the UniShow around the world. He has performed and competed throughout North, South and Central America, Europe, Asia, Africa and the Caribbean. Dustin is a three time Unicycling Society of America expert freestyle national champion, a Unicycling Society of America mountain unicycling national champion and a UNICON freestyle World Champion.

Unicycle time trial records are performances that are not set in unicycle competitions. They require a separate organization. The unicycles used for these records generally belong to the "unlimited" category. In other words, there are no limits on wheel size, crank length or frame shape. The only rule is that they must have a single wheel and no motorized assistance.

References

  1. David K. Randall (July 3, 2007). "Have Wheel, Will Travel". New York Times . Retrieved 2012-02-29. a BC wheel, which is essentially a unicycle without a seat or pedals.

Impossible wheel

Ultimate wheel