This article needs additional citations for verification .(September 2021) |
A unicycle is a vehicle that touches the ground with only one wheel. The most common variation has a frame with a saddle, and has a pedal-driven direct-drive. A two speed hub is commercially available for faster unicycling. Unicycling is practiced professionally in circuses, by street performers, in festivals, and as a hobby. Unicycles have also been used to create new sports such as unicycle hockey. In recent years, unicycles have also been used in mountain unicycling, an activity similar to mountain biking or trials.
US patents for single-wheeled 'velocipedes' were published in 1869 by Frederick Myers [1] and in 1881 by Battista Scuri. [2]
Unicycle design has developed since the Penny Farthing and later the advent of the first unicycle into many variations including: the seatless unicycle ("ultimate wheel") the tall ("giraffe") unicycle and "2-wheelers" or "3-wheelers" (multiple wheels stacked directly on top of each other).[ citation needed ] During the late 1980s some extreme sportsmen took an interest in the unicycle and modified unicycles to enable them to engage in off-road or mountain unicycling, trials unicycling and street unicycling.
Bicycles, tricycles and quadracycles share (with minor variations) several basic parts including wheels, pedals, cranks, forks, and the saddle with unicycles. Without a rider, unicycles lack stability – however, a proficient unicyclist is usually more stable than a similarly proficient rider on a bicycle as the wheel is not constrained by the linear axis of a frame. Unicycles usually, but not always, lack brakes, gears, and the ability to freewheel. Given these differences, the injuries that can occur from unicycle use tend to be different from that of bicycle use. In particular, head injuries are significantly less likely among unicycle use compared to bicycle use. [3]
Unicycles have a few key parts:
The wheel is usually similar to a bicycle wheel with a special hub designed so the axle is a fixed part of the hub. This means the rotation of the cranks directly controls the rotation of the wheel (called direct-drive). The frame sits on top of the axle bearings, while the cranks attach to the ends of the axle, and the seatpost slides into the frame to allow the saddle to be height adjusted.
Types of unicycle include:
Each type has many combinations of frame strength, wheel diameter, and crank length.
Generally used for flatland skills and freestyle routines, freestyle unicycles typically have a relatively high seatpost, a narrow saddle, and a squared fork (used for one-footed tricks). These unicycles are used similarly to flatland bicycles. Wheel size is usually 20 inches (510 mm), but smaller riders may use 16-or-12-inch (410 or 300 mm) unicycles. Some people prefer 24-inch (610 mm) wheels. Many freestyle unicyclists will use white tires to avoid tire marks when riding indoors.
Designed for unicycle trials, these unicycles are stronger than standard unicycles in order to withstand the stresses caused by jumping, dropping, and supporting the weight of the unicycle and rider on components such as the pedals and cranks. Many trials unicycles also have wide, 19-or-20-inch (480-or-510-millimetre) knobby tires to absorb some of the impact on drops.
Mountain unicycling (abbreviated to muni or mUni) consists of riding specialized unicycles on mountain bike trails or otherwise off-roading. Mountain unicycles have thicker, wider tires for better traction. Riders may occasionally lower air pressure for increased shock absorption. Many riders choose to use long cranks to increase power when riding up hills and over rough terrain. A disc brake is sometimes used for descents; the brake handle is attached to the underside of the handle on the front of the saddle.
Used for long distances, these unicycles are specially made to cover distances. They have a large wheel diameter, between 26 and 36 in (660 and 910 mm), so more distance is covered in less pedal rotation. A 36″ unicycle made by the Coker Tire company started the big wheel trend. [4] Some variations on the traditional touring unicycle include the Schlumpf "GUni" (geared unicycle), which uses a two-speed internal fixed-geared hub. Larger direct-drive wheels tend to have shorter cranks to allow for easier cadence and more speed. Geared wheels, with an effective diameter larger than the wheel itself, tend to use longer cranks to increase torque as they are not required to achieve such high cadences as direct-drive wheels, but demand greater force per pedal stroke.
Training aids are sometimes used to make it easier to become comfortable with riding a unicycle. One method for training is using a spotter to make riding easier. Another method is finding a narrow hallway that can be used to help alleviate left and right balancing while allowing a beginner to focus on forward and backward balance. Equally, riding back and forth between two chairs, faced back to back, while holding on to the chair backs allows the user to gauge how to appropriately position oneself before setting off. Using props such as sticks or ski poles is generally discouraged as they hinder balance and create dependence. A fall onto props could also cause serious injury. [12]
Traditionally, unicycling has been seen as a circus skill which has been performed at events to entertain the public in the circus or during parades, carnivals or street festivals. Recent developments in the strength and durability of bicycle (and consequently unicycle) parts have given rise to many new activities including trials unicycling and mountain unicycling. Unicycling is arguably[ weasel words ] now as much a competitive sport and recreational pursuit as an entertainment activity.
The principal types of unicycling are:
Unicycling is also performed as a team sport.
Unicycle basketball uses a regulation basketball on a regular basketball court with the same rules, e.g., one must dribble the ball while riding. There are a number of rules that are particular to unicycle basketball as well, e.g., a player must be mounted on the unicycle when in-bounding the ball. Unicycle basketball is usually played using 24 inches (610 mm) or smaller unicycles, and using plastic pedals, both to preserve the court and the players' shins. In North America, regular unicycle basketball games are organized in Berkeley, San Luis Obispo, Detroit, Phoenix, Minneapolis, and Toronto. Switzerland, France, Germany and Puerto Rico are all field teams. The Puerto Rico All Star Unicycling Basketball Team has been one of the dominant teams and has won several world championships.
Unicycle hockey follows rules basically similar to rink hockey, using a tennis ball and ice-hockey sticks. Play is mostly non-contact. The sport has active leagues in Germany, Switzerland, Australia and the UK and international tournaments held at least bi-annually. Tournaments in the UK are held by various teams across the country usually in sports halls, but occasionally outside. Each tournament lasts a day and around 8 teams normally compete in a round-robin league with the winner being whoever has the most points. If two teams have the same number of points the winner can be decided by goal difference or a penalty shoot-out.
UNICON, Eurocycle and APUC are regular international unicycling conventions.
The biennial UNICON (International Unicycling Convention), sanctioned by the International Unicycling Federation, comprises all major unicycling disciplines and is a major event on the international unicycling calendar. Events include: artistic (group, pairs, individual, standard skill Archived 2008-05-09 at the Wayback Machine , open-X), track racing (100 metres, 400 metres, 800 metres, 30 metres walk the wheel, 50 metres one-foot), 10 kilometres, marathon (42.195 km), muni (cross-country, uphill, downhill, North Shore downhill), trials, basketball and hockey. [40]
The Eurocycle (EUROpean uniCYCLE meeting) is a similar convention but based in Europe.
APUC , the Asia Pacific Unicycle Championships, are held biannually, alternately with Unicon. The first APUC, in 2007, was in Singapore. Subsequently, the event has been held in Hong Kong (2009), Seoul (2011), Canberra (2013), and Singapore (2015).
EUC, the Extreme Unicycle Championship, is the convention for urban unicycling (Street, Trials and Flatland). The event is held in two editions: summer and winter. Winter EUC is usually held at Cologne, Germany, while locations of the summer edition vary. [41]
The world's first multi-stage unicycle race, Ride the Lobster, took place in Nova Scotia in June 2008. Some 35 teams from 14 countries competed over a total distance of 800 km. [42] Each team consisted of a maximum of 3 riders and 1 support person.
Unicross, or unicycle cyclocross is an emerging race format in which unicycles race over a cyclocross course.
Unicycle makers include:
A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-assisted, pedal-driven, single-track vehicle, with two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.
Mountain unicycling is an adventure sport that consists of traversing rough terrain on a unicycle. Mountain unicycling (muni) is undertaken on similar terrain to mountain biking. However, muni requires much more attention to the microfeatures of the short distance in front of the wheel. Unicycles' lack of a freewheel means that descents must be controlled all the way, and the typical lack of a gear system prevents the rider from reaching high speeds. Muni usually takes place on specially designed unicycles, which are equipped with strong hubs, large, knobbly tires, high-grip pedals and rugged frames. Some are also equipped with rim or disc brakes, having the lever mounted under the nose of the saddle. The brake primarily helps to compensate the downhill-slope force, while more expert riders also use it to decelerate or stop.
A tandem bicycle or twin is a bicycle designed to be ridden by more than one person. The term tandem refers to the seating arrangement, not the number of riders. Patents related to tandem bicycles date from the mid 1880s. Tandems can reach higher speeds than the same riders on single bicycles, and tandem bicycle racing exists. As with bicycles for single riders, there are many variations that have been developed over the years.
Unicycle trials is a form of unicycling which involves participants attempting to ride a unicycle over obstacles without any part of the rider touching the ground. The obstacles traversed can be set up specifically for the purpose of unicycle trials, but are often walls, railings, ledges and other "street furniture" found in an urban environment. The sport is derived from bike trials and motorcycle trials.
The penny-farthing, also known as a high wheel, high wheeler or ordinary, is an early type of bicycle. It was popular in the 1870s and 1880s, with its large front wheel providing high speeds, owing to it travelling a large distance for every rotation of the wheel. These bicycles had solid rubber tires and as a consequence the only shock absorption was in the saddle.
The crankset or chainset is the component of a bicycle drivetrain that converts the reciprocating motion of the rider's legs into rotational motion used to drive the chain or belt, which in turn drives the rear wheel. It consists of one or more sprockets, also called chainrings or chainwheels attached to the cranks, arms, or crankarms to which the pedals attach. It is connected to the rider by the pedals, to the bicycle frame by the bottom bracket, and to the rear sprocket, cassette or freewheel via the chain.
Kris Holm is a Canadian best known for riding a unicycle in off-road conditions. He has ridden since 1985 and is considered one of the pioneers of off-road unicycling, and is the world's best-known unicyclist. He is the founder of competitive unicycle trials and was the 1999 North American, 2002 World, and 2005 European unicycle trials champion. He also held the unicycle sidehop world record from 1998-2004, and performed trials demonstrations with the Norco Factory Trials Team from 1998-2006.
A fixed-gear bicycle is a bicycle that has a drivetrain with no freewheel mechanism such that the pedals always will spin together with the rear wheel. The freewheel was developed early in the history of bicycle design but the fixed-gear bicycle remained the standard track racing design. More recently the "fixie" has become a popular alternative among mainly urban cyclists, offering the advantage of simplicity compared with the standard multi-geared bicycle.
Unicon, previously known as UNICON, is the World Unicycling Convention and Championships sanctioned by the International Unicycling Federation (IUF).
Freestyle BMX is bicycle motocross stunt riding on BMX bikes. It is an extreme sport descended from BMX racing that consists of five disciplines: street, park, vert, trails, and flatland. In June 2017, the International Olympic Committee announced that freestyle park was to be added as an Olympic event to the 2020 Summer Olympics.
Flatland is a freestyle BMX riding style performed on smooth flat surfaces that do not include any ramps, jumps, or grindrails. It is sometimes described as a form of artistic cycling with a blend of breakdancing.
Bicycle suspension is the system, or systems, used to suspend the rider and bicycle in order to insulate them from the roughness of the terrain. Bicycle suspension is used primarily on mountain bikes, but is also common on hybrid bicycles.
The following outline is provided as an overview of and topical guide to bicycles:
Mountain bike trials, also known as observed trials, is a discipline of mountain biking in which the rider attempts to pass through an obstacle course without setting foot to ground. Derived from motorcycle trials, it originated in Catalonia, Spain as trialsín and is said to have been invented by Pere Pi, the father of Ot Pi, a world champion motorcycle trials rider. Pi's father had wanted his son to learn motorcycle trials by practicing on an ordinary bicycle.
Dustin Kelm is a professional world champion and world record setting unicyclist, performing the UniShow around the world. He has performed and competed throughout North, South and Central America, Europe, Asia, Africa and the Caribbean. Dustin is a three time Unicycling Society of America expert freestyle national champion, a Unicycling Society of America mountain unicycling national champion and a UNICON freestyle World Champion.
The Asia-Pacific Unicycle Competition is a regional unicycling games event that is held biennially, in alternative years from the Unicycling World Championships Unicon. The event has typically been held over a weekend where competitors from around Asia-Pacific gather in various unicycle games.
Roger William Haun III is a US-born Ghanaian unicyclist. He is the first person to win medals at the Unicycle World Championships for Ghana by taking a silver and bronze in 2022 as well as gold and bronze in 2024.
Unicycle time trial records are performances that are not set in unicycle competitions. They require a separate organization. The unicycles used for these records generally belong to the "unlimited" category. In other words, there are no limits on wheel size, crank length or frame shape. The only rule is that they must have a single wheel and no motorized assistance.
a BC wheel, which is essentially a unicycle without a seat or pedals.