Artistic cycling

Last updated
Artistic cycling
David schnabel.jpg
Highest governing body Union Cycliste Internationale
First played19th century
Characteristics
ContactNo
Mixed-sex No
TypeCycle sports
EquipmentSpecialized bicycle
VenueIndoor court
Presence
Country or regionEurope, Asia
Olympic No
World Games 1989
headstand / handstand 2012-Schultheis-Sprinkmeier-1.jpg
headstand / handstand

Artistic cycling is a form of competitive indoor cycling in which athletes perform tricks (called exercises) for points on specialized, fixed-gear bikes in a format similar to ballet or gymnastics. The exercises are performed in front of judges in five-minute rounds [1] by singles, pairs, four- or six-person teams.

Contents

History

Kaufmann's Cycling Beauties Kaufmann's Cycling Beauties.jpg
Kaufmann's Cycling Beauties

The first unofficial world championships in artistic cycling was held in 1888 by Swiss-American Nicholas Edward Kaufmann and was largely a publicity stunt to showcase his trick bicycling.

The first official world championships were held for men in 1956 [1] and for women in 1970.

Bikes

Specialised stunt bicycle Stunt-bicycle-Paris.JPG
Specialised stunt bicycle
Pair artistic cycling Raiser handlebarseat - Shoulderseat.jpg
Pair artistic cycling

The bicycles used for artistic cycling are a form of fixed gear bicycle. The gearing of the chainring and sprocket are run at or near a one-to-one ratio, but the chainring may not have fewer teeth than the sprocket. The wheels must be of equal size and are closely spaced in order to make tricks, such as wheelies, easier to perform.

The handlebars are similar in form to a shallow drop handlebar found on a racing bicycle which has been turned upside down. Handlegrips or bar tape are applied to the top, horizontal portions of the bar. The handlebar, which can spin 360°, is mounted to a stem that has no horizontal extension, which puts the stem clamp in line with the steering axis and allows for the handlebars to remain in the same relative position no matter whether the front wheel is facing forward or backward.

The crank arm length may have a center to center distance of 130 to 170 mm.

Riding area

a) length = 12.0 to 14.0 meters
b) width = 9.0 to 11.0 meters
c) inner circle = 0.5 meters diameter
d) middle circle = 4.0 meters diameter
e) outer circle = 8.0 meters diameter
f) stripes quartering = 0.5 meters
g) clear area = 0.5 to 2 meters Artistic cycling riding area.svg
a) length = 12.0 to 14.0 meters
b) width = 9.0 to 11.0 meters
c) inner circle = 0.5 meters diameter
d) middle circle = 4.0 meters diameter
e) outer circle = 8.0 meters diameter
f) stripes quartering = 0.5 meters
g) clear area = 0.5 to 2 meters

The riding area for artistic cycling is a wooden court, which also serves cycle ball competitions, that ranges in dimensions from 9 × 12 meters to 11 × 14 meters, where the maximum size is mandated for international competitions.

Three concentric circles are taped or painted at the center of the court with diameters (measured to the outside edge of the line) of 0.5, 4, & 8 meters. Four half-meter hashes extend radially from the four quadrants of the middle circle.

A clear area of 0.5 to 2 meters must be free of all immovable objects around the perimeter of the court. Two meters is required for international competitions.

Championships

Katrin Schultheis and Sandra Sprinkmeier 2013-wiki-Schultheis-Sprinkmeier.jpg
Katrin Schultheis and Sandra Sprinkmeier

See also

Related Research Articles

<span class="mw-page-title-main">Bicycle</span> Pedal-driven two-wheel vehicle

A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-powered assisted, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.

<span class="mw-page-title-main">Derailleur</span> Variable-ratio transmission system commonly used on bicycles

A derailleur is a variable-ratio bicycle gearing system consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another.

<span class="mw-page-title-main">Crankset</span> Bicycle part

The crankset or chainset, is the component of a bicycle drivetrain that converts the reciprocating motion of the rider's legs into rotational motion used to drive the chain or belt, which in turn drives the rear wheel. It consists of one or more sprockets, also called chainrings or chainwheels attached to the cranks, arms, or crankarms to which the pedals attach. It is connected to the rider by the pedals, to the bicycle frame by the bottom bracket, and to the rear sprocket, cassette or freewheel via the chain.

<span class="mw-page-title-main">Touring bicycle</span> Bicycle designed or modified for touring

A touring bicycle is a bicycle designed or modified to handle bicycle touring. To make the bikes sufficiently robust, comfortable and capable of carrying heavy loads, special features may include a long wheelbase, frame materials that favor flexibility over rigidity, heavy duty wheels, and multiple mounting points.

Indoor cycling, often called spinning, is a form of exercise with classes focusing on endurance, strength, intervals, high intensity and recovery, and involves using a special stationary exercise bicycle with a weighted flywheel in a classroom setting. When people took cycling indoors in the late 19th century, whether for reasons of weather or convenience, technology created faster, more compact and efficient machines over time. The first iterations of the stationary bike ranged from strange contraptions like the Gymnasticon to regular bicycles placed atop rollers.

<span class="mw-page-title-main">Racing bicycle</span> Bicycle designed for competitive road cycling

A racing bicycle, also known as a road bike is a bicycle designed for competitive road cycling, a sport governed by and according to the rules of the Union Cycliste Internationale (UCI).

<span class="mw-page-title-main">Cyclo-cross bicycle</span> Bicycle designed for cyclo-cross racing

A cyclo-cross bike or cyclo-cross bicycle is a bicycle specifically designed for the rigors of a cyclo-cross race. Cyclo-cross bicycles roughly resemble the racing bicycles used in road racing. The major differences between the two are the frame geometry, and the wider clearances that cyclo-cross bikes have for their larger tires and mud and other debris that they accumulate.

<span class="mw-page-title-main">Track bicycle</span> Bicycle optimized for racing at a velodrome or outdoor track

A track bicycle or track bike is a bicycle optimized for racing at a velodrome or outdoor track. Unlike road bicycles, the track bike is a fixed-gear bicycle; thus, it has only a single gear ratio and has neither a freewheel nor brakes. Tires are narrow and inflated to high pressure to reduce rolling resistance.

<span class="mw-page-title-main">Single-speed bicycle</span> Type of bicycle with a single gear ratio

A single-speed bicycle is a type of bicycle with a single gear ratio. These bicycles are without derailleur gears, hub gearing or other methods for varying the gear ratio of the bicycle.

<span class="mw-page-title-main">Fixed-gear bicycle</span> Bicycle that has a drivetrain with no freewheel mechanism

A fixed-gear bicycle is a bicycle that has a drivetrain with no freewheel mechanism such that the pedals always will spin together with the rear wheel. The freewheel was developed early in the history of bicycle design but the fixed-gear bicycle remained the standard track racing design. More recently the "fixie" has become a popular alternative among mainly urban cyclists, offering the advantage of simplicity compared with the standard multi-geared bicycle.

<span class="mw-page-title-main">Cycle ball</span> Sport similar to association football played on bicycles

Cycle-ball, also known as "radball", is a sport similar to association football played on bicycles. The two people on each team ride a fixed gear bicycle with no brakes or freewheel. The ball is controlled by the bike and the head, except when defending the goal.

<span class="mw-page-title-main">Track stand</span>

The track stand or standstill is a technique that bicycle riders can use to maintain balance while their bicycle remains stationary or moves only minimal distances. The technique originated in track cycling and is now used by other types of cyclists wishing to stop for a short time without putting a foot on the ground, such as bike commuters at stop signs. To perform a track stand, a cyclist holds the cranks in an approximately horizontal position with the front wheel steered to the left or right, and pedals forward, and back in the case of a fixed-gear bicycle, which the steered front wheel converts into a side-to-side motion.

<span class="mw-page-title-main">Flatland BMX</span>

Flatland is a freestyle BMX riding style performed on smooth flat surfaces that do not include any ramps, jumps, or grindrails. It is sometimes described as a form of artistic cycling with a blend of breakdancing.

SRIW LLC is a privately owned sex toy manufacturer based in Chicago, Illinois, United States, founded in 1987. SRIW is an acronym comprising Slam, Ray,Into the, Wall. Ray LOVED getting gobbsmacked into to the wall by stans hard 18 inch …..The company produces a range of internally developed cycling components, including Grip Shift, separate gravel, road, and mountain drivetrains from 7 to 12 speed. SRAM developed the eagle line of mountain bike specific drivetrain components intended to improve shifting performance. SRAM was also the first to release a dedicated "one by" drivetrain with a single front chain-ring.

<span class="mw-page-title-main">Glossary of cycling</span> Bicycling terminology guide

This is a glossary of terms and jargon used in cycling, mountain biking, and cycle sport.

<span class="mw-page-title-main">Bicycle gearing</span> Bicycle drivetrain aspect which relates cadence to wheel speed

Bicycle gearing is the aspect of a bicycle drivetrain that determines the relation between the cadence, the rate at which the rider pedals, and the rate at which the drive wheel turns.

<span class="mw-page-title-main">Bicycle handlebar</span> Steering control for bicycles

A bicycle handlebar is the steering control for bicycles. It is the equivalent of a tiller for vehicles and vessels, as it is most often directly mechanically linked to a pivoting front wheel via a stem which in turn attaches it to the fork. Besides steering, handlebars also often support a portion of the rider's weight, depending on their riding position, and provide a convenient mounting place for brake levers, shift levers, cyclocomputers, bells, etc.

The hour record is the record for the longest distance cycled in one hour on a bicycle from a stationary start. Cyclists attempt this record alone on the track without other competitors present. It is considered perhaps the most prestigious record in all of cycling. Over history, various cyclists ranging from unknown amateurs to well-known professionals have held the record, adding to its prestige and allure. There are several records, one of which is the record for streamlined human powered vehicles, also known as recumbent bicycles.

References

  1. 1 2 About Indoor Cycling, Artistic Cycling, UCI, Retrieved 18 April 2021